Use of tagged random hexamer amplification (TRHA) to clone and sequence minute quantities of DNA--application to a 180 kb plasmid isolated from Sphingomonas F199.

We have developed a novel method to clone and sequence minute quantities of DNA. The method was applied to sequence a 180 kb plasmid pNL1. The first step was the production of a size distributed population of DNA molecules that were derived from the 180 kb plasmid pNL1. The first step was accomplished by a random synthesis reaction using Klenow fragment and random hexamers tagged with a T7 primer at the primer 5'-end (T7-dN6, 5'-GTAATACGACTCACTATAGGGCNNNNNN-3'. In the second step, Klenow-synthesized molecules were amplified by PCR using T7 primer (5'-GTAATACGACTCACTATAGGGC-3'). With a hundred nanograms starting plasmid DNA from pNL1, we were able to generate Klenow-synthesized molecules with sizes ranging from 28 bp to >23 kb which were detectable on an agarose gel. The Klenow-synthesized molecules were then used as templates for standard PCR with T7 primer. PCR products of sizes ranging from 0.3 to 1.3 kb were obtained for cloning and sequencing. From the same Klenow-synthesized molecules, we were also able to generate PCR products with sizes up to 23 kb by long range PCR. A total 232.5 kb sequences were obtained from 593 plasmid clones and over twenty putative genes were identified. Sequences from these 593 clones were assembled into 62 contigs and 99 individual sequence fragments with a total unique sequence of 86.3 kb.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

Detection of mitochondrial single nucleotide polymorphisms using a primer elongation reaction on oligonucleotide microarrays

We have developed a novel allele-specific primer elongation protocol using a DNA polymerase on oligonucleotide chips. Oligonucleotide primers carrying polymorphic sites at their free 3'end were covalently bound to glass slides. The generation of single-stranded targets of genomic DNA containing single nuclotide polymorphisms (SNPs) to be typed was achieved by an asymmetric PCR reaction or exonuclease treatment of phosphothioate (PTO)-modified PCR products. In the presence of DNA polymerase and all four dNTPs, with Cy3-dUTP replacing dTTP, allele-specific extension of the immobilized primers took place along a stretch of target DNA sequence. The yield of elongated products was increased by repeated reaction cycles. We performed multiplexed assays with many small DNA targets, or used single targets of up to 4.4 kb mitochondrial DNA (mtDNA) sequence to detect multiple SNPs in one reaction. The latter approach greatly simplifies preamplification of SNP-containing regions, thereby providing a framework for typing hundreds of mtDNA polymorphisms.     

Molecular Characterization of Aster Yellows Phytoplasma Associated with Valerian and Sowthistle Plants by PCR–RFLP Analyses

In Alberta, Canada, valerian grown for medicinal purposes and sowthistle, a common weed, showed typical aster yellows symptoms. Molecular diagnosis was made using a universal primer pair (P1 / P7) designed to amplify the entire 16S rRNA gene and the 16 / 23S intergenic spacer region in a direct polymerase chain reaction (PCR) assay. This primer pair amplified the DNA samples from valerian and sowthistle and reference controls (AY‐27, CP, PWB, AY of canola, LWB). They produced the expected PCR products of 1.8 kb, which were diluted and used as templates in a nested PCR. Two primer pairs R16F2n / R2 and P3 / P7 amplified the DNA templates giving PCR products of 1.2 and 0.32 kb, respectively. No PCR product was obtained with either set of primers and DNA isolated from healthy plants. Restriction fragment length polymorphism (RFLP) was used to analyse the partial 16S rDNA sequences (1.2 kb) of all phytoplasma DNA samples after restriction with four endonucleases (AluI, HhaI, MseI and RsaI). The restriction patterns of these strains were found to be identical with the RFLP pattern of the AY phytoplasma reference control (AY‐27 strain). Based on the RFLP data, the two strains are members of subgroup A of the AY 16Sr1 group. We report here the first molecular study on the association of AY phytoplasmas with valerian and sowthistle plants.     

Primer design versus PCR bias in methylation independent PCR amplifications

Many protocols in methylation studies utilize one primer set to generate a PCR product from bisulfite modified template regardless of its methylation status (methylation independent amplification MIP). However, proportional amplification of methylated and unmethylated alleles is hard to achieve due to PCR bias favoring amplification of unmethylated relatively GC poor sequence. Two primer design systems have been proposed to overcome PCR bias in methylation independent amplifications. The first advises against including any CpG dinucleoteides into the primer sequence (CpG-free primers) and the second, recently published by us, is based on inclusion of a limited number of CpG sites into the primer sequence. Here we used the Methylation Sensitive High Resolution Melting (MS-HRM) technology to investigate the ability of primers designed according to both of the above mentioned primer design systems to proportionally amplify methylated and unmethylated templates. Ten “CpG-free” primer pairs and twenty primers containing limited number of CpGs were tested. In reconstruction experiments the “CpG-free” primers showed primer specific sensitivity and allowed us to detect methylation levels in the range from 5 to 50%. Whereas while using primers containing limited number of CpG sites we were able to consistently detect 1–0.1% methylation levels and effectively control PCR amplification bias. In conclusion, the primers with limited number of CpG sites are able to effectively reverse PCR bias and therefore detect methylated templates with significantly higher sensitivity than CpG free primers.     

One-pot fusion polymerase chain reaction for combinatorial synthesis of DNA from several cassettes

The fusion of DNA fragments is becoming increasingly more important. The ability to work without being constrained by restriction sites enables DNA fusion to be applied to a much broader range of fragments. Therefore, we describe a simplified polymerase chain reaction (PCR)-based method for fusion of DNA fragments in one step. In a single PCR, two templates, an overlapping primer, and template-specific forward and reverse primers are used. After a few cycles, the fusion DNA is assembled and is amplified. The ratio of overlapping primer to forward/reverse primers and template DNA is essential for the success of the reaction.     

PCR-Based Approach for Sequencing Mitochondrial Genomes of Decapod Crustaceans,with a Practical Example from Kuruma Prawn (<Emphasis Type="Italic">Marsupenaeus japonicus</Emphasis>)

An approach for sequencing the entire mitochondrial genomes (mitogenomes) of decapod crustaceans using 79 newly designed and 7 published polymerase chain reaction (PCR) primers is described. The approach comprises the following steps: (1) the entire mitogenome is amplified in 2 or 3 long PCRs; (2) the 86 primers are used in different combinations to amplify contiguous, overlapping short segments of the entire mitogenome with the diluted long PCR products as templates; (3) direct cycle sequencing is conducted using the short PCR products. This strategy allows a more rapid determination of decapod mitogenomic sequences than a traditional method using cloned mitochondrial DNA and primer walking strategy. As a practical example, the mitogenomic sequence for a kuruma prawn Marsupenaeus japonicus (Crustacea: Decapoda), was determined using the PCR-based approach.     

The Small Subunit Ribosomal RNA Gene Sequence of Pleistophora anguillarum and The Use of PCR Primers for Diagnostic Detection of the Parasite

Using the polymerase chain reaction (PCR) and two primers for conserved regions of the small subunit ribosomal RNA (SSU-rRNA.) of Microsporidia, a DNA segment about 1,195 base pairs long was amplified from a DNA template prepared from purified spores of the microsporidian species Pleistophora anguillarum. These spores had been isolated from adult eels ( Anguilla japonica ) with "Beko Disease." A comparison of sequence data from other microsporidian species showed P. anguillarum SSU-rRNA to be most similar to Vavraia oncoperae. When juvenile eels were artificially infected with P. anguillarum , enzyme-linked immunosorbent assay could detect a positive infection only 12 days post-infection. However, when suitable PCR primers were used, a DNA fragment of about 0.8 kb was detected from these juvenile eels after only 3 days post-infection. No PCR product was obtained with templates prepared from clinically healthy control animals.     

RNA: a method to specifically inhibit PCR amplification of known members of a multigene family by degenerate primers

The polymerase chain reaction (PCR) is a versatile method to amplify specific DNA with oligonucleotide primers. By designing degenerate PCR primers based on amino acid sequences that are highly conserved among all known gene family members, new members of a multigene family can be identified. The inherent weakness of this approach is that the degenerate primers will amplify previously identified, in addition to new, family members. To specifically address this problem, we synthesized a specific RNA for each known family member so that it hybridized to one strand of the template, adjacent to the 3′-end of the primer, allowing the degenerate primer to bind yet preventing extension by DNA polymerase. To test our strategy, we used known members of the soluble, nitric oxide-sensitive guanylyl cyclase family as our templates and degenerate primers that discriminate this family from other guanylyl cyclases. We demonstrate that amplification of known members of this family is effectively and specifically inhibited by the corresponding RNAs, alone or in combination. This robust method can be adapted to any application where multiple PCR products are amplified, as long as the sequence of the desired and the undesired PCR product(s) is sufficiently distinct between the primers.     

一种单核苷酸多态性的单倍型分析技术

运用多步PCR和测序技术,完成基因组中相距较远的单核苷酸多态位点的单倍型构建。通过设计2条等位基因特异性引物,扩增大片段DNA(10kb左右),以此大片段DNA作为下一轮PCR反应的模板,再在该片段中设计待检测区域的PCR引物,进行第2轮PCR。对PCR产物进行测序分析,确定其多态位点处的等位基因。结合第1轮PCR中的等位基因特异性引物,即可确定该大片段DNA中不同单核苷酸多态性构成的单倍型。以脂蛋白脂酶基因为例,应用其启动子区以及第4外显子区的等位基因特异性引物扩增约16kb的DNA片段,然后检测位于该片段中第2、3外显子的多态性。在￡-尸￡-基因第2内含子中发现了 13557G→A多态性。经分析确定出-421G／ 13557G／ 15222A、-421A／ 13557G／ 15222A、-421G／ 13557G／ 15222G、-421G／ 13557A／ 15222A等4种单倍型。等位基因特异性PCR结合小片段测序是一种快捷高效的对相距较远的多个SNP进行单倍型构建的新策略。     

Deconstructing the Polymerase Chain Reaction: Understanding and Correcting Bias Associated with Primer Degeneracies and Primer-Template Mismatches

The polymerase chain reaction (PCR) is sensitive to mismatches between primer and template, and mismatches can lead to inefficient amplification of targeted regions of DNA template. In PCRs in which a degenerate primer pool is employed, each primer can behave differently. Therefore, inefficiencies due to different primer melting temperatures within a degenerate primer pool, in addition to mismatches between primer binding sites and primers, can lead to a distortion of the true relative abundance of targets in the original DNA pool. A theoretical analysis indicated that a combination of primer-template and primer-amplicon interactions during PCR cycles 3–12 is potentially responsible for this distortion. To test this hypothesis, we developed a novel amplification strategy, entitled “Polymerase-exonuclease (PEX) PCR”, in which primer-template interactions and primer-amplicon interactions are separated. The PEX PCR method substantially and significantly improved the evenness of recovery of sequences from a mock community of known composition, and allowed for amplification of templates with introduced mismatches near the 3’ end of the primer annealing sites. When the PEX PCR method was applied to genomic DNA extracted from complex environmental samples, a significant shift in the observed microbial community was detected. Furthermore, the PEX PCR method provides a mechanism to identify which primers in a primer pool are annealing to target gDNA. Primer utilization patterns revealed that at high annealing temperatures in the PEX PCR method, perfect match annealing predominates, while at lower annealing temperatures, primers with up to four mismatches with templates can contribute substantially to amplification. The PEX PCR method is simple to perform, is limited to PCR mixes and a single exonuclease step which can be performed without reaction cleanup, and is recommended for reactions in which degenerate primer pools are used or when mismatches between primers and template are possible.     

Method for preparing single-stranded DNA templates for Pyrosequencing using vector ligation and universal biotinylated primers

In Pyrosequencing, the addition of nucleotides to a primer-template hybrid is monitored by enzymatic conversion of chemical energy into detectable light. The technique yields both qualitative and quantitative sequence information because the chemical energy is released by a stoichiometric split off of pyrophosphates from incorporated deoxynucleotide triphosphates and a defined nucleotide dispensation order is given. Because Pyrosequencing works best if single-stranded DNA templates are used, template generation usually requires PCR with a target-specific biotinylated primer and a subsequent purification involving interaction of the biotin label with immobilized streptavidin. To circumvent the need for numerous and expensive template-specific biotinylated primers, we developed a method that uses the ligation of amplified DNA fragments into a plasmid vector, thereby facilitating subsequent PCR using a universal vector-specific biotinylated primer. This approach allows easy and straightforward isolation of single-stranded templates of any PCR product. As a proof of principle, we used the method for genotyping two single-nucleotide polymorphisms in the human genes CARD15 and A2M and for characterization of four multisite variations in the human DEFB104 gene.     

PCR-free mutation detection of BRCA1 on a zip-code microarray using ligase chain reaction

We describe here ligation-based strategy to detect mutations in BRCA1 utilizing zip-code microarray technology. In our first approach, PCR was performed to amplify the genomic regions containing the mutation sites. The PCR products were then used as templates in a subsequent ligation reaction using two ligation primers that flanked the mutation site. The primary allele-specific primer is designed to contain a base of mutation site at its 3′ end with 5′ complementarity to the respective zip-code sequence while the secondary common primer is modified by biotin at its 3′ end. Depending on the genotype of samples at the mutation site, the nick between the two ligation primers can be sealed in the presence of DNA ligase. The ligation products were then hybridized on the zip-code microarray followed by staining with streptavidine-cy3 to generate a fluorescent signal. Using this strategy we successfully genotyped selected Korean-specific mutation sites in exon 11 of BRCA1 with a wild type and two heterozygote mutant samples. Furthermore, we also demonstrated that ligase chain reaction using unamplified genomic DNA as direct templates is enough to generate sufficient signals for correct genotypings in a multiplexed manner, verifying first that PCR is not essential for this microarray-based strategy.     

A Novel and Simple PCR Walking Method for Rapid Acquisition of Long DNA Sequence Flanking a Known Site in Microbial Genome

Acquisition of flanking sequence adjacent to a known DNA site is an important task in microbial genome-related research. In this study, we developed a new method containing two rounds of PCR followed by cloning and sequencing. Firstly, specific primer (SP) is added into the reaction system for primary locus-specific linear amplification, and then a complex long primer (CLP) is added into the cooled reaction system for only one cycle. Amplification products from the first round of PCR are directly purified without electrophoresis, diluted, and used as the templates of the second PCR. Secondly, one long specific primer (LSP) and one long base-fixed primer (LFP) are adopted. The amplicons are purified for cloning and sequencing. The achievement of specific amplification for long flanking region mainly depends on ingenious and precise settings of PCR programs, structure design of CLP primer, adding of CLP primer after specific linear amplification, concentration ratio of CLP and SP primer, applying long primers, etc. Through this method, we successfully performed the long PCR walkings (>1.5 Kb) on rpoB gene of Vibrio vulnificus, transposon-like gene of V. alginolyticus, and sto gene of V. cholerae. The method provides a robust and simple strategy for rapid amplification of long unknown DNA fragments from microbes.     

The influence of quality of primers on the formation of primer dimers in PCR

Abstract

Polymerase chain reaction (PCR) is the most commonly used method for nucleic acids amplification. PCR performance depends on several causes, among which the quality of primers is one of the main determinants affecting specificity, sensitivity and reliability of the reaction. Here, we report on the results of the detailed study devoted to the dimerization of the primers during PCR. The course and specificity of the reaction were studied on the model DNA templates as well as genomic DNA using primers that form amplifiable heterodimeric structures with different thermodynamic stability. It was confirmed that more than two 3′-overlapping nucleotides cause a considerable accumulation of primer dimers. It turned out that the presence of any DNA promotes the formation of dimers even for primers, which do not tend to nonspecific amplification in the absence of DNA. It was shown that dimerization could not be eliminated by commonly used techniques. Even the use of hot-start DNA polymerases does not prevent PD formation if primers with stable 3′-overlapping are employed. Despite several advantages of PCR with abutting primers, their close disposition has no benefits regarding the formation of PD if low-quality primers are utilized.     

Use of ‘long’ polymerase chain reaction and magnetic beads for extraction of chromosome-specific cDNAs

The detection of expressed sequences of genomic DNA is an important aspect of the human genome project. A technique is described where ‘long’ polymerase chain reaction (LPCR), which allows for extended large fragment production of > 10–20 kb, is used with Alu primers to generate a biotinylated template for cDNA hybridization. Streptavidin-coated magnetic beads are used to extract the long PCR templates and bound cDNAs, which are recovered by standard PCR. This method allows the isolation of cDNAs from virtually any human DNA source and should be valuable in expression mapping, positional cloning and gene isolation.     

痘病毒科不同病毒属特异的PCR检测方法的建立

目的:建立可准确、快速地鉴别诊断可感染人的不同属痘病毒的特异PCR方法。方法:设计针对正痘病毒属、副痘病毒属和传染性软疣病毒属的多对特异引物,并制备相应的DNA模板,针对不同的模板优化引物与反应条件,分别进行检测筛选,建立病毒属特异的单独与多重PCR方法。结果:单一模板的PCR扩增反应中,正痘病毒的检测敏感性可达101拷贝/μL(引物为OPEaL-F1880/OPEaL-R2057),副痘病毒的检测敏感性可达101拷贝/μL(引物为PP2/PP3),传染性软疣病毒的检测敏感性为100 pg/μL体系(引物为MCV1/MCV2);混合模板的PCR扩增反应中,各属特异的引物均可获得预期大小的特异片段。结论:我们建立的PCR诊断方法,可用于痘病毒科不同病毒属感染的实验室特异快速鉴别诊断。