Production of thermostable pectinase and xylanase for their potential application in bleaching of kraft pulp

A very high level of alkalophilic and thermostable pectinase and xylanase has been produced from newly isolated strains of Bacillus subtilis and Bacillus pumilus respectively. Enzyme production for pectinase was carried out under SSF using combinations of cheap agricultural residues while xylanase was produced under submerged fermentation using wheat bran as substrate to minimize the cost of production of these enzymes Among the various substrates tested, the highest yield of pectinase production was observed by using combination of WB + CW (6592 U/g of dry substrate) supplemented with 4% yeast extract when incubated at 37 °C for 72 h using deionized water of pH 7.0 as moistening agent. The biobleaching effect of these cellulase free enzymes on kraft pulp was determined. Both xylanase and pectinase showed stability over a broad range of pH from 6 to 10 and temperature from 55 to 70 °C. The bleaching efficiency of the pectinase and xylanase on kraft pulp was maximum after 150 min at 60 °C using enzyme dosage of 5 IU/ml of each enzyme at 10% pulp consistency with about 16% reduction in kappa number and 84% reduction in permanganate number. Enzyme treated pulp when subjected to CDED₁D₂ steps, 25% reduction in chlorine consumption and upto 19% reduction in consumption of chlorine dioxide was observed for obtaining the same %ISO brightness. Also an increase of 22 and 84% in whiteness and fluorescence respectively and a decrease of approximately 19% in the yellowness of the biotreated pulp were observed by pretreatment of the pulp with our enzymatic mixture.     

Application of crude xylanase from Bacillus licheniformis 77-2 to the bleaching of eucalyptus Kraft pulp

Alkalophilic Bacillus licheniformis 77-2 produced an extracellular alkali-tolerant xylanase with negligible cellulase activity in medium containing corn straw. The effectiveness of crude xylanase on treatment of eucalyptus Kraft pulp was evaluated. A biobleaching experiment was carried out to compare the chlorine saving with pulp treated and untreated by the enzyme. Two-stage bleaching was employed, using a ClO₂ chlorination and NaOH extraction (DE sequence). With the enzymatic treatment, in order to obtain the same value of Kappa number and brightness, respectively 28.5 and 30% less ClO₂ was required in comparison to the enzymatically untreated samples.     

Enzymatic bleaching of kraft pulp by xylanase from Aspergillus sydowii SBS 45

Crude xylanase from Aspergillus sydowii SBS 45 was tested for enzymatic bleaching of kraft (Decker) pulp. After optimization of three parameters, consistency of pulp, retention time and enzyme dose, considerable increase in the release of UV and visible absorbance spectra of materials and reducing sugars was observed, which clearly indicated the action of xylanase on pulp. Final brightness of pulp was increased from 29.42 to 70.42% and kappa number was reduced from 15.93 to 1.61, when 25 U of xylanase was given with a retention time of 5 h and at a consistency of 10%. When 10 U g⁻¹ xylanase was given, 14.3% elemental chlorine and 14.3% H₂O₂ could be reduced and when 25 U g⁻¹ xylanase was given 14.3% elemental chlorine and 28.6% H ₂O₂ could be reduced thereby retaining the brightness at control level.     

Family-10 and Family-11 xylanases differ in their capacity to enhance the bleachability of hardwood and softwood paper pulps

Enzyme-aided bleaching of softwood and hardwood kraft pulps by glycosyl hydrolase family-10 and -11 xylanases and a family-26 mannanase was investigated. The ability to release reducing sugar from pulp xylan and to enhance bleachability is not a characteristic shared by all xylanases. Of the six enzymes tested, two xylanases belonging to family 11 were most effective at increasing bleachability and improving final paper brightness. None of the enzymes had a deleterious effect on pulp fibre integrity. The efficiency of individual xylanases as bleach enhancers was not dependent on the source microorganism, and could not be predicted solely on the basis of the quantity or nature of products released from pulp xylan. Cooperative interactions between xylanase/xylanase and xylanase/mannanase combinations, during the pretreatment of softwood and hardwood pulps, were investigated. Synergistic effects on reducing-sugar release and kappa number reduction were elicited by a combination of two family-10 xylanases. Pretreatment of kraft pulp with mannanase A from Pseudomonas fluorescens subsp. cellulosa and any one of a number of xylanases resulted in increased release of reducing sugar and a larger reduction in kappa number than obtained with the xylanases alone, confirming the beneficial effects of family-26 mannanases on enzyme-aided bleaching of paper pulp. Received: 6 January 1997 / Received revision: 10 April 1997 / Accepted: 19 April 1997     

The performance of fungal xylan-degrading enzyme preparations in elemental chlorine-free bleaching for Eucalyptus pulp

Cellulase-free xylan-degrading enzyme preparations from Acrophialophora nainiana, Humicola grisea var. thermoidea and two Trichoderma harzianum strains were used as bleaching agents for Eucalyptus kraft pulp, prior to a chlorine dioxide and alkaline bleaching sequence. In comparison to the control sequence (performed without xylanase pretreatment), the sequence incorporating enzyme treatment was more effective. Removal of residual lignin was indicated by a reduction in kappa number. Overall, enzyme preparations from T. harzianum were marginally more effective in reducing pulp viscosity and chlorine chemical consumption and improving the brightness of the kraft pulp. However, the highest reduction in pulp viscosity was mediated by the xylanase preparation from A. nainiana. Xylanase pretreatment compares very favorably with that of chemical pulping. Journal of Industrial Microbiology & Biotechnology (2002) 28, 204–206 DOI: 10.1038/sj/jim/7000227 Received 27 April 2001/ Accepted in revised form 03 November 2001     

Bleaching of Hardwood Kraft Pulp with Manganese Peroxidase Secreted from Phanerochaete sordida YK-624

In vitro bleaching of an unbleached hardwood kraft pulp was performed with manganese peroxidase (MnP) from the fungus Phanerochaete sordida YK-624. When the kraft pulp was treated with partially purified MnP in the presence of MnSO₄, Tween 80, and sodium malonate with continuous addition of H₂O₂ at 37°C for 24 h, the pulp brightness increased by about 10 points and the kappa number decreased by about 6 points compared with untreated pulp. The pulp brightness was also increased by 43 points to 75.5% by multiple (six) treatments with MnP combined with alkaline extraction. Our results indicate that in vitro degradation of residual lignin in hardwood kraft pulp with MnP is possible.     

Identification of Paenibacillus sp. 2S-6 and application of its xylanase on biobleaching

A Paenibacillus sp. strain 2S-6 was isolated from the black liquor of the first brownstock washing stage of kraft pulping process and identified by its 16S rDNA sequence. This bacterial strain utilized a variety of saccharides and polysaccharides as carbon source, but neither lignin nor lipids. Crude xylanase from Paenibacillus sp. 2S-6 was produced in a 5 L laboratory fermenter at 37 °C, pH 7. After 24 h, up to 10.5 IU xylanase per mg of protein in the crude extract of fermentation broth was obtained. After two-stage ultrafiltration, the optimal activity of partially purified xylanase reached 60.51 IU/mg at 50 °C, pH 6. A major band indicating molecular weight of 33 kDa was shown on SDS-PAGE for the partially purified xylanase. After 4 h at 60 °C, 48.99% and 31.25% residual xylanase activities were demonstrated at pH 7 and 9, respectively. Efficacy of its xylanase on the bleaching agent saving was demonstrated by using 5 IU xylanase per gram oven-dried pulp prior to bleaching, referred as biobleaching. Identical levels of brightness and higher levels of viscosity were obtained for the xylanase pretreated eucalypt kraft pulps followed by a 20% reduction of the bleaching agent dosage in the first step of a commercial C₇₀/D₃₀-E_o-D bleaching sequence.     

The role of two Trichoderma reesei xylanases in the bleaching of pine kraft pulp

Summary The two major xylanases of Trichoderma reesei with different pI values and pH optima were compared for increasing the bleachability of pine kraft pulp. The efficiencies of the two enzymes acting on pulp substrate were very similar in hydrolysis yield, extraction kappa number or final brightness value. Only slight synergism between the two enzymes was observed in both hydrolysis and bleaching tests. The pH optimum of the pI 5.5 xylanase was similar in pulp treatment and in the hydrolysis of isolated substrates, and the bleaching result also correlated well with the hydrolysis of pulp xylan. By contrast, the pI 9.0 xylanase acted differently on pulp than on isolated xylans at different pH values and the pH optimum on pulp was increased. The bleachability of pulp by the pI 9.0 xylanase was improved more than expected at pH 7.0, although the hydrolysis of pulp xylan was substantially decreased. A similar phenomenon was also observed when the hydrolysis was performed in water instead of buffer. It thus appears that the degree of hydrolysis needed to obtain improved bleachability with pI 9.0 xylanase can be minimized by proper adjustment of the hydrolysis conditions. Correspondence to: J. Buchert     

Xylanase-induced reduction of chlorine dioxide consumption during elemental chlorine-free bleaching of different pulp types

The potential of crude xylanase from Thermomyces lanuginosus and Xylanase P (a commercial xylanase) was evaluated in bleaching of various paper pulp types. Xylanases released chromophores and reducing sugars and decreased kappa number of pulps. Chlorine-bleached, alkali-extracted bagasse and post-oxygen kraft pulps, pretreated with enzymes, gained over 5 brightness points over controls. Biobleaching of soda-aq pulp with Xylanase P produced chlorine dioxide savings of up to 30% or 4.5 kg chlorine dioxide t^–1 pulp.     

Effects of surfactants on the enzymatic bleaching of kraft pulp by xylanase

A xylanase was purified from a commercial crude xylanase, Pulpzyme HC, and used for the bleaching of kraft pulp in the absence or in the presence of nonionic surfactants, Tween 20, Tween 80, and Igepal C930. The purified xylanase has a molecular weight of 23,500 as determined by a reducing SDS-PAGE. Tween 20 was most effective to enhance the efficiency of the enzymatic bleaching of kraft pulp by xylanase.     

Changes in the structural composition of hardwood kraft pulp during bleaching

The possibility of using xylanase preparations for hydrolyzing hemicelluloses in a non-bleached kraft pulp in order to facilitate its bleaching was studied. The effects of enzymatic preparations of fungal and bacterial origins were examined, and the optimal conditions for xylanase activity were determined. UV spectroscopy demonstrated that the treatment of kraft pulp with enzymatic preparations containing xylanase facilitated the subsequent removal of lignin and increased the brightness by 5%. The effect of enzymatic treatment was retained in the case of peroxide bleaching. The enzymatic preparations studied are promising for the development of chlorine-free pulp bleaching technologies.     

Alkaline-active xylanase produced by an alkaliphilicBacillus sp isolated from kraft pulp

ABacillus sp (V1-4) was isolated from hardwood kraft pulp. It was capable of growing in diluted kraft black liquor at pH 11.5 and produced 49 IU (mol xylose min^–1 ml^–1) of xylanase when cultivated in alkaline medium at pH 9. Maximal enzyme activity was obtained by cultivation in a defined alkaline medium with 2% birchwood xylan and 1% corn steep liquor at pH 9, but high enzyme production was also obtained on wheat bran. The apparent pH optimum of the enzyme varied with the pH used for cultivation and the buffer system employed for enzyme assay. With cultivation at pH 10 and assays performed in glycine buffer, maximal activity was observed at pH 8.5; with phosphate buffer, maximal activity was between pH 6 and 7. The xylanase temperature optimum (at pH 7.0) was 55°C. In the absence of substrate, at pH 9.0, the enzyme was stable at 50°C for at least 30 min. Elecrophoretic analysis of the crude preparation showed one predominant xylanase with an alkaline pl. Biobleaching studies showed that the enzyme would brighten both hardwood and softwood kraft pulp and release chromophores at pH 7 and 9. Because kraft pulps are alkaline, this enzyme could be used for prebleaching with minimal pH adjustment.     

Application of statistically-based experimental designs for the optimization of nisin production from whey

Statistically-based experimental designs were applied for the optimization of nisin production by Lactococcus lactis in a whey-based medium. Yeast extract, KH₂PO₄, and MgSO₄ were identified to have significant effects on nisin biosynthesis by a Plackett–Burman design. These three significant factors were subsequently optimized using central composite design, and the optimal conditions were determined to be 12.067 g l^–1 for yeast extract, 0.569 g l^–1 for KH₂PO₄, and 0.572 g l^–1 for MgSO₄. The validity of the optimal conditions was verified by a separate experiment.     

A new xylanase from a Trichoderma harzianum strain

A new xylanase (XYL2) was purified from solid-state cultures of Trichoderma harzianum strain C by ultrafiltration and gel filtration. SDS-PAGE of the xylanase showed an apparent homogeneity and molecular weight of 18 kDa. It had the highest activity at pH 5.0 and 45°C and was stable at 50°C and pH 5.0 up to 4 h xylanase. XYL2 had a low K _m with insoluble oat spelt xylan as substrate. Compared to the amino acid composition of xylanases from Trichoderma spp, xylanase XYL2 presented a high content of glutamate/glutamine, phenylalanine and cysteine, and a low content of serine. Xylanase XYL2 improved the delignification and selectivity of unbleached hardwood kraft pulp. Received 02 February 1999/ Accepted in revised form 17 April 1999     

A comparison of two xylanases from the thermophilic fungi Thielavia terrestris and Thermoascus crustaceus

Two thermophilic xylanases (xylanase II from Thielavia terrestris 255B and the 32-kDa xylanase from Thermoascus crustaceus 235E) were studied to determine if they had different and complementary modes of action when they hydrolysed various types of xylans. Partial amino acid sequencing showed that these two enzymes belonged to different families of -1,4-glycanases. Xylanase II achieved faster solubilization of insoluble xylan whereas the 32-kDa xylanase was more effective in producing xylose and short xylooligomers. An assessment of the combined hydrolytic action of the two xylanases did not reveal any co-operative action. The sugars released when the two thermophilic xylanases were used together were almost identical to those released when the 32-kDa xylanase acted alone. The two xylanases were able to remove about 12% of the xylan remaining in an aspen kraft pulp. This indicated that either one of these thermophilic enzymes may be useful for enhancing the bleaching of kraft pulps. Correspondence to: J. N. Saddler     

Statistical optimization of medium components for the production of xylanase byAspergillus niger KK2 in submerged cultivation

Medium composition was optimized for the production of xylanase byAspergillus niger KK2 using statistical experimental designs. Corn steep liquor (CSL) and industrial yeast extract (IYE) were the most important factors affecting xylanase activity. The medium that produced the optimum conditions for the production of xylanase contained 3% rice straw, 1% wheat bran, 6.3% CSL, 0.15% IYE, and 0.5% KH₂PO₄. After 4 days of cultivation under optimized conditions in a 2.5-L stirred tank reactor the activity and productivity of xylanase were 620 IU/mL and 6,458 IU/L.h, respectively. The highest xylanase activity obtained using the optimized medium was 80% greater than the activity obtained using basal medium. The xylanase activity predicted by a polynomial model was 670 IU/ml.     

Investigation of hydroxamic acids as laccase-mediators for pulp bleaching

A number of hydroxamic acids have been synthesized and investigated as laccase-mediators for pulp bleaching. As compared with N-hydroxyacetanilide (NHA), one of the most effective laccase-mediators reported so far, N-(4-cyanophenyl)acetohydroxamic acid (NCPA), resulted in the highest brightness and lowest kappa number of hardwood kraft pulp of all the laccase-mediators studied. The bleaching efficacy of a laccase/7-cyano-4-hydroxy-2H-1,4-benzoxazin-3-one system was also comparable with that of a laccase/NHA system. A laccase/NCPA system was further studied for the bleaching of unbleached softwood kraft pulp. The effects of pulp consistency, laccase dosage, NCPA dosage, incubation time, and oxygen pressure on the bleaching efficacy of a laccase/NCPA system were studied.     

The effects of xylanase type enzymes on the different layers of birch wood ORGANOSOLV pulp fibre walls

Some effects of the xylanase treatment on the separate birch ORGANOSOLV pulp fibre wall morphological layers were examined. These investigations were focused on the outer layers, i.e. the primary wall (P) and the outer layer of the secondary wall (S₁), as well as the central layers, i.e. the central layer of the secondary wall (S₂) and the tertiary wall (T). Step by step, the fractionation of the pulp components in the polar solvents N,N-dimethylformamide (DMFA), dimethylsulphoxide (DMSO) and DMSO/H₃PO₄ was used as a mild technique for the isolation of the lignin-carbohydrate complexes. The different residual amounts of lignin and hemicelluloses in the outer and central pulp fibre wall layers as well as the different lignin-hemicellulose ratios were determined. The size-exclusion chromatographical (SEC) analysis showed a higher initial lignin content in the region of the high molecular mass (MM) fibre wall fraction extracted with “DMSO/H₃PO₄” than the outer cell wall layers. In the central layers, the amounts of soluble lignin (calculated on the mass of total dissolved substance) were approximately the same for all the three solvents. The xylanase treatment brought the most considerable changes in the high MM part of the residual lignin (the lignin carbohydrate complex). This was true for both the P-S₁ and S₂-T layers. The careful brightness comparison of the outer and central fractions after the X-E-P-P bleaching sequence showed a surprisingly low bleachability of the outer layer fraction. The xylanase action depended on the composition of the lignin-carbohydrate complex (LCC) and the extent of the maintenance of the outer layers during the pulping process.     

Production in <Emphasis Type="Italic">Trichoderma reesei</Emphasis> of three xylanases from <Emphasis Type="Italic">Chaetomium thermophilum</Emphasis>: a recombinant thermoxylanase for biobleaching of kraft pulp

Three endoxylanase genes were cloned from the thermophilic fungus Chaetomium thermophilum CBS 730.95. All genes contained the typical consensus sequence of family 11 glycoside hydrolases. Genomic copies of Ct xyn11A, Ct xyn11B, and Ct xyn11C were expressed in the filamentous fungus T. reesei under the control of the strong T. reesei cel7A (cellobiohydrolase 1, cbh1) promoter. The molecular masses of the Ct Xyn11A, Ct Xyn11B, and Ct Xyn11C proteins on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were 27, 23, and 22 kDa, respectively. Ct Xyn11A was produced almost as efficiently as the homologous xylanase II from a corresponding single-copy transformant strain. Ct Xyn11B production level was approximately half of that of Ct Xyn11A. The amount of Ct Xyn11C was remarkably lower. Ct Xyn11A had the highest temperature optimum and stability of the recombinant xylanases and the highest activity at acid-neutral pH (pH 5–7). It was the most suitable for industrial bleaching of kraft pulp at high temperature.     

Rosmarinic acid by Lavandula vera MM cell suspension: Phosphorus effect

Summary The growth of Lavandula vera MM cell suspension and biosynthesis of rosmarinic acid were followed during its cultivation in Linsmayer - Skoog (LS) medium (containing 170 mg/L KH₂PO₄, control cultivation) and in modified LS media, containing different concentration of KH₂PO₄. Doubled concentration of KH₂PO₄ (340 mg/L) caused an increase in the amount of biosynthesised cell biomass (17 g/L vs 13 g/L for control cultivation) and rosmarinic acid (140 mg/L vs 68 mg/L for control cultivation).