The A-kinase-anchoring protein AKAP-Lbc facilitates cardioprotective PKA phosphorylation of Hsp20 on Ser16

BcChi-A, a GH19 chitinase from the moss Bryum coronatum, is an endo-acting enzyme that hydrolyses the glycosidic bonds of chitin, (GlcNAc)(n) [a β-1,4-linked polysaccharide of GlcNAc (N-acetylglucosamine) with a polymerization degree of n], through an inverting mechanism. When the wild-type enzyme was incubated with α-(GlcNAc)2-F [α-(GlcNAc)(2) fluoride] in the absence or presence of (GlcNAc)(2), (GlcNAc)(2) and hydrogen fluoride were found to be produced through the Hehre resynthesis-hydrolysis mechanism. To convert BcChi-A into a glycosynthase, we employed the strategy reported by Honda et al. [(2006) J. Biol. Chem. 281, 1426-1431; (2008) Glycobiology 18, 325-330] of mutating Ser(102), which holds a nucleophilic water molecule, and Glu(70), which acts as a catalytic base, producing S102A, S102C, S102D, S102G, S102H, S102T, E70G and E70Q. In all of the mutated enzymes, except S102T, hydrolytic activity towards (GlcNAc)(6) was not detected under the conditions we used. Among the inactive BcChi-A mutants, S102A, S102C, S102G and E70G were found to successfully synthesize (GlcNAc)(4) as a major product from α-(GlcNAc)(2)-F in the presence of (GlcNAc)(2). The S102A mutant showed the greatest glycosynthase activity owing to its enhanced F(-) releasing activity and its suppressed hydrolytic activity. This is the first report on a glycosynthase that employs amino sugar fluoride as a donor substrate.     

Effect of cellulose physical characteristics, especially the water sorption value, on the efficiency of its hydrolysis catalyzed by free or immobilized cellulase

Cellulase, an enzymatic complex that synergically promotes the degradation of cellulose to glucose and cellobiose, free or adsorbed onto Si/SiO₂ wafers at 60 °C has been employed as catalyst in the hydrolysis of microcrystalline cellulose (Avicel), microcrystalline cellulose pre-treated with hot phosphoric acid (CP), cotton cellulose (CC) and eucalyptus cellulose (EC). The physical characteristics such as index of crystallinity (I_C), degree of polymerization (DP) and water sorption values were determined for all samples. The largest conversion rates of cellulose into the above-mentioned products using free cellulase were observed for samples with the largest water sorption values; conversion rates showed no correlation with either I_C or DP of the biopolymer. Cellulose with large water sorption value possesses large pore volumes, hence higher accessibility. The catalytic efficiency of immobilized cellulase could not be correlated with the physical characteristics of cellulose samples. The hydrolysis rates of the same cellulose samples with immobilized cellulase were lower than those by the free enzyme, due to the diffusion barrier (biopolymer chains approaching to the immobilized enzyme) and less effective contact between the enzyme active site and its substrate. Immobilized cellulase, unlike its free counterpart, can be recycled at least six times without loss of catalytic activity, leading to higher overall cellulose conversion.     

A kinetic study of Trichoderma reesei Cel7B catalyzed cellulose hydrolysis

One prominent feature of Trichoderma reesei (Tr) endoglucanases catalyzed cellulose hydrolysis is that the reaction slows down quickly after it starts (within minutes). But the mechanism of the slowdown is not well understood. A structural model of Tr- Cel7B catalytic domain bound to cellulose was built computationally and the potentially important binding residues were identified and tested experimentally. The 13 tested mutants show different binding properties in the adsorption to phosphoric acid swollen cellulose and filter paper. Though the partitioning parameter to filter paper is about 10 times smaller than that to phosphoric acid swollen cellulose, a positive correlation is shown for two substrates. The kinetic studies show that the reactions slow down quickly for both substrates. This slowdown is not correlated to the binding constant but anticorrelated to the enzyme initial activity. The amount of reducing sugars released after 24 h by Cel7B in phosphoric acid swollen cellulose, Avicel and filter paper cellulose hydrolysis is correlated with the enzyme activity against a soluble substrate p-nitrophenyl lactoside. Six of the 13 tested mutants, including N47A, N52D, S99A, N323D, S324A, and S346A, yield ∼15–35% more reducing sugars than the wild type (WT) Cel7B in phosphoric acid swollen cellulose and filter paper hydrolysis. This study reveals that the slowdown of the reaction is not due to the binding of the enzyme to cellulose. The activity of Tr- Cel7B against the insoluble substrate cellulose is determined by the enzyme’s capability in hydrolyzing the soluble substrate.     

Covalent immobilization of a glucoamylase to bagasse dialdehyde cellulose

Cellulose fibres from bagasse were oxidized by sodium periodate in sulphuric acid media at positions 2 and 3 of the anhydroglucose unit to produce dialdehyde cellulose. The aldehyde groups of the dialdehyde cellulose were able to react with amino groups of a glucoamylase to form covalent bonds and result in a dialdehyde cellulose immobilized enzyme. The optimum pH of this immobilized enzyme and free enzyme were in the range of 3.0–5.0 and 3.5–5.0, respectively. The optimum temperature for both the free and immobilized enzymes was 60–65 °C. The relative remaining activity of the immobilized enzyme was 36% and its stability was very good, since it could be reused for over 30 cycles. Its activity decreased from the first to the seventh reuse cycles, due to the slow detachment of non-covalently bound enzyme. However, activity tended to stabilize after the seventh cycle of reuse, indicating very stable covalent binding between the enzyme and dialdehyde cellulose.     

Remarkable transglycosylation activity of glycosynthase mutants of endo-D, an endo-β-N-acetylglucosaminidase from Streptococcus pneumoniae

Endo-β-N-acetylglucosaminidase from Streptococcus pneumoniae (Endo-D) is an endoglycosidase capable of hydrolyzing the Fc N-glycan of intact IgG antibodies after sequential removal of the sialic acid, galactose, and internal GlcNAc residues in the N-glycan. Endo-D also possesses transglycosylation activity with sugar oxazoline as the donor substrate, but the transglycosylation yield is low due to enzymatic hydrolysis of the donor substrate and the product. We report here our study on the hydrolytic and transglycosylation activity of recombinant Endo-D and its selected mutants. We found that Endo-D preferred core-fucosylated N-glycan for hydrolysis but favored nonfucosylated GlcNAc acceptor for transglycosylation. Several mutants showed significantly enhanced transglycosylation efficiency over the wild type enzyme. Two mutants (N322Q and N322A) were identified as typical glycosynthases that demonstrated remarkable transglycosylation activity with only marginal or no product hydrolysis activity. Kinetic studies revealed that the N322Q [corrected]and N322A glycosynthases had much higher catalytic efficiency for glycosylating the nonfucosylated GlcNAc acceptor. In comparison, the N322Q was much more efficient than N322A for transglycosylation. However, N322Q and N322A [corrected] could not take more complex N-glycan oxazoline as substrate for transglycosylation, indicating their strict substrate specificity. The usefulness of the N322Q glycosynthase was exemplified by its application for efficient glycosylation remodeling of IgG-Fc domain.     

Development of a microbioreactor for glycoconjugate synthesis

A microbioreactor immobilized with a synthase-type mutant enzyme, Endo-M-N175Q (glycosynthase) of endo-β-N-acetylglucosaminidase derived from Mucor hiemalis (Endo-M), was constructed and used for glycoconjugate synthesis. The transglycosylation was performed with a reaction mixture containing an oxazoline derivative of sialo complex-type glycoside (SG), which was prepared from a sialo complex-type glycopeptide SGP derived from hen egg yolk, as a glycosyl donor and N-Fmoc-N-acetylglucosaminyl-l-asparagine [Fmoc-Asn(GlcNAc)-OH] as an acceptor. The reaction mixture was injected into a glycosynthase microbioreactor at a constant flow rate. Highly efficient and nearly stoichiometric transglycosylation occurred in the microbioreactor, and the transglycosylation product was eluted from the other end of the reactor. The glycosynthase microbioreactor was stable and could be used repeatedly for a long time.     

Structural Insights into the Affinity of Cel7A Carbohydrate-binding Module for Lignin

The high cost of hydrolytic enzymes impedes the commercial production of lignocellulosic biofuels. High enzyme loadings are required in part due to their non-productive adsorption to lignin, a major component of biomass. Despite numerous studies documenting cellulase adsorption to lignin, few attempts have been made to engineer enzymes to reduce lignin binding. In this work, we used alanine-scanning mutagenesis to elucidate the structural basis for the lignin affinity of Trichoderma reesei Cel7A carbohydrate binding module (CBM). T. reesei Cel7A CBM mutants were produced with a Talaromyces emersonii Cel7A catalytic domain and screened for their binding to cellulose and lignin. Mutation of aromatic and polar residues on the planar face of the CBM greatly decreased binding to both cellulose and lignin, supporting the hypothesis that the cellulose-binding face is also responsible for lignin affinity. Cellulose and lignin affinity of the 31 mutants were highly correlated, although several mutants displayed selective reductions in lignin or cellulose affinity. Four mutants with increased cellulose selectivity (Q2A, H4A, V18A, and P30A) did not exhibit improved hydrolysis of cellulose in the presence of lignin. Further reduction in lignin affinity while maintaining a high level of cellulose affinity is thus necessary to generate an enzyme with improved hydrolysis capability. This work provides insights into the structural underpinnings of lignin affinity, identifies residues amenable to mutation without compromising cellulose affinity, and informs engineering strategies for family one CBMs.     

Insights into substrate recognition and specificity for IgG by Endoglycosidase S2

Antibodies bind foreign antigens with high affinity and specificity leading to their neutralization and/or clearance by the immune system. The conserved N-glycan on IgG has significant impact on antibody effector function, with the endoglycosidases of Streptococcus pyogenes deglycosylating the IgG to evade the immune system, a process catalyzed by the endoglycosidase EndoS2. Studies have shown that two of the four domains of EndoS2, the carbohydrate binding module (CBM) and the glycoside hydrolase (GH) domain are critical for catalytic activity. To yield structural insights into contributions of the CBM and the GH domains as well as the overall flexibility of EndoS2 to the proteins’ catalytic activity, models of EndoS2-Fc complexes were generated through enhanced-sampling molecular-dynamics (MD) simulations and site-identification by ligand competitive saturation (SILCS) docking followed by reconstruction and multi-microsecond MD simulations. Modeling results predict that EndoS2 initially interacts with the IgG through its CBM followed by interactions with the GH yielding catalytically competent states. These may involve the CBM and GH of EndoS2 simultaneously interacting with either the same Fc CH2/CH3 domain or individually with the two Fc CH2/CH3 domains, with EndoS2 predicted to assume closed conformations in the former case and open conformations in the latter. Apo EndoS2 is predicted to sample both the open and closed states, suggesting that either complex can directly form following initial IgG-EndoS2 encounter. Interactions of the CBM and GH domains with the IgG are predicted to occur through both its glycan and protein regions. Simulations also predict that the Fc glycan can directly transfer from the CBM to the GH, facilitating formation of catalytically competent complexes and how the 734 to 751 loop on the CBM can facilitate extraction of the glycan away from the Fc CH2/CH3 domain. The predicted models are compared and consistent with Hydrogen/Deuterium Exchange data. In addition, the complex models are consistent with the high specificity of EndoS2 for the glycans on IgG supporting the validity of the predicted models.     

Exchange of active site residues alters substrate specificity in extremely thermostable β-glycosidase from Thermococcus kodakarensis KOD1

β-Glycosidase from Thermococcus kodakarensis KOD1 is a hyperthermophilic enzyme with β-glucosidase, β-mannosidase, β-fucosidase and β-galactosidase activities. Sequence alignment with other β-glycosidases from hyperthermophilic archaea showed two unique active site residues, Gln77 and Asp206. These residues were represented by Arg and Asp in all other hyperthermophilic β-glycosidases. The two active site residues were mutated to Q77R, D206N and D206Q, to study the role of these unique active site residues in catalytic activity and to alter the substrate specificity to enhance its β-glucosidase activity. The secondary structure analysis of all the mutants showed no change in their structure and exhibited in similar conformation like wild-type as they all existed in dimer form in an SDS-PAGE under non-reducing conditions. Q77R and D206Q affected the catalytic activity of the enzyme whereas the D206N altered the catalytic turn-over rate for glucosidase and mannosidase activities with fucosidase activity remain unchanged. Gln77 is reported to interact with catalytic nucleophile and Asp206 with axial C2-hydroxyl group of substrates. Q77R might have made some changes in three dimensional structure due to its electrostatic effect and lost its catalytic activity. The extended side chains of D206Q is predicted to affect the substrate binding during catalysis. The high-catalytic turn-over rate by D206N for β-glucosidase activity makes it a useful enzyme in cellulose degradation at high temperatures.     

Effects of active site cleft residues on oligosaccharide binding,hydrolysis, and glycosynthase activities of rice BGlu1 and its mutants

Rice BGlu1 (Os3BGlu7) is a glycoside hydrolase family 1 β‐glucosidase that hydrolyzes cellooligosaccharides with increasing efficiency as the degree of polymerization (DP) increases from 2 to 6, indicating six subsites for glucosyl residue binding. Five subsites have been identified in X‐ray crystal structures of cellooligosaccharide complexes with its E176Q acid‐base and E386G nucleophile mutants. X‐ray crystal structures indicate that cellotetraose binds in a similar mode in BGlu1 E176Q and E386G, but in a different mode in the BGlu1 E386G/Y341A variant, in which glucosyl residue 4 (Glc4) interacts with Q187 instead of the eliminated phenolic group of Y341. Here, we found that the Q187A mutation has little effect on BGlu1 cellooligosaccharide hydrolysis activity or oligosaccharide binding in BGlu1 E176Q, and only slight effects on BGlu1 E386G glycosynthase activity. X‐ray crystal structures showed that cellotetraose binds in a different position in BGlu1 E176Q/Y341A, in which it interacts directly with R178 and W337, and the Q187A mutation had little effect on cellotetraose binding. Mutations of R178 and W337 to A had significant and nonadditive effects on oligosaccharide hydrolysis by BGlu1, pNPGlc cleavage and cellooligosaccharide inhibition of BGlu1 E176Q and BGlu1 E386G glycosynthase activity. Hydrolysis activity was partially rescued by Y341 for longer substrates, suggesting stacking of Glc4 on Y341 stabilizes binding of cellooligosaccharides in the optimal position for hydrolysis. This analysis indicates that complex interactions between active site cleft residues modulate substrate binding and hydrolysis.     

Human IgG/FcγR Interactions Are Modulated by Streptococcal IgG Glycan Hydrolysis

Background

The human pathogen Streptococcus pyogenes produces an endoglycosidase, EndoS that hydrolyzes the chitobiose core of the asparagine-linked glycan on the heavy chain of human IgG. IgG-binding to Fc gamma receptors (FcγR) on leukocytes triggers effector functions including phagocytosis, oxidative burst and the release of inflammatory mediators. The interactions between FcγR and the Fc domain of IgG depend on the IgG glycosylation state.

Methodology/Principal Findings

Here we show for the first time that EndoS hydrolyzes the heavy chain glycan of all four human IgG subclasses (IgG1-4), in purified form and in a plasma environment. An inactive form of EndoS, obtained by site-directed mutagenesis, binds IgG with high affinity, in contrast to wild type EndoS that only transiently interacts with IgG, as shown by Slot-blotting and surface plasmon resonance technology. Furthermore, EndoS hydrolysis of the IgG glycan influences the binding of IgG to immobilized soluble FcγR and to an erythroleukemic cell line, K562, expressing FcγRIIa. Incubation of whole blood with EndoS results in a dramatic decrease of IgG binding to activated monocytes as analyzed by flow cytometry. Moreover, the IgG bound to K562 cells dissociates when cells are treated with EndoS. Likewise, IgG bound to immobilized FcγRIIa and subsequently treated with EndoS, dissociates from the receptor as analyzed by surface plasmon resonance and Western blot.

Conclusions/Significance

We provide novel information about bacterial enzymatic modulation of the IgG/FcγR interaction that emphasizes the importance of glycosylation for antibody effector functions. Moreover, EndoS could be used as a biochemical tool for specific IgG N-glycan hydrolysis and IgG purification/detection, or as a potential immunosuppressing agent for treatment of antibody-mediated pathological processes.     

Improving the Activity and Stability of GL-7-ACA Acylase CA130 by Site-Directed Mutagenesis

In the present study, glutaryl-7-amino cephalosporanic acid acylase from Pseudomonas sp. strain 130 (CA130) was mutated to improve its enzymatic activity and stability. Based on the crystal structure of CA130, two series of amino acid residues, one from those directly involved in catalytic function and another from those putatively involved in surface charge, were selected as targets for site-directed mutagenesis. In the first series of experiments, several key residues in the substrate-binding pocket were substituted, and the genes were expressed in Escherichia coli for activity screening. Two of the mutants constructed, Y151αF and Q50βN, showed two- to threefold-increased catalytic efficiency (k_cat/K_m) compared to wild-type CA130. Their K_m values were decreased by ca. 50%, and the k_cat values increased to 14.4 and 16.9 s⁻¹, respectively. The ability of these mutants to hydrolyze adipoyl 6-amino penicillinic acid was also improved. In the second series of mutagenesis, several mutants with enhanced stabilities were identified. Among them, R121βA and K198βA had a 30 to 58% longer half-life than wild-type CA130, and K198βA and D286βA showed an alkaline shift of optimal pH by about 1.0 to 2.0 pH units. To construct an engineered enzyme with the properties of both increased activity and stability, the double mutant Q50βN/K198βA was expressed. This enzyme was purified and immobilized for catalytic analysis. The immobilized mutant enzyme showed a 34.2% increase in specific activity compared to the immobilized wild-type CA130.     

Identification of Pyrococcus furiosus amylopullulanase catalytic residues

Pyrococcus furiosus amylopullulanase (PfAPU) belongs to glycosyl hydrolase family 57. Using sequence alignments of the known family 57 enzymes and site-directed mutagenesis, E291, D394, and E396 were identified as PfAPU putative catalytic residues. The apparent catalytic efficiencies (k_cat/K_m) of PfAPU mutants E291Q and D394N on pullulan were 123.0 and 24.4 times lower, respectively, than that of PfAPU. The activity of mutant E396Q on pullulan was too low to allow reliable determination of its catalytic efficiency. The apparent specific activities of these enzymes on starch also decreased 91.0 times (E291Q), 11.7 times (D394N), and 37.2 times (E396Q). The hydrolytic patterns for pullulan and starch were the same, while the hydrolysis rates differed as reported. Based on sequence alignment and a previous report, E291 is proposed as the catalytic nucleophile.     

Immobilized enzymes – valuable tools for the indication of temperature events

Abstract

The enzymes trypsin and urease were covalently tethered to cellulose to utilize their ability to produce colored products as a consequence of enzymatic activity. Therefore, cellulose had to be chemically modified first in order to generate appropriate chemical functionalities. Different approaches including periodate supported oxidation followed by immobilization via reductive amination, insertion of a reactive polymer interface, and cross-linking inside the cellulose matrix were utilized for the immobilization. The success of immobilization was assessed by the quantification of surface-bound protein as well as by recording of enzymatic activities under different conditions. The enzymatic activity of trypsin and urease was maintained best when a hydrophilic intermediate polymer layer was used for immobilization. The applicability of immobilized enzymes as temperature indicators was demonstrated using cross-linked urease.     

The first glycosynthase derived from an inverting glycoside hydrolase

Reducing end xylose-releasing exooligoxylanase (Rex, EC 3.2.1.156) is an inverting GH that hydrolyzes xylooligosaccharides (> or = X3) to release X1 at their reducing end. The wild-type enzyme exhibited the Hehre resynthesis hydrolysis mechanism, in which alpha-X2F was hydrolyzed to X2 and HF in the presence of X1 as an acceptor molecule. However, the transglycosidation product (X3) was not detectable in the reaction. To convert reducing end xylose-releasing exooligoxylanase to glycosynthase, derivatives with mutations in the catalytic base (Asp-263) were constructed by saturation random mutagenesis. Nine amino acid residue mutants (Asp-263 to Gly, Ala, Val, Thr, Leu, Asn, Cys, Pro, or Ser) were found to possess glycosynthase activity forming X3 from alpha-X2F and X1. Among them, D263C showed the highest level of X3 production, and D263N exhibited the fastest consumption of alpha-X2F. The D263C mutant showed 10-fold lower hydrolytic activity than D263N, resulting in the highest yield of X3. X2 was formed from the early stage of the reaction of the D263C mutant, indicating that a portion of the X3 formed by condensation was hydrolyzed before its release from the enzyme. To acquire glycosynthase activity from inverting enzymes, it is important to minimize the decrease in F(-)-releasing activity while maximizing the decrease in the hydrolytic activity. The present study expands the possibility of conversion of glycosynthases from inverting enzymes.     

Improving the activity and stability of GL-7-ACA acylase CA130 by site-directed mutagenesis

In the present study, glutaryl-7-amino cephalosporanic acid acylase from Pseudomonas sp. strain 130 (CA130) was mutated to improve its enzymatic activity and stability. Based on the crystal structure of CA130, two series of amino acid residues, one from those directly involved in catalytic function and another from those putatively involved in surface charge, were selected as targets for site-directed mutagenesis. In the first series of experiments, several key residues in the substrate-binding pocket were substituted, and the genes were expressed in Escherichia coli for activity screening. Two of the mutants constructed, Y151alphaF and Q50betaN, showed two- to threefold-increased catalytic efficiency (k(cat)/K(m)) compared to wild-type CA130. Their K(m) values were decreased by ca. 50%, and the k(cat) values increased to 14.4 and 16.9 s(-1), respectively. The ability of these mutants to hydrolyze adipoyl 6-amino penicillinic acid was also improved. In the second series of mutagenesis, several mutants with enhanced stabilities were identified. Among them, R121betaA and K198betaA had a 30 to 58% longer half-life than wild-type CA130, and K198betaA and D286betaA showed an alkaline shift of optimal pH by about 1.0 to 2.0 pH units. To construct an engineered enzyme with the properties of both increased activity and stability, the double mutant Q50betaN/K198betaA was expressed. This enzyme was purified and immobilized for catalytic analysis. The immobilized mutant enzyme showed a 34.2% increase in specific activity compared to the immobilized wild-type CA130.     

Glycosynthase reaction meets the flow: Continuous synthesis of lacto-N-triose II by engineered β-hexosaminidase immobilized on solid support

The D746E variant of Bifidobacterium bifidum β-N-acetyl-hexosaminidase is a promising glycosynthase (engineered glycosidase deficient in hydrolase activity) for the synthesis of lacto-N-triose II (LNT II), a core structural unit of human milk oligosaccharides. Here, we develop a flow process for the glycosynthase reaction, which is the regioselective β-1,3-glycosylation of lactose from a d -glucosamine 1,2-oxazoline donor. Using the glycosynthase immobilized on agarose beads (∼30 mg/g) packed into a fixed bed (1 ml), we show stable continuous production of LNT II (145–200 mM) at quantitative yield from the donor substrate. The wild-type β-N-acetyl-hexosaminidase used under exactly comparable conditions gives primarily (∼85%) the hydrolysis product d -glucosamine. By enabling short residence times (2 min) that are challenging for mixed-vessel types of reactor to establish, the glycosynthase flow reactor succeeds in an effective uncoupling of the LNT II formation (∼80–100 mM/min) from the slower side reactions (decomposition of donor substrate, enzymatic hydrolysis of LNT II) to obtain optimum synthetic efficiency. Our study thus provides a strong case for the application of flow chemistry principles to glycosynthase reactions and by that, it reveals the important synergy between enzyme and reaction engineering for biocatalytic synthesis of oligosaccharides.     

Biodegradation of microcrystalline cellulose in pH–pH recyclable aqueous two-phase systems with water-soluble immobilized cellulase

Product inhibition is a barrier for enzymatic conversion of cellulose into reducing sugar in single aqueous phase. In addition, the difficulty in the recovery of cellulase also leads to high cost for the enzymatic hydrolysis of cellulose. In this study, enzymatic degradation of cellulose was carried out in pH–pH recyclable aqueous two-phase systems (ATPS) composed by copolymers poly (AA-co-DMAEMA-co-BMA) (abbreviated P_ADB3.8) and poly (MAA-co-DMAEMA-co-BMA) (abbreviated P_MDB). In the systems, cellulase was immobilized on pH-response copolymer P_MDB by using 1-Ethyl-3-(3-dimethyllaminopropyl)-carbodiimide hydrochloride (EDC) as cross-linker. Optimized partition coefficient of product in the systems was 2.45, in the presence of 40 mM (NH₄)₂SO₄. Insoluble substrate and immobilized enzyme were biased to bottom phase, while the product was partitioned to top phase. Microcrystalline cellulose was hydrolyzed into reducing sugar, and the product entered into top phase. The yield of saccharification in ATPS could reach 70.57% at the initial substrate concentration of 0.5% (w/v), and the value was 9.3% higher than that in the single aqueous phase. Saccharification yield could reach 66.15% after immobilized cellulase was recycled five times in ATPS.     

Characterization of glycosynthase mutants derived from glycoside hydrolase family 10 xylanases

Four xylanases belonging to glycoside hydrolase family 10-Thermotoga maritima XylB (TM), Clostridium stercorarium XynB (CS), Bacillus halodurans XynA (BH), and Cellulomonas fimi Cex (CF)-were converted to glycosynthases by substituting the nucleophilic glutamic acid residues with glycine, alanine, and serine. The glycine mutants exhibited the highest levels of glycosynthase activity with all four enzymes. All the glycine mutants formed polymeric beta-1,4-linked xylopyranose as a precipitate during reaction with alpha-xylobiosyl fluoride. Two glycine mutants (TM and CF) recognized X(2) as an effective acceptor molecule to prohibit the formation of the polymer, while the other two (CS and BH) did not. The difference in acceptor specificity is considered to reflect the difference in substrate affinity at their +2 subsites. The results agreed with the structural predictions of the subsite, where TM and CF exhibit high affinity at subsite 2, suggesting that the glycosynthase technique is useful for investigating the affinity of +subsites.     

Fragments of Bacterial Endoglycosidase S and Immunoglobulin G Reveal Subdomains of Each That Contribute to Deglycosylation

Endoglycosidase S (EndoS) is a glycoside-hydrolase secreted by the bacterium Streptococcus pyogenes. EndoS preferentially hydrolyzes the N-linked glycans from the Fc region of IgG during infection. This hydrolysis impedes Fc functionality and contributes to the immune evasion strategy of S. pyogenes. Here, we investigate the mechanism of human serum IgG deactivation by EndoS. We expressed fragments of IgG1 and demonstrated that EndoS was catalytically active against all of them including the isolated CH2 domain of the Fc domain. Similarly, we sought to investigate which domains within EndoS could contribute to activity. Bioinformatics analysis of the domain organization of EndoS confirmed the previous predictions of a chitinase domain and leucine-rich repeat but also revealed a putative carbohydrate binding module (CBM) followed by a C-terminal region. Using expressed fragments of EndoS, circular dichroism of the isolated CBM, and a CBM-C-terminal region fusion revealed folded domains dominated by β sheet and α helical structure, respectively. Nuclear magnetic resonance analysis of the CBM with monosaccharides was suggestive of carbohydrate binding functionality. Functional analysis of truncations of EndoS revealed that, whereas the C-terminal of EndoS is dispensable for activity, its deletion impedes the hydrolysis of IgG glycans.