Removal of Acid Blue25 from aqueous solutions using Bengal gram fruit shell (BGFS) biomass

The feasibility for the removal of Acid Blue25 (AB25) by Bengal gram fruit shell (BGFS), an agricultural by-product, has been investigated as an alternative for high-cost adsorbents. The impact of various experimental parameters such as dose, different dye concentration, solution pH, and temperature on the removal of Acid Blue25 (AB25) has been studied under the batch mode of operation. pH is a significant impact on the sorption of AB25 onto BGFS. The maximum removal of AB25 was achieved at a pH of 2 (83.84%). The optimum dose of biosorbent was selected as 200 mg for the removal of AB25 onto BGFS. Kinetic studies reveal that equilibrium reached within 180 minutes. Biosorption kinetics has been described by Lagergren equation and biosorption isotherms by classical Langmuir and Freundlich models. Equilibrium data were found to fit well with the Langmuir and Freundlich models, and the maximum monolayer biosorption capacity was 29.41 mg g^?1 of AB25 onto BGFS. The kinetic studies indicated that the pseudo-second-order (PSO) model fitted the experimental data well. In addition, thermodynamic parameters have been calculated. The biosorption process was spontaneous and exothermic in nature with negative values of ΔG° (?1.6031 to ?0.1089 kJ mol^?1) and ΔH° (?16.7920 kJ mol^?1). The negative ΔG° indicates the feasibility of physical biosorption process. The results indicate that BGFS could be used as an eco-friendly and cost-effective biosorbent for the removal of AB25 from aqueous solution.     

Biosorption of Acid Black 172 and Congo Red from aqueous solution by nonviable Penicillium YW 01: Kinetic study, equilibrium isotherm and artificial neural network modeling

The main objective of this work was to investigate the biosorption performance of nonviable Penicillium YW 01 biomass for removal of Acid Black 172 metal-complex dye (AB) and Congo Red (CR) in solutions. Maximum biosorption capacities of 225.38 and 411.53 mg g⁻¹ under initial dye concentration of 800 mg L⁻¹, pH 3.0 and 40 °C conditions were observed for AB and CR, respectively. Biosorption data were successfully described with Langmuir isotherm and the pseudo-second-order kinetic model. The Weber-Morris model analysis indicated that intraparticle diffusion was the limiting step for biosorption of AB and CR onto biosorbent. Analysis based on the artificial neural network and genetic algorithms hybrid model indicated that initial dye concentration and temperature appeared to be the most influential parameters for biosorption process of AB and CR onto biosorbent, respectively. Characterization of the biosorbent and possible dye-biosorbent interaction were confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy.     

Utilization of unconventional lignocellulosic waste biomass for the biosorption of toxic triphenylmethane dye malachite green from aqueous solution

Biosorption potential of novel lignocellulosic biosorbents Musa sp. peel (MSP) and Aegle marmelos shell (AMS) was investigated for the removal of toxic triphenylmethane dye malachite green (MG), from aqueous solution. Batch experiments were performed to study the biosorption characteristics of malachite green onto lignocellulosic biosorbents as a function of initial solution pH, initial malachite green concentration, biosorbents dosage, and temperature. Biosorption equilibrium data were fitted to two and three parameters isotherm models. Three-parameter isotherm models better described the equilibrium data. The maximum monolayer biosorption capacities obtained using the Langmuir model for MG removal using MSP and AMS was 47.61 and 18.86 mg/g, respectively. The biosorption kinetic data were analyzed using pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The pseudo-second-order kinetic model best fitted the experimental data, indicated the MG biosorption using MSP and AMS as chemisorption process. The removal of MG using AMS was found as highly dependent on the process temperature. The removal efficiency of MG showed declined effect at the higher concentrations of NaCl and CaCl₂. The regeneration test of the biosorbents toward MG removal was successful up to three cycles.     

Kinetic and equilibrium studies of copper biosorption onto <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> base using direct determination of copper by a voltammetric method

This paper provided information on the use of linear sweep anodic stripping voltammetry for evaluating the process of copper biosorption onto Pseudomonas aeruginosa. This technique was suited to determine the concentration of free copper ion on site on the mercaptoethane sulfonate modified gold electrode surface without any pretreatment. It was in favor of the study of kinetic process as the fast changing kinetic data characteristic just after the beginning of biosorption could be accurately depicted. Based on the electrochemical results, the kinetics and equilibrium of biosorption were systematically examined. The pseudo-second-order kinetic model was used to correlate the kinetic experimental data and the kinetic parameters were evaluated. The Langmuir and Freundlich models were applied to describe the biosorption equilibrium. It was found that the Langmuir isotherm fitted the experimental data better than the Freundlich isotherm. Maximum adsorption capacity of copper ion onto Pseudomonas aeruginosa was 0.9355 μmol mg⁻¹ (about 59.4417 mg g⁻¹).     

Kinetic and Equilibrium Studies of Cr(VI) Biosorption by Dead <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> Biomass

Many studies have been carried out on the biosorption capacity of different kinds of biomass. However, reports on the kinetic and equilibrium study of the biosorption process are limited. In our experiments, the removal of Cr(VI) from aqueous solution was investigated in a batch system by sorption on the dead cells of Bacillus licheniformis isolated from metal-polluted soils. Equilibrium and kinetic experiments were performed at various initial metal concentrations, pH, contact time, and temperatures. The biomass exhibited the highest Cr(VI) uptake capacity at 50°C, pH 2.5 and with the initial Cr(VI) concentration of 300 mg/g. The Langmuir and Freundlich models were considered to identify the isotherm that could better describe the equilibrium adsorption of Cr(VI) onto biomass. The Langmuir model fitted our experimental data better than the Freundlich model. The suitability of the pseudo first-order and pseudo second-order kinetic models for the sorption of Cr(VI) onto Bacillus licheniformis was also discussed. It is better to apply the pseudo second-kinetic model to describe the sorption system.     

Biosorption of Pb(II) and Cr(III) from aqueous solution by lichen (Parmelina tiliaceae) biomass

The biosorption characteristics of Pb(II) and Cr(III) ions from aqueous solution using the lichen (Parmelina tiliaceae) biomass were investigated. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by P. tiliaceae biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of P. tiliaceae biomass for Pb(II) and Cr(III) ions was found to be 75.8 mg/g and 52.1mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 12.7 kJ/mol for Pb(II) biosorption and 10.5 kJ/mol for Cr(III) biosorption, indicating that the biosorption of both metal ions was taken place by chemical ion-exchange. The calculated thermodynamic parameters (delta G degrees , delta H degrees and delta S degrees ) showed that the biosorption of Pb(II) and Cr(III) ions onto P. tiliaceae biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.     

Bioremediation potential of a widespread industrial biowaste as renewable and sustainable biosorbent for synthetic dye pollution

In this study, a model synthetic azo dye (Basic red 46) bioremoval by Carpinus betulus sawdust as inexpensive, eco-friendly, and sustainable biosorbent from aqueous solution was examined in a batch biosorption system. The effective environmental parameters on the biosorption process, such as the value of pH, amount of biosorbent, initial dye concentration and contact time were optimized using classical test design. The possible dye-biosorbent interaction was determined by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The equilibrium, thermodynamic, and kinetic studies for the biosorption of Basic red 46 onto the sawdust biomass were performed. In addition, a single-stage batch dye biosorption system was also designed. The dye biosorption yield of biosorbent was significantly influenced by the change of operating variables. The experimental data were best described by the Freundlich isotherm model and both the pseudo-first-order kinetic and the pseudo-second-order kinetic models. Thermodynamic research indicated that the biosorption of dye was feasible and spontaneous. Based on the Langmuir isotherm model, the biosorbent was found to have a maximum biosorption potential higher than many other biosorbents in the literature (264.915?mg g^?1). Thus, this investigation presents a novel green option for the assessment of waste sawdust biomass as a cheap and effective biosorbent material.     

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics,Equilibrium and Thermodynamic Studies

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g^-1. Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater.     

Biosorption Behavior of Ciprofloxacin onto Enteromorpha prolifera: Isotherm and Kinetic Studies

The studies aimed at the feasibility of using Enteromorpha prolifera for the removal of ciprofloxacin from aqueous solutions. Batch experiments were carried out for the biosorption of ciprofloxacin onto Enteromorpha prolifera. The factors affecting the biosorption process such as the initial concentration, dosage, pH and the contact time were studied. Enteromorpha prolifera exhibited a maximum biosorption capacity of 21.7 mg/g. The pseudo-second-order kinetic model described the ciprofloxacin biosorption process with a good fitting. The optimum pH of ciprofloxacin adsorbed by Enteromorpha prolifera was 10. Biosorption equilibrium studies demonstrated that the biosorption followed Freundlich isotherm model, which implied a heterogeneous biosorption phenomenon.     

Thermodynamic,Equilibrium and Kinetic Study of the Biosorption of Basic Blue 41 using Bacillus maceran

Thermodynamic, kinetic and equilibrium studies during the biosorption of Basic blue 41(BB 41) from aqueous solution using Bacillus macerans were carried out with a focus on pH, contact time, temperature, biomass dosage and initial dye concentration. The maximum adsorption capacity was found to be 89.2 mg/g under optimal conditions of pH (10.0) and temperature (25 °C). The biosorption rates obtained were consistent with the pseudo‐second order kinetic models. The equilibrium data were analyzed using linearized forms of Langmuir and Freundlich isotherms, and the Langmuir isotherm was found to provide the best correlation of the experimental data for the biosorption of BB 41. The equilibrium time for the removal of BB 41 by the biomass was attained within 90 min. Thermodynamic parameters such as free energy (<$>\Delta G<$>), enthalpy (<$>\Delta H<$>), and entropy (<$>\Delta S<$>) were also calculated. The results indicate that biosorption is spontaneous and exothermic in nature. The negative value of entropy confirms the decreased randomness at the solid‐liquid interface during the adsorption of BB 41 onto Bacillus macerans.     

Copper biosorption on Lyngbya putealis: Application of response surface methodology (RSM)

The potential use of biosorbent prepared from an indigenously isolated cyanobacterium, Lyngbya putealis, for the removal of copper from aqueous solution has been investigated under optimized conditions in this study. Batch mode experiments were performed to determine the adsorption equilibrium and kinetic behavior of copper in aqueous solution allowing the computation of kinetic parameters and maximum metal adsorption capacity. Influences of other parameters like initial metal ion concentration (10-100 mg l⁻¹), pH (2-8) and biosorbent dose (0.1-1.0 g/100 ml) on copper adsorption were also examined, using Box-Behnken design matrix. Very high regression coefficient between the variables and the response (R² = 0.9533) indicates excellent evaluation of experimental data by second order polynomial regression model. The response surface method indicated that 40-50 mg l⁻¹ initial copper concentration, 6.0-6.5 pH and biosorbent dose of 0.6-0.8 g/100 ml were optimal for biosorption of copper by biosorbent prepared from L. putealis. On the basis of experimental results and model parameters, it can be inferred that the biosorbent which has quite high biosorption capacity can be utilized for the removal of copper from aqueous solution.     

Modeling studies on mono and binary component biosorption of phenol and cyanide from aqueous solution onto activated carbon derived from saw dust

Biosorption is an effective treatment method for the removal of phenol and cyanide from aqueous solution by saw dust activated carbon (SDAC). Batch experiments were achieved as a function of several experimental parameters, i.e. influence of biosorbent dose (5–60 g/L) contact time (2–40 h), pH (4–12), initial phenol concentration (100–1000 mg/L) and initial cyanide concentration (10–100 mg/L) and temperature (20–40 °C). The biosorption capacities of the biosorbent were detected as 178.85 mg/g for phenol with 300 mg/L of initial concentration and 0.82 mg/g for cyanide with 30 mg/L of initial concentration. The optimum pH is found to be 8 for phenol and 9 for cyanide biosorption. The mono component biosorption equilibrium data for both phenol and cyanide were well defined by Redlich–Peterson model and binary component adsorption equilibrium data well fitted by extended Freundlich model. The percentage removal of phenol and cyanide using SDAC was 66.67% and 73.33%, respectively. Equilibrium established within 30 h for phenol and 28 h for cyanide. Kinetic studies revealed that biosorption of phenol followed pseudo second order indicating adsorption through chemisorption and cyanide followed pseudo first order kinetic model indicating adsorption through physisorption. Thermodynamic studies parameters, i.e., enthalpy (Δh₀), entropy (ΔS₀) and Gibb’s free energy (ΔG₀) have also been considered for the system. Thermodynamic modeling studies revealed that the process of cyanide biosorption was endothermic and phenol biosorption was exothermic in nature.     

Biosorption of cadmium(II), lead (II) and copper(II) with the filamentous fungus Phanerochaete chrysosporium

The biosorption from artificial wastewaters of heavy metals (Cd(II), Pb(II) and Cu(II)) onto the dry fungal biomass of Phanerochaete chryosporium was studied in the concentration range of 5-500 mg l(-1). The maximum absorption of different heavy metal ions on the fungal biomass was obtained at pH 6.0 and the biosorption equilibrium was established after about 6 h. The experimental biosorption data for Cd(II), Pb(II) and Cu(II) ions were in good agreement with those calculated by the Langmuir model.     

Biosorption of copper(II) and cobalt(II) from aqueous solutions by crab shell particles

Biosorption of each of the heavy metals, copper(II) and cobalt(II) by crab shell was investigated in this study. The biosorption capacities of crab shell for copper and cobalt were studied at different particle sizes (0.456-1.117 mm), biosorbent dosages (1-10 g/l), initial metal concentrations (500-2000 mg/l) and solution pH values (3.5-6) in batch mode. At optimum particle size (0.767 mm), biosorbent dosage (5 g/l) and initial solution pH (pH 6); crab shell recorded maximum copper and cobalt uptakes of 243.9 and 322.6 mg/g, respectively, according to Langmuir model. The kinetic data obtained at different initial metal concentrations indicated that biosorption rate was fast and most of the process was completed within 2h, followed by slow attainment of equilibrium. Pseudo-second order model fitted the data well with very high correlation coefficients (>0.998). The presence of light and heavy metal ions influenced the copper and cobalt uptake potential of crab shell. Among several eluting agents, EDTA (pH 3.5, in HCl) performed well and also caused low biosorbent damage. The biosorbent was successfully regenerated and reused for five cycles.     

Biosorption of tetradecyl benzyl dimethyl ammonium chloride on activated sludge: kinetic, thermodynamic and reaction mechanisms

The biosorption of tetradecyl benzyl dimethyl ammonium chloride (C₁₄BDMA) onto activated sludge was examined in aqueous solution with respect to the contact time, temperature and particle size. Equilibrium reached in about 2 h contact time. An decrease in the temperature increases of biosorption capacity of C₁₄BDMA onto activated sludge, which also increases with decreasing particle size. The experimental data fit the pseudo-second-order kinetics model well. The Langmuir and Freundlich models were applied to describe equilibrium isotherms, and the equilibrium partitioning data was described well by both models. Thermodynamic data showed that C₁₄BDMA biosorption onto activated sludge was feasible, spontaneous and exothermic. The Fourier transform infrared (FT-IR) spectrophotometry results show that both physisorption and chemisorption were involved. The measured zeta potential values and the enhanced cation concentration indicate the presence of electrostatic interactions, hydrophobic interactions and ion exchange.     

Kinetic and equilibrium models for biosorption of Cr(VI) on chemically modified seaweed,Cystoseira indica

The biosorption data of hexavalent chromium by marine brown algae Cystoseira indica, which was chemically modified by crosslinking with epichlorohydrin (CB1, CB2), or oxidized by potassium permanganate (CB3), or only washed with distilled water (RB), has been used for kinetic studies based on fractional power, Elovich, pseudo-first order and pseudo-second order rate expressions. Five three parameter biosorption isotherm models, viz. Redlich–Peterson, Sips, Khan, Radke–Prausnitz and Toth are tested for their applicability apart from 6 two-parameter models. Non-linear curve fitting procedure was adopted for fitting the kinetic as well as equilibrium data in the kinetic and isotherm models and for the determination of parameters. The time-dependent Cr(VI) biosorption data were well-described by pseudo-second-order kinetic model. The intraparticle diffusion study revealed that film diffusion might be involved in Cr(VI) biosorption in the present case. Among the two-parameter models, the Langmuir model produces the best fit, while, among the three-parameter models, the best fit is produced by the Khan model, for the biosorption of Cr(VI) on all the four biosorbents studied.     

Biosorption of Nickel(II) from aqueous solution by the fungal mat of Trametes versicolor (rainbow) biomass: equilibrium, kinetics, and thermodynamic studies

This study investigates the equilibrium, kinetics and thermodynamics of Nickel(II) biosorption from aqueous solution by the fungal mat of Trametes versicolor (rainbow) biomass. The optimum biosorption conditions like pH, contact time, biomass dosage, initial metal ion concentration and temperaturewere determined in the batch method. The biosorbent was characterized by FTIR, SEM and BET surface area analysis. The experimental data were analyzed in terms of pseudo-first-order, pseudo-secondorder and intraparticle diffusion kinetic models, further it was observed that the biosorption process of Ni(II) ions closely followed pseudo-second-order kinetics. The equilibrium data of Ni(II) ions at 303, 313, and 323 K were fitted to the Langmuir and Freundlich isotherm models. Langmuir isotherm provided a better fit to the equilibrium data andthe maximum monolayer biosorption capacity of the T. versicolor(rainbow) biomass for Ni(II) was 212.5 mg/g at pH 4.0. The calculated thermodynamic parameters, ΔG^○, ΔH^○, and ΔS^○, demonstrated that the biosorption of Ni(II) ions onto the T. versicolor (rainbow) biomass was feasible, spontaneous and endothermic at 303 ～ 323 K. The performance of the proposed fungal biosorbent was also compared with that of many other reported sorbents for Nickel(II) removal and it was observed that the proposed biosorbent is effective in terms of its high sorption capacity.     

Biosorption of cadmium (II) ions by immobilized cells of Pycnoporus sanguineus from aqueous solution

Biosorption of cadmium (II) ions from aqueous solution onto immobilized cells of Pycnoporus sanguineus (P. sanguineus) was investigated in a batch system. Equilibrium and kinetic studies were conducted by considering the effect of pH, initial cadmium (II) concentration, biomass loading and temperature. Results showed that the uptake of cadmium (II) ions increased with the increase of initial cadmium (II) concentration, pH and temperature. Langmuir, Freundlich and Redlich-Peterson isotherm models were used to analyze the equilibrium data at different temperatures. Langmuir isotherm model described the experimental data well followed by Redlich-Peterson and Freundlich isotherm models. Biosorption kinetics data were fitted using pseudo-first, pseudo-second-order and intraparticle diffusion. It was found that the kinetics data fitted well the pseudo-second-order followed by intraparticle diffusion. Thermodynamic parameters such as standard Gibbs free energy (Delta G0), standard enthalpy (Delta H0) and standard entropy (Delta S0) were evaluated. The result showed that biosorption of cadmium (II) ions onto immobilized cells of P. sanguineus was spontaneous and endothermic nature.