Improvement in the bleaching of kraft pulp with xylanase from Penicillium crustosum FP 11 isolated from the Atlantic forest

Xylanase produced from the newly isolated Penicillium crustosum FP 11 and its potential in the prebleaching of kraft pulp were evaluated using a statistical approach. A Plackett–Burman design (PBD) was carried out to select the significant variables of the medium, these being NaNO₃, KH₂PO₄, MgSO₄, KCl, Fe₂(SO₄)₃, yeast extract, corn stover, and initial pH, in a liquid culture under static conditions for 6 d at 28?°C. Statistical analysis with a central composite design and response surface methodology showed that 0.15% (w/v) KH₂PO₄, 2% (w/v) corn stover, and an initial pH of 6.0 provided the best conditions for xylanase production. Furthermore, xylanase from P. crustosum FP 11 was effective in the bleaching of Eucalyptus kraft pulp, with a significant kappa efficiency of 35.04%. Therefore, the newly isolated P. crustosum FP 11 from the Atlantic Forest biome in Brazil showed two advantages: xylanase production with agricultural residue (corn stover) as a carbon source and an improvement in the bleaching of kraft pulp. Environmental pollution could thus be minimized because of a reduction in the use of chlorine as a bleaching agent.     

Enhanced production of cellulase-free thermostable xylanase by Bacillus pumilus ASH and its potential application in paper industry

A very high level of cellulase-free, thermostable xylanase has been produced from newly isolated strain of Bacillus pumilus under submerged fermentation in a basal medium supplemented with wheat bran (2%, w/v) pH 8.0 and at 37 °C. After optimization of various production parameters, an increase of nearly 13-fold in xylanase production (5407 IU/ml) was achieved. The produced xylanase is stable in neutral to alkaline pH region at 70 °C. The suitability of this xylanase for use in the bioleaching of eucalyptus Kraft pulp was investigated. A xylanase dose of 5 IU/g of oven dried pulp of 10% consistency exhibited the optimum bleach boosting of the pulp at pH 7.0 and 60 °C after 180 min of treatment. An increase of 5% in brightness along with an increase of 21% and 28% in whiteness and fluorescence respectively, whereas 18% decrease in the yellowness of the biotreated pulp was observed. Enzyme treated pulp when subjected to chemical bleaching, resulted in 20% reduction in chlorine consumption and up to 10% reduction in consumption of chlorine dioxide. Also a reduction of about 16% in kappa number and 83% in permanganate number, along with a reduction in COD value and significant improvement in various pulp properties, viz. viscosity, tensile strength, breaking length, burst factor, burstness, tear factor and tearness were observed in comparison to the conventional chemical bleaching.     

Production of cellulase‐free xylanase by the recombinant Bacillus subtilis and its applicability in paper pulp bleaching

A metagenomic xylanase gene (Mxyl) was successfully cloned into shuttle vector pWH1520 and expressed in Bacillus subtilis extracellularly. On induction with xylose, recombinant xylanase secretion commenced after 6 h. Identifying critical variables for recombinant xylanase production by one‐variable‐at‐time approach followed by optimization of the selected variables (xylose, inoculum density, incubation density) by response surface methodology (RSM) led to three‐fold enhancement in extracellular xylanase production (119 U mL^?1). When the pulp was treated with recombinant xylanase at 80°C and pH 9.0, kappa number of the pulp was reduced with concomitant increase in brightness and 24% reduction in chlorine consumption. This is the first report on the expression of metagenomic xylanase gene in Bacillus subtilis extracellularly and its utility in developing an environment‐friendly pulp bleaching process. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1441–1447, 2013     

Cost-effective and concurrent production of industrially valuable xylano-pectinolytic enzymes by a bacterial isolate Bacillus pumilus AJK

Simultaneous production of xylanase and pectinase by Bacillus pumilus AJK under submerged fermentation was investigated in this study. Under optimized conditions, it produced 315?±?16 IU/mL acidic xylanase, 290?±?20 IU/mL alkaline xylanase, and 88?±?9 IU/mL pectinase. The production of xylano-pectinolytic enzymes was the highest after inoculating media (containing 2% each of wheat bran and Citrus limetta peel, 0.5% peptone, 10?mM MgSO₄, pH 7.0) with 2% of 21-hr-old culture and incubated at 37°C for 60?hr at 200?rpm. Xylanase retained 100% activity from pH 6.0 to10.0 after 3?hr of incubation, while pectinase showed 100% stability from pH 6.0 to 9.0 even after 6?hr of incubation. Cost-effective and concurrent production of xylanase and pectinase by a bacterial isolate in the same production media suggests its potential for various biotechnological applications. This is the first report of simultaneous production of industrially important extracellular xylano-pectinolytic enzymes by B. pumilus.     

Production of a <Emphasis Type="Italic">Trichoderma reesei</Emphasis> QM9414 xylanase in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its application in biobleaching of wheat straw pulp

The purpose of this study was to produce a Trichoderma reesei xylanase (XYN2) in Pichia pastoris and to test its potential application for pulp bleaching. The recombinant xylanase was purified by a two-step process of ultrafiltration and gel filtration chromatography. The molecular mass of the recombinant enzyme was 21 and 25 kDa by SDS–PAGE analysis, due to different glycosylation of the native protein. The optimum pH and temperature of the recombinant XYN2 was 5.0 and 50 °C. Enzyme activity was stable at 50 °C and at pH 5.0–7.0. The bleaching ability of the recombinant xylanase was also studied at 50 °C and pH 6.0, using wheat straw pulp. Biobleaching of the xylanase produced chlorine dioxide savings of up to 60%, while retaining brightness at the control level and led to a lower kappa number and small enhancements in tensile, burst and tear strength of pulp fibers.     

Xylanases from <Emphasis Type="Italic">Aspergillus niger,Aspergillus niveus</Emphasis> and <Emphasis Type="Italic">Aspergillus ochraceus</Emphasis> produced under solid-state fermentation and their application in cellulose pulp bleaching

This study describes the production of xylanases from Aspergillus niveus, A. niger, and A. ochraceus under solid-state fermentation using agro-industrial residues as substrates. Enzyme production was improved using a mixture of wheat bran and yeast extract or peptone. When a mixture of corncob and wheat bran was used, xylanase production from A. niger and A. ochraceus increased by 18%. All cultures were incubated at 30 °C at 70–80% relative humidity for 96 h. For biobleaching assays, 10 or 35 U of xylanase/g dry cellulose pulp were incubated at pH 5.5 for 1 or 2 h, at 55 °C. The delignification efficiency was 20%, the brightness (percentage of ISO) increased two to three points and the viscosity was maintained confirming the absence of cellulolytic activity. These results indicated that the use of xylanases could help to reduce the amount of chlorine compounds used in cellulose pulp treatment.     

Production of Xylanase of Bacillus coagulans and its bleaching potential

Summary The production of xylanase from Bacillus coagulans has been studied with respect to the environmental parameters, the carbon source and the concentration of carbon source at the shake flask level. Among the various carbon sources used, wheat straw powder favoured higher enzyme production. Xylan isolated from wheat straw gave higher enzyme production as compared to the birchwood xylan. Maximum enzyme activity of 165 IU/ml was obtained with 2% wheat straw xylan in a shake flask study. Improvement of xylanase production was achieved by increasing the wheat straw powder concentration up to 3%. Enzyme has optimum activity at a temperature of 55 °C and pH of 7. The concentrated crude enzyme was found to reduce the kappa number of enzyme-treated eucalyptus pulp by␣5.45% with a marginal increase in the CED viscosity of the enzyme treated pulp as compared to the non-enzymatically treated pulp.     

Potential of xylanase from thermophilic Bacillus sp. XTR-10 in biobleaching of wood kraft pulp

An extracellular xylanase produced under optimal conditions by a thermophilic strain of Bacillus sp. XTR-10 was evaluated for its potential application in biobleaching of wood kraft pulp. Spectrophotometric analysis showed considerable release of lignin derived compounds and chromophoric material by the xylanase treated pulp samples. Xylanase was found to be effective in the liberation of reducing sugars in the pulp filtrates with increment in enzyme dose and reaction time. Eight hours pretreatment with 40 IU of xylanase/g of dry pulp resulted in 16.2% reduction of kappa number with 25.94% ISO increase in brightness as compared to the control. The same treatment slightly lowered the tensile strength and burst index, however. Enzyme pretreatment of the pulp saved 15% active chlorine charges in single step and 18.7% in multiple steps chemical bleaching with attainment of brightness at the level of the control. These results indicate the potential of enzymatic pretreatment of pulp for reduction in environmental discharge of hazardous waste from the pulp and paper industry.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

A new xylanase from a Trichoderma harzianum strain

A new xylanase (XYL2) was purified from solid-state cultures of Trichoderma harzianum strain C by ultrafiltration and gel filtration. SDS-PAGE of the xylanase showed an apparent homogeneity and molecular weight of 18 kDa. It had the highest activity at pH 5.0 and 45°C and was stable at 50°C and pH 5.0 up to 4 h xylanase. XYL2 had a low K _m with insoluble oat spelt xylan as substrate. Compared to the amino acid composition of xylanases from Trichoderma spp, xylanase XYL2 presented a high content of glutamate/glutamine, phenylalanine and cysteine, and a low content of serine. Xylanase XYL2 improved the delignification and selectivity of unbleached hardwood kraft pulp. Received 02 February 1999/ Accepted in revised form 17 April 1999     

The performance of fungal xylan-degrading enzyme preparations in elemental chlorine-free bleaching for Eucalyptus pulp

Cellulase-free xylan-degrading enzyme preparations from Acrophialophora nainiana, Humicola grisea var. thermoidea and two Trichoderma harzianum strains were used as bleaching agents for Eucalyptus kraft pulp, prior to a chlorine dioxide and alkaline bleaching sequence. In comparison to the control sequence (performed without xylanase pretreatment), the sequence incorporating enzyme treatment was more effective. Removal of residual lignin was indicated by a reduction in kappa number. Overall, enzyme preparations from T. harzianum were marginally more effective in reducing pulp viscosity and chlorine chemical consumption and improving the brightness of the kraft pulp. However, the highest reduction in pulp viscosity was mediated by the xylanase preparation from A. nainiana. Xylanase pretreatment compares very favorably with that of chemical pulping. Journal of Industrial Microbiology & Biotechnology (2002) 28, 204–206 DOI: 10.1038/sj/jim/7000227 Received 27 April 2001/ Accepted in revised form 03 November 2001     

Enzymatic bleaching of kraft pulp by xylanase from Aspergillus sydowii SBS 45

Crude xylanase from Aspergillus sydowii SBS 45 was tested for enzymatic bleaching of kraft (Decker) pulp. After optimization of three parameters, consistency of pulp, retention time and enzyme dose, considerable increase in the release of UV and visible absorbance spectra of materials and reducing sugars was observed, which clearly indicated the action of xylanase on pulp. Final brightness of pulp was increased from 29.42 to 70.42% and kappa number was reduced from 15.93 to 1.61, when 25 U of xylanase was given with a retention time of 5 h and at a consistency of 10%. When 10 U g⁻¹ xylanase was given, 14.3% elemental chlorine and 14.3% H₂O₂ could be reduced and when 25 U g⁻¹ xylanase was given 14.3% elemental chlorine and 28.6% H ₂O₂ could be reduced thereby retaining the brightness at control level.     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.     

Production and characterization of thermostable xylanase and pectinase from Streptomyces sp. QG-11-3

Streptomyces sp. QG-11-3, which produces a cellulase-free thermostable xylanase (96 IU ml⁻¹) and a pectinase (46 IU ml⁻¹), was isolated on Horikoshi medium supplemented with 1% w/v wheat bran. Carbon sources that favored xylanase production were rice bran (82 IU ml⁻¹) and birch-wood xylan (81 IU ml⁻¹); pectinase production was also stimulated by pectin and cotton seed cake (34 IU ml⁻¹ each). The partially purified xylanase and pectinase were optimally active at 60°C. Both enzymes were 100% stable at 50°C for more than 24 h. The half-lives of xylanase and pectinase at 70, 75 and 80°C were 90, 75 and 9 min, and 90, 53 and 7 min, respectively. The optimum pH values for xylanase and pectinase were 8.6 and 3.0, respectively, at 60°C. Xylanase and pectinase were stable over a broad pH range between 5.4 and 9.4 and 2.0 to 9.0, respectively, retaining more than 85% of their activity. Ca²⁺ stimulated the activity of both enzymes up to 7%, whereas Cd²⁺, Co²⁺, Cr³⁺, iodoacetic acid and iodoacetamide inhibited xylanase up to 35% and pectinase up to 63%; at 1 mM, Hg²⁺ inhibited both enzymes completely. Journal of Industrial Microbiology & Biotechnology (2000) 24, 396–402. Received 29 September 1999/ Accepted in revised form 02 February 2000     

Xylanase-induced reduction of chlorine dioxide consumption during elemental chlorine-free bleaching of different pulp types

The potential of crude xylanase from Thermomyces lanuginosus and Xylanase P (a commercial xylanase) was evaluated in bleaching of various paper pulp types. Xylanases released chromophores and reducing sugars and decreased kappa number of pulps. Chlorine-bleached, alkali-extracted bagasse and post-oxygen kraft pulps, pretreated with enzymes, gained over 5 brightness points over controls. Biobleaching of soda-aq pulp with Xylanase P produced chlorine dioxide savings of up to 30% or 4.5 kg chlorine dioxide t^–1 pulp.     

Production,purification and characterization of <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE7 xylanase and its application in eucalyptus Kraft pulp biobleaching

Production of extracellular xylanase from Bacillus sp. GRE7 using a bench-top bioreactor and solid-state fermentation (SSF) was attempted. SSF using wheat bran as substrate and submerged cultivation using oat-spelt xylan as substrate resulted in an enzyme productivity of 3,950 IU g⁻¹ bran and 180 IU ml⁻¹, respectively. The purified enzyme had an apparent molecular weight of 42 kDa and showed optimum activity at 70°C and pH 7. The enzyme was stable at 60–80°C at pH 7 and pH 5–11 at 37°C. Metal ions Mn²⁺ and Co²⁺ increased activity by twofold, while Cu²⁺ and Fe²⁺ reduced activity by fivefold as compared to the control. At 60°C and pH 6, the K _m for oat-spelt xylan was 2.23 mg ml⁻¹ and V _max was 296.8 IU mg⁻¹ protein. In the enzymatic prebleaching of eucalyptus Kraft pulp, the release of chromophores, formation of reducing sugars and brightness was higher while the Kappa number was lower than the control with increased enzyme dosage at 30% reduction of the original chlorine dioxide usage. The thermostability, alkali-tolerance, negligible presence of cellulolytic activity, ability to improve brightness and capacity to reduce chlorine dioxide usage demonstrates the high potential of the enzyme for application in the biobleaching of Kraft pulp.     

Application of thermoalkalophilic xylanase from Arthrobacter sp. MTCC 5214 in biobleaching of kraft pulp

A thermoalkalophilic and cellulase-free xylanase produced from Arthrobacter sp. MTCC 5214 by solid-state fermentation using wheat bran as a carbon source was evaluated for prebleaching of kraft pulp. The UV absorption spectrum of the compounds released by enzyme treatment showed a characteristic peak at 280 nm, indicating the presence of lignin in the released colouring matter. Enzymatic prebleaching of kraft pulp showed 20% reduction in kappa number of the pulp without much change in viscosity. Enzymatic treatment reduced the amount of chlorine by 29% without any decrease in brightness. The viscosity of xylanase treated pulp was 4.0 p, whereas the viscosity of the pulp treated exclusively with chlorine was 4.1 p.     

Application of crude xylanase from Bacillus licheniformis 77-2 to the bleaching of eucalyptus Kraft pulp

Alkalophilic Bacillus licheniformis 77-2 produced an extracellular alkali-tolerant xylanase with negligible cellulase activity in medium containing corn straw. The effectiveness of crude xylanase on treatment of eucalyptus Kraft pulp was evaluated. A biobleaching experiment was carried out to compare the chlorine saving with pulp treated and untreated by the enzyme. Two-stage bleaching was employed, using a ClO₂ chlorination and NaOH extraction (DE sequence). With the enzymatic treatment, in order to obtain the same value of Kappa number and brightness, respectively 28.5 and 30% less ClO₂ was required in comparison to the enzymatically untreated samples.     

Enhanced production of cellulase-free thermostable xylanase by Bacillus pumilus ASH and its potential application in paper industry

A very high level of cellulase-free, thermostable xylanase has been produced from newly isolated strain of Bacillus pumilus under submerged fermentation in a basal medium supplemented with wheat bran (2%, w/v) pH 8.0 and at 37 °C. After optimization of various production parameters, an increase of nearly 13-fold in xylanase production (5407 IU/ml) was achieved. The produced xylanase is stable in neutral to alkaline pH region at 70 °C. The suitability of this xylanase for use in the bioleaching of eucalyptus Kraft pulp was investigated. A xylanase dose of 5 IU/g of oven dried pulp of 10% consistency exhibited the optimum bleach boosting of the pulp at pH 7.0 and 60 °C after 180 min of treatment. An increase of 5% in brightness along with an increase of 21% and 28% in whiteness and fluorescence respectively, whereas 18% decrease in the yellowness of the biotreated pulp was observed. Enzyme treated pulp when subjected to chemical bleaching, resulted in 20% reduction in chlorine consumption and up to 10% reduction in consumption of chlorine dioxide. Also a reduction of about 16% in kappa number and 83% in permanganate number, along with a reduction in COD value and significant improvement in various pulp properties, viz. viscosity, tensile strength, breaking length, burst factor, burstness, tear factor and tearness were observed in comparison to the conventional chemical bleaching.     

Production and properties of xylanases from Aspergillus terricola Marchal and Aspergillus ochraceus and their use in cellulose pulp bleaching

Aspergillus terricola and Aspergillus ochraceus, isolated from Brazilian soil, were cultivated in Vogel and Adams media supplemented with 20 different carbon sources, at 30 °C, under static conditions, for 120 and 144 h, respectively. High levels of cellulase-free xylanase were produced in birchwood or oat spelt xylan-media. Wheat bran was the most favorable agricultural residue for xylanase production. Maximum activity was obtained at 60 °C and pH 6.5 for A. terricola, and 65 °C and pH 5.0 for A. ochraceus. A. terricola xylanase was stable for 1 h at 60 °C and retained 50% activity after 80 min, while A. ochraceus xylanase presented a t ₅₀ of 10 min. The xylanases were stable in an alkali pH range. Biobleaching of 10 U/g dry cellulose pulp resulted in 14.3% delignification (A. terricola) and 36.4% (A. ochraceus). The brightness was 2.4–3.4% ISO higher than the control. Analysis in SEM showed defibrillation of the microfibrils. Arabinase traces and β-xylosidase were detected which might act synergistically with xylanase.