Small-angle X-ray scattering study of the interaction of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers with lipid bilayers

The relationship between molecular architecture and the nature of interactions with lipid bilayers has been studied for a series of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers using small-angle X-ray scattering (SAXS) and thermal analysis (differential scanning calorimetry, DSC). The number of molecular repeat units in the hydrophobic poly(propylene oxide), PPO, block has been found to be a critical determinant of the nature of triblock copolymer-lipid bilayer association. For dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-based biomembrane structures, polymers possessing a PPO chain length commensurate with the acyl chain dimensions of the lipid bilayer yield highly ordered, swollen lamellar structures consistent with well-integrated (into the lipid bilayer) PPO blocks. Triblock copolymers of lesser PPO chain length yield materials with structural characteristics similar to a simple dispersion of DMPC in water. Increasing the concentration (from 4 to 12 mol %) of well-integrated triblock copolymers enhances the structural ordering of the lamellar phase, while concentrations exceeding 16 mol % result in the formation of a hexagonal phase. Examination of temperature-induced changes in the structure of these mesophases (complex fluids) reveals that if the temperature is reduced sufficiently, all compositions exclude polymer and thus exhibit the characteristic SAXS pattern for hydrated DMPC bilayers. Increasing the temperature promotes better insertion of the polymers possessing PPO chain lengths sufficient for membrane insertion. No temperature-induced structural changes are observed in compositions prepared with PEO-PPO-PEO polymers that feature PPO length insufficient to permit full incorporation into the lipid bilayer.     

Electron density mapping of triblock copolymers associated with model biomembranes: insights into conformational states and effect on bilayer structure

One-dimensional electron-density profiles derived from synchrotron small-angle X-ray scattering (SAXS) have been constructed and used to determine the conformational state of selected poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers and the region of their association with a lipid bilayer. The number of molecular repeat units in the hydrophobic PPO block has been found to determine both the nature of triblock polymer-membrane association and the conformational state of the symmetric, flanking hydrophilic PEO units. For DMPC-based biomembranes, polymers whose PPO chain length is less than that of the bilayer thickness insert weakly into the membrane with the PEO blocks on the same side of the bilayer, leading to delocalization of the PEO at the membrane-water interface. This polymer architecture has been found not to alter the membrane fluidity and roughness. Conversely, polymers whose chain length is sufficient to span the lipid bilayer are tightly integrated, projecting their PEO chains into the water channels on opposing sides of the bilayer. The coiled conformational state of the PEO chains produces steric pressure on the bilayer, causing a thinning of the membrane and leading to a rigid, less-mobile bilayer than systems where the polymer is introduced as the lipid conjugate.     

Studies of the thermotropic phase behavior of phosphatidylcholines containing 2-alkyl substituted fatty acyl chains: a new class of phosphatidylcholines forming inverted nonlamellar phases.

We have synthesized a number of 1,2-diacyl phosphatidylcholines with hydrophobic substituents adjacent to the carbonyl group of the fatty acyl chain and studied their thermotropic phase behavior by differential scanning calorimetry, 31P-nuclear magnetic resonance spectroscopy, and x-ray diffraction. Our results indicate that the hydrocarbon chain-melting phase transition temperatures of these lipids are lower than those of the n-saturated diacylphosphatidylcholines of similar chain length. In the gel phase, the 2-alkyl substituents on the fatty acyl chains seem to inhibit the formation of tightly packed, partially dehydrated, quasi-crystalline bilayers (Lc phases), although possibly promoting the formation of chain-interdigitated bilayers. In the liquid-crystalline state, however, these 2-alkyl substituents destabilize the lamellar phase with respect to one or more inverted nonlamellar structures. In general, increases in the length, bulk, or rigidity of the alkyl substituent result in an increased destabilization of the lamellar gel and liquid-crystalline phases and a greater tendency to form inverted nonlamellar phases, the nature of which depends upon the size of the 2-alkyl substituent. Unlike normal non-lamella-forming lipids such as the phosphatidylethanolamines, increases in the length of the main acyl chain stabilize the lamellar phases and reduce the tendency to form nonlamellar structures. Our results establish that with a judicious choice of a 2-alkyl substituent and hydrocarbon chain length, phosphatidylcholines (and probably most other so-called "bilayer-preferring" lipids) can be induced to form a range of inverted nonlamellar structures at relatively low temperatures. The ability to vary the lamellar/nonlamellar phase preference of such lipids should be useful in studies of bilayer/nonbilayer phase transitions and of the molecular organization of various nonlamellar phases. Moreover, because the nonlamellar phases can easily be induced at physiologically relevant temperatures and hydration levels while avoiding changes in polar headgroup composition, this new class of 2-alkyl-substituted phosphatidylcholines should prove valuable in studies of the physiological role of non-lamella-forming lipids in reconstituted lipid-protein model membranes.     

The structure and thermotropic phase behaviour of dipalmitoylphosphatidylcholine codispersed with a branched-chain phosphatidylcholine

The structure and thermotropic phase behaviour of a fully hydrated binary mixture of dipalmitoylphosphatidylcholine and a branched-chain phosphatidylcholine, 1, 2-di(4-dodecyl-palmitoyl)-sn-glycero-3-phosphocholine, were examined using differential scanning calorimetry, synchrotron X-ray diffraction and freeze-fracture electron microscopy. The branched-chain lipid forms a nonlamellar phase when dispersed alone in aqueous medium. Mixed aqueous dispersions of the two phospholipids containing less than 33 mol% of the branched-chain lipid form lamellar phases over the whole temperature range were studied (4 degrees C to 60 degrees C). When present in proportions greater than 33 mol% it induces a hexagonal phase in mixed aqueous dispersions with dipalmitoylphosphatidylcholine at temperatures above the fluid phase transition. At temperatures below 35 degrees C a hexagonal phase coexists with a gel bilayer phase. The lamellar<-->nonlamellar transition can be explained satisfactorily on the basis of the shape of the molecule expressed in terms of headgroup and chain cross-sectional areas. At temperatures below 35 degrees C macroscopic phase separation of two gel phases takes place. Freeze-fracture electron microscopy revealed that one gel phase consists of bilayers with a highly regular, periodic superstructure (macro-ripples) whereas the other phase forms flat, planar bilayers. The macro-ripple phase appears to represent a relaxation structure required to adapt to the packing constraints imposed by the incorporation of the branched-chain lipid into the dipalmitoylphosphatidylcholine host bilayer. The data suggest that structural changes that take place on cooling the mixed dispersion below the lamellar<-->nonlamellar phase transition temperature cannot be adequately described using the molecular form concept. Instead it is necessary to take into account the detailed molecular form of the guest lipid as well as its physical properties.     

Addition of Block Copolymers to Liposomes Prepared Using Soybean Lecithin. Effects on Formation,Stability and the Specific Localization of the Incorporated Surfactants Investigated

Abstract

Soybean lecithin disperses into water forming multilamellar liposomes, which on sonication produce vesicles of the order of 40–50nm (diameter), as determined by Photon Correlation Spectroscopy (PCS). The effect of concentration of lecithin and sonication time was systematically investigated. Vesicles were then prepared by incorporation of A – B – A block copolymers of polyethylene oxide (PEO) and polypropylene oxide(PPO), i.e.(PEO-PPO-PEO), in order to construct systems of increased steric stability. The effect of the molecular weight of the PEO and PPO chains on the vesicle size was systematically studied by using various molecules to prepare the vesicles. Initial addition of these (tri-)block copolymers causes an increase in the size of the vesicles. This increase continues until a certain concentration of block copolymer is reached, after which a decrease in size is observed. The initial increase was thought to be due to the incorporation of the block copolymer onto the vesicle bilayer. The reduction at high surfactant concentration is thought to be due to solubilization of the bilayer and the ultimate breakdown of the vesicles. Electrophoresis experiments showed a reduction in the ξ-potential of the vesicles on incorporation of the block copolymer which can be attributed to the shift of the shear plane. Various models are presented to describe this incorporation. The vesicles prepared using the block copolymers are believed to enhance the steric effects and so lead to more stable and pharmaceutically optimum systems.     

Homogeneous hybrid droplet interface bilayers assembled from binary mixtures of DPhPC phospholipids and PB-b-PEO diblock copolymers

Hybrid membranes built from phospholipids and amphiphilic block copolymers seek to capitalize on the benefits of both constituents for constructing biomimetic interfaces with improved performance. However, hybrid membranes have not been formed or studied using the droplet interface bilayer (DIB) method, an approach that offers advantages for revealing nanoscale changes in membrane structure and mechanics and offers a path toward assembling higher-order tissues. We report on hybrid droplet interface bilayers (hDIBs) formed in hexadecane from binary mixtures of synthetic diphytanoyl phosphatidylcholine (DPhPC) lipids and low molecular weight 1,2 polybutadiene-b-polyethylene oxide (PBPEO) amphiphilic block copolymers and use electrophysiology measurements and imaging to assess the effects of PBPEO in the membrane. This work reveals that hDIBs containing up to 15 mol% PBPEO plus DPhPC are homogeneously mixtures of lipids and polymers, remain highly resistive to ion transport, and are stable—including under applied voltage. Moreover, they exhibit hydrophobic thicknesses similar to DPhPC-only bilayers, but also have significantly lower values of membrane tension. These characteristics coincide with reduced energy of adhesion between droplets and the formation of alamethicin ion channels at significantly lower threshold voltages, demonstrating that even moderate amounts of amphiphilic block copolymers in a lipid bilayer provide a route for tuning the physical properties of a biomimetic membrane.     

Surface charge markedly attenuates the nonlamellar phase-forming propensities of lipid bilayer membranes: calorimetric and (31)P-nuclear magnetic resonance studies of mixtures of cationic, anionic, and zwitterionic lipids

The lamellar/nonlamellar phase preferences of lipid model membranes composed of mixtures of several cationic lipids with various zwitterionic and anionic phospholipids were examined by a combination of differential scanning calorimetry and (31)P NMR spectroscopy. All of the cationic lipids utilized in this study form only lamellar phases in isolation. Mixtures of these cationic lipids with zwitterionic strongly lamellar phase-preferring lipids such as phosphatidylcholine form only the lamellar liquid-crystalline phase even at high temperatures, as expected. Moreover, mixtures of these cationic lipids with strongly nonlamellar phase-preferring zwitterionic lipids such as phosphatidylethanolamine exhibit a markedly reduced propensity to form inverted nonlamellar phases, again as expected. However, when mixed with anionic lipids such as phosphatidylserine, phosphatidylglycerol, cardiolipin, or phosphatidic acid, a marked enhancement of nonlamellar phase-forming propensity occurs, despite the fact both components of the mixture are nominally lamellar phase-preferring. An examination of the lamellar/nonlamellar phase transition temperatures and the nature of the nonlamellar phases formed, as a function of temperature and of the composition of the mixture, indicates that the propensity to form inverted nonlamellar phases is maximal in mixtures where the mean surface charge of the membrane surface approaches neutrality and decreases markedly with increases in the density of positive or negative charge at the membrane surface. Moreover, the onset temperatures of the reversed hexagonal phase rise more steeply than do those of the inverted cubic phase as the ratio of cationic and anionic lipids is varied, suggesting that the formation of inverted hexagonal phases is more sensitive to this surface charge effect. These results indicate that surface charge per se is a significant and effective modulator of the lamellar/nonlamellar phase preferences of membrane lipids and that charged group interactions at membrane surfaces may have a major role in regulating this particular membrane property.     

MSI-78, an analogue of the magainin antimicrobial peptides,disrupts lipid bilayer structure via positive curvature strain

In this work, we present the first characterization of the cell lysing mechanism of MSI-78, an antimicrobial peptide. MSI-78 is an amphipathic alpha-helical peptide designed by Genaera Corporation as a synthetic analog to peptides from the magainin family. (31)P-NMR of mechanically aligned samples and differential scanning calorimetry (DSC) were used to study peptide-containing lipid bilayers. DSC showed that MSI-78 increased the fluid lamellar to inverted hexagonal phase transition temperature of 1,2-dipalmitoleoyl-phosphatidylethanolamine indicating the peptide induces positive curvature strain in lipid bilayers. (31)P-NMR of lipid bilayers composed of MSI-78 and 1-palmitoyl-2-oleoyl-phosphatidylethanolamine demonstrated that the peptide inhibited the fluid lamellar to inverted hexagonal phase transition of 1-palmitoyl-2-oleoyl-phosphatidylethanolamine, supporting the DSC results, and the peptide did not induce the formation of nonlamellar phases, even at very high peptide concentrations (15 mol %). (31)P-NMR of samples containing 1-palmitoyl-2-oleoyl-phosphatidylcholine and MSI-78 revealed that MSI-78 induces significant changes in the bilayer structure, particularly at high peptide concentrations. At lower concentrations (1-5%), the peptide altered the morphology of the bilayer in a way consistent with the formation of a toroidal pore. Higher concentrations of peptide (10-15%) led to the formation of a mixture of normal hexagonal phase and lamellar phase lipids. This work shows that MSI-78 induces significant changes in lipid bilayers via positive curvature strain and presents a model consistent with both the observed spectral changes and previously published work.     

Membrane restructuring by Bordetella pertussis adenylate cyclase toxin, a member of the RTX toxin family

Adenylate cyclase toxin (ACT) is secreted by Bordetella pertussis, the bacterium causing whooping cough. ACT is a member of the RTX (repeats in toxin) family of toxins, and like other members in the family, it may bind cell membranes and cause disruption of the permeability barrier, leading to efflux of cell contents. The present paper summarizes studies performed on cell and model membranes with the aim of understanding the mechanism of toxin insertion and membrane restructuring leading to release of contents. ACT does not necessarily require a protein receptor to bind the membrane bilayer, and this may explain its broad range of host cell types. In fact, red blood cells and liposomes (large unilamellar vesicles) display similar sensitivities to ACT. A varying liposomal bilayer composition leads to significant changes in ACT-induced membrane lysis, measured as efflux of fluorescent vesicle contents. Phosphatidylethanolamine (PE), a lipid that favors formation of nonlamellar (inverted hexagonal) phases, stimulated ACT-promoted efflux. Conversely, lysophosphatidylcholine, a micelle-forming lipid that opposes the formation of inverted nonlamellar phases, inhibited ACT-induced efflux in a dose-dependent manner and neutralized the stimulatory effect of PE. These results strongly suggest that ACT-induced efflux is mediated by transient inverted nonlamellar lipid structures. Cholesterol, a lipid that favors inverted nonlamellar phase formation and also increases the static order of phospholipid hydrocarbon chains, among other effects, also enhanced ACT-induced liposomal efflux. Moreover, the use of a recently developed fluorescence assay technique allowed the detection of trans-bilayer (flip-flop) lipid motion simultaneous with efflux. Lipid flip-flop further confirms the formation of transient nonlamellar lipid structures as a result of ACT insertion in bilayers.     

Preparation of micelle-forming polymer-drug conjugates.

Adriamycin, a hydrophobic anticancer drug, was conjugated with poly(ethylene oxide)-poly(aspartic acid) block copolymers composed of various lengths of each block copolymer segment ranging from 1000 to 12,000 in molecular weight and from 10 to 80 units, respectively. Conjugation was achieved without precipitation by adjusting the ratio of adriamycin to aspartic acid residues of the block copolymer and the quantity of DMF used for the reaction. Thus obtained conjugates showed high water solubility irrespective of a large amount of the conjugated adriamycin. Furthermore, these conjugates were found to form micellar structures with a hydrophobic inner core and a hydrophilic outer shell. This micellar architecture may be utilized for effective drug targeting.     

Effect of lipid peroxidation on molecular arrangement of phospholipids in liposomes prepared from egg yolk phosphatidylcholine or total rat brain lipids. A 31P NMR study.

Changes in molecular arrangement of membrane phospholipids in the course of lipid autoxidation were studied by means of broad-band 31-P NMR spectroscopy. Multilamellar liposomes prepared from egg yolk phosphatidylcholine (PC) or total lipid extracts from rat brains (TL) were used as models. The initial lamellar arrangement of phospholipids of both types changed as lipid peroxidation proceeded and a narrow isotropic signal appeared in the spectra at 0 ppm, this phenomenon being more prominent for TL than for PC. Probably the isotropic signal represents some nonlamellar structures within the membranes of peroxidized lipids.     

NMR study of the preferred membrane orientation of polyisoprenols (dolichol) and the impact of their complex with polyisoprenyl recognition sequence peptides on membrane structure

Earlier NMR studies showed that the polyisoprenols (PIs) dolichol (C95), dolichylphosphate (C95-P) and undecaprenylphosphate (C55-P) could alter membrane structure by inducing in the lamellar phospholipid (PL) bilayer a nonlamellar or hexagonal (Hex II) structure. The destabilizing effect of C95 and C95-P on host fatty acyl chains was supported by small angle X-ray diffraction and freeze-fracture electron microscopy. Our present 1H- and 31P-NMR studies show that the addition of a polyisoprenol recognition sequence (PIRS) peptide to nonlamellar membranes induced by the PIs can reverse the hexagonal structure phase back to a lamellar structure. This finding shows that the PI:PIRS docking complex can modulate the polymorphic phase transitions in PL membranes, a finding that may help us better understand how glycosyl carrier-linked sugar chains may traverse membranes. Using an energy-minimized molecular modeling approach, we also determined that the long axis of C95 in phosphatidylcholine (PC) membranes is oriented approximately parallel to the interface of the lipid bilayer, and that the head and tail groups are positioned near the bilayer interior. In contrast, the phosphate head group of C95-P is anchored at the PC bilayer, and the angle between the long axis of C95-P and the bilayer interface is about 758, giving rise to a preferred conformation more perpendicular to the plane of the bilayer. Molecular modeling calculations further revealed that up to five PIRS peptides can bind cooperatively to a single PI molecule, and this tethered structure has the potential to form a membrane channel. If such a channel were to exist in biological membranes, it could be of functional importance in glycoconjugate translocation, a finding that has not been previously reported.     

The biosynthetic incorporation of short-chain linear saturated fatty acids by Acholeplasma laidlawii B may suppress cell growth by perturbing membrane lipid polar headgroup distribution

Acholeplasma laidlawii B cells made fatty acid auxotrophic by growth in the presence of the biotin-binding agent avidin grow increasingly poorly at 37 degrees C when supplemented with single exogenous linear saturated fatty acids of decreasing hydrocarbon chain length. Interestingly, this progressive decrease in growth yields with decreasing hydrocarbon chain length is not observed when cells are cultured in the presence of other classes of exogenous fatty acids. Moreover, normal growth is observed is other types of fatty acids with equivalent or shorter hydrocarbon chain lengths, indicating that poor growth in the presence of short-chain linear saturated fatty acids cannot be due to a decrease in membrane lipid bilayer thickness per se. To understand the molecular basis of such growth inhibition, we determined the growth yields, membrane lipid fatty acid and polar headgroups compositions, and phase state and fluidity of the membrane lipids in cells progressively biosynthetically enriched in tridecanoic acid (13:0) or dodecanoic acid (12:0). The growth of fatty acid auxotrophic A. laidlawii B cells grown in the presence of binary combinations of an exogenous fatty acid which supports normal growth on its own and 13:0 or 12:0 revealed that growth inhibition is not observed until 13:0 and 12:0 biosynthetic incorporation levels reach about 90 and 60 mol %, respectively, after which growth is markedly inhibited. Differential scanning calorimetric analyses of membranes from cells maximally enriched in 13:0 indicate that the lipid gel/liquid-crystalline phase transition temperature is unexpectedly high but that at the growth temperature of 37 degrees C, the membrane lipid bilayer is almost exclusively in the liquid-crystalline state but is certainly not excessively fluid. However, high levels of 13:0 incorporation produce a greatly elevated level of the high melting, reversed nonlamellar phase-preferring lipid component monoglucosyl diacylglycerol, and greatly reduced levels of all other membrane lipid components. This marked elevation of monoglucosyl diacylglycerol levels can be rationalized as a regulatory response which maintains the lamellar/nonlamellar phase-forming propensity of the total membrane lipid mixture relatively constant in the face of the biosynthetic incorporation of increasing quantities of short-chain saturated fatty acids, which favor the lamellar phase. However, this lipid biosynthetic response produces a marked decline in the levels of anionic phospholipid and phosphoglycolipid which are probably required to maintain the minimal negative surface charge density of the lipid bilayer, which we suggest is responsible for the observed growth inhibition. This work shows that the lipid biosynthetic regulatory mechanisms present in this organism may sometimes operate at cross purposes such that it is not possible to simultaneously optimize all of the biologically relevant physical properties of the membrane lipid bilayer.     

Structural Polymorphisms of Rough Mutant Lipopolysaccharides Rd to Ra from Salmonella minnesota

The structural polymorphisms of rough mutant lipopolysaccharides (LPS) Rd, Rc, Rb, and Ra from Salmonella minnesota (strains R4, R7, Rz, R5, R345, and R60, respectively) were investigated as a function of temperature, water content, and Mg²⁺ concentration. The gel to liquid crystalline (B↔α) phase transition temperature (T_c) and the state of order within each phase were measured by Fourier transform infrared spectroscopy. The amount of bound water was determined by differential scanning calorimetry and the three-dimensional structures in each phase state were characterized by synchrotron radiation X-ray diffraction. The results indicate an extremely complex dependence of the structural behavior of LPS on ambient conditions. The B↔α acyl chain melting temperatures at high water contents (95-97%), T_c = 31 to 32°C for LPS Rd, 33 to 35°C for LPS Rc to Rb, and 36°C for LPS Ra, increase with decreasing water content and in the presence of Mg²⁺ cations with a concomitant broadening of the transition range. Below 30 to 50% water content, no distinct phase transitions can be observed. These effects are most pronounced for LPS with the shortest sugar chains. Below 50% water content, only lamellur structures can be observed in the temperature range 5 to 80°C, independent of the Mg²⁺ concentration. Above 50% water concentration, for large [LPS]:[Mg²⁺] molar ratios the predominant structure above T_c is nonlamellar; for smaller [LPS]:[Mg²⁺] molar ratios a superposition of lamellar and nonlamellar structures is found. For all LPS Rd to Rb at low Mg²⁺ concentrations, the phase transition is connected with a change in the three-dimensional structure from lamellar or mixed lamellar/nonlamellar to a pure nonlamellar, probably cubic structure. The tendency to form nonlamellar structures decreases with the length of the core oligosaccharide. At an equimolar ratio of [LPS] and [Mg²⁺] a multibilayered organization is observed. Some of the nonlamellar structures are cubic phases with periodicities between 12 and 16 nm. The molecular dimensions of the single endotoxin molecules in the absence and the presence of external water are estimated from the different lamellar periodicities, including those of free lipid A and deep rough mutant LPS Re. These observations are discussed with respect to the biological importance of LPS as a potent inducer of biological effects in mammals.     

Phase behavior and structure of aqueous dispersions of sphingomyelin

The phase behavior of bovine brain sphingomyelin in water has been determined by polarizing light microscopy, differential scanning calorimetry, and X-ray diffraction. Lamellar phases, in which water is intercalated between sheets of lipid molecules arranged in the classical bilayer fashion, are present over much of the phase diagram. An order-disorder transition separates the high temperature, liquid crystalline, lamellar phase from a more ordered lamellar phase at low temperatures. The hydration characteristics of sphingomyelin are similar to the structurally related lecithin in that only limited amounts of water are incorporated above and below the transition. Above the transition at 47 degrees C, a maximum of 35% by weight of water can be incorporated between the lipid bilayers, the total thickness at maximum hydration being 60.2 A, the lipid thickness 38 A, and the surface area per lipid molecule at the interface 60 A(2). Water in excess of 35% by weight is present as a separate phase. Below the phase transition, at 25 degrees C a maximum of 42% by weight of water may be incorporated between the lipid bilayers. On increasing the hydration, the lamellar repeat distance increases from 63.5 A to a limiting value of 76 A. Within this hydration range the calculated lipid thickness decreases from 63.5 to 42.5 A, and the surface area per lipid molecule increases from 36.1 to 53.6 A(2). Although these changes may be accounted for by a structure in which the hexagonally packed ordered hydrocarbon chains tilt progressively with respect to the normal to the bilayer plane on increasing hydration, it is possible that changes in other more complex lamellar structures may be responsible for these variations in lipid thickness and surface area.     

Synthesis and aqueous solution properties of novel sugar methacrylate-based homopolymers and block copolymers

We report the facile preparation of a range of novel, well-defined cyclic sugar methacrylate-based polymers without recourse to protecting group chemistry. 2-Gluconamidoethyl methacrylate (GAMA) and 2-lactobionamidoethyl methacrylate (LAMA) were prepared directly by reacting 2-aminoethyl methacrylate with D-gluconolactone and lactobionolactone, respectively. Homopolymerization of GAMA and LAMA by atom transfer radical polymerization (ATRP) gave reasonably low polydispersities as judged by aqueous gel permeation chromatography. A wide range of sugar-based block copolymers were prepared using near-monodisperse macroinitiators based on poly(ethylene oxide) [PEO], poly(propylene oxide) [PPO], or poly(e-caprolactone) [PCL] and/or by sequential monomer addition of other methacrylic monomers such as 2-(diethylamino)ethyl methacrylate [DEA], 2-(diisopropylaminoethyl methacrylate [DPA], or glycerol monomethacrylate [GMA]. The reversible micellar self-assembly of selected sugar-based block copolymers [PEO23-GAMA50-DEA100, PEO23-LAMA30-DEA50, PPO33-GAMA50, and PPO33-LAMA50] was studied in aqueous solution as a function of pH and temperature using dynamic light scattering, transmission electron microscopy, surface tensiometry, and 1H NMR spectroscopy.     

Synthesis and ordered structure of amphipatic block copolymers with a saccharide and a peptide block

Amphipatic block copolymers (OβEb) with a hydrophilic saccharide block and a hydrophobic polypeptide block were synthesized. In these copolymers the saccharide block is the glyco-amino acid Oβ from ovomucoid and the peptide block (Eb) is a poly(γ-benzyl-L -glutamate) block. Copolymers OβEb exhibit, in the solid state and in Me₂SO concentrated solutions, mesomorphic lamellar structures where the polypeptide chains are in an α-helical conformation. Depending on the molecular weight of the polypeptide block, three types of lamellar structures are obtained, and they differ by the mode of organization of the polypeptide chains in their lamellae and by the T or Y conformation of the saccharide block.     

Aggregatibacter actinomycetemcomitans leukotoxin cytotoxicity occurs through bilayer destabilization

The Gram-negative bacterium, Aggregatibacter actinomycetemcomitans, is a common inhabitant of the human upper aerodigestive tract. The organism produces an RTX (Repeats in ToXin) toxin (LtxA) that kills human white blood cells. LtxA is believed to be a membrane-damaging toxin, but details of the cell surface interaction for this and several other RTX toxins have yet to be elucidated. Initial morphological studies suggested that LtxA was bending the target cell membrane. Because the ability of a membrane to bend is a function of its lipid composition, we assessed the proficiency of LtxA to release of a fluorescent dye from a panel of liposomes composed of various lipids. Liposomes composed of lipids that form nonlamellar phases were susceptible to LtxA-induced damage while liposomes composed of lipids that do not form non-bilayer structures were not. Differential scanning calorimetry demonstrated that the toxin decreased the temperature at which the lipid transitions from a bilayer to a nonlamellar phase, while (31) P nuclear magnetic resonance studies showed that the LtxA-induced transition from a bilayer to an inverted hexagonal phase occurs through the formation of an isotropic intermediate phase. These results indicate that LtxA cytotoxicity occurs through a process of membrane destabilization.     

Synthesis and in vitro evaluation of novel star-shaped block copolymers (blocked star vectors) for efficient gene delivery

Novel 4-branched diblock copolymers consisting of cationic chains as an inner domain and nonionic chains as an outer domain were prepared by iniferter-based living radial polymerization and evaluated as a polymeric transfectant. The cationic polymerization of 3-(N,N-dimethylamino)propyl acrylamide (DMAPAAm) using 1,2,4,5-tetrakis( N,N-diethyldithiocarbamylmethyl)benzene as a 4-functional iniferter followed by the nonionic block polymerization of N,N-dimethylacrylamide (DMAAm) afforded 4-branched diblock copolymers with controlled compositions. By changing the solution or irradiation conditions, 4-branched PDMAPAAms with molecular weights of 10,000, 20,000, and 50,000 were synthesized. In addition, by graft polymerization, PDMAPAAm-PDMAAm blocked copolymers with copolymer composition (unit ratio of DMAAm/DMAPAAm) ranging from 0.18 to 1.0 for each cationic polymer were synthesized. All polymers were shown to interact with and condense plasmid DNA to yield polymer/DNA complexes (polyplexes). A transfection study on COS-1 cells showed that the polyplexes from block copolymers with cationic chain length of approximately 50,000 and a nonionic chain length of 30,000, which were approximately 200 nm in diameter and very stable in aqueous media, had the most efficient luciferase activity with minimal cellular cytotoxicity under a charge ratio of 20 (vector/pDNA). The PDMAPAAm-PDMAAm-blocked, star-shaped polymers are an attractive novel class of nonviral gene delivery systems.     

Effect of ethylene oxide and propylene oxide block copolymers on the permeability of bilayer lipid membranes to small solutes including doxorubicin

The effects of ethylene oxide and propylene oxide block copolymers (pluronics) on the permeability of several weak acids and bases through bilayer lipid membranes have been studied by the methods of monitoring (1) pH shifts near planar bilayers, (2) doxorubicin fluorescence quenching inside liposomes, and (3) current transients in the presence of hydrophobic anions. It has been shown that pluronics facilitate the permeation of comparatively large molecules (such as 2-n-undecylmalonic acid and doxorubicin) across lipid bilayers, while the permeation of small solutes (such as ammonium and acetic acid) remains unaffected. Pluronics also accelerate the translocation of large hydrophobic anions (tetraphenylborate). The effect of pluronics correlates with the content of propylene oxide units: it is enhanced when the portion of polypropylene oxide block in the copolymer is increased. The action of the pluronic on lipid membrane permeability differs from the effect of the conventional detergent Triton X-100, which does not affect doxorubicin transport if added at concentrations similar to those used for pluronics. It has been proposed that pluronics accelerate the processes of solute diffusion within lipid bilayers (in a structure-dependent manner) rather than influencing the rate of solute adsorption/desorption on the membrane surface. We suppose that the effect of pluronics on doxorubicin permeation across lipid bilayers along with the known effect on the multidrug resistance protein determines its influence on the therapeutic activity of anthracycline drugs.