Preparation of 3D fibrin scaffolds for stem cell culture applications

Stem cells are found in naturally occurring 3D microenvironments in vivo, which are often referred to as the stem cell niche. Culturing stem cells inside of 3D biomaterial scaffolds provides a way to accurately mimic these microenvironments, providing an advantage over traditional 2D culture methods using polystyrene as well as a method for engineering replacement tissues. While 2D tissue culture polystrene has been used for the majority of cell culture experiments, 3D biomaterial scaffolds can more closely replicate the microenvironments found in vivo by enabling more accurate establishment of cell polarity in the environment and possessing biochemical and mechanical properties similar to soft tissue. A variety of naturally derived and synthetic biomaterial scaffolds have been investigated as 3D environments for supporting stem cell growth. While synthetic scaffolds can be synthesized to have a greater range of mechanical and chemical properties and often have greater reproducibility, natural biomaterials are often composed of proteins and polysaccharides found in the extracelluar matrix and as a result contain binding sites for cell adhesion and readily support cell culture. Fibrin scaffolds, produced by polymerizing the protein fibrinogen obtained from plasma, have been widely investigated for a variety of tissue engineering applications both in vitro and in vivo. Such scaffolds can be modified using a variety of methods to incorporate controlled release systems for delivering therapeutic factors. Previous work has shown that such scaffolds can be used to successfully culture embryonic stem cells and this scaffold-based culture system can be used to screen the effects of various growth factors on the differentiation of the stem cells seeded inside. This protocol details the process of polymerizing fibrin scaffolds from fibrinogen solutions using the enzymatic activity of thrombin. The process takes 2 days to complete, including an overnight dialysis step for the fibrinogen solution to remove citrates that inhibit polymerization. These detailed methods rely on fibrinogen concentrations determined to be optimal for embryonic and induced pluripotent stem cell culture. Other groups have further investigated fibrin scaffolds for a wide range of cell types and applications - demonstrating the versatility of this approach.     

Fibrin as a scaffold for cardiac tissue engineering

Fibrin is a natural biopolymer with many interesting properties, such as biocompatibility, bioresorbability, ease of processing, ability to be tailored to modify the conditions of polymerization, and potential for incorporation of both cells and cell mediators. Moreover, the fibrin network has a nanometric fibrous structure, mimicking extracellular matrix, and it can also be used in autologous applications. Therefore, fibrin has found many applications in tissue engineering, combined with cells, growth factors, or drugs. Because a major limitation of cardiac cell therapy is low cell engraftment, the use of biodegradable scaffolds for specific homing and in situ cell retention is desirable. Thus, fibrin-based injectable cardiac tissue engineering may enhance cell therapy efficacy. Fibrin-based biomaterials can also be used for engineering heart valves or cardiac patches. The aim of this review is to show cardiac bioengineering uses of fibrin, both as a cell delivery vehicle and as an implantable biomaterial.     

Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering

Culturing cells in a three dimensional hydrogel environment is an important technique for developing constructs for tissue engineering as well as studying cellular responses under various culture conditions in vitro. The three dimensional environment more closely mimics what the cells observe in vivo due to the application of mechanical and chemical stimuli in all dimensions ¹. Three-dimensional hydrogels can either be made from synthetic polymers such as PEG-DA ² and PLGA ³ or a number of naturally occurring proteins such as collagen ⁴, hyaluronic acid ⁵ or fibrin ^6,7. Hydrogels created from fibrin, a naturally occurring blood clotting protein, can polymerize to form a mesh that is part of the body''s natural wound healing processes ⁸. Fibrin is cell-degradable and potentially autologous ⁹, making it an ideal temporary scaffold for tissue engineering.Here we describe in detail the isolation of neonatal cardiomyocytes from three day old rat pups and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. Neonatal myocytes are a common cell source used for in vitro studies in cardiac tissue formation and engineering ⁴. Fibrin gel is created by mixing fibrinogen with the enzyme thrombin. Thrombin cleaves fibrinopeptides FpA and FpB from fibrinogen, revealing binding sites that interact with other monomers ¹⁰. These interactions cause the monomers to self-assemble into fibers that form the hydrogel mesh. Because the timing of this enzymatic reaction can be adjusted by altering the ratio of thrombin to fibrinogen, or the ratio of calcium to thrombin, one can injection mold constructs with a number of different geometries ^11,12. Further we can generate alignment of the resulting tissue by how we constrain the gel during culture ¹³.After culturing the engineered cardiac tissue constructs for two weeks under static conditions, the cardiac cells have begun to remodel the construct and can generate a contraction force under electrical pacing conditions ⁶. As part of this protocol, we also describe methods for analyzing the tissue engineered myocardium after the culture period including functional analysis of the active force generated by the cardiac muscle construct upon electrical stimulation, as well as methods for determining final cell viability (Live-Dead assay) and immunohistological staining to examine the expression and morphology of typical proteins important for contraction (Myosin Heavy Chain or MHC) and cellular coupling (Connexin 43 or Cx43) between myocytes.     

Fibrin acts as biomimetic niche inducing both differentiation and stem cell marker expression of early human endothelial progenitor cells

Objectives: Transplantation of endothelial progenitor cells (EPCs) is a promising approach for revascularization of tissue. We have used a natural and biocompatible biopolymer, fibrin, to induce cell population growth, differentiation and functional activity of EPCs. Materials and methods: Peripheral blood mononuclear cells were cultured for 1 week to obtain early EPCs. Fibrin was characterized for stiffness and capability to sustain cell population expansion at different fibrinogen–thrombin ratios. Viability, differentiation and angiogenic properties of EPCs were evaluated and compared to those of EPCs grown on fibronectin. Results: Fibrin had a nanometric fibrous structure forming a porous network. Fibrinogen concentration significantly influenced fibrin stiffness and cell growth: 9 mg/ml fibrinogen and 25 U/ml thrombin was the best ratio for enhanced cell viability. Moreover, cell viability was significantly higher on fibrin compared to being on fibronectin. Even though no significant difference was observed in expression of endothelial markers, culture on fibrin elicited marked induction of stem cell markers OCT 3/4 and NANOG. In vitro angiogenesis assay on Matrigel showed that EPCs grown on fibrin retain angiogenetic capability as EPCs grown on fibronectin, but significantly better release of cytokines involved in cell recruitment was produced by EPC grown on fibrin. Conclusion: Fibrin is a suitable matrix for EPC growth, differentiation and angiogenesis capability, suggesting that fibrin gel may be very useful for regenerative medicine.     

Three-dimensional scaffold containing EGF incorporated biodegradable polymeric nanoparticles for stem cell based tissue engineering applications

Stem cell-based tissue engineering holds much hope for the development of multifunctional tissues to replace diseased organs. The attachment and survival of stem cells on a three-dimensional (3D) scaffold must be enhanced for faster progression of stem cell based tissue engineering. This study evaluate the stability of mesenchymal stem cells (MSCs) in 3D porous scaffolds composed of a collagen and chitosan blend impregnated with epidermal growth factor incorporated chitosan nanoparticles (EGF-CNP). The EGF-CNP scaffolds were characterized by transmission electron microscopy, which revealed that the nanoparticles were round in shape and 20 ∼ 50 nm in size. The scaffolds were prepared by freeze drying. A Fourier-transform infrared spectrum study revealed that the linkage between collagen and chitosan was through an ionic interaction. Thermal analysis and degradation studies showed that the scaffold could be used in tissue engineering application. MSCs proliferated well in the EGF-CNP impregnated scaffold. A scanning electron microscope study showed anchored and elongated MSCs on the EGF-CNP impregnated scaffold. A 3D biodegradable collagen chitosan scaffold impregnated with EGF-CNP is a promising transportable candidate for MSC-based tissue engineering, and this scaffold could be used as an in vitro model for subsequent clinical applications.     

Cell–scaffold mechanical interplay within engineered tissue

Effective tissue engineering requires appropriate selection of cells and scaffold, where the latter serves as a mechanical and biological support for cell growth and functionality. The optimal combination of cell source and scaffold properties can vary for each desired application. Such preconditions necessitate enhanced understanding of the interactions between cells and scaffold within engineered tissue. Several studies have examined the deforming effects cells induce in scaffolds via exertion of contractile forces. In contrast, other studies focus on the scaffold's biochemical and mechanical properties and their effects on cell behavior.This review summarizes the mechanical interplay between cells and scaffold within engineered tissue. We present evidence for contractile forces exerted by cells on three-dimensional (3D) scaffolds and discuss existing methods for their quantification. In addition, we address some theories related to the effects of scaffold stiffness and mechanical stimulation on cell behavior. Further understanding of the reciprocal effects between cells and scaffold will provide both enhanced knowledge regarding the expected properties of engineered tissue and more competent tissue regeneration techniques.     

Three Dimensional Collagen Scaffold Promotes Intrinsic Vascularisation for Tissue Engineering Applications

Here, we describe a porous 3-dimensional collagen scaffold material that supports capillary formation in vitro, and promotes vascularization when implanted in vivo. Collagen scaffolds were synthesized from type I bovine collagen and have a uniform pore size of 80 μm. In vitro, scaffolds seeded with primary human microvascular endothelial cells suspended in human fibrin gel formed CD31 positive capillary-like structures with clear lumens. In vivo, after subcutaneous implantation in mice, cell-free collagen scaffolds were vascularized by host neovessels, whilst a gradual degradation of the scaffold material occurred over 8 weeks. Collagen scaffolds, impregnated with human fibrinogen gel, were implanted subcutaneously inside a chamber enclosing the femoral vessels in rats. Angiogenic sprouts from the femoral vessels invaded throughout the scaffolds and these degraded completely after 4 weeks. Vascular volume of the resulting constructs was greater than the vascular volume of constructs from chambers implanted with fibrinogen gel alone (42.7±5.0 μL in collagen scaffold vs 22.5±2.3 μL in fibrinogen gel alone; p<0.05, n = 7). In the same model, collagen scaffolds seeded with human adipose-derived stem cells (ASCs) produced greater increases in vascular volume than did cell-free collagen scaffolds (42.9±4.0 μL in collagen scaffold with human ASCs vs 25.7±1.9 μL in collagen scaffold alone; p<0.05, n = 4). In summary, these collagen scaffolds are biocompatible and could be used to grow more robust vascularized tissue engineering grafts with improved the survival of implanted cells. Such scaffolds could also be used as an assay model for studies on angiogenesis, 3-dimensional cell culture, and delivery of growth factors and cells in vivo.     

Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems

One of the milestones in tissue engineering has been the development of 3D scaffolds that guide cells to form functional tissue. Recently, mouldless manufacturing techniques, known as solid free-form fabrication (SFF), or rapid prototyping, have been successfully used to fabricate complex scaffolds. Similarly, to achieve simultaneous addition of cells during the scaffold fabrication, novel robotic assembly and automated 3D cell encapsulation techniques are being developed. As a result of these technologies, tissue-engineered constructs can be prepared that contain a controlled spatial distribution of cells and growth factors, as well as engineered gradients of scaffold materials with a predicted microstructure. Here, we review the application, advancement and future directions of SFF techniques in the design and creation of scaffolds for use in clinically driven tissue engineering.     

Repair and regeneration of osteochondral defects in the articular joints

People suffering from pain due to osteoarthritic or rheumatoidal changes in the joints are still waiting for a better treatment. Although some studies have achieved success in repairing small cartilage defects, there is no widely accepted method for complete repair of osteochondral defects. Also joint replacements have not yet succeeded in replacing of natural cartilage without complications. Therefore, there is room for a new medical approach, which outperforms currently used methods. The aim of this study is to show potential of using a tissue engineering approach for regeneration of osteochondral defects. The critical review of currently used methods for treatment of osteochondral defects is also provided. In this study, two kinds of hybrid scaffolds developed in Hutmacher's group have been analysed. The first biphasic scaffold consists of fibrin and PCL. The fibrin serves as a cartilage phase while the porous PCL scaffold acts as the subchondral phase. The second system comprises of PCL and PCL-TCP. The scaffolds were fabricated via fused deposition modeling which is a rapid prototyping system. Bone marrow-derived mesenchymal cells were isolated from New Zealand White rabbits, cultured in vitro and seeded into the scaffolds. Bone regenerations of the subchondral phases were quantified via micro CT analysis and the results demonstrated the potential of the porous PCL and PCL-TCP scaffolds in promoting bone healing. Fibrin was found to be lacking in this aspect as it degrades rapidly. On the other hand, the porous PCL scaffold degrades slowly hence it provides an effective mechanical support. This study shows that in the field of cartilage repair or replacement, tissue engineering may have big impact in the future. In vivo bone and cartilage engineering via combining a novel composite, biphasic scaffold technology with a MSC has been shown a high potential in the knee defect regeneration in the animal models. However, the clinical application of tissue engineering requires the future research work due to several problems, such as scaffold design, cellular delivery and implantation strategies.     

Improvement of biomaterials used in tissue engineering by an ageing treatment

Biomaterials based on crosslinked sponges of biopolymers have been extensively used as scaffolds to culture mammal cells. It is well known that single biopolymers show significant change over time due to a phenomenon called physical ageing. In this research, it was verified that scaffolds used for skin tissue engineering (based on gelatin, chitosan and hyaluronic acid) express an ageing-like phenomenon. Treatments based on ageing of scaffolds improve the behavior of skin-cells for tissue engineering purposes. Physical ageing of dry scaffolds was studied by differential scanning calorimetry and was modeled with ageing kinetic equations. In addition, the physical properties of wet scaffolds also changed with the ageing treatments. Scaffolds were aged up to 3 weeks, and then skin-cells (fibroblasts) were seeded on them. Results indicated that adhesion, migration, viability, proliferation and spreading of the skin-cells were affected by the scaffold ageing. The best performance was obtained with a 2-week aged scaffold (under cell culture conditions). The cell viability inside the scaffold was increased from 60 % (scaffold without ageing treatment) to 80 %. It is concluded that biopolymeric scaffolds can be modified by means of an ageing treatment, which changes the behavior of the cells seeded on them. The ageing treatment under cell culture conditions might become a bioprocess to improve the scaffolds used for tissue engineering and regenerative medicine.     

雪旺氏细胞与同种异体骨支架的体外共培养研究

目的:探讨雪旺细胞(Schwann’s cells,SCs)在同种异体骨支架上的生物相容性,体外构建组织工程骨神经化模型。方法:利用新鲜人体骨骼制备同种异体骨支架材料,检测其物理性能;采用优化方法提取新生SD大鼠坐骨、臂丛神经培养SCs,实验分为三维培养实验组(SCs+同种异体骨)、二维培养对照组(SCs+胶原玻片),S-100抗体免疫荧光染色鉴定SCs纯度;细胞计数法检测两组细胞增殖特点;细胞接种后第3、7天取样,扫描电镜观察。结果:同种异体骨支架具有良好的三维孔隙结构,适宜细胞贴附生长;S-100免疫荧光染色证实SCs纯度95%;扫描电镜检测显示两组SCs均可正常粘附增殖,细胞间排布规律相似,培养早期实验组SCs胞体更加细长,伪足更加明显,随着培养时间的延长表现出较强的迁移能力;细胞增殖检测:两组SCs生长曲线特征基本一致,支架材料对SCs无毒性作用。结论:同种异体骨支架SCs具有良好的生物相容性,其三维立体多孔结构有利于SCs的粘附与迁移,初步构建了体外组织工程骨神经化模型。     

Chondrocyte suspension in fibrin glue

Autologous chondrocyte implantation has been shown to be a promising method for treatment of deep articular cartilage defects. The hyaline cartilage formed by implanted autologous chondrocytes has biomechanical properties similar to those of natural articular cartilage. Between June 2006 and September 2008 we performed Autologous chondrocyte implantation (ACI) in 50 patients and the chondrocytes were supported in fibrin glue. The cartilage biopsy samples were taken from the non-weight bearing area of the patient’s femoral condyle and the samples were transferred to the cell culture laboratory. Chondrocyte were kept in culture about 20 days. Fibrin glue was used as a three dimensional carrier for chondrocyte implantation. A 450 ml of patient’s own blood was collected prior to transplantation to produce autologous fibrinogen. Alternatively the allogenic fibrinogen was prepared from Regional Blood Center voluntary donors. Before surgery the chondrocyte suspension was mixed with fibrin glue and gel—like fibrograft was prepared. The total number of cells and the size of fibrograft depended on the defect size in the knee. Our results suggest that ACI technique with fibrin glue is a promising method for treatment of cartilage defect.     

Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering

Tissue engineering is a multidisciplinary field of research in which the cells, biomaterials, and processes can be optimized to develop a tissue substitute. Three-dimensional (3D) architectural features from electrospun scaffolds, such as porosity, tortuosity, fiber diameter, pore size, and interconnectivity have a great impact on cell behavior. Regarding tissue development in vitro, culture conditions such as pH, osmolality, temperature, nutrient, and metabolite concentrations dictate cell viability inside the constructs. The effect of different electrospun scaffold properties, bioreactor designs, mesenchymal stem cell culture parameters, and seeding techniques on cell behavior can be studied individually or combined with phenomenological modeling techniques. This work reviews the main culture and scaffold factors that affect tissue development in vitro regarding the culture of cells inside 3D matrices. The mathematical modeling of the relationship between these factors and cell behavior inside 3D constructs has also been critically reviewed, focusing on mesenchymal stem cell culture in electrospun scaffolds.     

以胶原膜为支架的心肌细胞体外三维培养

将从新生乳鼠心室肌组织获取的心肌细胞接种于鼠尾胶原膜三维支架和组织培养板,以细胞形态、细胞搏动、葡萄糖比消耗率(q_glu)、乳酸比产率(q_lac)、乳酸转化率(Y_lac/glu)、肌酸激酶及乳酸脱氢酶的活力为观察指标,比较心肌细胞在鼠尾胶原膜中三维(3D)培养和组织培养板中二维(2D)培养的差异。培养于鼠尾胶原膜的乳鼠心肌细胞在第5天形成闰盘连接,形成面积约为80mm³、肉眼可见自律性同步收缩的心肌细胞3D培养物。3D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.37 μmol/10.6cells/d、2.92 μmol/106cells/d和0.38 μmol/μmol;2D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.59 μmol/10.6cells/d、3.83 μmol/10.6cells/d和 0.51 μmol/μmol。两种培养体系中乳鼠心肌细胞的肌酸激酶及乳酸脱氢酶的活力无明显差别。实验结果表明：培养于鼠尾胶原膜的心肌细胞保持正常心肌细胞的代谢活力和收缩功能。     

兔BMSCs复合纤维蛋白胶在体外分化为角膜基质细胞的研究

目的：探讨体外诱导兔骨髓间充质干细胞（BMSCs）分化为角膜基质细胞的可行性,并观察纤维蛋白胶（FG）作为细胞支架材料的效果。方法：密度梯度法获得BMSCs,体外诱导实验将细胞分为三组：对照组用普通培养皿、BMSCs培养条件并不加角膜基质细胞共培养的条件下培养;非FG共培养组使用普通培养皿并与角膜基质细胞共培养诱导BMSCs分化;FG共培养组使用铺有FG的培养皿并与角膜基质细胞共培养诱导BMSCs分化。培养1w及2w后用WestenBlot法检测三组细胞Keratocan的表达,在相差显微镜下进行形态学观察。结果：原代培养的BMSCs表现出成体干细胞潜能,CD29染色阳性,符合骨髓基质干细胞的特征。诱导培养2周后对照组BMSCs融合成单层、呈条索状生长;非FG共培养组部分细胞体积变小、多突起,局部呈梭形生长;FG共培养组细胞生长状态良好,部分细胞呈梭形或纺锤形,与FG生物相容性好。Westen检测结果：BMSCs细胞在纤维蛋白胶或普通培养皿上特定培养条件下均能诱导表达角膜基质细胞的特异性蛋白Keratocan。结论：骨髓间充质干细胞在条件培养基下可分化为角膜基质细胞,有望作为治疗角膜疾病及角膜组织工程的备选材料,纤维蛋白胶组织相容性好,可为组织工程提供移植细胞片。     

Fibrin scaffold enhances function of insulin producing cells differentiated from human umbilical cord matrix-derived stem cells

Tissue engineering is a new strategy which proposed to treat numerous human diseases nowadays. Three dimensional (3D) scaffolds fill the gap between two dimensional cell culture (2D) and animal tissues through mimicking the environmental behaviors surrounding the cells. In this study, hUCMs into insulin producing cells in fibrin scaffold were differentiated compare to conventional culture condition. Differentiation rate was estimated by real time PCR, immunocytochemistry (ICC) and the chemiluminesence (CLIA) and enzyme immunoassay (EIA). Real time PCR's results showed an increasing expression in NKX2.2, PDX1 and INS (producing the hormone insulin) genes in fibrin scaffold. Furthermore ICC analysis exhibited that insulin and pro-insulin proteins were more in fibrin scaffolds. CLIA and EIA on insulin and C peptide secretion indicated that both of groups were sensitive to the glucose challenge test but significant higher response was observed in fibrin scaffold (6.5 fold in 3D, 1.8 fold in 2D culture). It could be concluded that differentiation of hUCM cells into insulin producing cells in fibrin scaffold 3D culture system is much more efficient than 2D conventional culture system.     

微环境对细胞的影响以及仿生学在组织工程支架中的应用

微环境影响着细胞的增殖、迁移、分化以及细胞功能,细胞微环境影响细胞命运的因素包括细胞之间相互作用、细胞与细胞外基质相互作用、可溶性信号分子以及缺氧和营养对细胞的影响。组织工程支架的制备就是要利用仿生学原理最大程度模拟细胞微环境,从而应用于细胞行为研究以及临床治疗。全面了解细胞微环境对细胞的影响因素是制备组织工程支架的重要条件,而组织工程支架的研究也进一步推动了细胞微环境对细胞影响的认识。组织工程支架研究在组织工程研究中仍具有广阔前景,新的制备工艺也在组织工程支架研究中发挥着巨大推动作用。     

Current strategies for cell delivery in cartilage and bone regeneration

Several cell-based tissue-engineering therapies are emerging to regenerate damaged tissues. These strategies use autologous cells in combination with bioresorbable delivery materials. Major functions of a delivery scaffold are to provide initial mechanical stability, homogenous three-dimensional cell distribution, improved tissue differentiation, suitable handling and properties for delivery and fixation into patients. Delivery of cells can be achieved using injectable matrices, soft scaffolds, membranes, solid load-bearing scaffolds or immunoprotective macroencapsulation. Thus, to expand the clinical potential, next generation therapies will depend on smart delivery concepts that make use of the regenerative potential of stem cells, morphogenetic growth factors and biomimetic materials.     

Three-dimensional cell seeding and growth in radial-flow perfusion bioreactor for in vitro tissue reconstruction

Radial-flow perfusion bioreactor systems have been designed and evaluated to enable direct cell seeding into a three-dimensional (3-D) porous scaffold and subsequent cell culture for in vitro tissue reconstruction. However, one of the limitations of in vitro regeneration is the tissue necrosis that occurs at the central part of the 3-D scaffold. In the present study, tubular poly-L-lactic acid (PLLA) porous scaffolds with an optimized pore size and porosity were prepared by the lyophilization method, and the effect of different perfusion conditions on cell seeding and growth were compared with those of the conventional static culture. The medium flowed radially from the lumen toward the periphery of the tubular scaffolds. It was found that cell seeding under a radial-flow perfusion condition of 1.1 mL/cm2 x min was effective, and that the optimal flow rate for cell growth was 4.0 mL/cm2 x min. At this optimal rate, the increase in seeded cells in the perfusion culture over a period of 5 days was 7.3-fold greater than that by static culture over the same period. The perfusion cell seeding resulted in a uniform distribution of cells throughout the scaffold. Subsequently, the perfusion of medium and hence the provision of nutrients and oxygen permitted growth and maintenance of the tissue throughout the scaffold. The perfusion seeding/culture system was a much more effective strategy than the conventional system in which cells are seeded under a static condition and cultured in a bioreactor such as a spinner flask.     

Fabrication of a biomimetic spinal cord tissue construct with heterogenous mechanical properties using intrascaffold cell assembly

In tissue engineering studies, scaffolds play a very important role in offering both physical and chemical cues for cell growth and tissue regeneration. However, in some cases, tissue regeneration requires scaffolds with high mechanical properties (e.g., bone and cartilage), while cells need a soft mechanical microenvironment. In this study, to mimic the heterogenous mechanical properties of a spinal cord tissue, a biomimetic rat tissue construct is fabricated. A collagen-coated poly(lactic-co-glycolic acid) scaffold is manufactured using thermally induced phase separation casting. Primary rat neural cells (P01 Wistar rat cortex) with soft hydrogels are later printed within the scaffold using an image-guided intrascaffold cell assembly technique. The scaffolds have unidirectional microporous structure with parallel axial macrochannels (260 ± 4 µm in diameter). Scaffolds showed mechanical properties similar to rat spine (ultimate tensile strength: 0.085 MPa, Young's modulus [stretch]: 0.31 MPa). The bioink composed of gelatin/alginate/fibrinogen is precisely printed into the macrochannels and showed mechanical properties suitable for neural cells (Young's modulus [compressive]: 3.814 kPa). Scaffold interface, cell viability, and immunostaining analyses show uniform distribution of stable, healthy, and elongated neural cells and neurites over 14 culture days in vitro. The results demonstrated that this method can serve as a valuable tool to aid manufacturing of tissue constructs requiring heterogenous mechanical properties for complex cell and/or biomolecule assembly.