Bioethanol and biodiesel: Alternative liquid fuels for future generations

The global population is expected to increase by approximately 3 billion people by 2050. With this increase in population, industry, transportation the cost of fossil fuels will grow dramatically. New technologies are needed for fuel extraction using feedstocks that do not threaten food security, cause minimal or no loss of natural habitat and soil carbon. At the same time, waste management has to be improved and environmental pollution should be minimized or eliminated. Liquid biofuels such as lignocellulosic‐based ethanol from plant biomass and algal‐based biodiesel are sustainable, alternative biofuels that could stabilize national security and provide clean energy for future generations. Ideally, the technology should also foster recycling of agricultural feedstocks and improve soil fertility and human health. This article provides updated information on the energy potential and breadth of liquid biofuel biotechnology.     

Advances in thermochemical conversion of woody biomass to energy,fuels and chemicals

Biomass has been recognised as a promising resource for future energy and fuels. The biomass, originated from plants, is renewable and application of its derived energy and fuels is close to carbon-neutral by considering that the growing plants absorb CO₂ for photosynthesis. However, the complex physical structure and chemical composition of the biomass significantly hinder its conversion to gaseous and liquid fuels.This paper reviews recent advances in biomass thermochemical conversion technologies for energy, liquid fuels and chemicals. Combustion process produces heat or heat and power from the biomass through oxidation reactions; however, this is a mature technology and has been successfully applied in industry. Therefore, this review will focus on the remaining three thermochemical processes, namely biomass pyrolysis, biomass thermal liquefaction and biomass gasification. For biomass pyrolysis, biomass pretreatment and application of catalysts can simplify the bio-oil composition and retain high yield. In biomass liquefaction, application of appropriate solvents and catalysts improves the liquid product quality and yield. Gaseous product from biomass gasification is relatively simple and can be further processed for useful products. Dual fluidised bed (DFB) gasification technology using steam as gasification agent provides an opportunity for achieving high hydrogen content and CO₂ capture with application of appropriate catalytic bed materials. In addition, multi-staged gasification technology, and integrated biomass pyrolysis and gasification as well as gasification for poly-generation have attracted increasing attention.     

Botanochemicals: Supplements to petrochemicals

The development of alternative sources for energy and chemicals, particularly the use of plant biomass as a renewable resource for fuel or chemical feedstocks has received much recent attention. This report reviews the chemical utilization of plant materials for liquid fuels or organic chemicals, and presents the possibility of producing hydrocarbon and related chemical products, directly or indirectly, from extant plants rather than from fossil sources such as petroleum or coal.     

Industrial exploitation of renewable resources: from ethanol production to bioproducts development

Plants, which are one of major groups of life forms, are constituted of an amazing number of molecules such as sugars, proteins, phenolic compounds etc. These molecules display multiple and complementary properties involved in various compartments of plants (structure, storage, biological activity etc.). The first uses of plants in industry were for food and feed, paper manufacturing or combustion. In the coming decades, these renewable biological materials will be the basis of a new concept: the "biorefiner" i.e. the chemical conversion of the whole plant to various products and uses. This concept, born in the 90ies, is analogous to today's petroleum refinery, which produces multiple fuels and derivative products from petroleum. Agriculture generates lots of co-products which were most often wasted. The rational use of these wasted products, which can be considered as valuable renewable materials, is now economically interesting and will contribute to the reduction of greenhouse has emissions by partially substituting for fossil fuels. Such substructures from biological waste products and transforming them into biofuels and new industrial products named "bioproducts". These compounds, such as bioplastics or biosurfactants, can replace equivalent petroleum derivatives. Towards that goal, lots of filamentous fungi, growing on a broad range of vegetable species, are able to produce enzymes adapted to the modification of these type of substrates. The best example, at least the more industrially developed to date, is the second generation biofuel technology using cellulose as a raw material. The process includes an enzymatic hydrolysis step which requires cellulases secreted from Trichoderma fungal species. This industrial development of a renewable energy will contribute to the diversification of energy sources used to transport and to the development of green chemistry which will partially substitute petrochemicals.     

Metabolic engineering of microbial pathways for advanced biofuels production

Production of biofuels from renewable resources such as cellulosic biomass provides a source of liquid transportation fuel to replace petroleum-based fuels. This endeavor requires the conversion of cellulosic biomass into simple sugars, and the conversion of simple sugars into biofuels. Recently, microorganisms have been engineered to convert simple sugars into several types of biofuels, such as alcohols, fatty acid alkyl esters, alkanes, and terpenes, with high titers and yields. Here, we review recently engineered biosynthetic pathways from the well-characterized microorganisms Escherichia coli and Saccharomyces cerevisiae for the production of several advanced biofuels.     

Selection, breeding and engineering of microalgae for bioenergy and biofuel production

Microalgal production technologies are seen as increasingly attractive for bioenergy production to improve fuel security and reduce CO(2) emissions. Photosynthetically derived fuels are a renewable, potentially carbon-neutral and scalable alternative reserve. Microalgae have particular promise because they can be produced on non-arable land and utilize saline and wastewater streams. Furthermore, emerging microalgal technologies can be used to produce a range of products such as biofuels, protein-rich animal feeds, chemical feedstocks (e.g. bioplastic precursors) and higher-value products. This review focuses on the selection, breeding and engineering of microalgae for improved biomass and biofuel conversion efficiencies.     

Current and Potential Biofuel Production from Plant Oils

Environmental concerns and depletion of fossil fuels along with government policies have led to the search for alternative fuels from various renewable and sustainable feedstocks. This review provides a critical overview of the chemical composition of common commercial plant oils, i.e., palm oil, olive oil, rapeseed oil, castor oil, WCO, and CTO and their recent trends toward potential biofuel production. Plant oils with a high energy content are primarily composed of triglycerides (generally >?95%), accompanied by diglycerides, monoglycerides, and free fatty acids. The heat content of plant oils is close to 90% for diesel fuels. The oxygen content is the most important difference in chemical composition between fossil oils and plant oils. Triglycerides can even be used directly in diesel engines. However, their high viscosity, low volatility, and poor cold flow properties can lead to engine problems. These problems require that plant oils need to be upgraded if they are to be used as a fuel in conventional diesel engines. Biodiesel, biooil, and renewable diesel are the three major biofuels obtained from plant oils. The main constraint associated with the production of biodiesel is the cost and sustainability of the feedstock. The renewable diesel obtained from crude tall oil is more sustainable than biofuels obtained from other feedstocks. The fuel properties of renewable diesel are similar to those of fossil fuels with reduced greenhouse gas emissions. In this review, the chemical composition of common commercial plant oils, i.e., palm oil, olive oil, rapeseed oil, castor oil, and tall oil, are presented. Both their major and minor components are discussed. Their compositions and fuel properties are compared to both fossil fuels and biofuels.     

Bacterial acetone and butanol production by industrial fermentation in the Soviet Union: use of hydrolyzed agricultural waste for biorefinery

Clostridial acetone–butanol fermentation from renewable carbohydrates used to be the largest biotechnological process second only to yeast ethanol fermentation and the largest process ever run under sterile conditions. With the rising prices for mineral oil, it has now the economical and technological potential to replace petrochemistry for the production of fuels from renewable resources. Various methods for using non-food biomass such as cellulose and hemicellulose in agricultural products and wastes have been developed at laboratory scale. To our knowledge, the AB plants in Russia were the only full-scale industrial plants which used hydrolyzates of lignocellosic waste for butanol fermentation. These plants were further developed into the 1980s, and the process was finally run in a continual mode different from plants in Western countries. A biorefinery concept for the use of all by-products has been elaborated and was partially put into practice. The experience gained in the Soviet Union forms a promising basis for the development of modern large-scale processes to replace a considerable fraction of the current chemical production of fuel for our future needs on a sustainable basis.     

A new dawn for industrial photosynthesis

Several emerging technologies are aiming to meet renewable fuel standards, mitigate greenhouse gas emissions, and provide viable alternatives to fossil fuels. Direct conversion of solar energy into fungible liquid fuel is a particularly attractive option, though conversion of that energy on an industrial scale depends on the efficiency of its capture and conversion. Large-scale programs have been undertaken in the recent past that used solar energy to grow innately oil-producing algae for biomass processing to biodiesel fuel. These efforts were ultimately deemed to be uneconomical because the costs of culturing, harvesting, and processing of algal biomass were not balanced by the process efficiencies for solar photon capture and conversion. This analysis addresses solar capture and conversion efficiencies and introduces a unique systems approach, enabled by advances in strain engineering, photobioreactor design, and a process that contradicts prejudicial opinions about the viability of industrial photosynthesis. We calculate efficiencies for this direct, continuous solar process based on common boundary conditions, empirical measurements and validated assumptions wherein genetically engineered cyanobacteria convert industrially sourced, high-concentration CO₂ into secreted, fungible hydrocarbon products in a continuous process. These innovations are projected to operate at areal productivities far exceeding those based on accumulation and refining of plant or algal biomass or on prior assumptions of photosynthetic productivity. This concept, currently enabled for production of ethanol and alkane diesel fuel molecules, and operating at pilot scale, establishes a new paradigm for high productivity manufacturing of nonfossil-derived fuels and chemicals.     

Oleaginous yeasts for biodiesel: Current and future trends in biology and production

Production of biodiesel from edible plant oils is quickly expanding worldwide to fill a need for renewable, environmentally-friendly liquid transportation fuels. Due to concerns over use of edible commodities for fuels, production of biodiesel from non-edible oils including microbial oils is being developed. Microalgae biodiesel is approaching commercial viability, but has some inherent limitations such as requirements for sunlight. While yeast oils have been studied for decades, recent years have seen significant developments including discovery of new oleaginous yeast species and strains, greater understanding of the metabolic pathways that determine oleaginicity, optimization of cultivation processes for conversion of various types of waste plant biomass to oil using oleaginous yeasts, and development of strains with enhanced oil production. This review examines aspects of oleaginous yeasts not covered in depth in other recent reviews. Topics include the history of oleaginous yeast research, especially advances in the early 20th century; the phylogenetic diversity of oleaginous species, beyond the few species commonly studied; and physiological characteristics that should be considered when choosing yeast species and strains to be utilized for conversion of a given type of plant biomass to oleochemicals. Standardized terms are proposed for units that describe yeast cell mass and lipid production.     

Energy production from biomass (Part 1): Overview of biomass

The use of renewable energy sources is becoming increasingly necessary, if we are to achieve the changes required to address the impacts of global warming. Biomass is the most common form of renewable energy, widely used in the third world but until recently, less so in the Western world. Latterly much attention has been focused on identifying suitable biomass species, which can provide high-energy outputs, to replace conventional fossil fuel energy sources. The type of biomass required is largely determined by the energy conversion process and the form in which the energy is required. In the first of three papers, the background to biomass production (in a European climate) and plant properties is examined. In the second paper, energy conversion technologies are reviewed, with emphasis on the production of a gaseous fuel to supplement the gas derived from the landfilling of organic wastes (landfill gas) and used in gas engines to generate electricity. The potential of a restored landfill site to act as a biomass source, providing fuel to supplement landfill gas-fuelled power stations, is examined, together with a comparison of the economics of power production from purpose-grown biomass versus waste-biomass. The third paper considers particular gasification technologies and their potential for biomass gasification.     

Plant triacylglycerols as feedstocks for the production of biofuels

Triacylglycerols produced by plants are one of the most energy-rich and abundant forms of reduced carbon available from nature. Given their chemical similarities, plant oils represent a logical substitute for conventional diesel, a non-renewable energy source. However, as plant oils are too viscous for use in modern diesel engines, they are converted to fatty acid esters. The resulting fuel is commonly referred to as biodiesel, and offers many advantages over conventional diesel. Chief among these is that biodiesel is derived from renewable sources. In addition, the production and subsequent consumption of biodiesel results in less greenhouse gas emission compared to conventional diesel. However, the widespread adoption of biodiesel faces a number of challenges. The biggest of these is a limited supply of biodiesel feedstocks. Thus, plant oil production needs to be greatly increased for biodiesel to replace a major proportion of the current and future fuel needs of the world. An increased understanding of how plants synthesize fatty acids and triacylglycerols will ultimately allow the development of novel energy crops. For example, knowledge of the regulation of oil synthesis has suggested ways to produce triacylglycerols in abundant non-seed tissues. Additionally, biodiesel has poor cold-temperature performance and low oxidative stability. Improving the fuel characteristics of biodiesel can be achieved by altering the fatty acid composition. In this regard, the generation of transgenic soybean lines with high oleic acid content represents one way in which plant biotechnology has already contributed to the improvement of biodiesel.     

Integration of microalgae cultivation with industrial waste remediation for biofuel and bioenergy production: opportunities and limitations

There is currently a renewed interest in developing microalgae as a source of renewable energy and fuel. Microalgae hold great potential as a source of biomass for the production of energy and fungible liquid transportation fuels. However, the technologies required for large-scale cultivation, processing, and conversion of microalgal biomass to energy products are underdeveloped. Microalgae offer several advantages over traditional 'first-generation' biofuels crops like corn: these include superior biomass productivity, the ability to grow on poor-quality land unsuitable for agriculture, and the potential for sustainable growth by extracting macro- and micronutrients from wastewater and industrial flue-stack emissions. Integrating microalgal cultivation with municipal wastewater treatment and industrial CO(2) emissions from coal-fired power plants is a potential strategy to produce large quantities of biomass, and represents an opportunity to develop, test, and optimize the necessary technologies to make microalgal biofuels more cost-effective and efficient. However, many constraints on the eventual deployment of this technology must be taken into consideration and mitigating strategies developed before large scale microalgal cultivation can become a reality. As a strategy for CO(2) biomitigation from industrial point source emitters, microalgal cultivation can be limited by the availability of land, light, and other nutrients like N and P. Effective removal of N and P from municipal wastewater is limited by the processing capacity of available microalgal cultivation systems. Strategies to mitigate against the constraints are discussed.     

Production of fuels and chemicals from renewable resources using engineered Escherichia coli

Biotechnological production of fuels and chemicals from renewable resources is an appealing way to move from the current petroleum-based economy to a biomass-based green economy. Recently, the feedstocks that can be used for bioconversion or fermentation have been expanded to plant biomass, microbial biomass, and industrial waste. Several microbes have been engineered to produce chemicals from renewable resources, among which Escherichia coli is one of the best studied. Much effort has been made to engineer E. coli to produce fuels and chemicals from different renewable resources. In this paper, we focused on E. coli and systematically reviewed a range of fuels and chemicals that can be produced from renewable resources by engineered E. coli. Moreover, we proposed how can we further improve the efficiency for utilizing renewable resources by engineered E. coli, and how can we engineer E. coli for utilizing alternative renewable feedstocks. e.g. C1 gases and methanol. This review will help the readers better understand the current progress in this field and provide insights for further metabolic engineering efforts in E. coli.     

Bioethanol

Alternatives to petroleum-derived fuels are being sought in order to reduce the world's dependence on non-renewable resources. The most common renewable fuel today is ethanol derived from corn grain (starch) and sugar cane (sucrose). It is expected that there will be limits to the supply of these raw materials in the near future, therefore lignocellulosic biomass is seen as an attractive feedstock for future supplies of ethanol. However, there are technical and economical impediments to the development of a commercial processes utilizing biomass. Technologies are being developed that will allow cost-effective conversion of biomass into fuels and chemicals. These technologies include low-cost thermochemical pretreatment, highly effective cellulases and hemicellulases and efficient and robust fermentative microorganisms. Many advances have been made over the past few years that make commercialization more promising.     

Anaerobic biotechnological approaches for production of liquid energy carriers from biomass

In recent years, increasing attention has been paid to the use of renewable biomass for energy production. Anaerobic biotechnological approaches for production of liquid energy carriers (ethanol and a mixture of acetone, butanol and ethanol) from biomass can be employed to decrease environmental pollution and reduce dependency on fossil fuels. There are two major biological processes that can convert biomass to liquid energy carriers via anaerobic biological breakdown of organic matter: ethanol fermentation and mixed acetone, butanol, ethanol (ABE) fermentation. The specific product formation is determined by substrates and microbial communities available as well as the operating conditions applied. In this review, we evaluate the recent biotechnological approaches employed in ethanol and ABE fermentation. Practical applicability of different technologies is discussed taking into account the microbiology and biochemistry of the processes.     

生物柴油原料资源高油脂微藻的开发利用

生物柴油作为化石能源的替代燃料已在国际上得到广泛应用。至今生物柴油的原料主要来自油料植物, 但与农作物争地的情况以及较高的原料成本限制了生物柴油的进一步推广。微藻作为高光合生物有其特殊的原料成本优势, 微藻的脂类含量最高可达细胞干重的80%。利用生物技术改良微藻, 获得的高油脂基因工程微藻经规模养殖, 可大大降低生物柴油原料成本。介绍了国内外生物柴油的应用现状, 阐述了微藻作为生物柴油原料的优势, 对基因工程技术调控微藻脂类代谢途径的研究进展, 以及在构建工程微藻中面临的问题和应采取的对策进行了综述和展望。     

Meeting the challenge of food and energy security

Growing crops for bioenergy or biofuels is increasingly viewed as conflicting with food production. However, energy use continues to rise and food production requires fuel inputs, which have increased with intensification. Focussing on the question of food or fuel is thus not helpful. The bigger, more pertinent, challenge is how the increasing demands for food and energy can be met in the future, particularly when water and land availability will be limited. Energy crop production systems differ greatly in environmental impact. The use of high-input food crops for liquid transport fuels (first-generation biofuels) needs to be phased out and replaced by the use of crop residues and low-input perennial crops (second/advanced-generation biofuels) with multiple environmental benefits. More research effort is needed to improve yields of biomass crops grown on lower grade land, and maximum value should be extracted through the exploitation of co-products and integrated biorefinery systems. Policy must continually emphasize the changes needed and tie incentives to improved greenhous gas reduction and environmental performance of biofuels.     

Commercial cellulosic ethanol: The role of plant-expressed enzymes

The use and production of biofuels has risen dramatically in recent yr. Bioethanol comprises 85% of total global biofuels production, with benefits including reduction of greenhouse gas emissions and promotion of energy independence and rural economic development. Ethanol is primarily made from corn grain in the USA and sugarcane juice in Brazil. However, ethanol production using current technologies will ultimately be limited by land availability, government policy, and alternative uses for these agricultural products. Biomass feedstocks are an enormous and renewable source of fermentable sugars that could potentially provide a significant proportion of transport fuels globally. A major technical challenge in making cellulosic ethanol economically viable is the need to lower the costs of the enzymes needed to convert biomass to fermentable sugars. The expression of cellulases and hemicellulases in crop plants and their integration with existing ethanol production systems are key technologies under development that will significantly improve the process economics of cellulosic ethanol production.     

An overview of microwave hydrothermal carbonization and microwave pyrolysis of biomass

Biomass utilization has received much attention for production of high density solid fuels. Utilization of cheap and naturally available precursors through environmentally friendly and effective processes is an attractive and emerging research area. Pyrolysis and hydrothermal carbonization (HTC) are well-known technologies available for production of solid biofuel using conventional or microwave heating. Microwave heating is a simpler and more efficient heating method than conventional heating. This study presents a critical review on microwave pyrolysis and microwave HTC for solid fuel production in terms of yield and quality of products. Moreover, a brief summary of parameters of microwave pyrolysis and microwave HTC are discussed. The fuel, chemical, structural and thermal weight loss characteristics of solid fuels produced from different biomass are discussed and compared.