Characterization of Ceriporiopsis subvermispora bicupin oxalate oxidase expressed in Pichia pastoris

Oxalate oxidase (E.C. 1.2.3.4) catalyzes the oxygen-dependent oxidation of oxalate to carbon dioxide in a reaction that is coupled with the formation of hydrogen peroxide. Although there is currently no structural information available for oxalate oxidase from Ceriporiopsis subvermispora (CsOxOx), sequence data and homology modeling indicate that it is the first manganese-containing bicupin enzyme identified that catalyzes this reaction. Interestingly, CsOxOx shares greatest sequence homology with bicupin microbial oxalate decarboxylases (OxDC). We show that CsOxOx activity directly correlates with Mn content and other metals do not appear to be able to support catalysis. EPR spectra indicate that the Mn is present as Mn(II), and are consistent with the coordination environment expected from homology modeling with known X-ray crystal structures of OxDC from Bacillus subtilis. EPR spin-trapping experiments support the existence of an oxalate-derived radical species formed during turnover. Acetate and a number of other small molecule carboxylic acids are competitive inhibitors for oxalate in the CsOxOx catalyzed reaction. The pH dependence of this reaction suggests that the dominant contribution to catalysis comes from the monoprotonated form of oxalate binding to a form of the enzyme in which an active site carboxylic acid residue must be unprotonated.     

Investigating the roles of putative active site residues in the oxalate decarboxylase from Bacillus subtilis

Oxalate decarboxylase (OxDC) catalyzes the conversion of oxalate into CO(2) and formate using a catalytic mechanism that remains poorly understood. The Bacillus subtilis enzyme is composed of two cupin domains, each of which contains Mn(II) coordinated by four conserved residues. We have measured heavy atom isotope effects for a series of Bacillus subtilis OxDC mutants in which Arg-92, Arg-270, Glu-162, and Glu-333 are conservatively substituted in an effort to define the functional roles of these residues. This strategy has the advantage that observed isotope effects report directly on OxDC molecules in which the active site manganese center(s) is (are) catalytically active. Our results support the proposal that the N-terminal Mn-binding site can mediate catalysis, and confirm the importance of Arg-92 in catalytic activity. On the other hand, substitution of Arg-270 and Glu-333 affects both Mn(II) incorporation and the ability of Mn to bind to the OxDC mutants, thereby precluding any definitive assessment of whether the metal center in the C-terminal domain can also mediate catalysis. New evidence for the importance of Glu-162 in controlling metal reactivity has been provided by the unexpected observation that the E162Q OxDC mutant exhibits a significantly increased oxalate oxidase and a concomitant reduction in decarboxylase activities relative to wild type OxDC. Hence the reaction specificity of a catalytically active Mn center in OxDC can be perturbed by relatively small changes in local protein environment, in agreement with a proposal based on prior computational studies.     

Mutagenesis of folylpolyglutamate synthetase indicates that dihydropteroate and tetrahydrofolate bind to the same site

The folylpolyglutamate synthetase (FPGS) enzyme of Escherichia coli differs from that of Lactobacillus casei in having dihydrofolate synthetase activity, which catalyzes the production of dihydrofolate from dihydropteroate. The present study undertook mutagenesis to identify structural elements that are directly responsible for the functional differences between the two enzymes. The amino terminal domain (residues 1-287) of the E. coli FPGS was found to bind tetrahydrofolate and dihydropteroate with the same affinity as the intact enzyme. The domain-swap chimera proteins between the E. coli and the L. casei enzymes possess both folate or pteroate binding properties and enzymatic activities of their amino terminal portion, suggesting that the N-terminal domain determines the folate substrate specificity. Recent structural studies have identified two unique folate binding sites, the omega loop in L. casei FPGS and the dihydropteroate binding loop in the E. coli enzyme. Mutants with swapped omega loops retained the activities and folate or pteroate binding properties of the rest of the enzyme. Mutating L. casei FPGS to contain an E. coli FPGS dihydropteroate binding loop did not alter its substrate specificity to using dihydropteroate as a substrate. The mutant D154A, a residue specific for the dihydropteroate binding site in E. coli FPGS, and D151A, the corresponding mutant in the L. casei enzyme, were both defective in using tetrahydrofolate as their substrate, suggesting that the binding site corresponding to the E. coli pteroate binding site is also the tetrahydrofolate binding site for both enzymes. Tetrahydrofolate diglutamate was a slightly less effective substrate than the monoglutamate with the wild-type enzyme but was a 40-fold more effective substrate with the D151A mutant. This suggests that the 5,10-methylenetetrahydrofolate binding site identified in the L. casei ternary structure may bind diglutamate and polyglutamate folate derivatives.     

Kinetic and crystallographic analysis of mutant Escherichia coli aminopeptidase P: insights into substrate recognition and the mechanism of catalysis

Aminopeptidase P (APPro) is a manganese-dependent enzyme that cleaves the N-terminal amino acid from polypeptides where the second residue is proline. APPro shares a similar fold, substrate specificity, and catalytic mechanism with methionine aminopeptidase and prolidase. To investigate the roles of conserved residues at the active site, seven mutant forms of APPro were characterized kinetically and structurally. Mutation of individual metal ligands selectively abolished binding of either or both Mn(II) atoms at the active site, and none of these metal-ligand mutants had detectable catalytic activity. Mutation of the conserved active site residues His243 and His361 revealed that both are required for catalysis. We propose that His243 stabilizes substrate binding through an interaction with the carbonyl oxygen of the requisite proline residue of a substrate and that His361 stabilizes substrate binding and the gem-diol catalytic intermediate. Sequence, structural, and kinetic analyses reveal that His350, conserved in APPro and prolidase but not in methionine aminopeptidase, forms part of a hydrophobic binding pocket that gives APPro its proline specificity. Further, peptides in which the required proline residue is replaced by N-methylalanine or alanine are cleaved by APPro, but they are extremely poor substrates due to a loss of interactions between the prolidyl ring of the substrate and the hydrophobic proline-binding pocket.     

A structural element that facilitates proton-coupled electron transfer in oxalate decarboxylase

The conformational properties of an active-site loop segment, defined by residues Ser(161)-Glu(162)-Asn(163)-Ser(164), have been shown to be important for modulating the intrinsic reactivity of Mn(II) in the active site of Bacillus subtilis oxalate decarboxylase. We now detail the functional and structural consequences of removing a conserved Arg/Thr hydrogen-bonding interaction by site-specific mutagenesis. Hence, substitution of Thr-165 by a valine residue gives an OxDC variant (T165V) that exhibits impaired catalytic activity. Heavy-atom isotope effect measurements, in combination with the X-ray crystal structure of the T165V OxDC variant, demonstrate that the conserved Arg/Thr hydrogen bond is important for correctly locating the side chain of Glu-162, which mediates a proton-coupled electron transfer (PCET) step prior to decarboxylation in the catalytically competent form of OxDC. In addition, we show that the T165V OxDC variant exhibits a lower level of oxalate consumption per dioxygen molecule, consistent with the predictions of recent spin-trapping experiments [Imaram et al. (2011) Free Radicals Biol. Med. 50, 1009-1015]. This finding implies that dioxygen might participate as a reversible electron sink in two putative PCET steps and is not merely used to generate a protein-based radical or oxidized metal center.     

Isothermal titration calorimetry uncovers substrate promiscuity of bicupin oxalate oxidase from Ceriporiopsis subvermispora

Isothermal titration calorimetry (ITC) may be used to determine the kinetic parameters of enzyme-catalyzed reactions when neither products nor reactants are spectrophotometrically visible and when the reaction products are unknown. We report here the use of the multiple injection method of ITC to characterize the catalytic properties of oxalate oxidase (OxOx) from Ceriporiopsis subvermispora (CsOxOx), a manganese dependent enzyme that catalyzes the oxygen-dependent oxidation of oxalate to carbon dioxide in a reaction coupled with the formation of hydrogen peroxide. CsOxOx is the first bicupin enzyme identified that catalyzes this reaction. The multiple injection ITC method of measuring OxOx activity involves continuous, real-time detection of the amount of heat generated (dQ) during catalysis, which is equal to the number of moles of product produced times the enthalpy of the reaction (ΔH_app). Steady-state kinetic constants using oxalate as the substrate determined by multiple injection ITC are comparable to those obtained by a continuous spectrophotometric assay in which H₂O₂ production is coupled to the horseradish peroxidase-catalyzed oxidation of 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid) and by membrane inlet mass spectrometry. Additionally, we used multiple injection ITC to identify mesoxalate as a substrate for the CsOxOx-catalyzed reaction, with a kinetic parameters comparable to that of oxalate, and to identify a number of small molecule carboxylic acid compounds that also serve as substrates for the enzyme.     

Cloning and sequencing of two Ceriporiopsis subvermispora bicupin oxalate oxidase allelic isoforms: implications for the reaction specificity of oxalate oxidases and decarboxylases

Oxalate oxidase is thought to be involved in the production of hydrogen peroxide for lignin degradation by the dikaryotic white rot fungus Ceriporiopsis subvermispora. This enzyme was purified, and after digestion with trypsin, peptide fragments of the enzyme were sequenced using quadrupole time-of-flight mass spectrometry. Starting with degenerate primers based on the peptide sequences, two genes encoding isoforms of the enzyme were cloned, sequenced, and shown to be allelic. Both genes contained 14 introns. The sequences of the isoforms revealed that they were both bicupins that unexpectedly shared the greatest similarity to microbial bicupin oxalate decarboxylases rather than monocupin plant oxalate oxidases (also known as germins). We have shown that both fungal isoforms, one of which was heterologously expressed in Escherichia coli, are indeed oxalate oxidases that possess < or =0.2% oxalate decarboxylase activity and that the organism is capable of rapidly degrading exogenously supplied oxalate. They are therefore the first bicupin oxalate oxidases to have been described. Heterologous expression of active enzyme was dependent on the addition of manganese salts to the growth medium. Molecular modeling provides new and independent evidence for the identity of the catalytic site and the key amino acid involved in defining the reaction specificities of oxalate oxidases and oxalate decarboxylases.     

Isocitrate binding at two functionally distinct sites in yeast NAD+-specific isocitrate dehydrogenase

Yeast NAD(+)-specific isocitrate dehydrogenase (IDH) is an octamer containing two types of homologous subunits. Ligand-binding analyses were conducted to examine effects of residue changes in putative catalytic and regulatory isocitrate-binding sites respectively contained in IDH2 and IDH1 subunits. Replacement of homologous serine residues in either subunit site, S98A in IDH2 or S92A in IDH1, was found to reduce by half the total number of holoenzyme isocitrate-binding sites, confirming a correlation between detrimental effects on isocitrate binding and respective kinetic defects in catalysis and allosteric activation by AMP. Replacement of both serine residues eliminates isocitrate binding and measurable catalytic activity. The putative isocitrate-binding sites of IDH1 and IDH2 contain five identical and four nonidentical residues. Reciprocal replacement of the four nonidentical residues in either or both subunits (A108R, F136Y, T241D, and N245D in IDH1 and/or R114A, Y142F, D248T, and D252N in IDH2) was found to be permissive for isocitrate binding. This provides further evidence for two types of binding sites in IDH, although the authentic residues have been shown to be necessary for normal kinetic contributions. Finally, the mutant enzymes with residue replacements in the IDH1 site were found to be unable to bind AMP, suggesting that allosteric activation is dependent both upon binding of isocitrate at the IDH1 site and upon the changes in the enzyme normally elicited by this binding.     

Functional consequences of substitution of the active site (phospho)histidine residue of Escherichia coli succinyl-CoA synthetase

Succinyl-CoA synthetase (EC 6.2.1.5, succinate: CoA ligase (ADP-forming)) of Escherichia coli is an α₂β₂ tetramer, with the active site believed to be located at the point of contact between the two subunit types. It has been previously established that the reaction involves the intermediate participation of a phosphorylated enzyme form in the process of catalysis. The site of phosphorylation (His-246) and the binding sites for the substrates ADP and ATP are located in the α subunit, and the succinate and CoA binding sites are in β. A mutant form of this enzyme, with the active site histidine residue replaced by aspartate, has been produced in large quantities and purified to homogeneity. This form appears to be indistinguishable from the native enzyme with respect to its subunit assembly, but has no ability to catalyze the overall reaction. As expected, the His-246 α →Asp mutant is incapable of undergoing phosphorylation. We have developed an assay based upon the arsenolysis of succinyl-CoA that effectively isolates the partial reaction that occurs in the portion of the active site contributed by the β subunit; this reaction does not involve covalent participation of His-246 α. We have found that the His-246 α →Asp mutant is also devoid of activity in this arsenolysis reaction, indicating that an intact His-246 α is required for the establishment of the microenvironment in this portion of the active site that is required for the corresponding step of the overall reaction.     

Oxalate decarboxylase uses electron hole hopping for catalysis

The hexameric low-pH stress response enzyme oxalate decarboxylase catalyzes the decarboxylation of the oxalate mono-anion in the soil bacterium Bacillus subtilis. A single protein subunit contains two Mn-binding cupin domains, and catalysis depends on Mn(III) at the N-terminal site. The present study suggests a mechanistic function for the C-terminal Mn as an electron hole donor for the N-terminal Mn. The resulting spatial separation of the radical intermediates directs the chemistry toward decarboxylation of the substrate. A π-stacked tryptophan pair (W96/W274) links two neighboring protein subunits together, thus reducing the Mn-to-Mn distance from 25.9 Å (intrasubunit) to 21.5 Å (intersubunit). Here, we used theoretical analysis of electron hole-hopping paths through redox-active sites in the enzyme combined with site-directed mutagenesis and X-ray crystallography to demonstrate that this tryptophan pair supports effective electron hole hopping between the C-terminal Mn of one subunit and the N-terminal Mn of the other subunit through two short hops of ∼8.5 Å. Replacement of W96, W274, or both with phenylalanine led to a large reduction in catalytic efficiency, whereas replacement with tyrosine led to recovery of most of this activity. W96F and W96Y mutants share the wildtype tertiary structure. Two additional hole-hopping networks were identified leading from the Mn ions to the protein surface, potentially protecting the enzyme from high Mn oxidation states during turnover. Our findings strongly suggest that multistep hole-hopping transport between the two Mn ions is required for enzymatic function, adding to the growing examples of proteins that employ aromatic residues as hopping stations.     

Interlobe communication in multiple calcium-binding site mutants of Drosophila calmodulin.

We have generated mutants of Drosophila calmodulin in which pairs of calcium-binding sites are mutated so as to prevent calcium binding. In all sites, the mutation involves replacement of the -Z position glutamate residue with glutamine. Mutants inactivated in both N-terminal sites (B12Q) or both C-terminal sites (B34Q), and two mutants with one N- and one C-terminal site inactivated (B13Q and B24Q) were generated. The quadruple mutant with all four sites mutated was also studied. UV-difference spectroscopy and near-UV CD were used to examine the influence of these mutations upon the single tyrosine (Tyr-138) of the protein. These studies uncovered four situations in which Tyr-138 in the C-terminal lobe responds to a change to the calcium-binding properties of the N-terminal lobe. Further, they suggest that N-terminal calcium-binding events contribute strongly to the aberrant behavior of Tyr-138 seen in mutants with a single functional C-terminal calcium-binding site. The data also indicate that loss of calcium binding at site 1 adjusts the aberrant conformation of Tyr-138 produced by mutation of site 3 toward the wild-type structure. However, activation studies for skeletal muscle myosin light chain kinase (SK-MLCK) established that all of the multiple binding site mutants are poor activators of SK-MLCK. Thus, globally, the calcium-induced conformation of B13Q is not closer to wild type than that of either the site 1 or the site 3 mutant. The positioning of Tyr-138 within the crystal structure of calmodulin suggests that effects of the N-terminal lobe on this residue may be mediated via changes to the central linker region of the protein.     

Structure of oxalate decarboxylase from Bacillus subtilis at 1.75 A resolution

Oxalate decarboxylase is a manganese-dependent enzyme that catalyzes the conversion of oxalate to formate and carbon dioxide. We have determined the structure of oxalate decarboxylase from Bacillus subtilis at 1.75 A resolution in the presence of formate. The structure reveals a hexamer with 32-point symmetry in which each monomer belongs to the cupin family of proteins. Oxalate decarboxylase is further classified as a bicupin because it contains two cupin folds, possibly resulting from gene duplication. Each oxalate decarboxylase cupin domain contains one manganese binding site. Each of the oxalate decarboxylase domains is structurally similar to oxalate oxidase, which catalyzes the manganese-dependent oxidative decarboxylation of oxalate to carbon dioxide and hydrogen peroxide. Amino acid side chains in the two metal binding sites of oxalate decarboxylase and the metal binding site of oxalate oxidase are very similar. Four manganese binding residues (three histidines and one glutamate) are conserved as well as a number of hydrophobic residues. The most notable difference is the presence of Glu333 in the metal binding site of the second cupin domain of oxalate decarboxylase. We postulate that this domain is responsible for the decarboxylase activity and that Glu333 serves as a proton donor in the production of formate. Mutation of Glu333 to alanine reduces the catalytic activity by a factor of 25. The function of the other domain in oxalate decarboxylase is not yet known.     

Immobilization of Bacillus subtilis oxalate decarboxylase on a Zn-IMAC resin

Oxalate decarboxylase, a bicupin enzyme coordinating two essential manganese ions per subunit, catalyzes the decomposition of oxalate into carbon dioxide and formate in the presence of oxygen. Current efforts to elucidate its catalytic mechanism are focused on EPR studies of the Mn. We report on a new immobilization strategy linking the enzyme's N-terminal His₆-tag to a Zn-loaded immobilized metal affinity resin. Activity is lowered somewhat due to the expected crowding effect. High-field EPR spectra of free and immobilized enzyme show that the resin affects the coordination environment of the active site Mn ions only minimally. The immobilized preparation was used to study the effect of varying pH on the same sample. Repeated freeze-thaw cycles lead to break down of the resin beads and some enzyme loss from the sample. However, the EPR signal increases due to higher packing efficiency on the sample column.     

Effect of the Met344His mutation on the conformational dynamics of bovine beta-1,4-galactosyltransferase: crystal structure of the Met344His mutant in complex with chitobiose

Beta-1,4-galactosyltransferase (beta4Gal-T1) in the presence of manganese ion transfers galactose from UDP-galactose (UDP-Gal) to N-acetylglucosamine (GlcNAc) that is either free or linked to an oligosaccharide. Crystallographic studies on bovine beta4Gal-T1 have shown that the primary metal binding site is located in the hinge region of a long flexible loop, which upon Mn(2+) and UDP-Gal binding changes from an open to a closed conformation. This conformational change creates an oligosaccharide binding site in the enzyme. Neither UDP nor UDP analogues efficiently induce these conformational changes in the wild-type enzyme, thereby restricting the structural analysis of the acceptor binding site. The binding of Mn(2+) involves an uncommon coordination to the Sdelta atom of Met344; when it is mutated to His, the mutant M344H, in the presence of Mn(2+) and UDP-hexanolamine, readily changes to a closed conformation, facilitating the structural analysis of the enzyme bound with an oligosaccharide acceptor. Although the mutant M344H loses 98% of its Mn(2+)-dependent activity, it exhibits 25% of its activity in the presence of Mg(2+). The crystal structures of M344H-Gal-T1 in complex with either UDP-Gal.Mn(2+) or UDP-Gal.Mg(2+), determined at 2.3 A resolution, show that the mutant enzyme in these complexes is in a closed conformation, and the coordination stereochemistry of Mg(2+) is quite similar to that of Mn(2+). Although either Mn(2+) or Mg(2+), together with UDP-Gal, binds and changes the conformation of the M344H mutant to the closed one, it is the Mg(2+) complex that engages efficiently in catalyses. Thus, this property enabled us to crystallize the M344H mutant for the first time with the acceptor substrate chitobiose in the presence of UDP-hexanolamine and Mn(2+). The crystal structure determined at 2.3 A resolution reveals that the GlcNAc residue at the nonreducing end of chitobiose makes extensive hydrophobic interactions with the highly conserved Tyr286 residue.     

Crystal structure of 3-hydroxyanthranilic acid 3,4-dioxygenase from Saccharomyces cerevisiae: a special subgroup of the type III extradiol dioxygenases

3-Hydroxyanthranilic acid 3,4-dioxygenase (3HAO) is a non-heme ferrous extradiol dioxygenase in the kynurenine pathway from tryptophan. It catalyzes the conversion of 3-hydroxyanthranilate (HAA) to quinolinic acid (QUIN), an endogenous neurotoxin, via the activation of N-methyl-D-aspartate (NMDA) receptors and the precursor of NAD(+) biosynthesis. The crystal structure of 3HAO from S. cerevisiae at 2.4 A resolution shows it to be a member of the functionally diverse cupin superfamily. The structure represents the first eukaryotic 3HAO to be resolved. The enzyme forms homodimers, with two nickel binding sites per molecule. One of the bound nickel atoms occupies the proposed ferrous-coordinated active site, which is located in a conserved double-strand beta-helix domain. Examination of the structure reveals the participation of a series of residues in catalysis different from other extradiol dioxygenases. Together with two iron-binding residues (His49 and Glu55), Asp120, Asn51, Glu111, and Arg114 form a hydrogen-bonding network; this hydrogen-bond network is key to the catalysis of 3HAO. Residues Arg101, Gln59, and the substrate-binding hydrophobic pocket are crucial for substrate specificity. Structure comparison with 3HAO from Ralstonia metallidurans reveals similarities at the active site and suggests the same catalytic mechanism in prokaryotic and eukaryotic 3HAO. Based on sequence comparison, we suggest that bicupin of human 3HAO is the first example of evolution from a monocupin dimer to bicupin monomer in the diverse cupin superfamilies. Based on the model of the substrate HAA at the active site of Y3HAO, we propose a mechanism of catalysis for 3HAO.     

Two distinct regions of cyclophilin B are involved in the recognition of a functional receptor and of glycosaminoglycans on T lymphocytes

Cyclophilin B is a cyclosporin A-binding protein exhibiting peptidyl-prolyl cis/trans isomerase activity. We have previously shown that it interacts with two types of binding sites on T lymphocytes. The type I sites correspond to specific functional receptors and the type II sites to sulfated glycosaminoglycans. The interactions of cyclophilin B with type I and type II sites are reduced in the presence of cyclosporin A and of a synthetic peptide mimicking the N-terminal part of cyclophilin B, respectively, suggesting that the protein possesses two distinct binding regions. In this study, we intended to characterize the areas of cyclophilin B involved in the interactions with binding sites present on Jurkat cells. The use of cyclophilin B mutants modified in the N-terminal region demonstrated that the 3Lys-Lys-Lys5 and 14Tyr-Phe-Asp16 clusters are probably solely required for the interactions with the type II sites. We further engineered mutants of the conserved central core of cyclophilin B, which bears the catalytic and the cyclosporin A binding sites as an approach to localize the binding regions for the type I sites. The enzymatic activity of cyclophilin B was dramatically reduced after substitution of the Arg62 and Phe67 residues, whereas the cyclosporin A binding activity was destroyed by mutation of the Trp128 residue and strongly decreased after modification of the Phe67 residue. Only the substitution of the Trp128 residue reduced the binding of the resulting cyclophilin B mutant to type I binding sites. The catalytic site of cyclophilin B therefore did not seem to be essential for cellular binding and the cyclosporin A binding site appeared to be partially involved in the binding to type I sites.     

Structural insights into the mechanism of nuclease A, a betabeta alpha metal nuclease from Anabaena

Nuclease A (NucA) is a nonspecific endonuclease from Anabaena sp. capable of degrading single- and double-stranded DNA and RNA in the presence of divalent metal ions. We have determined the structure of the delta(2-24),D121A mutant of NucA in the presence of Zn2+ and Mn2+ (PDB code 1ZM8). The mutations were introduced to remove the N-terminal signal peptide and to reduce the activity of the nonspecific nuclease, thereby reducing its toxicity to the Escherichia coli expression system. NucA contains a betabeta alpha metal finger motif and a hydrated Mn2+ ion at the active site. Unexpectedly, NucA was found to contain additional metal binding sites approximately 26 A apart from the catalytic metal binding site. A structural comparison between NucA and the closest analog for which structural data exist, the Serratia nuclease, indicates several interesting differences. First, NucA is a monomer rather than a dimer. Second, there is an unexpected structural homology between the N-terminal segments despite a poorly conserved sequence, which in Serratia includes a cysteine bridge thought to play a regulatory role. In addition, although a sequence alignment had suggested that NucA lacks a proposed catalytic residue corresponding to Arg57 in Serratia, the structure determined here indicates that Arg93 in NucA is positioned to fulfill this role. Based on comparison with DNA-bound nuclease structures of the betabeta alpha metal finger nuclease family and available mutational data on NucA, we propose that His124 acts as a catalytic base, and Arg93 participates in the catalysis possibly through stabilization of the transition state.     

Differences in the specificities of the highly alkalophilic proteinases Savinase and Esperase imposed by changes in the rigidity and geometry of the substrate binding sites

Savinase and Esperase are closely related highly alkalophilic proteinases produced by Bacillus lentus. They are suitable couple for investigating the structural basis of proteinase specificity due to the identity of the catalytic and the differences in the substrate binding sites. Two of the substitutions in these sites are very important: T129P and G131P. The two prolines provide an extra rigidity of the Savinase-binding site. The substitutions S166N and Q191T in the S1 recognition loop change the binding geometry of the substrate P1 residue. The geometry of S1 in Esperase is more favorable for binding and catalysis in comparison to that in Savinase. Differences in P3 specificity are probably created by the substitution V104L, which influences the conformation of S3. Leu in position 104 is more favorable for the binding of Phe to S4 than Val. The lower affinity and catalytic efficiency as well as more narrow proteolytic specificity of Savinase in comparison to those of Esperase are explained with the extra rigidity and unfavorable changes in geometry of the substrate binding site of the first enzyme.     

The identity of the active site of oxalate decarboxylase and the importance of the stability of active-site lid conformations

Oxalate decarboxylase (EC 4.1.1.2) catalyses the conversion of oxalate into carbon dioxide and formate. It requires manganese and, uniquely, dioxygen for catalysis. It forms a homohexamer and each subunit contains two similar, but distinct, manganese sites termed sites 1 and 2. There is kinetic evidence that only site 1 is catalytically active and that site 2 is purely structural. However, the kinetics of enzymes with mutations in site 2 are often ambiguous and all mutant kinetics have been interpreted without structural information. Nine new site-directed mutants have been generated and four mutant crystal structures have now been solved. Most mutants targeted (i) the flexibility (T165P), (ii) favoured conformation (S161A, S164A, D297A or H299A) or (iii) presence (Delta162-163 or Delta162-164) of a lid associated with site 1. The kinetics of these mutants were consistent with only site 1 being catalytically active. This was particularly striking with D297A and H299A because they disrupted hydrogen bonds between the lid and a neighbouring subunit only when in the open conformation and were distant from site 2. These observations also provided the first evidence that the flexibility and stability of lid conformations are important in catalysis. The deletion of the lid to mimic the plant oxalate oxidase led to a loss of decarboxylase activity, but only a slight elevation in the oxalate oxidase side reaction, implying other changes are required to afford a reaction specificity switch. The four mutant crystal structures (R92A, E162A, Delta162-163 and S161A) strongly support the hypothesis that site 2 is purely structural.     

A "helix-scissors" mechanism for the hinge-bending conformational change in phosphoglycerate kinase

X-ray studies of phosphoglycerate kinase (EC 2.7.2.3, PGK) have shown that the enzyme's single polypeptide chain is organized into two separate domains that correspond to the N- and C-terminal halves of the chain. Substrate binding studies and the incorporation of the complete amino acid sequence of horse-muscle PGK into its X-ray model suggest that the C-domain is an ADP/ATP binding unit and that the N-terminal domain contains the phosphoglycerate binding site and the active site located in a prominent cluster of positively charged residues. Because the distance between these two sites is 12-15 A, a hinge-bending of 10 degrees--20 degrees has been proposed to bring the two sites together for catalysis. Independent solution studies of yeast PGK have shown that the radius of gyration decreases significantly on the formation of the ternary complex. This change has been interpreted in terms of a 9 degrees--12 degrees rotation about a hinge in the interdomain region that brings the two domains together. We suggest here a structural basis for the proposed hinge-bending that involves the rotation of the two helices that form the domain interface about their contact normal carrying their respective domains with them.