Maintenance and Expansion: Modeling Material Stocks and Flows for Residential Buildings and Transportation Networks in the EU25

Material stocks are an important part of the social metabolism. Owing to long service lifetimes of stocks, they not only shape resource flows during construction, but also during use, maintenance, and at the end of their useful lifetime. This makes them an important topic for sustainable development. In this work, a model of stocks and flows for nonmetallic minerals in residential buildings, roads, and railways in the EU25, from 2004 to 2009 is presented. The changing material composition of the stock is modeled using a typology of 72 residential buildings, four road and two railway types, throughout the EU25. This allows for estimating the amounts of materials in in‐use stocks of residential buildings and transportation networks, as well as input and output flows. We compare the magnitude of material demands for expansion versus those for maintenance of existing stock. Then, recycling potentials are quantitatively explored by comparing the magnitude of estimated input, waste, and recycling flows from 2004 to 2009 and in a business‐as‐usual scenario for 2020. Thereby, we assess the potential impacts of the European Waste Framework Directive, which strives for a significant increase in recycling. We find that in the EU25, consisting of highly industrialized countries, a large share of material inputs are directed at maintaining existing stocks. Proper management of existing transportation networks and residential buildings is therefore crucial for the future size of flows of nonmetallic minerals.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.     

Evaluation of Modeling Approaches to Determine End‐of‐Life Flows Associated with Buildings: A Viennese Case Study on Wood and Contaminants

Dynamic material flow analysis enables the forecasting of secondary raw material potential for waste volumes in future periods, by assessing past, present, and future stocks and flows of materials in the anthroposphere. Analyses of waste streams of buildings stocks are uncertain with respect to data and model structure. Wood construction in Viennese buildings serve as a case study to compare different modeling approaches for determining end‐of‐life (EoL) wood and corresponding contaminant flows (lead, chlorine, and polycyclic aromatic hydrocarbons). A delayed input and a leaching stock modeling approach are used to determine wood stocks and flows from 1950 until 2100. Cross‐checking with independent estimates and sensitivity analyses are used to evaluate the results’ plausibility. In the situation of the given data in the present case study, the delay approach is a better choice for historical observations of EoL wood and for analyses at a substance level. It has some major drawbacks for future predictions at the goods level, though, as the durability of a large number of historical buildings with considerably higher wood content is not reflected in the model. The wood content parameter differs strongly for the building periods and has therefore the highest influence on the results. Based on this knowledge, general recommendations can be derived for analyses on waste flows of buildings at a goods and substance level.     

The Multilevel Cycle of Anthropogenic Zinc

A comprehensive annual cycle for stocks and flows of zinc, based on data from circa 1994 and incorporating information on extraction, processing, fabrication, use, discard, recycling, and landfilling, was carried out at three discrete governmental unit levels—54 countries and 1 country group (which together comprise essentially all global anthropogenic zinc stocks and flows), nine world regions, and the planet as a whole. All of these cycles are available in an electronic supplement to this article, which thus provides a metadata set on zinc flows for the use of industrial ecology researchers. A "best estimate" global zinc cycle was constructed to resolve aggregation discrepancies. Among the most interesting results are the following: (1) The accumulation ratio, that is, addition to in-use stock as a function of zinc entering use, is positive and large (2/3 of zinc entering use is added to stock) (country, regional, and global levels); (2) secondary input ratios (fractions of input to fabrication that are from recycled zinc) and domestic recycling percentages (fractions of discarded zinc that are recycled) differ among regions by as much as a factor of six (regional level); (3) worldwide, about 40% of the zinc that was discarded in various forms was recovered and reused or recycled (global level); (4) zinc cycles can usefully be characterized by a set of ratios, including, notably, the utilization efficiency (the ratio of manufacturing waste to manufacturing output: 0.090) and the prompt scrap ratio (new scrap as a fraction of manufacturing input: 0.070) (global level). Because capturable discards are a significant fraction of primary zinc inputs, if a larger proportion of discards were recaptured, extraction requirements would decrease significantly (global level). The results provide a framework for complementary studies in resource stocks, industrial resource utilization, energy consumption, waste management, industrial economics, and environmental impacts.     

Effect of land‐use and land‐cover change on mangrove blue carbon: A systematic review

Mangroves shift from carbon sinks to sources when affected by anthropogenic land‐use and land‐cover change (LULCC). Yet, the magnitude and temporal scale of these impacts are largely unknown. We undertook a systematic review to examine the influence of LULCC on mangrove carbon stocks and soil greenhouse gas (GHG) effluxes. A search of 478 data points from the peer‐reviewed literature revealed a substantial reduction of biomass (82% ± 35%) and soil (54% ± 13%) carbon stocks due to LULCC. The relative loss depended on LULCC type, time since LULCC and geographical and climatic conditions of sites. We also observed that the loss of soil carbon stocks was linked to the decreased soil carbon content and increased soil bulk density over the first 100 cm depth. We found no significant effect of LULCC on soil GHG effluxes. Regeneration efforts (i.e. restoration, rehabilitation and afforestation) led to biomass recovery after ~40 years. However, we found no clear patterns of mangrove soil carbon stock re‐establishment following biomass recovery. Our findings suggest that regeneration may help restore carbon stocks back to pre‐disturbed levels over decadal to century time scales only, with a faster rate for biomass recovery than for soil carbon stocks. Therefore, improved mangrove ecosystem management by preventing further LULCC and promoting rehabilitation is fundamental for effective climate change mitigation policy.     

Material and Energy Flows and Environmental Impacts of the Internet in Switzerland

The Internet leads to material and energy consumption as well as various environmental impacts on both the regional and global scale. Yet, assessments of the Internet's energy consumption and resulting greenhouse gas emissions are still rare, and assessments of material flows and further environmental impacts are virtually non‐existent. This article investigates material flows, the direct energy consumption during the use phase, as well as environmental impacts linked to the service, “Internet in Switzerland.” In our model, the service, Internet in Switzerland, is divided into various Internet participant categories. All devices used to access or provide Internet services are merged in a limited number of equipment families and, as such, included in an inventory of the existing infrastructure (stock). Based on this inventory, a material flow analysis (MFA) is performed, which includes the current stock as well as flows resulting from growth and disposal. The direct energy consumption for the operation of the infrastructure is quantified. Environmental impacts are calculated with a life cycle assessment approach, using the ecoinvent database and the software, SimaPro, applying four different methods. The MFA results in a 2009 stock of 98,100 tonnes. Approximately 4,130 gigawatt hours per year, or 7% of the total Swiss electricity consumption, were used in 2009 to operate the Swiss infrastructure. The environmental impacts caused during the production and use phases vary significantly depending on the assessment method chosen. The disposal phase had mainly positive impacts as a result of material recovery.     

Life Cycle Assessment of Novel Aircraft Interior Panels Made from Renewable or Recyclable Polymers with Natural Fiber Reinforcements and Non‐Halogenated Flame Retardants

A comprehensive life cycle assessment of panels for aircraft interiors was conducted, including both a conventional glass fiber‐reinforced panel and different novel sustainable panels. The conventional panel is made of a glass fiber‐reinforced thermoset composite with halogenated flame retardant, whereas the sustainable panels are made of renewable or recyclable polymers, natural fiber reinforcements, and nonhalogenated flame retardants. Four different sustainable panels were investigated: a geopolymer‐based panel; a linseed‐oil–based biopolymer panel; and two thermoplastic panels, one with polypropylene (PP) and another with polylactic acid (PLA). All of the sustainable panels were developed to fulfil fire resistance requirements and to be lighter than the conventional panels in order to reduce fuel consumption and air pollutant emissions from the aircraft. The environmental impacts associated with energy consumption and air emissions were assessed, as well as other environmental impacts resulting from the extraction and processing of materials, transportation of materials and waste, panel manufacturing, use, maintenance, and end of life (EoL). All the sustainable panels showed better environmental performance than the conventional panel. The overall impacts of the sustainable panels were offset by the environmental benefits in the use stage attributed to weight reduction. One square meter of the novel panels could save to 6,000 kilograms of carbon dioxide equivalents. The break‐even point (in months) at which the use of sustainable panels would yield an environmental benefit relative to the impacts arising in production and EoL was as follows: 1.2 for the geopolymer panel; 1.7 for the biopolymer panel; 10.4 for the PLA panel; and 54.5 for the PP panel.     

Traditional shifting agriculture: tracking forest carbon stock and biodiversity through time in western Panama

Reducing emissions from deforestation and forest degradation (REDD+) requires developing countries to quantify greenhouse gas emissions and removals from forests in a manner that is robust, transparent, and as accurate as possible. Although shifting cultivation is a dominant practice in several developing countries, there is still very limited information available on how to monitor this land‐use practice for REDD+ as little is known about the areas of shifting cultivation or the net carbon balance. In this study, we propose and test a methodology to monitor the effect of the shifting cultivation on above‐ground carbon stocks. We combine multiyear remote sensing information, taken from a 12‐year period, with an in‐depth community forest carbon stock inventory in Palo Seco Forest Reserve, western Panama. Using remote sensing, we were able to separate four forest classes expressing different forest‐use intensity and time‐since‐intervention, which demonstrate expected trends in above‐ground carbon stocks. The addition of different interventions observed over time is shown to be a good predictor, with remote sensing variables explaining 64.2% of the variation in forest carbon stocks in cultivated landscapes. Multitemporal and multispectral medium‐resolution satellite imagery is shown to be adequate for tracking land‐use dynamics of the agriculture‐fallow cycle. The results also indicate that, over time, shifting cultivation has a transitory effect on forest carbon stocks in the study area. This is due to the rapid recovery of forest carbon stocks, which results in limited net emissions. Finally, community participation yielded important additional benefits to measuring carbon stocks, including transparency and the valorization of local knowledge for biodiversity monitoring. Our study provides important inputs regarding shifting cultivation, which should be taken into consideration when national forest monitoring systems are created, given the context of REDD+ safeguards.     

Recycle,Bury, or Burn Wood Waste Biomass?: LCA Answer Depends on Carbon Accounting,Emissions Controls,Displaced Fuels,and Impact Costs

This study extends existing life cycle assessment (LCA) literature by assessing seven environmental burdens and an overall monetized environmental score for eight recycle, bury, or burn options to manage clean wood wastes generated at construction and demolition activity sites. The study assesses direct environmental impacts along with substitution effects from displacing fossil fuels and managed forest wood sourcing activities. Follow‐on effects on forest carbon stocks, land use, and fuel markets are not assessed. Sensitivity analysis addresses landfill carbon storage and biodegradation rates, atmospheric emissions controls, displaced fuel types, and two alternative carbon accounting methods commonly used for waste management LCAs. Base‐case carbon accounting considers emissions and uptakes of all biogenic and fossil carbon compounds, including biogenic carbon dioxide. Base‐case results show that recycling options (recycling into reconstituted wood products or into wood pulp for papermaking) rank better than all burning or burying options for overall monetized score as well as for climate impacts, except that wood substitution for coal in industrial boilers is slightly better than recycling for the climate. Wood substitution for natural gas boiler fuel has the highest environmental impacts. Sensitivity analysis shows the overall monetized score rankings for recycling options to be robust except for the carbon accounting method, for which all options are highly sensitive. Under one of the alternative methods, wood substitution for coal boiler fuel and landfill options with high methane capture efficiency are the best for the overall score; recycling options are next to the worst. Under the other accounting alternative, wood substitution for coal and waste‐to‐energy are the best, followed by recycling options.     

Global Life Cycle Paper Flows,Recycling Metrics,and Material Efficiency

Despite major improvements in recycling over the last decades, the pulp and paper sector is a significant contributor to global greenhouse gas emissions and other environmental pressures. Further reduction of virgin material requirements and environmental impacts requires a detailed understanding of the global material flows in paper production and consumption. This study constructs a Sankey diagram of global material flows in the paper life cycle, from primary inputs to end‐of‐life waste treatment, based on a review of publicly available data. It then analyzes potential improvements in material flows and discusses recycling and material efficiency metrics. The article argues that the use of the collection rate as a recycling metric does not directly stimulate avoidance of virgin inputs and associated impacts. An alternative metric compares paper for recycling (recovered paper) with total fibrous inputs and indicates that the current rate is at just over half of the technical potential. Material efficiency metrics are found to be more useful if they relate to the reuse potential of wastes. The material balance developed in this research provides a solid basis for further study of global sustainable production and consumption of paper. The conclusions on recycling and efficiency should be considered for improving environmental assessment and stimulating a shift toward resource efficiency and the circular economy.     

Accounting for carbon flows into and from (bio)plastic in a national climate inventory

Despite the time-dependent behavior of carbon stored in plastic materials, literature assessing carbon flows into and from plastic typically applies a static approach. To better understand the climate impacts of such storage, this study explores how carbon stored in plastics can contribute over time to the national climate inventory with various emphasis on recycling. This is accomplished by implementing material stock change estimations for carbon in plastic materials that follow first-order decay and include impacts from recycling rates in the Integrated MARKAL-EFOM System model generator for Sweden (TIMES-Sweden). Thereafter, three approaches to how carbon released from the plastic material stock is accounted for in the national climate inventory were applied to determine how each approach affects resulting emission and net-zero pathways in different recycling rate scenarios. An accounting approach that follows the first-order decay pattern of material stocks was found to be important for capturing the impacts of recycling and for neither over- nor underestimating the emission impact from carbon stored in plastics. Accounting for carbon stored in plastics may provide important incentives for producing renewable plastics and reducing dependence on carbon removal technologies. Because of its synergies with recycling, the carbon storage potential of plastic products is well worth recognizing and promoting in a policy setting that aims for circularity. For Sweden, this reduces the need for bioenergy carbon capture and storage and makes more biomass-based carbon and electricity available for use elsewhere in the energy system.     

Measuring Progress towards a Circular Economy: A Monitoring Framework for Economy‐wide Material Loop Closing in the EU28

The concept of a circular economy (CE) is gaining increasing attention from policy makers, industry, and academia. There is a rapidly evolving debate on definitions, limitations, the contribution to a wider sustainability agenda, and a need for indicators to assess the effectiveness of circular economy measures at larger scales. Herein, we present a framework for a comprehensive and economy‐wide biophysical assessment of a CE, utilizing and systematically linking official statistics on resource extraction and use and waste flows in a mass‐balanced approach. This framework builds on the widely applied framework of economy‐wide material flow accounting and expands it by integrating waste flows, recycling, and downcycled materials. We propose a comprehensive set of indicators that measure the scale and circularity of total material and waste flows and their socioeconomic and ecological loop closing. We applied this framework in the context of monitoring efforts for a CE in the European Union (EU28) for the year 2014. We found that 7.4 gigatons (Gt) of materials were processed in the EU and only 0.71 Gt of them were secondary materials. The derived input socioeconomic cycling rate of materials was therefore 9.6%. Further, of the 4.8 Gt of interim output flows, 14.8% were recycled or downcycled. Based on these findings and our first efforts in assessing sensitivity of the framework, a number of improvements are deemed necessary: improved reporting of wastes, explicit modeling of societal in‐use stocks, introduction of criteria for ecological cycling, and disaggregated mass‐based indicators to evaluate environmental impacts of different materials and circularity initiatives. This article met the requirements for a gold – gold JIE data openness badge described at http://jie.click/badges .     

Environmental change and the carbon balance of Amazonian forests

Extreme climatic events and land‐use change are known to influence strongly the current carbon cycle of Amazonia, and have the potential to cause significant global climate impacts. This review intends to evaluate the effects of both climate and anthropogenic perturbations on the carbon balance of the Brazilian Amazon and to understand how they interact with each other. By analysing the outputs of the Intergovernmental Panel for Climate Change (IPCC) Assessment Report 4 (AR4) model ensemble, we demonstrate that Amazonian temperatures and water stress are both likely to increase over the 21st Century. Curbing deforestation in the Brazilian Amazon by 62% in 2010 relative to the 1990s mean decreased the Brazilian Amazon's deforestation contribution to global land use carbon emissions from 17% in the 1990s and early 2000s to 9% by 2010. Carbon sources in Amazonia are likely to be dominated by climatic impacts allied with forest fires (48.3% relative contribution) during extreme droughts. The current net carbon sink (net biome productivity, NBP) of +0.16 (ranging from +0.11 to +0.21) Pg C year^?1 in the Brazilian Amazon, equivalent to 13.3% of global carbon emissions from land‐use change for 2008, can be negated or reversed during drought years [NBP = ?0.06 (?0.31 to +0.01) Pg C year^?1]. Therefore, reducing forest fires, in addition to reducing deforestation, would be an important measure for minimizing future emissions. Conversely, doubling the current area of secondary forests and avoiding additional removal of primary forests would help the Amazonian gross forest sink to offset approximately 42% of global land‐use change emissions. We conclude that a few strategic environmental policy measures are likely to strengthen the Amazonian net carbon sink with global implications. Moreover, these actions could increase the resilience of the net carbon sink to future increases in drought frequency.     

Dynamic Modeling of In‐Use Cement Stocks in the United States

A dynamic substance‐flow model is developed to characterize the stocks and flows of cement utilized during the 20th century in the United States, using the generic cement life cycle as a systems boundary. The motivation for estimating historical inventories of cement stocks and flows is to provide accurate estimates of contemporary cement in‐use stocks in U.S. infrastructure and future discards to relevant stakeholders in U.S. infrastructure, such as the federal and state highway administrators, departments of transportation, public and private utilities, and the construction and cement industries. Such information will assist in planning future rehabilitation projects and better life cycle management of infrastructure systems. In the present policy environment of climate negotiations, estimates of in‐use cement infrastructure can provide insights about to what extent built environment can act as a carbon sink over its lifetime. The rate of addition of new stock, its composition, and the repair of existing stock are key determinants of infrastructure sustainability. Based upon a probability of failure approach, a dynamic stock and flow model was developed utilizing three statistical lifetime distributions—Weibull, gamma, and lognormal—for each cement end‐use. The model‐derived estimate of the “in‐use” cement stocks in the United States is in the range of 4.2 to 4.4 billion metric tons (gigatonnes, Gt). This indicates that 82% to 87% of cement utilized during the last century is still in use. On a per capita basis, this is equivalent to 14.3 to 15.0 tonnes of in‐use cement stock per person. The in‐use cement stock per capita has doubled over the last 50 years, although the rate of growth has slowed.     

Unified Materials Information System (UMIS): An Integrated Material Stocks and Flows Data Structure

Modern society depends on the use of many diverse materials. Effectively managing these materials is becoming increasingly important and complex, from the analysis of supply chains, to quantifying their environmental impacts, to understanding future resource availability. Material stocks and flows data enable such analyses, but currently exist mainly as discrete packages, with highly varied type, scope, and structure. These factors constitute a powerful barrier to holistic integration and thus universal analysis of existing and yet to be published material stocks and flows data. We present the Unified Materials Information System (UMIS) to overcome this barrier by enabling material stocks and flows data to be comprehensively integrated across space, time, materials, and data type independent of their disaggregation, without loss of information, and avoiding double counting. UMIS can therefore be applied to structure diverse material stocks and flows data and their metadata across material systems analysis methods such as material flow analysis (MFA), input‐output analysis, and life cycle assessment. UMIS uniquely labels and visualizes processes and flows in UMIS diagrams; therefore, material stocks and flows data visualized in UMIS diagrams can be individually referenced in databases and computational models. Applications of UMIS to restructure existing material stocks and flows data represented by block flow diagrams, system dynamics diagrams, Sankey diagrams, matrices, and derived using the economy‐wide MFA classification system are presented to exemplify use. UMIS advances the capabilities with which complex quantitative material systems analysis, archiving, and computation of material stocks and flows data can be performed.     

Shrimp ponds lead to massive loss of soil carbon and greenhouse gas emissions in northeastern Brazilian mangroves

Mangroves of the semiarid Caatinga region of northeastern Brazil are being rapidly converted to shrimp pond aquaculture. To determine ecosystem carbon stocks and potential greenhouse gas emissions from this widespread land use, we measured carbon stocks of eight mangrove forests and three shrimp ponds in the Acaraú and Jaguaribe watersheds in Ceará state, Brazil. The shrimp ponds were paired with adjacent intact mangroves to ascertain carbon losses and potential emissions from land conversion. The mean total ecosystem carbon stock of mangroves in this semiarid tropical landscape was 413 ± 94 Mg C/ha. There were highly significant differences in the ecosystem carbon stocks between the two sampled estuaries suggesting caution when extrapolating carbon stock across different estuaries even in the same landscape. Conversion of mangroves to shrimp ponds resulted in losses of 58%–82% of the ecosystem carbon stocks. The mean potential emissions arising from mangrove conversion to shrimp ponds was 1,390 Mg CO₂e/ha. Carbon losses were largely from soils which accounted for 81% of the total emission. Losses from soils >100 cm in depth accounted for 33% of the total ecosystem carbon loss. Soil carbon losses from shrimp pond conversion are equivalent to about 182 years of soil carbon accumulation. Losses from mangrove conversion are about 10‐fold greater than emissions from conversion of upland tropical dry forest in the Brazilian Caatinga underscoring the potential value for their inclusion in climate change mitigation activities.     

Analyzing the Environmental Benefits of Industrial Symbiosis

Studies of industrial symbiosis (IS) focus on the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are shared or exchanged among the actors of the system, thereby reducing the consumption of virgin material and energy inputs, and likewise the generation of waste and emissions. In this study, the environmental impacts of an industrial ecosystem centered around a pulp and paper mill and operating as an IS are analyzed using life cycle assessment (LCA). The system is compared with two hypothetical reference systems in which the actors would operate in isolation. Moreover, the system is analyzed further in order to identify possibilities for additional links between the actors. The results show that of the total life cycle impacts of the system, upstream processes made the greatest overall contribution to the results. Comparison with stand‐alone production shows that in the case studied, the industrial symbiosis results in modest improvements, 5% to 20% in most impact categories, in the overall environmental impacts of the system. Most of the benefits occur upstream through heat and electricity production for the local town. All in all it is recommended that when the environmental impacts of industrial symbiosis are assessed, the impacts occurring upstream should also be studied, not only the impacts within the ecosystem.     

The Greenhouse Gas Footprint of China's Food System: An Analysis of Recent Trends and Future Scenarios

Food chain systems (FCSs), which begin in agricultural production and end in consumption and waste disposal, play a significant role in China's rising greenhouse gas (GHG) emissions. This article uses scenario analysis to show China's potential trajectories to a low‐carbon FCS. Between 1996 and 2010, the GHG footprint of China's FCSs increased from 1,308 to 1,618 megatonnes of carbon dioxide equivalent (Mt CO₂‐eq), although the emissions intensity of all food categories, except for aquatic food, recorded steep declines. We project three scenarios to 2050 based on historical trends and plausible shifts in policies and environmental conditions: reference scenario; technology improvement scenario; and low GHG emissions scenario. The reference scenario is based on existing trends and exhibits a large growth in GHG emissions, increasing from 1,585 Mt CO₂‐eq in 2010 to 2,505 Mt CO₂‐eq in 2050. In the technology improvement scenario, emissions growth is driven by rising food demand, but that growth will be counterbalanced by gains in agricultural technology, causing GHG emissions to fall to 1,413 Mt CO₂‐eq by 2050. Combining technology improvement with the shift to healthier dietary patterns, GHG emissions in the low GHG emissions scenario will decline to 946 Mt CO₂‐eq in 2050, a drop of 41.5% compared with the level in 2010. We argue that these are realistic projections and are indeed indicative of China's overall strategy for low‐carbon development. Improving agricultural technology and shifting to a more balanced diet could significantly reduce the GHG footprint of China's FCSs. Furthermore, the transition to a low‐carbon FCS has potential cobenefits for land sustainability and public health.     

Mangrove blue carbon stocks and dynamics are controlled by hydrogeomorphic settings and land‐use change

Globally, carbon‐rich mangrove forests are deforested and degraded due to land‐use and land‐cover change (LULCC). The impact of mangrove deforestation on carbon emissions has been reported on a global scale; however, uncertainty remains at subnational scales due to geographical variability and field data limitations. We present an assessment of blue carbon storage at five mangrove sites across West Papua Province, Indonesia, a region that supports 10% of the world's mangrove area. The sites are representative of contrasting hydrogeomorphic settings and also capture change over a 25‐years LULCC chronosequence. Field‐based assessments were conducted across 255 plots covering undisturbed and LULCC‐affected mangroves (0‐, 5‐, 10‐, 15‐ and 25‐year‐old post‐harvest or regenerating forests as well as 15‐year‐old aquaculture ponds). Undisturbed mangroves stored total ecosystem carbon stocks of 182–2,730 (mean ± SD: 1,087 ± 584) Mg C/ha, with the large variation driven by hydrogeomorphic settings. The highest carbon stocks were found in estuarine interior (EI) mangroves, followed by open coast interior, open coast fringe and EI forests. Forest harvesting did not significantly affect soil carbon stocks, despite an elevated dead wood density relative to undisturbed forests, but it did remove nearly all live biomass. Aquaculture conversion removed 60% of soil carbon stock and 85% of live biomass carbon stock, relative to reference sites. By contrast, mangroves left to regenerate for more than 25 years reached the same level of biomass carbon compared to undisturbed forests, with annual biomass accumulation rates of 3.6 ± 1.1 Mg C ha^?1 year^?1. This study shows that hydrogeomorphic setting controls natural dynamics of mangrove blue carbon stocks, while long‐term land‐use changes affect carbon loss and gain to a substantial degree. Therefore, current land‐based climate policies must incorporate landscape and land‐use characteristics, and their related carbon management consequences, for more effective emissions reduction targets and restoration outcomes.     

Substance Flow Analysis of Wastes Containing Polybrominated Diphenyl Ethers

The present article examines flows and stocks of Stockholm Convention regulated pollutants, commercial penta‐ and octabrominated diphenyl ether (cPentaBDE, cOctaBDE), on a city level. The goals are to (1) identify sources, pathways, and sinks of these compounds in the city of Vienna, (2) determine the fractions that reach final sinks, and (3) develop recommendations for waste management to ensure their minimum recycling and maximum transfer to appropriate final sinks. By means of substance flow analysis (SFA) and scenario analysis, it was found that the key flows of cPentaBDE stem from construction materials. Therefore, end‐of‐life (EOL) plastic materials used for construction must be separated and properly treated, for example, in a state‐of‐the‐art municipal solid waste (MSW) incinerator. In the case of cOctaBDE, the main flows are waste electrical and electronic equipment (WEEE) and, possibly, vehicles. Most EOL vehicles are exported from Vienna and pose a continental, rather than a local, problem. According to the modeling, approximately 73% of cOctaBDE reached the final sink MSW incinerator, and 17% returned back to consumption by recycling. Secondary plastics, made from WEEE, may thus contain significant amounts of cOctaBDE; however, uncertainties are high. According to uncertainty analysis, the major cause is the lack of reliable values regarding cOctaBDE concentrations in European WEEE categories 3 and 4, including cathode ray tube monitors for computers and televisions. We recommend establishing a new, goal‐oriented data set by additional analyses of waste constituents and plastic recycling samples, as well as establishing reliable mass balances of polybrominated diphenyl ethers’ flows and stocks by means of SFA.