Extraction of bovine serum albumin using nanoparticulate reverse micelles

The extraction of a relatively large molecular weight protein, bovine serum albumin (BSA), using nano-sized reverse micelles of nonionic surfactant polyoxyethylene p-t-octylphenol (Triton-X-100) is attempted for the first time. Suitability of reverse micelles of anionic surfactant sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and Triton-X-100/AOT mixture in organic solvent toluene for BSA extraction is also investigated. Although, the size of the Triton-X-100 reverse micelle in toluene is large enough to host BSA molecule in the hydraulic core, the overall extraction efficiency is found to be low, which may be due to lack of strong driving force. AOT/toluene system resulted in complete forward extraction at aqueous pH 5.5 and a surfactant concentration of 160 mM. The back extraction with aqueous phase (pH 5.5) resulted in 100% extraction of BSA from the organic phase. The addition of Triton-X-100 to AOT reduced the extraction efficiency of AOT reverse micelles, which may be attributed to reduced hydrophobic interaction. The circular dichroism (CD) spectrum of BSA extracted using AOT/toluene reverse micelles indicated the structural stability of the protein extracted.     

Impact of Surface Active Compounds on Iron Catalyzed Oxidation of Methyl Linolenate in AOT–Water–Hexadecane Systems

Edible oils contain minor surface active components that form micro-heterogeneous environments, such as reverse micelles, which can alter the rate and direction of chemical reactions. However, little is known about the role of these micro-heterogeneous environments on lipid oxidation of bulk oil. Our objective was to evaluate the ability of water, cumene hydroperoxide, oleic acid, and phosphatidylcholine to influence the structure of reverse micelles in a model oil system: sodium bis(2-ethylhexyl) sulfosuccinate (aerosol-OT; AOT) in n-hexadecane. The influence of reverse micelle structure on iron catalyzed lipid oxidation was determined using methyl linolenate as an oxidizable substrate. The size and shape of the reverse micelle were investigated by small-angle x-ray scattering, and water contents was determined by Karl Fischer titrations. Lipid hydroperoxides and thiobarbituric acid reactive substances were used to follow lipid oxidation. Our results showed that AOT formed spherical reverse micelles in hexadecane. The size of the reverse micelles increased with increased water or phosphatidylcholine concentration, but decreased upon addition of cumene hydroperoxide or oleic acid. Iron catalyzed oxidation of methyl linolenate in the reverse micelle system decreased with increasing water concentration. Addition of phosphatidylcholine into the reverse micelle systems decreased methyl linolenate oxidation compared to control and reverse micelles with added oleic acid. These results indicate that water, cumene hydroperoxide, oleic acid, and phosphatidylcholine can alter reverse micelle size and lipid oxidation rates. Understanding how these compounds influence reverse micelle structure and lipid oxidation rates could provide information on how to modify bulk oil systems to increase oxidative stability.     

Use of reverse micelles in membrane protein structural biology

Membrane protein structural biology is a rapidly developing field with fundamental importance for elucidating key biological and biophysical processes including signal transduction, intercellular communication, and cellular transport. In addition to the intrinsic interest in this area of research, structural studies of membrane proteins have direct significance on the development of therapeutics that impact human health in diverse and important ways. In this article we demonstrate the potential of investigating the structure of membrane proteins using the reverse micelle forming surfactant dioctyl sulfosuccinate (AOT) in application to the prototypical model ion channel gramicidin A. Reverse micelles are surfactant based nanoparticles which have been employed to investigate fundamental physical properties of biomolecules. The results of this solution NMR based study indicate that the AOT reverse micelle system is capable of refolding and stabilizing relatively high concentrations of the native conformation of gramicidin A. Importantly, pulsed-field-gradient NMR diffusion and NOESY experiments reveal stable gramicidin A homodimer interactions that bridge reverse micelle particles. The spectroscopic benefit of reverse micelle-membrane protein solubilization is also explored, and significant enhancement over commonly used micelle based mimetic systems is demonstrated. These results establish the effectiveness of reverse micelle based studies of membrane proteins, and illustrate that membrane proteins solubilized by reverse micelles are compatible with high resolution solution NMR techniques. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Improvement in extraction and catalytic activity of Mucor javanicus lipase by modification of AOT reverse micelle

Reverse micelles are formed in apolar solvents by spontaneous aggregation of surfactants. Surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) is most often used for the reverse micellar extraction of enzymes. However, the inactivation of enzyme due to strong interaction with AOT molecules is a severe problem. To overcome this problem, the AOT/water/isooctane reverse micellar system was modified by adding short chain polyethylene glycol 400 (PEG 400). The modified AOT reverse micellar system was used to extract Mucor javanicus lipase from the aqueous phase to the reverse micellar phase. The extraction efficiency (E) increased with the increase in PEG 400 addition and the maximum E in PEG 400 modified system was twofold higher than that in the PEG 400-free system. Upon addition of PEG 400, the water activity (a(w)) of aqueous phase decreased, whereas a(w) of reverse micellar phase increased. The circular dichroism spectroscopy analysis revealed that PEG 400 changes the secondary and tertiary structure of lipase. The maximum specific activity of lipase extracted in PEG 400-modified reverse micellar system was threefold higher than that in the PEG-free system.     

Effect of hydration degree of aerosol OT reversed micelles and surfactant concentration in heptane on spectral and catalytic properties of catalase.

The influence of micelle hydration degree (w0) and AOT concentration on fluorescence, circular dichroism (CD), catalytic activity, and stability of catalase in Aerosol OT (AOT) reversed micelles in heptane was investigated. The quantitative parameters--differential fluorescence of catalase (DeltaI), protein molar ellipticity ([theta]lambda), initial rate of catalytic reaction, catalase efficiency (kcat/Km), and rate constant of enzyme inactivation (kin, sec-1)--decreased with increasing AOT concentration in micellar systems, reflecting the interaction of solubilized catalase with the AOT micellar aggregates in heptane. The dependences of all these parameters on increasing hydration degree of micelles (w0) were characterized by the appearance of maxima at w0 of 8, 15-18, and 26-30. These maxima are suggested to reflect three different states of catalase in the micellar system, distinguished by their conformations and catalytic activity, which is determined by the micellar microenvironment of the enzyme.     

Enzyme-Catalyzed oxidation of cholesterol in physically characterized water-in-oil microemulsions

The enzymatic conversion of cholesterol to cholestenone by cholesterol oxidase (Brevibacterium sp.)in reversed micelles in a system composed of AOT/isooctane/water/cholesterol has been examined. The catalytic activity of the enzyme was correlated with the physicochemical properties of water in water-in-oil (w/o) microemulsion systems. In a system consisting of 3 wt % AOT in isooctane, reversed micelles started to form as the [H(2)O]/[AOT] (e.g., the w(0)) ratio increased above 4-5. The formation of reversed micelles with a core of neat (bulk) water was verified from determinations of both the partial molar volume of water and the scissors vibration of water [with Fourier transform infrared (FTIR) spectroscopy] in the w/o microemulsion systems. A plot of enzyme activity vs. w(0) indicated that the hydration of enzyme molecules per se was not sufficient to give rise to catalytic activity. Instead, it appeared that the formation of an aqueous micellar core was necessary for full activation of the enzyme. Based on micelle size distribution analysis, it was estimated that about one micelle per one thousand contained an enzyme molecule. Since the apparent reaction rate could be markedly enhanced by increasing the enzyme/water ratio, we conclude that the number of enzyme-containing micelles was an important rate-limiting factor in the system.     

Relaxation phenomena in systems of protein-containing reverse micelles of surfactants in organic solvents

The research was aimed to establish the equilibrium processes in protein-containing systems of AOT reverse micelles in octane. As chromophore label for tracing the kinetics of the process, the acid-base indicator, p-nitrophenol, was used. The establishing of the equilibrium in the reverse micelle system notably decelerated in the presence of a solubilized protein (native and stearoylated alpha-chymotrypsin). During the establishing of the equilibrium, the solubilized enzyme can be irreversibly inactivated. The level of the residual activity of the enzyme in the equilibrium system depended on the procedure of micellar system preparation. The methods have been offered to set up the equilibrium in the reverse micelle system without inactivation of the solubilized enzyme.     

Catalytic activity of lignin peroxidase and partition of veratryl alcohol in AOT/isooctane/toluene/water reverse micelles

The activity of lignin peroxidase (LiP) and the partition of its optimum substrate veratryl alcohol (VA) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane/toluene/water reverse micelles were studied in this paper to understand the microheterogeneous effect of the medium on the catalytic properties of LiP hosted in the reverse micelle. Results showed that LiP from Phanerochaete chrysosporium could express its activity in the reverse micelles, but its activity depended, to a great extent, on the composition of the reverse micelles. Optimum activity occurred at a molar ratio of water to AOT (ω₀) of 11, a pH value of 3.6, and a volume ratio of isooctane to toluene of 7–9. Under optimum conditions, the half-life of LiP was circa 12 h. The dependence of LiP activity on the volume fraction of water in the medium (θ), at a constant ω₀ value of 11, indicated that VA was mainly solubilized in the pseudophase of the reverse micelle. Based on the pseudobiphasic model and the corresponding kinetic method, a linear line can be obtained in a plot of apparent Michaelis constant of VA vs θ, and the partition coefficient of VA between the pseudophase and the organic solvent phase was determined to be 35.8, which was higher than that (22.3) between bulk water and the corresponding mixed organic solvent. H₂O₂ inhibited LiP at concentrations higher than 80 μM; this concentration value seems to be different from that in aqueous solution (about 3 mM). The differences mentioned above should be ascribed to the microheterogeneity and the interface of the AOT reverse micelle.     

Antimicrobial activity of AOT-isooctane reverse micelle as a bioseparation and biocatalysis tool

Abstract

The antimicrobial activity of different reverse micelles on microorganisms is been compared using the disc diffusion method. The bis (2-ethylhexyl) sodium sulfosuccinate (AOT) reverse micelle showed a more significant inhibitory effect than do other reverse. micelles, and it had an antimicrobial activity against a broad range of microorganisms. Results from an antimicrobial activity test of isooctane and a forward extraction containing soybean protein suggest that the surfactant was chiefly responsible for inhibiting microbes in AOT/isooctane reverse micelle, while isooctane hardly inhibited the microbial growth. The properties of S. aureus, cultured in the TSB with AOT reverse micellar solution, were identified by the SEM and SDS-PAGE fingerprinting of cell-wall proteins. It is concluded that the cell-wall of the S. aureus decreased in the TSB with AOT reverse micellar solution, and some cell protein subunits of the S. aureus did not occurr, especially between 14.4 and 42.7 kDa, while one new protein subunit at near 97.4 kDa occurred     

Higher order structure of Mucor miehei lipase and micelle size in cetyltrimethylammonium bromide reverse micellar system

The higher order structure of Mucor miehei lipase and micelle size in a cationic cetyltrimethylammonium bromide (CTAB) reverse micellar system was investigated. Circular dichroic (CD) measurement revealed that the lipase far-UV CD spectra changed markedly, going from buffer solution to the reverse micellar solution, and were very similar for any organic solvent used. The ellipticity of the solubilized lipase in the far-UV region markedly decreased with increasing water content (W(0): molar ratio of water to CTAB), indicating that the secondary structure of lipase changed with the water content. The linear correlation between the W(0) and the micelle size was obtained by measuring dynamic light scattering. From the linear correlation between the micelle size and W(0), the higher order structure of the solubilized lipase appears to be affected directly by the micellar interface. The species and concentration of alcohol as a cosurfactant had an inferior effect on lipase structure. Especially, at ratios of 1-pentanol to CTAB of less than 8, the secondary and tertiary structures of lipase were preserved in the reverse micelles. The CTAB concentration had little effect on the lipase structure in the micelles. The catalytic activity of the lipase solubilized in the CTAB reverse micelles increased with increasing the W(0).     

Solubilization of soybean mitochondria in AOT/isooctane water-in-oil microemulsions

The water-in-oil microemulsion system bis(2 ethyl-hexyl-sodium-succinate (AOT)/isooctane/water is able to solubilize soybean nodules mitrochrondria. Transparent and thermodynamically stable hydrocarbon solutions are obtained, which can be assayed for mitochondrial activity just as aqueous solutions. Malate dehydrogenase (MDH) activity was measured in vivo and gave in reverse micelles very similar results as in water. However the kinetic behavior of this reaction in AOT/isooctane reverse micelles shows some differences with respect to water. Mitochondria in reverse AOT micelles are able to retain about 70% of their initial MDH activity after three days. Mitochondria can be back-transferred from reverse micelles to water and show respiratory activity almost identical to the native organelles. Electron microscopy studies show that the dimensions of mitochondria back-transferred into water from AOT micelles are comparable to the dimensions of the native organelles.     

Solubilizing water involved in protein extraction using reversed micelles

The extraction of protein using reversed micelles was investigated in relation to the amount of solubilizing water in the reversed micellar organic phase. The minimal concentration of amphiphilic molecule di-2-ethylhexyl sodium sulfosuccinate (C(20)H(37)O(7)Na) (AOT) required for 100% cytochrome c extraction was recognized. This critical AOT concentration increased with protein concentration in the aqueous phase. On this minimal AOT condition, the molar ratio of solubilizing water to extracted protein was found to be a constant of 3500 under C(KCI) = 1.0 x 10(2) mol . m(-3) in this system. This ratio means the hydrophillic surroundings required for extracting one protein molecule into the micellar organic phase under the suitable pH and salt concentration for the forward extraction. In this regard, AOT molecules seemed to take the part of water solubilizing agent in the reversed micellar extraction. This role of AOT is important to extract protein under the suitable pH and salt concentration. The amount of solubilizing water in the protein-containing system was larger than in the protein-free system. This difference shows that the water molecules accompany the extracted protein into the reversed micellar organic phase at constant ratio 2200 under C(KCI) = 1.0 x 10(2) mol . m(-3), i.e., accompanying water molecules per one extracted protein. The minimal AOT concentration increased with ionic strength. On this minimal AOT condition, the molar ratio of solubilizing water to extracted protein also increased with ionic strength, so that in higher ionic strength, more solubilizing water was required. Then more AOT was required to provide the hydrophillic surroundings for protein. The pH affected the minimal AOT concentration required for 100% protein extraction.     

Membrane proteins in reverse micelles: myelin basic protein in a membrane-mimetic environment

The solubility, reactivity, and conformational dynamics of myelin basic protein (MBP) from bovine brain were studied in reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate (AOT)-isooctane and water. Such a membrane-mimetic system resembles the aqueous spaces of native myelin sheath in terms of physicochemical properties as reflected in the high affinity of MBP for interfacial bound water. This is marked by the unusual profile of the solubility curve of the protein in reverse micelles, which shows optimal solubility at a much lower molar ratio of water to surfactant ([ H2O]/[AOT] = w0) than that reported for other water-soluble proteins. The role of counterions and/or charged polar head groups in the solubilization process is revealed by comparison of the solubility of MBP in nonionic surfactant micellar solutions. Whereas MBP is unfolded in aqueous solutions, insertion into reverse micelles generates a more folded structure, characterized by the presence of 20% alpha-helix. This conformation is unaffected by variations in the water content of the system (in the 2.0-22.4 w0 range). The reactivity of epsilon-amino groups of lysine residues with aqueous solutions of o-phthalaldehyde demonstrates that segments of the peptide chain are accessible to water. Similar results were obtained with the sequence involved in heme binding. In contrast, the sole tryptophan residue, Trp-117, is shielded from the aqueous solvent, as indicated by lack of reaction with N-bromosuccinimide. The invariance of the wavelength maximum emission in the fluorescence spectra as a function of w0 is consistent with this result.(ABSTRACT TRUNCATED AT 250 WORDS)     

A metal‐chelate affinity reverse micellar system for protein extraction

A new nonionic reverse micellar system is developed by blending two nonionic surfactants, Triton X‐45 and Span 80. At total surfactant concentrations lower than 60 mmol/L and molar fractions of Triton X‐45 less than 0.6, thermodynamically stable reverse micelles of water content (W₀) up to 30 are formed. Di(2‐ethylhexyl) phosphoric acid (HDEHP; 1–2 mmol/L) is introduced into the system for chelating transition metal ions that have binding affinity for histidine‐rich proteins. HDEHP exists in a dimeric form in organic solvents and a dimer associated with one transition metal ion, including copper, zinc, and nickel. The copper‐chelate reverse micelles (Cu‐RM) are characterized for their W₀, hydrodynamic radius (R_h), and aggregation number (N_ag). Similar with reverse micelles of bis‐2‐ethylhexyl sodium sulfosuccinate (AOT), R_h of the Cu‐RM is also linearly related to W₀. However, N_ag is determined to be 30–90 at W₀ of 5–30, only quarter to half of the AOT reverse micelles. Then, selective metal‐chelate extraction of histidine‐rich protein (myoglobin) by the Cu‐RM is successfully performed with pure and mixed protein systems (myoglobin and lysozyme). The solubilized protein can be recovered by stripping with imidazole or ethylinediaminetetraacetic acid (EDTA) solution. Because various transition metal ions can be chelated to the reverse micelles, it is convinced that the system would be useful for application in protein purification as well as simultaneous isolation and refolding of recombinant histidine‐tagged proteins expressed as inclusion bodies. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Deactivation and conformational changes of cutinase in reverse micelles

Deactivation data and fluorescence intensity changes were used to probe functional and structural stability of cutinase in reverse micelles. A fast deactivation of cutinase in anionic (AOT) reverse micelles occurs due to a reversible denaturation process. The deactivation and denaturation of cutinase is slower in small cationic (CTAB/1-hexanol) reverse micelles and does not occur when the size of the cationic reverse micellar water-pool is larger than cutinase. In both systems, activity loss and denaturation are coupled processes showing the same trend with time. Denaturation is probably caused by the interaction between the enzyme and the surfactant interface of the reversed micelle. When the size of the empty reversed micelle water-pool is smaller than cutinase (at W0 5, with W0 being the water:surfactant concentration ratio) a three-state model describes denaturation and deactivation with an intermediate conformational state existing on the path from native to denaturated cutinase. This intermediate was clearly detected by an increase in activity and shows only minor conformational changes relative to the native state. At W0 20, the size of the empty water-pool was larger than cutinase and the data was well described by a two-state model for both anionic and cationic reverse micelles. For AOT reverse micelles at W0 20, the intermediate state became a transient state and the deactivation and denaturation were described by a two-state model in which only native and denaturated cutinase were present. For CTAB/1-hexanol reverse micelles at W0 20, the native cutinase was in equilibrium with an intermediate state, which did not suffer denaturation. 1-Hexanol showed a stabilizing effect on cutinase in reverse micelles, contributing to the higher stabilities observed in the cationic CTAB/1-hexanol reverse micelles. Copyright 1998 John Wiley & Sons, Inc.     

Extraction of bovine serum albumin with reverse micelles from glucosylammonium and lactosylammonium surfactants

Reverse micelle extraction is still in the stage of laboratory. Major limitation associated with use of synthetic surfactants in reverse micelle extraction process is the unfolding or denaturation of proteins. Sugar surfactants are thought non-toxic and environmentally benign, and can exhibit interesting interfacial properties, but the application of sugar-based surfactants in protein extraction is still limited. In the present study, we extracted bovine serum albumin (BSA) by using reverse micelles from glucosylammonium (GA) and lactosylammonium (LA) surfactants (with dicarboxylate as counter ion). It was found that under optimum condition, (1) the maximum forward extraction efficiency was ca. 86% with GA, while only around 50% with LA, and (2) almost all BSA solubilized in reverse micelles prepared from GA could be recovered into aqueous phase, while the recovery of BSA from the reverse micelles of LA was lower. In addition, the optimum extraction parameters were closely related to surfactant structure. Therefore, the electrostatic interaction, H-bonding and sugar head size should be important for BSA transfer.     

Recovery of proteins and amino acids from reverse micelles by dehydration with molecular sieves

A new method is presented to precipitate proteins and amino acids from reverse micelles by dehydrating the micelles with molecular sieves. Nearly complete precipitation is demonstrated for alpha-chymotrypsin, cytochromec, and trytophan from 2-ethylhexyl sodium sulfosuccinate (AOT)/isooctane/water reverse micelle solutions. The products precipitate as a solid powder, which is relatively free of surfactant. The method does not require any manipulation of pH, ionic strength, temperature, pressure, or solvent composition, and is applicable over a broad range of these properties. This general approach is compared with other techniques. This general approach is compared with other techniques for the recovery of biomolecules from reverse micelles. (c) 1994 John Wiley & Sons, Inc.     

Ethylene glycol and the thermostability of trypsin in a reverse micelle system

The influence of ethylene glycol (EG) on the kinetics of hydrolysis of N-alpha-benzoyl-L-arginine ethyl ether catalyzed by trypsin encapsulated in sodium bis-(2-ethylhexyl)sulfosuccinate (AOT)-based reverse micelles was studied at different temperatures. Ethylene glycol was shown to shift the range of the trypsin activity in the reverse micelles towards higher temperatures. Infrared spectroscopy showed a stabilizing effect of EG on the secondary structure of the protein in the system of reverse micelles. Electron spin resonance spectroscopy showed that the solubilized protein affected the interactions of EG with the polar head groups of AOT and altered the rigidity of the micellar matrix. The results indicate that EG increases the thermostability of the solubilized enzyme in microemulsion media by two mechanisms.     

Bounded water kinetic model of β-galactosidase in reverse micelles

In the present investigation, -galactosidase was solubilized into Aerosol OT (AOT)/isooctane reverse micelles. Kinetic data for the hydrolysis of o-nitrophenyl--D-galactopyranoside (ONPG) at different pH values and molar ratios of water to AOT (W_o) were collected. It was observed that the usual kinetic model used for -galactosidase catalysis in aqueous systems failed to represent the experimental data. A bounded water model, however, showed a better correlation between enzymatic activity and W_o. In contrast to the aqueous system, controlling the water concentration in the reverse micelles allows the rate constants for the reaction between water molecules and glycosyl-enzyme complexes to be evaluated.     

Extraction of flexibly structured protein in AOT reverse micelles: the flexible structure of protein is the dominant factor for its incorporation into reverse micelles

The extraction of flexibly-structured protein in Aerosol-OT (AOT)/isooctane reverse micelles was investigated. A flexibly-structured lysozyme was prepared by reduction and carboxymethylation of the disulfide bonds in the lysozyme molecule. For a comparison, lysozymes whose surface hydrophobicity was modified by monoacylation of the amino groups were also used. The extraction rate of the flexibly-structured lysozyme into the micellar phase was greater than that of the native and monoacylated lysozymes, although the free energy change of the lysozyme prepared by breaking the disulfide bonds was smaller than that of the lysozymes whose surfaces were monoacylated. Viscosity measurement of the micellar organic phase containing the modified lysozymes indicated that extraction of the flexibly-structured lysozyme changed the micelle–micelle interaction, while measurement of the interfacial tension between the AOT/isooctane and protein aqueous systems showed the flexibly-structured lysozyme to be the most amphiphilic in character. These results indicated that the flexible structure of a protein was more dominant than its surface hydrophobicity for its incorporation into reverse micelles, and that it leads to greater micelle–micelle interaction.