A Highly Sensitive and Selective Hydrogen Peroxide Biosensor Based on Gold Nanoparticles and Three-Dimensional Porous Carbonized Chicken Eggshell Membrane

A sensitive and noble amperometric horseradish peroxidase (HRP) biosensor is fabricated via the deposition of gold nanoparticles (AuNPs) onto a three-dimensional (3D) porous carbonized chicken eggshell membrane (CESM). Due to the synergistic effects of the unique porous carbon architecture and well-distributed AuNPs, the enzyme-modified electrode shows an excellent electrochemical redox behavior. Compared with bare glass carbon electrode (GCE), the cathodic peak current of the enzymatic electrode increases 12.6 times at a formal potential of −100mV (vs. SCE) and charge-transfer resistance decreases 62.8%. Additionally, the AuNPs-CESM electrode exhibits a good biocompatibility, which effectively retains its bioactivity with a surface coverage of HRP 6.39×10⁻⁹ mol cm⁻² (752 times higher than the theoretical monolayer coverage of HRP). Furthermore, the HRP-AuNPs-CESM-GCE electrode, as a biosensor for H₂O₂ detection, has a good accuracy and high sensitivity with the linear range of 0.01–2.7 mM H₂O₂ and the detection limit of 3μM H₂O₂ (S/N = 3).     

A nanocomposite/crude extract enzyme-based xanthine biosensor

A novel amperometric biosensor for xanthine was developed based on covalent immobilization of crude xanthine oxidase (XOD) extracted from bovine milk onto a hybrid nanocomposite film via glutaraldehyde. Toward the preparation of the film, a stable colloids solution of core–shell Fe₃O₄/polyaniline nanoparticles (PANI/Fe₃O₄ NPs) was dispersed in solution containing chitosan (CHT) and H₂PtCl₆ and electrodeposited over the surface of a carbon paste electrode (CPE) in one step. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used for characterization of the electrode surface. The developed biosensor (XOD/CHT/Pt NPs/PANI/Fe₃O₄/CPE) was employed for determination of xanthine based on amperometric detection of hydrogen peroxide (H₂O₂) reduction at –0.35 V (vs. Ag/AgCl). The biosensor exhibited a fast response time to xanthine within 8 s and a linear working concentration range from 0.2 to 36.0 μM (R² = 0.997) with a detection limit of 0.1 μM (signal/noise [S/N] = 3). The sensitivity of the biosensor was 13.58 μA μM⁻¹ cm⁻². The apparent Michaelis–Menten (K_m) value for xanthine was found to be 4.7 μM. The fabricated biosensor was successfully applied for measurement of fish and chicken meat freshness, which was in agreement with the standard method at the 95% confidence level.     

Disposable biosensor and biocatalysis of horseradish peroxidase based on sodium alginate film and room temperature ionic liquid

Composite material based on room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆), sodium alginate (SA), and graphite was used to construct a novel horseradish peroxidase (HRP) biosensor for the determination of H₂O₂. The morphology of the as-prepared biosensor was characterized by scanning electron microscopy (SEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the process of the performance of the biosensor. Parameters affecting the performance of the biosensor, including the concentrations of o-aminophenol (OAP) and HRP and the pH value of substrate solution, were optimized. Under the optimized experimental conditions, H₂O₂ could be detected in a linear calibration range of 1.0 to 6.0 μM with a correlation coefficient of 0.9847 (n = 7) and a detection limit of 0.5 μM at a signal/noise ratio of 3. The prepared biosensor not only had economic and disposable property but also showed good detection precision, bioactivity, storage stability, and reproducibility.     

Direct electrochemistry of horseradish peroxidase immobilized on DNA/electrodeposited zirconium dioxide modified,gold disk electrode

A novel H₂O₂ biosensor is described which is based on immobilization of horseradish peroxidase (HRP) on DNA/electrodeposited, ZrO₂/modified, gold electrode. The DNA is attached via its 5′ end to ZrO₂ and this provides a microenvironment for the immobilization of various biomolecules and promotes electron transfer between HRP and the electrode surface. Under optimized conditions, the biosensor reduced H₂O₂ linearly between 3.5 μM and 10 mM with a detection limit of 0.8 μM at a signal-to-noise ratio of 3. In addition, the developed biosensor shows an acceptable stability and repeatability. Importantly, the analytical methodology could be further developed for the immobilization of other proteins and biocompounds.     

Immobilization of rat brain acetylcholinesterase on porous gold-nanoparticle-CaCO₃ hybrid material modified Au electrode for detection of organophosphorous insecticides

An acetylcholinesterase (AChE) purified from rat brain was immobilized onto gold nanoparticles (AuNPs) assembled on the surface of porous calcium carbonate (CaCO₃) microsphere. The resulting AChE-AuNPs-CaCO₃ bioconjugate was mounted on the surface of Au electrode with the help of silica sol-gel matrix to prepare the working electrode. This electrode was connected to Ag/AgCl (3 M/saturated KCl) as standard and Pt wire as an auxiliary electrode through a potentiostat to construct an organophosphorus (OP) biosensor. The biosensor was based on inhibition of AChE by OP compounds/insecticides. The biosensor showed optimum response at pH 7.0, 30 °C, when polarized at +0.2 V. Two OP compounds, malathion and chlorpyrifos could be detected in the range of 0.1-100 nM and 0.1-70 nM, respectively at 2.0-3.0% inhibition level of AChE. The sensor was reactivated by immersing it in 0.1 mM 2-pyridine aldoxime for 10 min. The detection limit of the sensor was 0.1 nM for both malathion and chlorpyrifos. The biosensor exhibited good reusability (50 times without considerable loss) and storage stability (50% within 60 days, when stored at 4 °C).     

One-step homogeneous non-stripping chemiluminescence metal immunoassay based on catalytic activity of gold nanoparticles

The catalytic activity of gold nanoparticles (AuNPs) on a luminol–H₂O₂ chemiluminescence (CL) system is found to be greatly enhanced after its crosslinking aggregation induced by immunoreaction. Based on this observation, a one-step homogeneous non-stripping CL metalloimmunoassay was designed. In the presence of corresponding antigen (Ag), the immunoreaction caused the aggregation of antibody (Ab)-modified AuNPs, and these crosslinking aggregated AuNPs could catalyze luminol–H₂O₂ CL reaction to produce a much stronger CL signal than dispersed Ab-modified AuNPs. The assay, including immunoreaction and detection, can be accomplished in homogeneous solution. In the assay, no tedious and strict stripping of metal nanoparticles, difficult synthesis of labels, multiple steps of immunoreactions and washings, and complicated magnetic separation process were required. The detection limit of human immunoglobulin G (IgG, 3σ) was estimated to be as low as 3.2 × 10⁻¹¹ g ml⁻¹. The sensitivity was increased by two orders of magnitude over that of other AuNP-based CL immunoassay. The current CL metalloimmunoassay offers the advantages of being simple, cheap, rapid, and sensitive.     

An amperometric biosensor fabricated from electro-co-deposition of sodium alginate and horseradish peroxidase

A convenient and effective strategy for fabrication of hydrogen peroxide biosensor based on sodium alginate (SA) and polyvinyl butyral (PVB) as matrices was reported in this paper. The horseradish peroxidase (HRP) and SA were electro-co-deposited onto the surface of gold electrode, and the HRP–SA/Au electrode was further coated with PVB. The interaction between HRP and SA was characterized by UV–vis absorption spectroscopy, and the fabricating process of biosensor was characterized by electrochemical impedance spectroscopy (EIS). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. Experimental conditions were investigated which influence the performance of the biosensor, such as pH, and applied potential. The biosensor showed a linear response to H₂O₂ over a concentration range from 7.0 × 10⁻⁶ to 4.1 × 10⁻³ M with a detection limit of 1.8 × 10⁻⁶ M based on a signal-to-noise ratio of 3 under optimum conditions. The value of HRP in the composite was evaluated to be 1.38 mM. The biosensor obtained from this study possesses high sensitivity, good reproducibility, and long-term stability.     

Electrochemical immunosensor for α-fetoprotein detection using ferroferric oxide and horseradish peroxidase as signal amplification labels

An electrochemical immunosensor for quantitative detection of α-fetoprotein (AFP) in human serum was developed using graphene sheets (GS) and thionine (TH) as electrode materials and mesoporous silica nanoparticles (MSNs) loaded with ferroferric oxide (Fe₃O₄) nanoparticles and horseradish peroxidase (HRP) as labels for signal amplification. In this study, the compound of GS and TH (GS–TH) was used as a substrate for promoting electron transfer and immobilization of primary antibody of AFP (Ab₁). MSNs were used as a carrier for immobilization of secondary antibody of AFP (Ab₂), Fe₃O₄, and HRP. The synergistic effect occurred between Fe₃O₄ and HRP and greatly improved the sensitivity of the immunosensor. This method could detect AFP over a wide concentration range from 0.01 to 25 ng ml⁻¹ with a detection limit of 4 pg ml⁻¹. This strategy may find wide potential application in clinical analysis or detection of other tumor markers.     

Spectrophotometric quantification of horseradish peroxidase with o-phenylenediamine

The assay conditions for the spectrophotometric quantification of horseradish peroxidase (HRP) with the chromogenic substrate o-phenylenediamine (OPD) at 25 °C in the presence of hydrogen peroxide (H₂O₂) were optimized. With [OPD]₀ = 3.14 mM and [H₂O₂]₀ = 80 μM at pH 7.2, the initial formation of only one of the possible reaction products and intermediates, 2,3-diaminophenazine (DAP, λ_max = 417 nm), was observed. The rate of DAP formation during the first 30 min of reaction was followed spectrophotometrically and found to linearly depend on the HRP concentration between 5 and 45 pM under the conditions used.     

Chemiluminescent determination of H2O2 using 4-(1,2,4-triazol-1-yl)phenol as an enhancer based on the immobilization of horseradish peroxidase onto magnetic beads

This article describes the employment of a novel p-phenol derivative, 4-(1,2,4-triazol-1-yl)phenol (TRP), as a highly potent signal enhancer of the luminol-hydrogen peroxide (H₂O₂)-horseradish peroxidase (HRP) chemiluminescence (CL) system. The CL reaction conditions were optimized, and the enhancement characteristics of TRP were compared with those of p-iodophenol (PIP). TRP produced a strong enhancement of the CL with the effect of prolonging the light emission. The developed system was then applied to the determination of H₂O₂ with immobilized HRP using magnetic beads as a solid support. The linear range for H₂O₂ was 2.0 × 10⁻⁶ to 1.0 × 10⁻³ M. The detection limit for H₂O₂ was 2.0 × 10⁻⁶ M. The proposed sensor was applied successfully to the determination of H₂O₂ in rainwater.     

Analysis of peroxidase activity of rice (Oryza sativa) recombinant hemoglobin 1: Implications for in vivo function of hexacoordinate non-symbiotic hemoglobins in plants

In plants, it has been proposed that hexacoordinate (class 1) non-symbiotic Hbs (nsHb-1) function in vivo as peroxidases. However, little is known about peroxidase activity of nsHb-1. We evaluated the peroxidase activity of rice recombinant Hb1 (a nsHb-1) by using the guaiacol/H₂O₂ system at pH 6.0 and compared it to that from horseradish peroxidase (HRP). Results showed that the affinity of rice Hb1 for H₂O₂ was 86-times lower than that of HRP (K_m = 23.3 and 0.27 mM, respectively) and that the catalytic efficiency of rice Hb1 for the oxidation of guaiacol using H₂O₂ as electron donor was 2838-times lower than that of HRP (k_cat/K_m = 15.8 and 44 833 mM⁻¹ min⁻¹, respectively). Also, results from this work showed that rice Hb1 is not chemically modified and binds CO after incubation with high H₂O₂ concentration, and that it poorly protects recombinant Escherichia coli from H₂O₂ stress. These observations indicate that rice Hb1 inefficiently scavenges H₂O₂ as compared to a typical plant peroxidase, thus indicating that non-symbiotic Hbs are unlikely to function as peroxidases in planta.     

A carbon nanotube/silica sol–gel architecture for immobilization of horseradish peroxidase for electrochemical biosensor

A novel third-generation biosensor for hydrogen peroxide (H₂O₂) has been constructed based on horseradish peroxidase (HRP) immobilized by the sol–gel (SG) technology on carbon nanotube (CNT)-modified electrode. CNT has good promotion effects on the direct electron transfer between HRP and the electrode surface and the SG network provides a biocompatible microenvironment for enzyme. The immobilized HRP retained its bioelectrocatalytic activity for the reduction of hydrogen peroxide and can respond to the change of concentration of H₂O₂ rapidly. The heterogeneous electron transfer rate constant was evaluated to be 2.8 ± 0.4 s⁻¹. The amperometric response to H₂O₂ shows a linear relation in the range from 0.5 to 300 μmol l⁻¹ and a detection limit of 0.1 μmol l⁻¹ (S/N = 3). The K _M^app value of HRP immobilized on the electrode surface was found to be 1.35 mmol l⁻¹. The biosensor exhibited high sensitivity, rapid response and excellent long-term stability.     

Large catalase based bioelectrode for biosensor application

A large catalase (CAT) (Mr ~ 90 kDa), immobilized on multiwalled carbon nanotubes—Nafion^® (MWCNT-NF) matrix and encapsulated with polyethylenimine (PEI) on glassy carbon electrode (GCE), showed a pair of nearly reversible cyclic voltammetric peaks for Fe^(III)/Fe^(II) couple with formal potential of about −0.45 V (vs. Ag/AgCl electrode at pH 7.5). PEI significantly reduced the charge transfer resistance and stabilized the bioelectrode through electrostatic interaction. The electron transfer rate constant and surface coverage of the immobilized CAT were 1.05 ± 0.2 s⁻¹ and 2.1 × 10⁻¹⁰ mol cm⁻², respectively. Studies on electrocatalytic activity and kinetics of GCE/MWCNT-NF/CAT/PEI for hydrogen peroxide (H₂O₂) showed the apparent Michaelis-Menten constant of 3 mM, linear response in the range of 10 μM to 5 mM, response time of ~ 2 s for steady state current, and detection limit of ~ 1 μM. A high operational and storage stability was also demonstrated for the bioelectrode. Hence, the direct electrochemistry of the large catalase and its potential biosensor application have been established through this investigation.     

Construction of a triglyceride amperometric biosensor based on chitosan-ZnO nanocomposite film

A method is described for construction of a novel amperometric triglyceride (TG) biosensor based on covalent co-immobilization of lipase, glycerol kinase (GK) and glycerol-3-phosphate oxidase (GPO) onto chitosan (CHIT) and zinc oxide nanoparticles (ZnONPs) composite film deposited on the surface of Pt electrode. The enzymes-ZnONPs-CHIT composite was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The sensor showed optimum response within 6 s at pH 7.5 and temperature of 35 °C. The sensor measures current due to electrons generated at 0.4 V against Ag/AgCl from H₂O₂, which is produced from triolein by co-immobilized enzymes. A linear relationship was obtained between a wide triolein concentration range (50-650 mg/dl) and current (mA) under optimum conditions. The biosensor showed high sensitivity, low detection limit (20 mg/dl) and good storage stability (half-life of 7 months at 4 °C). The biosensor was unaffected modified by a number of serum substances at their physiological concentrations. The biosensor was evaluated and employed for determination of TG in sera in apparently healthy subjects and persons suffering from hypertriglyceridemia.     

Modulation of advanced glycation endproduct synthesis by kynurenines in human lens proteins

Human lens proteins (HLP) become chemically modified by kynurenines and advanced glycation end products (AGEs) during aging and cataractogenesis. We investigated the effects of kynurenines on AGE synthesis in HLP. We found that incubation with 5 mM ribose or 5 mM ascorbate produced significant quantities of pentosidine, and this was further enhanced in the presence of two different kynurenines (200–500 µM): N-formylkynurenine (Nfk) and kynurenine (Kyn). Another related compound, 3-hydroxykynurenine (3OH-Kyn), had disparate effects; low concentrations (10–200 µM) promoted pentosidine synthesis, but high concentrations (200–500 µM) inhibited it. 3OH-Kyn showed similar effects on pentosidine synthesis from Amadori-enriched HLP or ribated lysine. Chelex-100 treatment of phosphate buffer reduced pentosidine synthesis from Amadori-enriched HLP by ∼ 90%, but it did not inhibit the stimulating effect of 3OH-Kyn and EDTA. 3OH-Kyn (100–500 μM) spontaneously produced copious amounts of H₂O₂ (10–25 μM), but externally added H₂O₂ had only a mild stimulating effect on pentosidine but had no effect on N^ε-carboxymethyl lysine (CML) synthesis in HLP from ribose and ascorbate. Further, human lens epithelial cells incubated with ribose and 3OH-Kyn showed higher intracellular pentosidine than cells incubated with ribose alone. CML synthesis from glycating agents was inhibited 30 to 50% by 3OH-Kyn at concentrations of 100–500 μM. Argpyrimidine synthesis from 5 mM methylglyoxal was slightly inhibited by all kynurenines at concentrations of 100–500 μM. These results suggest that AGE synthesis in HLP is modulated by kynurenines, and such effects indicate a mode of interplay between kynurenines and carbohydrates important for AGE formation during lens aging and cataract formation.     

Determination of nanomolar uric and ascorbic acids using enlarged gold nanoparticles modified electrode

Individual and simultaneous determination of 50 nM uric acid (UA) and ascorbic acid (AA) using enlarged, citrate-stabilized gold nanoparticles (AuNPs) self-assembled to 2,5-dimercapto-1,3,4-thiadiazole (DMT) monolayer modified Au (Au/DMT) electrode by an amperometric method is described for the first time. Self-assembly of AuNPs on the electrode surface was confirmed by atomic force microscopy (AFM), attenuated total reflectance FT-IR and diffuse reflectance spectral measurements. The electron transfer reaction (ETR) of [Fe(CN)₆]^3−/4− was blocked at Au/DMT electrode, whereas it was restored with a peak separation of 200 mV after the attachment of AuNPs on the Au/DMT (Au/DMT/AuNPs) electrode, which was confirmed from the ETR of the [Fe(CN)₆]^3−/4− redox couple. When the self-assembled AuNPs were enlarged by hydroxylamine seeding, the ETR of [Fe(CN)₆]^3−/4− was improved significantly with a peak separation of 100 mV. Tapping mode AFM showed that the average size of the enlarged-AuNPs (E-AuNPs) was 50-70 nm. The E-AuNPs modified electrode catalyzes the oxidation of AA and UA, separates their voltammetric signals by 200 mV, and has excellent sensitivity towards AA and UA with a detection limit of 50 nM. The practical application of the modified electrode was demonstrated by measuring the concentration of UA in blood serum and urine.     

Amperometric biosensor for hydrogen peroxide based on horseradish peroxidase onto gold nanowires and TiO2 nanoparticles

An electrochemical biosensor for determination of hydrogen peroxide (H₂O₂) was fabricated, based on the electrostatic immobilization of horseradish peroxidase (HRP) with one-dimensional gold nanowires (Au NWs) and TiO₂ nanoparticles (nano-TiO₂) on a gold electrode. The nano-TiO₂ can give a biocompatible microenvironment and compact film, and the Au NWs can provide fast electron transferring rate and greatly add the amount of HRP molecules immobilized on the electrode surface. Au NWs were characterized by ultraviolet–visible spectra and transmission electron microscope. The electrode modification process was probed by cyclic voltammetry and electrochemical impedance spectroscopy. Chronoamperometry was used to study the electrochemical performance of the resulting biosensor. Under optimal conditions, the linear range for the determination of H₂O₂ was from 2.3 × 10⁻⁶ to 2.4 × 10⁻³ M with a detection limit of 7.0 × 10⁻⁷ M (S/N = 3). Moreover, the proposed biosensor showed superior stability and high sensitivity.     

Stoichiometry of electrocatalytic cycle of cytochrome P450 2B4

Stoichiometry of the electrocatalytical cycle of cytochrome P450 2B4 was studied in kinetic mode according to bielectrode scheme. Graphite screen-printed electrodes with immobilized cytochrome P450 2B4 were used as the operating electrode (at the potential E^0′ = −450 mV) and electrodes, modified with cytochrome c (E^0′ = −50 mV) or Prussian Blue (E^0′ = 0), as measuring electrodes (for H₂O₂) and Clark-type electrode (for O₂). Benzphetamine N-demethylation rate was 17 ± 3 nmol/nmol of enzyme/min, peroxide production was 4.8 ± 0.7 nmol/nmol of enzyme/min (substrate-free system), 3.3 ± 0.6 nmol/nmol of enzyme/min (0.5 mM benzphetamine), the oxygen consumption rate by Р450 2В4 was 19.4 ± 0.6 nmol/nmol of enzyme/min (in the presence of benzphetamine), 4.8 ± 0.4 nmol/nmol of enzyme/min (without substrate). Based on stoichiometry of P450 electrocatalysis adequacy of electrochemical reduction and P450-monooxygenase system was revealed.     

Amperometric hydrogen peroxide biosensor based on covalently immobilizing thionine as a mediator

A novel amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on the 2,6-pyridinedicarboxylic acid (PDC) polymer, thionine and nano-Au was successfully fabricated. In this strategy, PDC polymer acted as the matrices to covalently immobilize the thionine, and then hemoglobin was successfully adsorbed on the nano-Au which was electro-deposited on to thionine modified electrode surface. The preparation process of modified electrode was characterized with electrochemical impedance spectroscopy and atomic force microscope. The analytical performance of proposed biosensor toward H₂O₂ was investigated by cyclic voltammetry and chronoamperometry. The resulted biosensor exhibited fast amperometric response (within 6 s) to H₂O₂, and linear range was from 9.1 μM to 5.0 mM with the detection limit of 2.6 μM (S/N = 3). The apparent Michaelis–Menten constant (K _M^app) was evaluated to be 3.2 mM. Furthermore, the resulted biosensor showed good stability and reproducibility.     

An amperometric uric acid biosensor based on multiwalled carbon nanotube-gold nanoparticle composite

An amperometric uric acid biosensor was fabricated by immobilizing uricase (EC 1.7.3.3) onto gold nanoparticle (AuNP)/multiwalled carbon nanotube (MWCNT) layer deposited on Au electrode via carbodiimide linkage. Determination of uric acid was performed by oxidation of enzymically generated H₂O₂ at 0.4 V. The sensor showed optimal response within 7 s at 40 °C in 50 mM Tris–HCl buffer (pH 7.5). The linear working range of the biosensor was 0.01–0.8 mM. The limit of detection (LOD) was 0.01 mM. The sensor measured uric acid levels in serum of healthy individuals and persons suffering from gout. The analytical recoveries of the added uric acid, 10 and 20 mg L^–1, were 98.0% and 96.5%, respectively. Within- and between-batch coefficients of variation were less than 5.6% and less than 4.7%, respectively. A good correlation (r = 0.998) was obtained between serum uric acid values by the standard enzymic colorimetric method and the current method. A number of serum substances had practically no interference. The sensor was used in more than 200 assays and had a storage life of 120 days at 4 °C.