Time-resolved 1H and 13C NMR spectroscopy for detailed analyses of the Azotobacter vinelandii mannuronan C-5 epimerase reaction

AlgE2, AlgE4, and AlgE6 are members of a family of mannuronan C-5 epimerases encoded by Azotobacter vinelandii, and are active in the biosynthesis of alginate, where they catalyze the post-polymerization conversion of beta-D-mannuronic acid residues into alpha-L-guluronic acid residues. To study the kinetics and mode of action of these enzymes, homopolymeric mannuronan and other alginate samples with various composition were epimerized by letting the enzymatic reaction take place in an NMR tube. Series of 1H NMR spectra were recorded to obtain a time-resolved picture of the epimerization progress and the formation of specific monomer sequences. Starting from mannuronan, guluronic acid contents of up to 82% were introduced by the enzymes, and the product specificity, substrate selectivity, and reaction rates have been investigated. To obtain direct information of the GulA-block formation, similar experiments were performed using a 13C-1-enriched mannuronan as substrate. The NMR results were found to be in good agreement with data obtained by a radioisotope assay based on 3H-5-labeled substrates.     

Expression of SA5K, a secretion antigen of Mycobacterium tuberculosis, inside human macrophages and in sputum from tuberculosis patients

The Azotobacter vinelandii mannuronan C-5 epimerases AlgE1-7 can be used to improve the properties of the commercially important polysaccharide alginate that is widely used in a variety of products, such as food and pharmaceuticals. Since lactic acid bacteria are generally regarded as safe, they are attractive candidates for production of the epimerases. A. vinelandii genes are GC-rich, in contrast to those of lactic acid bacteria, but we show here that significant expression levels of the epimerase AlgE6 can be obtained in Lactococcus lactis using the nisin-controlled expression system. A 1200-fold induction ratio was obtained resulting in an epimerase activity of 23900 dpm mg(-1) h(-1), using a tritiated alginate substrate. The epimerase was detected by Western blotting and nuclear magnetic resonance spectroscopy analysis of its reaction product showed that the enzyme displayed catalytic properties similar to those produced in Escherichia coli.     

The Pseudomonas fluorescens AlgG protein,but not its mannuronan C-5-epimerase activity,is needed for alginate polymer formation

Bacterial alginates are produced as 1-4-linked beta-D-mannuronan, followed by epimerization of some of the mannuronic acid residues to alpha-L-guluronic acid. Here we report the isolation of four different epimerization-defective point mutants of the periplasmic Pseudomonas fluorescens mannuronan C-5-epimerase AlgG. All mutations affected amino acids conserved among AlgG-epimerases and were clustered in a part of the enzyme also sharing some sequence similarity to a group of secreted epimerases previously reported in Azotobacter vinelandii. An algG-deletion mutant was constructed and found to produce predominantly a dimer containing a 4-deoxy-L-erythro-hex-4-enepyranosyluronate residue at the nonreducing end and a mannuronic acid residue at the reducing end. The production of this dimer is the result of the activity of an alginate lyase, AlgL, whose in vivo activity is much more limited in the presence of AlgG. A strain expressing both an epimerase-defective (point mutation) and a wild-type epimerase was constructed and shown to produce two types of alginate molecules: one class being pure mannuronan and the other having the wild-type content of guluronic acid residues. This formation of two distinct classes of polymers in a genetically pure cell line can be explained by assuming that AlgG is part of a periplasmic protein complex.     

The Azotobacter vinelandii AlgE mannuronan C-5-epimerase family is essential for the in vivo control of alginate monomer composition and for functional cyst formation

The industrially widely used polysaccharide alginate is a co-polymer of β- d -mannuronic acid and α- l -guluronic acid (G), and the G residues originate from a polymer-level epimerization process catalysed by mannuronan C-5-epimerases. In the genome of the alginate-producing bacterium Azotobacter vinelandii genes encoding one periplasmic (AlgG) and seven secreted such epimerases (AlgE1–7) have been identified. Here we report the generation of a strain (MS163171) in which all the algE genes were inactivated by deletion ( algE1–4 and algE6–7 ) or interruption ( algE5 ). Shake flask-grown MS163171 produced a polymer containing less than 2% G ( algG still active), while wild-type alginates contained 25% G. Interestingly, addition of proteases to the MS163171 growth medium resulted in a strong increase in the chain lengths of the alginates produced. MS163171 was found to be unable to form functional cysts, which is a desiccation-resistant differentiated form developed by A. vinelandii under certain environmental conditions. We also generated mutants carrying interruptions in each separate algE gene, and a strain containing algE5 only. Studies of these mutants indicated that single algE gene inactivations, with the exception of algE3 , did not affect the fractional G content much. However, for all strains tested the alginate composition varied somewhat as a response to the growth conditions.     

Properties and action pattern of the recombinant mannuronan C-5-epimerase AlgE2

The mannuronan C-5-epimerase AlgE2 is one of a family of Ca²⁺-dependent epimerases secreted by Azotobacter vinelandii. These enzymes catalyze the conversion of β- -mannuronic acid residues (M) to - -guluronic acid residues (G) in alginate. AlgE2 has been produced by fermentation with a recombinant strain of Escherichia coli, isolated and partially purified. Epimerization with AlgE2 increased the content of G-residues in different alginates from starting values of 0–45% up to approximately 70%. The new G-residues were mainly present in short blocks. Although G-residues may be introduced next to pre-existing G-residues, AlgE2 was not able to epimerize strictly alternating MG-structures. The epimerization with AlgE2 was greatly affected by the concentration of Ca²⁺. The type of alginate used as substrate affected the reaction rate and the reaction pattern especially at low Ca²⁺ concentration. AlgE2 appears to act by a preferred attack mechanism where the enzyme associates with different sequences in the alginate depending on the concentration of Ca²⁺. During epimerization, AlgE2 occasionally causes cleavage of the alginate chain. The observed frequency corresponds to 1–3 breaks per 1,000 M-units epimerized.     

Mannuronan C-5-epimerases and their application for in vitro and in vivo design of new alginates useful in biotechnology

The industrially important polysaccharide alginate is a linear copolymer of beta-D-mannuronic acid (M) and alpha-L-guluronic acid (G). It is produced commercially by extraction from brown seaweeds, although some of the bacteria belonging to the genera Azotobacter and Pseudomonas also synthesize alginates. Alginates are synthesized as mannuronan, and varying amounts of the M residues in the polymer are then epimerized to G residues by mannuronan C-5-epimerases. The gel-forming, water-binding, and immunogenic properties of the polymer are dependent on the relative amount and sequence distribution of M and G residues. A family of seven calcium-dependent, secreted epimerases (AlgE1-7) from Azotobacter vinelandii have now been characterized, and in this paper the properties of all these enzymes are described. AlgE4 introduces alternating M and G residues into its substrate, while the remaining six enzymes introduce a mixture of continuous stretches of G residues and alternating sequences. Two of the enzymes, AlgE1 and AlgE3, are composed of two catalytically active domains, each introducing different G residue sequence patterns in alginate. These results indicate that the enzymes can be used for production of alginates with specialized properties.     

The catalytic activities of the bifunctional Azotobacter vinelandii mannuronan C-5-epimerase and alginate lyase AlgE7 probably originate from the same active site in the enzyme

The Azotobacter vinelandii genome encodes a family of seven secreted Ca(2+)-dependent epimerases (AlgE1--7) catalyzing the polymer level epimerization of beta-D-mannuronic acid (M) to alpha-L-guluronic acid (G) in the commercially important polysaccharide alginate. AlgE1--7 are composed of two types of protein modules, A and R, and the A-modules have previously been found to be sufficient for epimerization. AlgE7 is both an epimerase and an alginase, and here we show that the lyase activity is Ca(2+)-dependent and also responds similarly to the epimerases in the presence of other divalent cations. The AlgE7 lyase degraded M-rich alginates and a relatively G-rich alginate from the brown algae Macrocystis pyrifera most effectively, producing oligomers of 4 (mannuronan) to 7 units. The sequences cleaved were mainly G/MM and/or G/GM. Since G-moieties dominated at the reducing ends even when mannuronan was used as substrate, the AlgE7 epimerase probably stimulates the lyase pathway, indicating a complex interplay between the two activities. A truncated form of AlgE1 (AlgE1-1) was converted to a combined epimerase and lyase by replacing the 5'-798 base pairs in the algE1-1 gene with the corresponding A-module-encoding DNA sequence from algE7. Furthermore, substitution of an aspartic acid residue at position 152 with glycine in AlgE7A eliminated almost all of both the lyase and epimerase activities. Epimerization and lyase activity are believed to be mechanistically related, and the results reported here strongly support this hypothesis by suggesting that the same enzymatic site can catalyze both reactions.     

NMR structure of the R-module: a parallel beta-roll subunit from an Azotobacter vinelandii mannuronan C-5 epimerase

In the bacterium Azotobacter vinelandii, a family of seven secreted and calcium-dependent mannuronan C-5 epimerases (AlgE1-7) has been identified. These epimerases are responsible for the epimerization of beta-d-mannuronic acid to alpha-l-guluronic acid in alginate polymers. The epimerases consist of two types of structural modules, designated A (one or two copies) and R (one to seven copies). The structure of the catalytically active A-module from the smallest epimerase AlgE4 (consisting of AR) has been solved recently. This paper describes the NMR structure of the R-module from AlgE4 and its titration with a substrate analogue and paramagnetic thulium ions. The R-module folds into a right-handed parallel beta-roll. The overall shape of the R-module is an elongated molecule with a positively charged patch that interacts with the substrate. Titration of the R-module with thulium indicated possible calcium binding sites in the loops formed by the nonarepeat sequences in the N-terminal part of the molecule and the importance of calcium binding for the stability of the R-module. Structure calculations showed that calcium ions can be incorporated in these loops without structural violations and changes. Based on the structure and the electrostatic surface potential of both the A- and R-module from AlgE4, a model for the appearance of the whole protein is proposed.     

Mannuronan C-5 epimerases and cellular differentiation of Azotobacter vinelandii

Differentiation in Azotobacter vinelandii involves the encystment of the vegetative cell under adverse environmental circumstances and the germination of the resting cell into the vegetative state when growth conditions are satisfactory again. Morphologically, the encystment process involves the development of a protective coat around the resting cell. This coat partly consists of multiple layers of alginate, which is a co-polymer of β- d -mannuronic acid (M) and α- l -guluronic acid (G). Alginate contributes to coat rigidity by virtue of a high content of GG blocks. Such block structures are generated through a family of mannuronan C-5 epimerases that convert M to G after polymerization. Results from immunodetection and light microscopy, using stains that distinguish between different cyst components and types, indicate a correlation between cyst coat organization and the amount and appearance of mannuronan C-5 epimerases in the extracellular medium and attached to the cells. Specific roles of individual members of the epimerase family are indicated. Calcium and magnesium ions appear to have different roles in the structural organization of the cyst coat. Also reported is a new gene sharing strong sequence homology with parts of the epimerase-encoded R-modules. This gene is located within the epimerase gene cluster of Azotobacter vinelandii .     

Mode of action of recombinant Azotobacter vinelandii mannuronan C-5 epimerases AlgE2 and AlgE4.

The enzymes mannuronan C-5 epimerases catalyze conversion of beta-D-mannuronic acid to alpha-L-guluronic acid in alginates at the polymer level and thereby introduce sequences that have functional properties relevant to gelation. The enzymatic conversion by recombinant mannuronan C-5 epimerases AlgE4 and AlgE2 on alginate type substrates with different degree of polymerization and initial low fraction of alpha-L-guluronic acid was investigated. Essentially no enzymatic activity was found for fractionated mannuronan oligomer substrates with an average degree of polymerization, DP(n), less than or equal 6, whereas increasing the DP(n) yielded increased epimerization activity. This indicates that these enzymes have an active site consisting of binding domains for consecutive residues that requires interaction with 7 or more consecutive residues to show enzymatic activity. The experimentally determined kinetics of the reaction, and the residue sequence arrangement introduced by the epimerization, were modeled using Monte Carlo simulation accounting for the various competing intrachain substrates and assuming either a processive mode of action or preferred attack. The comparison between experimental data and simulation results suggests that epimerization by AlgE4 is best described by a processive mode of action, whereas the mode of action of AlgE2 appears to be more difficult to determine.     

Mode of action and subsite studies of the guluronan block-forming mannuronan C-5 epimerases AlgE1 and AlgE6

AlgE1, AlgE5 and AlgE6 are members of a family of mannuronan C-5 epimerases encoded by the bacterium Azotobacter vinelandii, and are active in the biosynthesis of alginate, where they catalyse the post-polymerization conversion of beta-D-mannuronic acid (M) residues into alpha-L-guluronic acid residues (G). All enzymes show preference for introducing G-residues neighbouring a pre-existing G. They also have the capacity to convert single M residues flanked by G, thus 'condensing' G-blocks to form almost homopolymeric guluronan. Analysis of the length and distribution of G-blocks based on specific enzyme degradation combined with size-exclusion chromatography, electrospray ionization MS, HPAEC-PAD (high-performance anion-exchange chromatography and pulsed amperometric detection), MALDI (matrix-assisted laser-desorption ionization)-MS and NMR revealed large differences in block length and distribution generated by AlgE1 and AlgE6, probably reflecting their different degree of processivity. When acting on polyMG as substrates, AlgE1 initially forms only long homopolymeric G-blocks >50, while AlgE6 gives shorter blocks with a broader block size distribution. Analyses of the AlgE1 and AlgE6 subsite specificities by the same methodology showed that a mannuronan octamer and heptamer respectively were the minimum substrate chain lengths needed to accommodate enzyme activities. The fourth M residue from the non-reducing end is epimerized first by both enzymes. When acting on MG-oligomers, AlgE1 needed a decamer while AlgE6 an octamer to accommodate activity. By performing FIA (flow injection analysis)-MS on the lyase digests of epimerized and standard MG-oligomers, the M residue in position 5 from the non-reducing end was preferentially attacked by both enzymes, creating an MGMGGG-sequence (underlined and boldface indicate the epimerized residue).     

Influence of environmental conditions on the activity of the recombinant mannuronan C-5-epimerase AlgE2

The mannuronan C-5-epimerase AlgE2 is one of a family of Ca(2+)-dependent epimerases secreted by Azotobacter vinelandii. These enzymes catalyze the conversion of beta-D-mannuronic acid residues (M) to alpha-L-guluronic acid residues (G) in alginate. AlgE2 had a pH optimum between 6.5 and 7 and a temperature optimum around 55 degrees C. Addition of low molecular weight organic compounds, including buffers, amino acids and osmoprotective compounds, affected the activity of the enzyme. The charge, size and stereochemistry of the added compounds were important. The activity of AlgE2, dissolved in various buffers (same pH), decreased with increasing fraction of positively charged buffer ions. Mono- and divalent metal ions also influenced the activity. When Ca(2+) was omitted only Sr(2+), of the metal ions tested, supported some activity of AlgE2. At high concentration of Ca(2+) (3.3 mM) these ions had a negative effect on the activity, whereas at low Ca(2+) concentration (0.58 mM) the activity was enhanced by addition of Sr(2+), and to some degree also by addition of Mg(2+) and Mn(2+). During epimerization AlgE2 occasionally causes cleavage of the alginate chain. These chain breaks could not be prevented by changes in the conditions during the epimerization. The composition and sequential structure of epimerized alginate was not altered by changes in the epimerization conditions.     

Structural and Functional Characterization of the R-modules in Alginate C-5 Epimerases AlgE4 and AlgE6 from Azotobacter vinelandii

The bacterium Azotobacter vinelandii produces a family of seven secreted and calcium-dependent mannuronan C-5 epimerases (AlgE1–7). These epimerases are responsible for the epimerization of β-d-mannuronic acid (M) to α-l-guluronic acid (G) in alginate polymers. The epimerases display a modular structure composed of one or two catalytic A-modules and from one to seven R-modules having an activating effect on the A-module. In this study, we have determined the NMR structure of the three individual R-modules from AlgE6 (AR1R2R3) and the overall structure of both AlgE4 (AR) and AlgE6 using small angle x-ray scattering. Furthermore, the alginate binding ability of the R-modules of AlgE4 and AlgE6 has been studied with NMR and isothermal titration calorimetry. The AlgE6 R-modules fold into an elongated parallel β-roll with a shallow, positively charged groove across the module. Small angle x-ray scattering analyses of AlgE4 and AlgE6 show an overall elongated shape with some degree of flexibility between the modules for both enzymes. Titration of the R-modules with defined alginate oligomers shows strong interaction between AlgE4R and both oligo-M and MG, whereas no interaction was detected between these oligomers and the individual R-modules from AlgE6. A combination of all three R-modules from AlgE6 shows weak interaction with long M-oligomers. Exchanging the R-modules between AlgE4 and AlgE6 resulted in a novel epimerase called AlgE64 with increased G-block forming ability compared with AlgE6.     

Structural and mutational characterization of the catalytic A-module of the mannuronan C-5-epimerase AlgE4 from Azotobacter vinelandii

Alginate is a family of linear copolymers of (1-->4)-linked beta-d-mannuronic acid and its C-5 epimer alpha-l-guluronic acid. The polymer is first produced as polymannuronic acid and the guluronic acid residues are then introduced at the polymer level by mannuronan C-5-epimerases. The structure of the catalytic A-module of the Azotobacter vinelandii mannuronan C-5-epimerase AlgE4 has been determined by x-ray crystallography at 2.1-A resolution. AlgE4A folds into a right-handed parallel beta-helix structure originally found in pectate lyase C and subsequently in several polysaccharide lyases and hydrolases. The beta-helix is composed of four parallel beta-sheets, comprising 12 complete turns, and has an amphipathic alpha-helix near the N terminus. The catalytic site is positioned in a positively charged cleft formed by loops extending from the surface encompassing Asp(152), an amino acid previously shown to be important for the reaction. Site-directed mutagenesis further implicates Tyr(149), His(154), and Asp(178) as being essential for activity. Tyr(149) probably acts as the proton acceptor, whereas His(154) is the proton donor in the epimerization reaction.     

Cloning and expression of an Azotobacter vinelandii mannuronan C-5-epimerase gene.

An Azotobacter vinelandii mannuronan C-5-epimerase gene was cloned in Escherichia coli. This enzyme catalyzes the Ca(2+)-dependent epimerization of D-mannuronic acid residues in alginate to the corresponding epimer L-guluronic acid. The epimerase gene was identified by screening a bacteriophage EMBL3 gene library of A. vinelandii DNA with a synthetic oligonucleotide probe. The sequence of this probe was deduced after determination of the N-terminal amino acid sequence of a previously reported extracellular mannuronan C-5-epimerase from A. vinelandii. A DNA fragment hybridizing against the probe was subcloned in a plasmid vector in E. coli, and the corresponding recombinant plasmid expressed intracellular mannuronan C-5-epimerase in this host. The nucleotide sequence of the gene encoding the epimerase was determined, and the sequence data showed that the molecular mass of the deduced protein is 103 kDa. A module consisting of about 150 amino acids was repeated tandemly four times in the C-terminal part of the deduced protein. Each of the four repeats contained four to six tandemly oriented nonameric repeats. The sequences in these motifs are similar to the Ca(2+)-binding domains of functionally unrelated secreted proteins reported previously in other bacteria. The reaction product of the recombinant epimerase was analyzed by nuclear magnetic resonance spectroscopy, and the results showed that the guluronic acid residues were distributed in blocks along the polysaccharide chain. Such a nonrandom distribution pattern, which is important for the commercial use of alginate, has previously also been identified in the reaction product of the corresponding enzyme isolated from A. vinelandii.     

Single-molecular pair unbinding studies of Mannuronan C-5 epimerase AlgE4 and its polymer substrate

Alginate biosynthesis involves C-5-mannuronan epimerases catalyzing the conversion of beta-D-mannuronic acid to alpha-L-guluronic acid at the polymer level. Mannuronan epimerases are modular enzymes where the various modules yield specific sequential patterns of the converted residues in their polymer products. Here, the interaction between the AlgE4 epimerase and mannuronan is determined by dynamic force spectroscopy. The specific unbinding between molecular pairs of mannuronan and AlgE4 as well as its two modules, A and R, respectively, was studied as a function of force loading rate. The mean protein-mannuronan unbinding forces were determined to be in the range 73-144 pN, depending on the protein, at a loading rate of 0.6 nN/s, and increased with increasing loading rate. The position of the activation barrier was determined to be 0.23 +/- 0.04 nm for the AlgE4 and 0.10 +/- 0.02 nm for its A-module. The lack of interaction observed between the R-module and mannuronan suggest that the A-module contains the binding site for the polymer substrate. The ratio between the epimerase-mannuronan dissociation rate and the catalytic rate for epimerization of single hexose residues suggests a processive mode of action of the AlgE4 epimerase yielding the observed sequence pattern in the uronan associated with the A-module of this enzyme.     

Characterization of Three New Azotobacter vinelandii Alginate Lyases,One of Which Is Involved in Cyst Germination

Alginates are polysaccharides composed of 1-4-linked β-d-mannuronic acid and α-l-guluronic acid. The polymer can be degraded by alginate lyases, which cleave the polysaccharide using a β-elimination reaction. Two such lyases have previously been identified in the soil bacterium Azotobacter vinelandii, as follows: the periplasmic AlgL and the secreted bifunctional mannuronan C-5 epimerase and alginate lyase AlgE7. In this work, we describe the properties of three new lyases from this bacterium, AlyA1, AlyA2, and AlyA3, all of which belong to the PL7 family of polysaccharide lyases. One of the enzymes, AlyA3, also contains a C-terminal module similar to those of proteins secreted by a type I secretion system, and its activity is stimulated by Ca²⁺. All three enzymes preferably cleave the bond between guluronic acid and mannuronic acid, resulting in a guluronic acid residue at the new reducing end, but AlyA3 also degrades the other three possible bonds in alginate. Strains containing interrupted versions of alyA1, alyA3, and algE7 were constructed, and their phenotypes were analyzed. Genetically pure alyA2 mutants were not obtained, suggesting that this gene product may be important for the bacterium during vegetative growth. After centrifugation, cultures from the algE7 mutants form a large pellet containing alginate, indicating that AlgE7 is involved in the release of alginate from the cells. Upon encountering adverse growth conditions, A. vinelandii will form a resting stage called cyst. Alginate is a necessary part of the protective cyst coat, and we show here that strains lacking alyA3 germinate poorly compared to wild-type cells.Azotobacter vinelandii is a nitrogen-fixing bacterium found in soil. A. vinelandii and several species belonging to the related genus Pseudomonas have been found to produce the polymer alginate. This linear, extracellular polysaccharide is composed of 1-4-linked β-d-mannuronic acid (M) and its C-5 epimer α-l-guluronic acid (G) (35), and the relative amount and distribution of these two residues vary according to the species and growth conditions. Some of the M residues in bacterial alginates may be O acetylated at C-2, C-3, or both C-2 and C-3 (34).Alginate is first synthesized as mannuronan, and the G residues are introduced by mannuronan C-5 epimerases. All genome-sequenced alginate-producing bacteria have been found to encode a periplasmic epimerase, AlgG, that epimerizes some of the M residues in the polymer into G residues (40). AlgG seems to be unable to epimerize an M residue next to a preexisting G residue in vivo. A. vinelandii also encodes a family of secreted mannuronan C-5 epimerases (AlgE1-7) (40), some of which are able to form stretches of consecutive G residues (G blocks). Alginates containing G blocks can be cross-linked by divalent cations and thereby form gels (35).Polysaccharide lyases (EC 4.2.2.-) are a group of enzymes which cleave the polymer chains via a β-elimination mechanism, resulting in the formation of a double bond at the newly formed nonreducing end. For alginate lyases, 4-deoxy-l-erythro-hex-4-enepyranosyluronate (denoted as Δ) is formed at the nonreducing end. Several such lyases have been purified from both alginate-producing and alginate-degrading organisms, as reviewed by Wong et al. (42). When they are classified according to primary structure, the alginate lyases belong to the polysaccharide-degrading enzyme families PL5, PL6, PL7, PL14, PL17, and PL18 (http://www.cazy.org). Alginate molecules may contain four different bonds (M-M, M-G, G-M, and G-G), and alginate lyases may therefore be classified according to their preferred substrate specificities. It is now possible to obtain pure mannuronan and nearly pure (MG)_n and G blocks (17, 19, 20), and this allows for an improved assessment of the substrate specificities of the alginate lyases.The following two alginate lyases have been characterized in A. vinelandii: the periplasmic AlgL that belongs to the PL5 family (15) and the extracellular bifunctional mannuronan C-5 epimerase and alginate lyase AlgE7 (36, 37). AlgL is encoded by the alginate biosynthesis operon, similar to what has been found in all characterized alginate-producing bacteria. This enzyme cleaves M-M and M-G bonds (15), while AlgE7 preferably degrades G-MM and G-GM bonds (37). The latter enzyme is also able to introduce G residues in the alginate, thus creating the preferred substrate for the lyase.When A. vinelandii experiences a lack of nutrients, it will develop into a dormant cell designated cyst (30). The cell is then protected against desiccation by a multilayered coat, of which gel-forming alginate is a necessary part. Resuspension of cysts in a medium containing glucose leads to a germination process in which vegetative cells eventually escape from the cyst coat. It has been proposed that an alginate lyase may be involved in the rupture of the coat (43). AlgL is dispensable for germination (38), while the biological function of AlgE7 is unknown. In this report, we use the available draft genome sequence of A. vinelandii to identify three additional putative lyases and evaluate their and AlgE7''s role in growth, encystment, and germination of the bacterium.     

Mapping enzymatic functionalities of mannuronan C-5 epimerases and their modular units by dynamic force spectroscopy

Alginates are (1→4)-linked structural copolyuronans consisting of β-d-mannuronic acid (M) and its C-5 epimer -l-guluronic acid (G). The residue sequence variation is introduced in a unique postpolymerisation step catalysed by a family of C-5 epimerases named AlgE enzymes. The seven known AlgE’s are composed of two modules, designated A and R, present in different number. The molecular details of the structure–function relationship of these seven epimerases, introducing specific residue sequences, are not understood. In this study, single-molecular pair interactions between alginate and AlgE enzymes were investigated using dynamic force spectroscopy. The AlgE enzymes AlgE4 and AlgE6, the recombinant construct PKA1 composed of A- and R-modules from various AlgE’s, as well as separate R- and A-modules were studied. The strength of the protein–mannuronan interaction, when applying a loading rate of 0.6 nN/s, varied from 73 pN (AlgE4) to 144 pN (A-module). The determined potential width, that is, the distance from the activation barrier to the bound substrate molecule, was 0.23 nm for AlgE4, 0.19 nm for AlgE6 and 0.1 nm for the A-module. No attraction was observed between the R-module and the substrate. The observations indicate that the A-module contains the substrate binding site and that the R-module modulates the enzyme–substrate binding strength. The observed AlgE4-polymer residence times, two orders of magnitude longer than expected from k_cat reported for AlgE4, not observed for PKA1, led us to propose a processive mode of action of AlgE4.     

Acid gel formation in (pseudo) alginates with and without G blocks produced by epimerising mannuronan with C5 epimerases

The main scope of this paper is the characterization, in terms of viscoelastic and mechanical properties, of acid gels formed from solutions of mannuronan ALG (0%G/0%GG) and its enzymatically epimerised products. The epimerised products were obtained using recombinantly produced mannuronan C5 epimerases named AlgE1 and AlgE4, which catalyse the conversion of mannuronic residues into guluronic (G) and guluronic–mannuronic (GM) blocks, respectively. The products used in this study resulted from either the action of AlgE1 on mannuronan for 5 and 24 h (named ALG(44%G/32%GG) and ALG (68%G/59%GG), respectively) or AlgE4 on mannuronan (named ALG (47%G/0%GG)). d-gluconic acid-δ-lactone (GDL) was used as H⁺-donor to produce acidic gels. ALG (0%G/0%GG) yields strong, stable solid-like structures. As predicted by circular dichroism measurements performed at different pH, gelation of ALG (47%G/0%GG) occurs at lower values of pH (1) than those obtainable using GDL. Hydrochloric acid was therefore added to ALG (47%G/0%GG) solutions yielding rapid sol–gel transitions and gels with a remarkable resistance to thermal treatment.

The introduction of guluronic residues along the chain (ALG (44%G/32%GG)) causes a reduction in the storage modulus at the equilibrium with respect to that of ALG (0%G/0%GG) and the occurrence of negligible syneresis at the highest polymer concentrations. The increase in the average length of the G blocks (ALG (68%G/59%GG)) is accompanied by a further increase in the storage modulus without the occurrence of any significant syneresis.     

The Pseudomonas syringae genome encodes a combined mannuronan C-5-epimerase and O-acetylhydrolase, which strongly enhances the predicted gel-forming properties of alginates

Alginates are industrially important, linear copolymers of beta-d-mannuronic acid (M) and its C-5-epimer alpha-l-guluronic acid (G). The G residues originate from a postpolymerization reaction catalyzed by mannuronan C-5-epimerases (MEs), leading to extensive variability in M/G ratios and distribution patterns. Alginates containing long continuous stretches of G residues (G blocks) can form strong gels, a polymer type not found in alginate-producing bacteria belonging to the genus Pseudomonas. Here we show that the Pseudomonas syringae genome encodes a Ca(2+)-dependent ME (PsmE) that efficiently forms such G blocks in vitro. The deduced PsmE protein consists of 1610 amino acids and is a modular enzyme related to the previously characterized family of Azotobacter vinelandii ME (AlgE1-7). A- and R-like modules with sequence similarity to those in the AlgE enzymes are found in PsmE, and the A module of PsmE (PsmEA) was found to be sufficient for epimerization. Interestingly, an R module from AlgE4 stimulated Ps-mEA activity. PsmE contains two regions designated M and RTX, both presumably involved in the binding of Ca(2+). Bacterial alginates are partly acetylated, and such modified residues cannot be epimerized. Based on a detailed computer-assisted analysis and experimental studies another PsmE region, designated N, was found to encode an acetylhydrolase. By the combined action of N and A PsmE was capable of redesigning an extensively acetylated alginate low in G from a non gel-forming to a gel-forming state. Such a property has to our knowledge not been previously reported for an enzyme acting on a polysaccharide.