Preparation and application of poly(N,N-dimethylacrylamide-co-acrylamide) and poly(N-isopropylacrylamide-co-acrylamide)/kappa-Carrageenan hydrogels for immobilization of lipase

In the present of this study, two novel polymeric matrixes that are poly(N,N-dimethylacrylamide-co-acrylamide) and poly(N-isopropylacrylamide-co-acrylamide)/kappa-Carrageenan was synthesized and applied for immobilization of lipase. For the immobilization of enzyme, two different immobilization procedures have been carried out via covalently binding and entrapment methods. On the free and immobilized enzymes activities, optimum pH, temperature, storage and thermal stability was investigated. The optimum temperature for free, covalently immobilized and entrapped enzymes was found to be 30, 35 and 30 degrees C, respectively. Optimum pH for both free and immobilized enzymes was also observed at pH 8. Maximum reaction rate (Vmax) and Michaelis-Menten constant (Km) were determined for free and immobilized lipases. Furthermore, the reuse numbers of immobilized enzymes also studied. It was observed that after 40th use in 5 days, the retained activities for covalently immobilized and entrapped lipases were found as 39% and 22%, respectively. Storage and thermal stability of enzyme was also increased by as a result of immobilization procedures.     

Use of chemically modified PMMA microspheres for enzyme immobilization

Modified poly(methyl methacrylate) (PMMA) microspheres, about 7microm in diameter, carrying aldehyde groups on their surfaces were synthesized and used as the support for enzyme immobilization. The immobilizing behavior as well as the properties of immobilized enzyme was studied. The amount of bound enzyme can be extended to 76.8mg g(-1) support, which is relatively much higher than other supports. The kinetic investigation derived from three typical models shows that the practical process is more complicated than the ideal condition, with one or more interactions being involved in the immobilization process. The K(m) value is actually larger and V(max) is smaller in the immobilized form than those in the free form. The increased resistance of the immobilized enzyme against the changes of temperature indicates that immobilizing enzyme onto the modified microspheres is useful for enzyme immobilization.     

Immobilization of Amaranthus leaf oxalate oxidase on alkylamine glass

A membrane bound oxalate oxidase from leaves of Amaranthus spionsus has been partially purified and immobilized on alkylamine glass with a yield of 9.2 mg protein/g support. The enzyme retained 99.4% of initial activity of free enzyme after immobilization. There was no change in the optimum pH (3.5) and Vmax but the temperature for maximum activity was slightly decreased (35 degrees C) and energy of activation (Ea) and Km for oxalate were increased after immobilization. The immobilized enzyme preparation was stable for 6 months, when stored in distilled water at 4 degrees C. Presence of Cl- did not affect the activity of immobilized enzyme.     

Some properties of free and immobilized alpha-amylase from Penicillium griseofulvum by solid state fermentation

Alpha-amylase was produced from Penicillium griseofulvum by an SSF technique. Alpha-amylase was immobilized on Celite by an adsorption method. Various parameters, such as effect of pH and temperature, substrate concentration, operational and storage stability, ability to hydrolyze starch and products of hydrolysis were investigated; these findings were compared with the free enzyme. The activity yield of immobilization was 87.6%. The optimum pH and temperature for both enzymes were 5.5 degrees C and 40 degrees C, respectively. The thermal, and the operational and storage stabilities of immobilized enzyme were better than that of the free enzyme. Km and Vmax were calculated from Lineweaver-Burk plots for both enzymes. Km values were 9.1 mg mL(-1) for free enzyme, and 7.1 mg mL(-1) for immobilized enzyme. The Vmax of the immobilized enzyme was approximately 40% smaller than that of the free enzyme. The hydrolysis ability of the free and immobilized enzyme were determined as 99.3% and 97.9%, respectively. Hydrolysis products of the a-amylase from P. griseofulvum were maltose, unidentified oligosaccharides, and glucose.     

漆酶在磁性壳聚糖微球上的固定及其酶学性质研究

以磁性壳聚糖微球为载体,戊二醛为交联剂,共价结合制备固定化漆酶。探讨了漆酶固定化的影响因素,并对固定化漆酶的性质进行了研究。确定漆酶固定化适宜条件为：50 mg磁性壳聚糖微球,加入10mL 0.8mg/mL 漆酶磷酸盐缓冲液（0.1mol/L,pH 7.0）,在4℃固定2h。固定化酶最适pH为3.0, 最适温度分别为10℃和55℃,均比游离酶降低5℃。在pH 3.0,温度37℃时,固定化酶对ABTS的表观米氏常数为171.1μmol/L。与游离酶相比,该固定化漆酶热稳定性明显提高,并具有良好的操作和存储稳定性。     

Preparation and characterization of kappa-carrageenan immobilized urease

Urease was encapsulated within kappa-carrageenan beads. Various parameters, such as amount of kappa-carrageenan and enzyme activity, were optimized for the immobilization of urease. Immobilized urease was thoroughly characterized for pH, temperature, and storage stabilities and these properties were compared with the free enzyme. The free urease activity quickly decreased and the half time of the activity decay was about 3 days at 4 degrees C. The immobilized urease remained very active over a long period of time and this enzyme lost about 70.43% of its orginal activity over the period of 26 days for storage at 4 degrees C. The Michaelis constant (Km) and maximum reaction velocity (Vmax) were calculated from Lineweaver-Burk plots for both free and immobilized enzyme systems. Vmax = 227.3 U/mg protein, Km = 65.6 mM for free urease and Vmax = 153.9 U/mg protein, Km = 96.42 mM for immobilized urease showed a moderate decrease of enzyme specific activity and change of substrate affinity.     

Binary immobilization of tyrosinase by using alginate gel beads and poly(acrylamide-co-acrylic acid) hydrogels

The use of the immobilized and the stable enzymes has immense potential in the enzymatic analysis of clinical, industrial and environmental samples. However, their widespread uses are limited due to the high cost of their production. In this study, binary immobilization of tyrosinase by using Ca-alginate and poly(acrylamide-co-acrylic acid) [P(AAm-co-AA)] was investigated. Maximum reaction rate (Vmax) and Michaelis-Menten constant (Km) were determined for the free and binary immobilized enzymes. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized tyrosinase were also examined. For the free and binary immobilized enzymes on Ca-alginate and P(AAm-co-AA), optimum pH was found to be 7 and 5, respectively. Optimum temperature of the free and immobilized enzymes was observed to be 30 and 35 degrees C, respectively. Reuse number, storage and thermal stability of the free tyrosinase were increased by a result of binary immobilization.     

Immobilization of glucose oxidase on silica-based supports

Glucose oxidase (beta-D-glucose: oxygen 1-oxidoreductase, EC 1.1.3.4) was covalently coupled to silica-based supports containing aldehyde functional groups. The activity of the immobilized enzyme was about 1000 U/g support. The optimum pH of the catalytic activity was 5.5 for the soluble enzyme and 6.0 for the immobilized enzyme. With glucose as a substrate the Km value of the immobilized enzyme was higher than in case of the soluble enzyme. The immobilized enzyme was found to be more thermostable than the soluble one. The immobilization did not affect the stability of glucose oxidase against the denaturing effect of urea.     

Polyaniline as a support for urease immobilization

Polyaniline synthesized by chemical oxidative polymerization was used as an immobilization support for jack bean urease. Such immobilized enzyme has a good catalytic activity, storage stability, and reusability. Properties of free and immobilized urease were compared. Blends of polystyrene, cellulose acetate and poly(methyl methacrylate) with polyaniline were used for urease immobilization as well.     

Preparation and properties of immobilized amyloglucosidase on nonporous PS/PNaSS microspheres

Nonporous polystyrene/poly(sodium styrene sulfonate) (PS/PNaSS) microspheres were used for immobilization of amyloglucosidase and the properties of immobilized enzyme was studied and compared with those of free enzyme. Sulfonated groups on the PS/PNaSS microspheres present a very simple, mild, and time-saving process for enzyme immobilization. Nonporous microspheres provide their surface for immobilization of enzyme and prevent the diffusion limitation problem in the pore. Despite the high concentration of bound enzyme the influence of immobilization on kinematic parameters, K(m) and V(max), is relatively low compare to other porous supports. Simple and time-saving immobilization procedure as well as the effects of pH and temperature on immobilized enzyme also showed that the PS/PNaSS microspheres could be good support.     

Immobilization of invertase onto poly(3-methylthienyl methacrylate)/poly(3-thiopheneacetic acid) matrix

A novel immobilization matrix, poly(3-methylthienyl methacrylate)–poly(3-thiopheneacetic acid) (PMTM–PTAA), was synthesized and used for the covalent immobilization of Saccharomyces cerevisiae invertase to produce invert sugar. The immobilization resulted in 87% immobilization efficiency. Optimum conditions for activity were not affected by immobilization and the optimum pH and temperature for both free and immobilized enzyme were found to be 4.5 and 55 °C, respectively. However, immobilized invertase was more stable at high pH and temperatures. The kinetic parameters for free and immobilized invertase were also determined using the Lineweaver–Burk plot. The K_m values were 35 and 38 mM for free and immobilized enzyme, respectively. The V_max values were 29 and 24 mg glucose/mg enzyme min for free and immobilized enzyme, respectively. Immobilized enzyme could be used for the production of glucose and fructose from sucrose since it retained almost all the initial activity for a month in storage and retained the whole activity in repeated 50 batch reactions.     

Optimization of urease immobilization onto non-porous HEMA incorporated poly(EGDMA) microbeads and estimation of kinetic parameters.

Jack bean urease (urea aminohydrolase, EC 3.5.1.5) was immobilized onto modified non-porous poly(ethylene glycol dimethacrylate/2-hydroxy ethylene methacrylate), (poly(EGDMA/HEMA)), microbeads prepared by suspension copolymerization for the potential use in hemoperfusion columns, not previously reported. The conditions of immobilization; enzyme concentration, medium pH, substrate and ethylene diamine tetra acetic acid (EDTA) presence in the immobilization medium in different concentrations, enzyme loading ratio, processing time and immobilization temperature were investigated for highest apparent activity. Immobilized enzyme retained 73% of its original activity for 75 days of repeated use with a deactivation constant kd = 3.72 x 10(-3) day(-1). A canned non-linear regression program was used to estimate the intrinsic kinetic parameters of immobilized enzyme with a low value of observable Thiele modulus (phi < 0.3) and these parameters were compared with those of free urease. The best-fit kinetic parameters of a Michaelis-Menten model were estimated as Vm = 3.318 x 10(-4) micromol/s mg bound enzyme protein, Km = 15.94 mM for immobilized, and Vm = 1.074 micromol NH3/s mg enzyme protein, Km = 14.49 mM for free urease. The drastic decrease in Vm value was attributed to steric effects, conformational changes in enzyme structure or denaturation of the enzyme during immobilization. Nevertheless, the change in Km value was insignificant for the unchanged affinity of the substrate with immobilization. For higher immobilized urease activity, smaller particle size and concentrated urease with higher specific activity could be used in the immobilization process.     

Studies on oxalate oxidase from beet stems upon immobilization on concanavalin A.

Oxalate oxidase (EC 1.2.3.4) was purified from beet stems and immobilized on concanavalin A. The bound enzyme showed a high resistance of denaturation and increased the storage stability at 4 degrees C. The immobilized oxidase showed a broad optimum at pH 3.5-5, compared to the free enzyme with a sharp optimum at pH 4.5. There was a 3-fold increase in the apparent Km value on immobilization. The lectin interaction also eliminated the inhibitory effect produced on the enzyme by azide, nitrate and glycollate. The stimulatory effect on the enzyme activity by the flavins was not seen with the bound enzyme. The interaction of oxidase on concanavalin A-Sepharose 4B column and its reversal with methyl alpha-D-mannoside, indicated the presence of polysaccharides. The glycoprotein nature was further confirmed by periodic acid-sciff staining procedure of the enzyme after gel electrophoresis.     

Development of an amperometric hypoxanthine biosensor for determination of hypoxanthine in fish and meat tissue

A hypoxanthine (Hx) biosensor based on immobilized xanthine oxidase (XO) as the bio-component was developed and studied for the rapid analysis of fish (sweet water and marine) and goat meat samples. The biosensor was standardized for the determination of Hx in the range of 0.05 to 2 mM. Crosslinking with glutaraldehyde in presence of BSA as a spacer molecule was used for the method of immobilization. One layer of gelatin (10%) was applied over the immobilized enzyme layer to reduce the leaching out of enzyme from the membrane (cellulose acetate) matrix. The optimum pH of the immobilized system was determined to be 8.5 at 25 degrees C instead 7.0-7.2 for free enzyme system. Km and Vmax values were determined for the immobilized system. The developed sensor was applied to determine the amount of Hx present in fish and meat over a period of time. The stability of the enzyme immobilized membrane was also tested over a period of 30 days.     

Glutaraldehyde activation of polymer Nylon-6 for lipase immobilization: enzyme characteristics and stability

An extracellular alkaline lipase of a thermo tolerant Bacillus coagulans BTS-3 was immobilized onto glutaraldehyde activated Nylon-6 by covalent binding. Under optimum conditions, the immobilization yielded a protein loading of 228 microg/g of Nylon-6. Immobilized enzyme showed maximum activity at a temperature of 55 degrees C and pH 7.5. The enzyme was stable between pH 7.5-9.5. It retained 88% of its original activity at 55 degrees C for 2h and also retained 85% of its original activity after eight cycles of hydrolysis of p-NPP. Kinetic parameters Km and Vmax were found to be 4mM and 10 micromol/min/ml, respectively. The influence of organic solvents on the catalytic activity of immobilized enzyme was also evaluated. The bound lipase showed enhanced activity when exposed to n-heptane. The substrate specificity of immobilized enzyme revealed more efficient hydrolysis of higher carbon length (C-16) ester than other ones.     

多聚半乳糖醛酸内切酶的固定化及其性质研究

棉花枯萎病菌多聚半乳糖醛酸内切酶在pH大于7时不稳定,故对它进行多种化学修饰而又不影响其活性,必须在pHd小于7的体系中进行。本文报道将PGAUase在还原剂存在下,与稀酸处理的Sepharose 4B交联,获得较高活力的固定化酶。固定化酶催化动力学表明,最适pH为4,4,最适温度为55℃,在pH1至8.0范围内稳定。和溶液酶比较,对热稳定性提高,但对碱稳定性下降。以多聚半乳糖醛酸为底物,Km为0.27mmol/L,Vmax为66.67nmol/L·min,均大于溶液酶(Km=0.07mmol/L,Vmax=28.00nmol/L·min)。在pH4.8,30℃,聚半乳糖醛酸在固相酶的柱中循环水解不同的时间降解产物经圆盘电泳和等电聚焦测定,得到不同大小的寡糖片段混合物,证明固相酶和溶液酶的作用方式相同,同时使以酶解法制备一定大小的有生物活性的寡糖分子成为可能。     

Tagatose production by immobilized recombinant Escherichia coli cells containing Geobacillus stearothermophilus l-arabinose isomerase mutant in a packed-bed bioreactor

Using immobilized recombinant Escherichia coli cells containing Geobacillus stearothermophilus l-arabinose isomerase mutant (Gali 152), we found that the galactose isomerization reaction was maximal at 70 degrees C and pH 7.0. Manganese ion enhanced galactose isomerization to tagatose. The immobilized cells were most stable at 60 degrees C and pH 7.0. The cell and substrate concentrations and dilution rate were optimal at 34 g/L, 300 g/L, and 0.05 h(-1), respectively. Under the optimum conditions, the immobilized cell reactor with Mn2+ produced an average of 59 g/L tagatose with a productivity of 2.9 g/L.h and a conversion yield of 19.5% for the first 20 days. The operational stability of immobilized cells with Mn2+ was demonstrated, and their half-life for tagatose production was 34 days. Tagatose production was compared for free and immobilized enzymes and free and immobilized cells using the same mass of cells. Immobilized cells produced the highest tagatose concentration, indicating that cell immobilization was more efficient for tagatose production than enzyme immobilization.     

壳聚糖固定化琼脂酶的研究

采用壳聚糖微球对琼脂酶进行固定化,在单因素实验的基础上用正交试验法确定最佳固定化工艺。结果表明:在戊二醛体积分数为2.5%,交联时间为6 h,加酶量为15 mL,固定时间为3 h时固定酶的活力最高;固定化酶的最适反应温度及最适pH分别为50℃和8.5,高于游离酶;同时其热稳定性及操作稳定性均高于游离酶。     

Immobilization of lactate dehydrogenase on polyacrylamide beads

Pig muscle lactate dehydrogenase (L-lactate:NAD oxidoreductase, EC 1.1.1.27) was covalently immobilized on polyacrylamide beads containing carboxylic functional groups activated by water-soluble carbodiimide. The effects of immobilization on the catalytic properties and stability of the lactate dehydrogenase were studied. There was no shift in the pH optimum of the immobilized enzyme compared to that of the soluble one. The apparent optimum temperature of the soluble enzyme was 65 degrees C, while that of the immobilized enzyme was between 50 and 65 degrees C. The apparent Km values of the immobilized enzyme with pyruvate and NADH substrates were higher than those of the soluble enzyme. As a result of immobilization, enhanced stabilities were found against heat treatment, changes in pH, and urea denaturation.     

Glucoamylase immobilization on silochrome using gossypol

The paper is concerned with conditions of glucoamylase binding with silanized silochrome using gossypol, dialdehyde isolated from cotton-plant. Kinetic properties of the immobilized enzyme are studied. The enzyme pH optimum does not change with immobilization and the temperature optimum is shifted from 50 degrees to 60 degrees C; a certain increase of the seeming Km is also observed. A high yield of the enzyme activity in immobilization evidences for the possibility of using gossypol as a binding agent in glucoamylase immobilization.