Genetic map of Salmonella typhimurium, edition VIII.

We present edition VIII of the genetic map of Salmonella typhimurium LT2. We list a total of 1,159 genes, 1,080 of which have been located on the circular chromosome and 29 of which are on pSLT, the 90-kb plasmid usually found in LT2 lines. The remaining 50 genes are not yet mapped. The coordinate system used in this edition is neither minutes of transfer time in conjugation crosses nor units representing "phage lengths" of DNA of the transducing phage P22, as used in earlier editions, but centisomes and kilobases based on physical analysis of the lengths of DNA segments between genes. Some of these lengths have been determined by digestion of DNA by rare-cutting endonucleases and separation of fragments by pulsed-field gel electrophoresis. Other lengths have been determined by analysis of DNA sequences in GenBank. We have constructed StySeq1, which incorporates all Salmonella DNA sequence data known to us. StySeq1 comprises over 548 kb of nonredundant chromosomal genomic sequences, representing 11.4% of the chromosome, which is estimated to be just over 4,800 kb in length. Most of these sequences were assigned locations on the chromosome, in some cases by analogy with mapped Escherichia coli sequences.     

Sixty New STSs (Sequence-Tagged Sites) of Human Chromosome 21

From human chromosome 21-specific libraries, 22 SfiI linkingclones and 38 P1 clones were isolated and regionally mappedon the chromosome. The terminal sequences of these clones weredetermined and pairs of PCR primers were generated which couldspecifically amplify the sequenced regions. These sequence-taggedsites (STSs) should be useful for constructing a high resolutionmap of human chromosome 21.     

A new strategy useful for rapid identification of microsatellites from DNA libraries with large size inserts.

Microsatellites are new powerful polymorphic markers used for gene mapping. Their characterization requires that all the sequence surrounding the repeat be known in order to be able to design primers for PCR amplification. However, when using DNA libraries with large cloned inserts, this sequence characterization is not immediately practicable. In this paper, we describe a new strategy, based both on the use of a microsatellite specific probing and on the creation of nested deleted clones with the Exonuclease III, in order to position microsatellites in a range allowing direct sequencing. This method was applied to the screening of a mouse chromosome 19 DNA specific library. In this way, thirteen clones were identified by specific probing and seven were submitted to the nested deletion strategy. Five of them presented microsatellite sequences in specific deleted subclones which were selected and sequenced. Primers were designed for each of them and polymorphism between the genomes of several inbred strain of mouse have been determined. These microsatellites were mapped, three of them to chromosome 19 and two to chromosome 11.     

Characterization and linkage mapping of R-gene analogous DNA sequences in pea (Pisum sativum L.)

Pea (Pisum sativum L.) sequences that are analogous to the conserved nucleotide binding site (NBS) domain found in a number of plant disease resistance genes (R-genes) were cloned. Using redundant oligonucleotide primers and the polymerase chain reaction (PCR), we amplified nine pea sequences and characterised their sequences. The pea R-gene analog (RGA)- deduced amino acid sequences demonstrated significant sequence similarity with known R-gene sequences lodged in public databases. The genomic locations of eight of the pea RGAs were determined by linkage mapping. The eight RGAs identified ten loci that mapped to six linkage groups. In addition, the genomic organization of the RGAs was inferred. Both single-copy and multicopy sequence families were present among the RGAs, and the multicopy families occurred most often as tightly linked clusters of related sequences. Intraspecific copy number variability was observed in three of the RGA sequence families, suggesting that these sequence families are evolving rapidly. The genomic locations of the pea RGAs were compared with the locations of known pea R-genes and sym genes involved in the pea-rhizobia symbiosis. Two pea RGAs mapped in the genomic region containing a pea R-gene, Fw, and four pea RGAs mapped in regions of the genome containing sym genes. Received: 4 August 1999 / Accepted: 11 November 1999     

NBS-LRR resistance gene homologues in rice

Twenty three DNA fragments with a size of about 520 bp have been cloned from rice genome by PCR amplification using primers designed according to the conserved region of most plant resistance (R) genes which have Nucleotide Binding Site (NBS) and Leucine-Rich Repeat (LRR) domains. Homologous comparison showed that these fragments contained typical motifs of the NBS-LRR resistance gene class, kinase 1a, kinase 2a, kinase 3a and domain 2. Thus they were named R gene homologous sequences (RS). These RS were divided into 4 groups by clustering analysis and mapped onto chromosomes 1, 3, 4, 7, 8, 9, 10 and 11, respectively, by genetic mapping. Ten RS were located in the chromosomal intervals where known R genes had been mapped. Further RFLP analysis of an RS, RS13, near the bacterial blight resistance geneXa4 locus on chromosome 11 among near isogenic lines and pyramiding lines ofXa4 showed that RS13 was possibly amplified from the gene family ofXa4.     

A Physical Map of the X Chromosome of Drosophila Melanogaster: Cosmid Contigs and Sequence Tagged Sites

A physical map of the euchromatic X chromosome of Drosophila melanogaster has been constructed by assembling contiguous arrays of cosmids that were selected by screening a library with DNA isolated from microamplified chromosomal divisions. This map, consisting of 893 cosmids, covers ~64% of the euchromatic part of the chromosome. In addition, 568 sequence tagged sites (STS), in aggregate representing 120 kb of sequenced DNA, were derived from selected cosmids. Most of these STSs, spaced at an average distance of ~35 kb along the euchromatic region of the chromosome, represent DNA tags that can be used as entry points to the fruitfly genome. Furthermore, 42 genes have been placed on the physical map, either through the hybridization of specific probes to the cosmids or through the fact that they were represented among the STSs. These provide a link between the physical and the genetic maps of D. melanogaster. Nine novel genes have been tentatively identified in Drosophila on the basis of matches between STS sequences and sequences from other species.     

Polymorphisms revealed by PCR with single,short-sized,arbitrary primers are reliable markers for mouse and rat gene mapping

Ten single, arbitrarily designed oligodeoxynucleotide primers, with 50–70% (G+C) content, were used to amplify by polymerase chain reaction (PCR) sequences with DNA templates from several mouse species (Mus spretus, Mus musculus musculus, and Mus musculus domesticus), as well as DNA from the laboratory rat (Rattus norvegicus). Eight of these ten primers, used either individually or associated in pairs, generated a total of 13 polymorphic products which were used as genetic markers. All of these polymorphic sequences but one were mapped to a particular mouse chromosome, by use of DNA panels prepared either from interspecific backcross progeny of the type (C57BL/6 x Mus spretus)F₁ x C57BL/6 or DNA samples prepared from two sets of recombinant inbred (RI) strains (AKXL and BXD). Six rat-specific DNA segments were also assigned to a particular chromosome with DNA panels prepared from 18 rat/mouse somatic cell hybrids segregating rat chromosomes. From these experiments we conclude that, under precisely standardized PCR conditions, the DNA molecules amplified with these arbitrarily designed primers are useful and reliable markers for genetic mapping in both mouse and rat.     

Cloning of the Human Monocarboxylate Transporter MCT3 Gene: Localization to Chromosome 22q12.3–q13.2

Lactate transport across cell membranes is mediated by a family of proton-coupled monocarboxylate transporters (MCTs). The retinal pigment epithelium (RPE) expresses a unique member of this family, MCT3. A portion of the human MCT3 gene was cloned by polymerase chain reaction using primers designed from rat RPE MCT3 cDNA sequence. The human genomic sequence was used to design primers to clone human MCT3 cDNA and to identify a bacterial artificial chromosome clone containing the human MCT3 gene. The human MCT3 cDNA contained a 1512-nucleotide open reading frame with a deduced amino sequence 85% identical to rat MCT3. Comparison of the cDNA and genomic sequences revealed that the MCT3 gene was composed of five exons distributed over 5 kb of DNA. The exon–intron borders were conserved between the human and the chicken MCT3 genes. Using radiation hybrid mapping, the MCT3 gene was mapped to chromosome 22 between markers WI11639 and SGC30687. A search of chromosome 22 in the Sanger Centre database confirmed the location of the human MCT3 gene at 22q12.3–q13.2.     

Cloning of the human monocarboxylate transporter MCT3 gene: localization to chromosome 22q12.3-q13.2.

Lactate transport across cell membranes is mediated by a family of proton-coupled monocarboxylate transporters (MCTs). The retinal pigment epithelium (RPE) expresses a unique member of this family, MCT3. A portion of the human MCT3 gene was cloned by polymerase chain reaction using primers designed from rat RPE MCT3 cDNA sequence. The human genomic sequence was used to design primers to clone human MCT3 cDNA and to identify a bacterial artificial chromosome clone containing the human MCT3 gene. The human MCT3 cDNA contained a 1512-nucleotide open reading frame with a deduced amino sequence 85% identical to rat MCT3. Comparison of the cDNA and genomic sequences revealed that the MCT3 gene was composed of five exons distributed over 5 kb of DNA. The exon-intron borders were conserved between the human and the chicken MCT3 genes. Using radiation hybrid mapping, the MCT3 gene was mapped to chromosome 22 between markers WI11639 and SGC30687. A search of chromosome 22 in the Sanger Centre database confirmed the location of the human MCT3 gene at 22q12.3-q13.2.     

A procedure for mapping Arabidopsis mutations using co-dominant ecotype-specific PCR-based markers

A set of mapping markers have been designed for Arabidopsis thaliana that correspond to DNA fragments amplifed by the polymerase chain reaction (PCR). The ecotype of origin of these amplified fragments can be determined by cleavage with a restriction endo-nuclease. Specifically, 18 sets of PCR primers were synthesized, each of which amplifies a single mapped DNA sequence from the Columbia and Landsberg erecta ecotypes. Also identifed was at least one restriction endonuclease for each of these PCR products that generates ecotype-specific digestion patterns. Using these co-dominant cleaved amplified polymorphic sequences (CAPS), an Arabidopsis gene can be unambiguously mapped to one of the 10 Arabidopsis chromosome arms in a single cross using a limited number of F₂ progeny.     

Amplification of sequence tagged sites in five avian species using heterologous oligonucleotides

Short of a complete genomic DNA sequence, sequence tagged sites (STSs) have emerged as major genomic reagents for the genetic analysis of little-studied ecologically and agriculturally important organisms. Here, we report STS developed for the turkey (Meleagris gallopavo), guinea fowl (Numidea meleagris), Japanese quail (Coturnix coturnix) and pigeon using primers specific for reference DNA sequences of two chicken (Gallus gallus) genes, aggrecan (agc1) and type X collagen (col10). Additional STSs were also developed for turkey, quail and chicken using primers specific for the human apobec-1 gene. The total length of the STSs developed was 5990, 2522, 4127, 1539 and 6600 bp for the turkey, guinea fowl, Japanese quail, pigeon and chicken, respectively. Based on splice site consensus GT and AG sequences, four of the seven agc1-based chicken STS appear to contain introns. The human gene-based STSs showed no significant sequence identity with the reference GenBank sequences. Maximum likelihood, maximum parsimony and neighbour-joining analysis of an agc1-based STS that was common to all five species showed phylogenetic relationships consistent with those previously defined using mitochondria DNA sequences and nuclear gene restriction maps. Additionally, several putative single nucleotide polymorphisms (SNPs) were detected within the STSs, including eight in the turkey, two in the quail, and two in the chicken when multiple sequences were evaluated from each species. This report describes new STSs that are resources for genetic and physical mapping and genome analysis within and among avian species. These resources should further aid in our understanding of the biology of agriculturally important but little-studied guinea fowl and turkey. This revised version was published online in July 2006 with corrections to the Cover Date.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

A PCR product derived from female DNA with regional localization on the Y chromosome.

A 154-bp PCR product amplified from human female DNA mapped onto the Y chromosome under high-stringency in situ hybridization conditions. The female DNA sequence revealed an 89% homology with the HSDYZ1 sequence. When the same primers were used to amplify male DNA, a 154-bp DNA fragment was also obtained, showing a 98% homology with HSDYZ1. However, although the HSDYZ1 sequence is widely distributed along the long arm of the Y chromosome, both of these particular PCR products are di-regionally localized within this distal block of constitutive heterochromatin. In situ hybridization under lower stringency showed that these 154-bp sequences map both onto the autosomes and the Y chromosome. Overall, this paper shows (i) a new class of DNA sequences shared by the autosomes and the Y chromosome; and (ii) a substructured organization of some DNA repeats within the DYZ1 family that forms a large part of the constitutive heterochromatin of the Y chromosome.     

Genetic and physical mapping of telomeres and macrosatellites of rice

Telomeres and telomere-associated satellites of rice were genetically and physically analyzed by pulsed-field gel electrophoresis (PFGE) using Arabidopsis telomeric DNA and rice satellite sequences as probes. We demonstrate that Arabidopsis telomeric sequences hybridize to rice telomeres under the conditions of high stringency. Using the Arabidopsis probe, multiple, discrete telomeric fragments could be identified on pulsed-field gel blots of rice DNAs digested with rare-cutting restriction enzymes. Most of the telomeric bands larger than 300 kb are physically linked with satellite bands as revealed by PFGE. Some of the telomeric and satellite bands segregate in a Mendelian fashion and are highly reproducible. Three such telomeric bands have been mapped to the distal ends of RFLP linkage groups: Telsm-1 on chromosome 8, Telsa-1 on chromosome 9 and Telsm-3 on chromosome 11. One segregating satellite band was mapped to an internal region of chromosome 10. Telomeric fragments were shown not only to be genetically linked to but also physically linked (based on PFGE) to the terminal RFLP markers. The physical distance from telomeric sequences to a distal RFLP marker, r45s gene, on chromosome 9, is 200 kb while the distance from telomeric sequences to RG98, a terminal RFLP marker on chromosome 11, is 260 kb. Physical maps of the telomere regions of chromosome 9 and chromosome 11 are presented.     

Construction of an Integrated Physical and Gene Map of Human Chromosome 20p12 Providing Candidate Genes for Alagille Syndrome

Physical mapping and localization of eSTS markers were used to generate an integrated physical and gene map covering a ∼10-Mb region of human chromosome 20p12 containing the Alagille syndrome (AGS) locus. Seventy-four STSs, 28 of which were derived from cDNA sequences, mapped with an average resolution of 135 kb. The 28 eSTS markers define 20 genes. Six known genes, namely CHGB, BMP2, PLCB1, PLCB4, SNAP, and HJ1, were precisely mapped. Among the genes identified, one maps in the smallest region of overlap of the deletions associated with AGS and could therefore be regarded as a candidate gene for Alagille syndrome.     

Construction of a bacterial artificial chromosome (BAC) library of Lycopersicon esculentum cv. Stevens and its application to physically map the Sw-5 locus

The Sw-5 gene is a dominantly inherited resistance gene in tomato and functional against a number of tospovirus species. The gene has been mapped on chromosome 9, tightly linked to RFLP markers CT220 and SCAR421. To analyse the Sw-5 locus, a BAC genomic library was constructed of tomato cv. Stevens, homozygous for the Sw-5 gene. The library comprised 18 816 clones with an average insert size of 100 kb, corresponding to two genome equivalents. The library was screened by PCR using primers designed for the CT220 and SCAR421 sequences, resulting in a 250 kb contig of known orientation on the long arm of chromosome 9. Using degenerate primers based on homologous sequences in the nucleotide binding site of resistance gene sequences, three discrete PCR fragments obtained from this contig were cloned and sequenced. Analysis of these fragments revealed a high similarity with numerous resistance genes or resistance gene like sequences. The present data indicate that at least three different resistance gene candidate (RGC) sequences are present in the vicinity of marker CT220, supporting the view that a resistance gene family may be responsible for the unusually broad resistance to tospoviruses conferred by the Sw-5 locus. This revised version was published online in June 2006 with corrections to the Cover Date.     

Cloning and in silico Mapping of Resistance Gene Analogues Isolated from Rice Lines Containing Known Genes for Blast Resistance

We amplified resistance gene analogues (RGAs) from the genomic DNA of 10 rice lines having varying degree of resistance to Magnaporthe grisea by using degenerate primers and various RGAs were mapped in silico on different rice chromosomes. The amplified products were grouped into 3–8 restriction fragment length polymorphic classes by using Mbo1 and Alu1 restriction enzymes. Of 98 RGAs obtained in this study, 65 RGA clones showed more than 95% homology with various RGAs sequences present in the GenBank. Phylogenetic analysis of these RGAs formed 11 groups. Using sequence homology approach, RGAs isolated in this study were physically mapped on 23 loci on chromosomes 1, 2, 3, 4, 5, 6, 7, 8, 10, 11 and 12. Twenty RGAs were mapped near to the chromosomal regions containing known genes/QTLs for rice blast, bacterial leaf blight and sheath blight resistance. Thirty‐nine RGA sequences also contained open reading frame representing signature of potential disease resistance genes.     

EasyExonPrimer

EasyExonPrimer is a web-based software that automates the design of PCR primers to amplify exon sequences from genomic DNA. EasyExonPrimer is written in Perl and uses Primer3 to design PCR primers based on the genome builds and annotation databases available at the University of California, Santa Cruz (UCSC) Genome Browser database (http://genome.ucsc.edu/). It masks repeats and known single nucleotide polymorphism (SNP) sites in the genome and designs standardised primers using optimised conditions. Users can input genes by RefSeq mRNA ID, gene name or keyword. The primer design is optimised for large-scale resequencing of exons. For exons larger than 1 kb, the user has the option of breaking the exon sequence down into overlapping smaller fragments. All primer pairs are then verified using the In-Silico PCR software to test for uniqueness in the genome. We have designed >1000 pairs of primers for 90 genes; 95% of the primer pairs successfully amplified exon sequences under standard PCR conditions without requiring further optimisation. AVAILABILITY: EasyExonPrimer is available from http://129.43.22.27/~primer/. The source code is also available upon request. CONTACT: Xiaolin Wu (forestwu@mail.nih.gov).