Evaluation of glucose sensitive affinity binding assay entrapped in fluorescent dissolved‐core alginate microspheres

The feasibility of dissolved‐core alginate‐templated fluorescent microspheres as “smart tattoo” glucose biosensors was investigated in simulated interstitial fluid (SIF). The sensor works on the principle of competitive binding and fluorescence resonance energy transfer. The sensor consists of multilayer thin film coated alginate microspheres incorporating dye‐labeled glucose receptor and competing ligand within the partially dissolved alginate core. In this study, different approaches for the sensing and detection chemistry were studied, and the response of encapsulated reagents was compared with the solution‐phase counterparts. The glucose sensitivity of the encapsulated TRITC‐Con A/FITC‐dextran (500 kDa) assay in DI water was estimated to be 0.26%/mM glucose while that in SIF was observed to be 0.3%/mM glucose. The glucose sensitivity of TRITC‐apo‐GOx/FITC‐dextran (500 kDa) assay was estimated to be 0.33%/mM glucose in DI water and 0.5%/mM glucose in SIF and both demonstrated a response in the range of 0–50 mM glucose. Therefore, it is hypothesized that the calcium ion concentration outside the microsphere (in the SIF) does not interfere with the response sensitivity. The sensor response was observed to exhibit a maximum response time of 120 s. The system further exhibited a sensitivity of 0.94%/mM glucose with a response in range of 0–50 mM glucose, using near‐infrared dyes (Alexa Fluor‐647‐labeled dextran as donor and QSY‐21‐conjugated apo‐GOx as acceptor), thereby making the sensor more amenable to in vivo use, when implanted in scattering tissue. Biotechnol. Bioeng. 2009; 104: 1075–1085. © 2009 Wiley Periodicals, Inc.     

Quantitative multiphoton spectral imaging and its use for measuring resonance energy transfer

Protein labeling with green fluorescent protein derivatives has become an invaluable tool in cell biology. Protein quantification, however, is difficult when cells express constructs with overlapping fluorescent emissions. Under these conditions, signal separation using emission filters is inherently inefficient. Spectral imaging solves this problem by recording emission spectra directly. Unfortunately, linear unmixing, the algorithm used for quantifying individual fluorophores from emission spectra, fails when resonance energy transfer (RET) is present. We therefore sought to develop an unmixing algorithm that incorporates RET. An equation for spectral emission incorporating RET was derived and an assay based on this formalism, spectral RET (sRET), was developed. Standards with defined RET efficiencies and with known Cerulean/Venus ratios were constructed and used to test sRET. We demonstrate that sRET analysis is a comprehensive, photon-efficient method for imaging RET efficiencies and accurately determines donor and acceptor concentrations in living cells.     

A novel fluorescence competitive assay for glucose determinations by using a thermostable glucokinase from the thermophilic microorganism Bacillus stearothermophilus

We describe the use of a thermostable glucokinase in a novel competitive fluorescence assay for glucose. Glucokinase from Bacillus stearothermophilus (BSGK) was found to retain enzymatic activity in solution for over 20 days. The single cysteine residue in BSGK, which is near the active site, was labeled with a fluorescent probe, 2-(4-iodoacetamidoanilino)naphthalene-6-sulfonic acid. The ANS-labeled BSGK displayed a modest 25% decrease in the emission intensity upon binding glucose but no change in lifetime. To obtain a larger spectral change we developed a competitive assay for glucose using the intrinsic tryptophan fluorescence from BSGK and a resonance energy transfer (RET) acceptor-labeled sugar. The sugar-labeled acceptor quenched the BSGK tryptophan emission, and the quenching was reversed upon addition of glucose. The use of RET as the sensing mechanism can be easily extended to longer wavelengths for a more practical glucose sensor.     

Quantitation of fluorescence energy transfer between cell surface proteins via fluorescence donor photobleaching kinetics.

We describe practical aspects of photobleaching fluorescence energy transfer measurements on individual living cells. The method introduced by T. M. Jovin and co-workers (see, most recently, Kubitscheck et al. 1993. Biophys. J. 64:110) is based on the reduced rate of irreversible photobleaching of donor fluorophores when acceptor fluorophores are present. Measuring differences in donor photobleaching rates on cells labeled with donor only (fluorescein isothiocyanate-conjugated proteins) and with both donor and acceptor (tetramethylrhodamine-conjugated proteins) allows calculation of the fluorescence energy transfer efficiency. We assess possible methods of data analysis in light of the underlying processes of photobleaching and energy transfer and suggest optimum strategies for this purpose. Single murine B lymphocytes binding various ratios of donor and acceptor conjugates of tetravalent concanavalin A (Con A) and divalent succinyl Con A were examined for interlectin energy transfer by these methods. For Con A, a maximum transfer efficiency of 0.49 +/- 0.02 was observed. Under similar conditions flow cytometric measurements of donor quenching yielded a value of 0.54 +/- 0.03. For succinyl Con A, the maximum transfer efficiency was 0.36. To provide concrete examples of quantities arising in such energy transfer determinations, we present examples of individual cell data and kinetic analyses, population rate constant distributions, and error estimates for the various quantities involved.     

Near-infrared fluorescence lifetime assay for serum glucose based on allophycocyanin-labeled concanavalin A

We describe an assay scheme for glucose based on fluorescence resonance energy transfer (FRET) between concanavalin A (con A), labeled with the near-infrared fluorescent protein allophycocyanin (APC) as donor, and dextran labeled with malachite green (MG) as acceptor. Glucose competitively displaces dextran-MG and leads to reduction in FRET, assessed by time-domain fluorescence lifetime measurements using time-correlated single-photon counting. The assay is operative in the glucose concentration range 2.5-30 mM, and therefore suitable for use in monitoring diabetes control. Albumin and serum inhibit FRET but the interference can be prevented by removal of high molecular weight substances by membrane filters. APC shows promise for incorporation in an implanted glucose sensor which can be interrogated from outside the body.     

Engineering resonance energy transfer for advanced immunoassays: the case of celiac disease

Celiac disease (CD) is an immune-mediated disorder affecting genetically predisposed subjects. It is caused by the ingestion of wheat gluten and related prolamins. A final diagnosis for this disease can be obtained by examination of jejunal biopsies. Nevertheless, different analytical approaches have been established to detect the presence of anti-tissue transglutaminase antibodies that represent a serological hallmark of the disease. In this work, we explored a new method for the diagnosis of CD based on the detection of serum anti-transglutaminase antibodies by resonance energy transfer (RET) between donor molecules and acceptor molecules. In particular, we labeled the liver transglutaminase (tTG) enzyme from guinea pig and the rabbit anti-tTG antibodies with a couple of fluorescence probes that are able to make RET if they are located within with Förster distance. We labeled tTG with the fluorescence probe DyLight 594 as donor and the anti-tTG antibodies with the fluorescence probe DyLight 649 as acceptor. However, due to the large size of the formed complex (tTG/anti-tTG), and consequently to the low efficiency energy transfer process between the donor–acceptor molecules, we explored a new experimental approach that allows us to extend the utilizable range of RET between donor:acceptor pairs by using one single molecule as donor and multiple molecules as energy acceptors, instead of using a single acceptor molecule as usually occurs in RET experiments. The obtained results clearly show that the use of one donor and multiacceptor strategy enables for a simple and rapid detection of serum anti-transglutaminase antibodies. In addition, our results point out that it is possible to consider this approach as a new method for a wide variety of analytical assays.     

Down regulation of macrophage mannose/N-acetylglucosamine receptors by elevated glucose concentrations

The binding of the 125I-induced neoglycoprotein mannosyl-bovine serum albumin (Man-albumin) to peptone-elicited murine peritoneal macrophages was examined. Binding studies demonstrated that the extent of receptor activity for Man-albumin depended upon the glucose concentration of the medium in which the cells were cultured following peritoneal lavage and prior to the binding assay. Macrophages cultured in a medium containing a high glucose concentration (25 mM or greater) prior to the binding assay, consistently showed a reduced capacity for binding Man-albumin as compared to cells cultured in the presence of low glucose (5 mM). These results were obtained in a variety of tissue culture media or when the same medium was employed with differing amounts of added glucose (5, 25 and 50 mM). Cell toxicity and/or death was not the cause of the reduced receptor activity of macrophages cultured in high glucose as determined by morphology. Trypan blue exclusion, and the ability of these cells to actively phagocytose IgG-coated sheep red blood cells to an extent identical with those cells cultured in low glucose. Saturation binding studies and Scatchard analysis of the data demonstrated that the decreased level of binding observed with cells cultured in high glucose was the result of a reduced number of receptors and not altered receptor affinity. These studies suggest that an increased glucose concentration, such as in diabetes mellitus, can downshift the expression of the mannose/N-acetylglucosamine receptor on murine peritoneal macrophages.     

Flow cytometric measurement of fluorescence resonance energy transfer on cell surfaces. Quantitative evaluation of the transfer efficiency on a cell-by-cell basis

A method has been developed for the determination of the efficiency (E) of the fluorescence resonance energy transfer between moieties on cell surfaces by use of a computer-controlled flow cytometer capable of dual wavelength excitation. The absolute value of E may be calculated on a single-cell basis. The analysis requires the measurement of samples stained with donor and acceptor conjugated ligands alone as well as together. In model experiments HK 22 murine lymphoma cells labeled with fluorescein-conjugated concanavalin A (Con A) and/or rhodamine conjugated Con A were used to determine energy transfer histograms. Using the analytic solution to energy transfer in two dimensions, a high surface density of Con A binding sites was found that suggests that the Con A receptor sites on the cell surface are to a degree preclustered . We call this technique flow cytometric energy transfer ( FCET ).     

Fluorescence resonance energy transfer study of the associative state of membrane-bound complexes of complement proteins C5b-8

Human complement protein C8 was labeled with the fluorescent chromophores fluorescein-5-isothiocyanate (FITC), 3-(4-isothiocyanatophenyl)-7-diethylamine-4-methyl coumarin (IPM), eosin-5-isothiocyanate (EOS), or Texas Red (sulforhodamine-101-sulfonyl chloride; TR) with only minor reduction in the specific hemolytic activity of the protein. The distribution of C5b-8 complexes bound to sheep erythrocyte membranes was investigated by monitoring fluorescence resonance energy transfer (RET) between the following RET donor/acceptor pairs of labeled C8: FITC-C8/EOS-C8, IPM-C8/EOS-C8, and FITC-C8/TR-C8. On binding to membranes containing pre-formed C5b67 complexes, specific RET was detected for each of the donor/acceptor pairs of labeled C8 investigated. In contrast, no energy transfer was observed for these RET donor/acceptor pairs of labeled C8 incubated in the presence of control membranes or in membrane-free solution. On the basis of a consideration of the transfer efficiency that would be expected for donor/acceptor pairs of labeled C8 that were uniformly dispersed on the membrane surface, these results suggest that C5b-8 complexes are aggregated into polymeric clusters when membrane-bound. The efficiency of donor-C8 to acceptor-C8 RET--and the hemolytic activity of membrane-bound C5b-8 (in the absence of C9)--are both related to the surface density of membrane-bound C5b67, suggesting that the physical clustering of the membrane-inserted C5b-8 complex may be related to the expression of its cytolytic activity.     

Synthesis and evaluation of conformationally restricted inhibitors of aspartate semialdehyde dehydrogenase

Inhibitors of the enzyme aspartate semialdehyde dehydrogenase, a key biological target for the generation of a new class of antibiotic compounds, have been developed. To investigate improvements to binding within an inhibitor series, the lowering of the entropic barrier to binding through conformational restriction was investigated. A library of linear and cyclic substrate analogues was generated and computational docking used to aid in structure selection. The cyclic phosphonate inhibitor 18 was thus identified as complimentary to the enzyme active-site. Synthesis and in vitro inhibition assay revealed a K(i) of 3.8 mM against natural substrate, where the linear analogue of 18, compound 15, had previously shown no inhibitory activity. Two further inhibitors, phosphate analogue diastereoisomers 17a and 17b, were synthesised and also found to have low millimolar K(i) values. As a result of the computational docking investigations, a novel substrate binding interaction was discovered: hydrogen bonding between the substrate (phosphate hydroxy-group as the hydrogen bond donor) and the NADPH cofactor (2'-oxygen as the hydrogen bond acceptor).     

On the possibility of long-wavelength long-lifetime high-quantum-yield luminophores

We describe an approach to creating a new class of luminophores which display both long wavelength emissions exceeding 600 nm and long lifetimes. These luminophores are based on resonance energy transfer (RET) from a long lifetime donor to a short lifetime but long wavelength acceptor. We demonstrated the possibility of obtaining these desirable spectral properties using donors and acceptors noncovalently bound to DNA. The donor was a ruthenium (Ru) metal-ligand complex in which one of the diimine ligands intercalated into double-helix DNA. The acceptors were either nile blue, TOTO-3, or TO-PRO-3. Upon binding of the acceptor to donor-labeled DNA, we found that the acceptor quantum yield was remarkably enhanced so that the wavelength-integrated intensities of the donor and acceptor bound to DNA were many-fold greater than the intensity of the donor and acceptor alone when separately bound to DNA. The origin of this effect is efficient energy transfer from the donor. Under these conditions the effective overall quantum yield approaches that of the acceptor. Importantly, the increased quantum yield can be obtained while maintaining usefully long apparent acceptor lifetimes of 30 to 80 ns. The effect of an increased quantum yield from a low quantum yield donor may find use in assays to detect macromolecular binding interactions. These results suggest the synthesis of covalently linked donor-acceptor pairs with the desirable spectral properties of long wavelength emission, high quantum yield, and moderately long lifetimes for gated detection.     

Resonance energy transfer microscopy: observations of membrane-bound fluorescent probes in model membranes and in living cells

A conventional fluorescence microscope was modified to observe the sites of resonance energy transfer (RET) between fluorescent probes in model membranes and in living cells. These modifications, and the parameters necessary to observe RET between membrane-bound fluorochromes, are detailed for a system that uses N-4-nitrobenzo-2-oxa-1,3-diazole (NBD) or fluorescein as the energy donor and sulforhodamine as the energy acceptor. The necessary parameters for RET in this system were first optimized using liposomes. Both quenching of the energy donor and sensitized fluorescence of the energy acceptor could be directly observed in the microscope. RET microscopy was then used in cultured fibroblasts to identify those intracellular organelles labeled by the lipid probe, N-SRh-decylamine (N-SRh-C10). This was done by observing the sites of RET in cells doubly labeled with N-SRh-C10 and an NBD-labeled lipid previously shown to label the endoplasmic reticulum, mitochondria, and nuclear envelope. RET microscopy was also used in cells treated with fluorescein-labeled Lens culinaris agglutinin and a sulforhodamine derivative of phosphatidylcholine to examine the internalization of plasma membrane lipid and protein probes. After internalization, the fluorescent lectin resided in most, but not all of the intracellular compartments labeled by the fluorescent lipid, suggesting sorting of the membrane-bound lectin into a subset of internal compartments. We conclude that RET microscopy can co-localize different membrane-bound components at high resolution, and may be particularly useful in examining temporal and spatial changes in the distribution of fluorescent molecules in membranes of the living cell.     

Competitive binding of acetate and chloride in photosystem II.

The binding of chloride and acetate to photosystem II (PSII) was examined to elucidate the mechanism of acetate inhibition. The mode of inhibition was studied, and individual binding sites were assigned by steady-state O2 evolution measurements in correlation with electron paramagnetic resonance (EPR) results. Two binding sites were found for acetate, one chloride-sensitive on the electron donor side and one chloride-insensitive on the electron acceptor side. The respective binding constants were as follows: KCl = 0.5 +/- 0.2 mM (chloride binding to the donor side), KI = 16 +/- 5 mM (acetate binding to the donor side), and KI' = 130 +/- 40 mM (acetate binding to the acceptor side). When acetate was bound to the acceptor side of PSII, 200 K illumination induced a narrowed form of the QA-FeII EPR signal, the yield of which was independent of the chloride concentration. When acetate was bound to the donor side, room-temperature illumination produced the S2YZ* state. EPR measurements showed that both the yield and formation rate of this state increased with acetate concentration. Increasing chloride concentrations slowed the rate of formation of the S2YZ* state, but did not affect the steady-state yield of the S2YZ* state. These findings indicate that the light-induced reactions in acetate-inhibited PSII are modulated by both donor side and acceptor side binding of acetate, while the steady-state yield of the S2YZ* state at the high PSII concentrations used for EPR measurements depends primarily on acceptor side turnover. Our data further support a close proximity of chloride to YZ*, indicating a possible role for chloride in the electron-transfer mechanism at the O2-evolving complex.     

A new type of phosphorescent nanospheres for use in advanced time-resolved multiplexed bioassays

A new concept to design phosphorescent nanospheres is presented. The spheres are distinguishable by their individual decay time and spectral distribution of their emission spectra. They are composed of a phosphorescent ruthenium metal-ligand complex (MLC) dissolved, along with certain strongly fluorescent cyanine dyes, in modified polyacrylonitrile-based nanospheres. Since the emission spectrum of the MLC overlaps the absorption spectrum of the cyanine and both the MLC (the donor) and the cyanine (the acceptor) are in close spatial proximity, efficient resonance energy transfer (RET) does occur. Thus, the nanospheres emit dual luminescence, one from the acceptor dye and the other from the donor MLC. Variation of the concentrations of the acceptor dye results in a varying efficiency of RET, thus making the spheres distinguishable. Hence, a set of multiplexable sphere labels is obtained by using one MLC (acting as the phosphorescent donor and present in constant concentration) and one acceptor dye (which varies in terms of both spectral properties and concentration). The nanospheres can be identified by the emission maximum (reflecting the kind of acceptor dye) and by decay time (reflecting its concentration). Since the same donor MLC is used throughout, all nanospheres can be excited with the same light source.     

Conformations within soluble oligomers and insoluble aggregates revealed by resonance energy transfer

A fluorescently labeled 20‐residue polyglutamic acid (polyE) peptide 20 amino acid length polyglutamic acid (E₂₀) was used to study structural changes which occur in E₂₀ as it co‐aggregates with other unlabeled polyE peptides. Resonance energy transfer (RET) was performed using an o‐aminobenzamide donor at the N‐terminus and 3‐nitrotyrosine acceptor at the C‐terminus of E₂₀. PolyE aggregates were not defined as amyloid, as they were nonfibrillar and did not bind congo red. Circular dichroism measurements indicate that polyE aggregation involves a transition from α‐helical monomers to aggregated β‐sheets. Soluble oligomers are also produced along with aggregates in the reaction, as determined through size exclusion chromatography. Time‐resolved and steady‐state RET measurements reveal four dominant E₂₀ conformations: (1) a partially collapsed conformation (24 Å donor–acceptor distance) in monomers, (2) an extended conformation in soluble oligomers (>29 Å donor–acceptor distance), (3) a minor partially collapsed conformation (22 Å donor‐acceptor distance) in aggregates, and (4) a major highly collapsed conformation (13 Å donor–acceptor distance) in aggregates. These findings demonstrate the use of RET as a means of determining angstrom‐level structural details of soluble oligomer and aggregated states of proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 299–317, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A new biosensor for glucose determination in serum based on up-converting fluorescence resonance energy transfer

In this work, a new glucose sensor based on up-converting fluorescence resonance energy transfer (UC-FRET) was developed. Up-converting phosphors (UCPs, NaYF(4): Yb, Er), which were covalently labeled with Concanavalin A (ConA), were used as the energy donor with thiolated β-cyclodextrins (SH-β-CDs) functionalized gold nanoparticles as the energy acceptor. Due to the combination between ConA and SH-β-CDs, the energy donor and the acceptor were brought to close proximity, resulting in the quenching of the fluorescence of UCPs by gold nanoparticles. In the presence of glucose which competed with SH-β-CDs towards the binding sites of ConA, the biosensor (UCPs-ConA-SH-β-CDs-Au) was decomposed and the energy donor was separated from the acceptor. Therefore, the fluorescence of UCPs was restored dependent on the concentration of glucose. The increase of UCPs fluorescence intensity was proportional to glucose concentration within the range from 0.4 μM to 10μM in aqueous buffer, with a limit of detection (LOD) of 0.043 μM. A same linear range of glucose concentration was obtained in a human serum matrix (which was pretreated and thus contained no glucose) with a slightly higher LOD (0.065 μM). The glucose sensor was applied to real human serum samples with the results consistent with that of a classic hexokinase (HK) method, indicating that the UC-FRET biosensor was competent for directly sensing glucose in serum samples without optical interference, which benefited from the near infrared (NIR) excitation nature of UCPs. The results of this work suggested that the UC-FRET technique could be a promising alternative for detecting biomolecules in complex biological sample matrixes for diagnostic purposes.     

Fluorescence-based glucose sensors

There is an urgent need to develop technology for continuous in vivo glucose monitoring in subjects with diabetes mellitus. Problems with existing devices based on electrochemistry have encouraged alternative approaches to glucose sensing in recent years, and those based on fluorescence intensity and lifetime have special advantages, including sensitivity and the potential for non-invasive measurement when near-infrared light is used. Several receptors have been employed to detect glucose in fluorescence sensors, and these include the lectin concanavalin A (Con A), enzymes such as glucose oxidase, glucose dehydrogenase and hexokinase/glucokinase, bacterial glucose-binding protein, and boronic acid derivatives (which bind the diols of sugars). Techniques include measuring changes in fluorescence resonance energy transfer (FRET) between a fluorescent donor and an acceptor either within a protein which undergoes glucose-induced changes in conformation or because of competitive displacement; measurement of glucose-induced changes in intrinsic fluorescence of enzymes (e.g. due to tryptophan residues in hexokinase) or extrinsic fluorophores (e.g. using environmentally sensitive fluorophores to signal protein conformation). Non-invasive glucose monitoring can be accomplished by measurement of cell autofluorescence due to NAD(P)H, and fluorescent markers of mitochondrial metabolism can signal changes in extracellular glucose concentration. Here we review the principles of operation, context and current status of the various approaches to fluorescence-based glucose sensing.     

Resonance energy transfer imaging of phospholipid vesicle interaction with a planar phospholipid membrane: undulations and attachment sites in the region of calcium-mediated membrane--membrane adhesion

Membrane fusion of a phospholipid vesicle with a planar lipid bilayer is preceded by an initial prefusion stage in which a region of the vesicle membrane adheres to the planar membrane. A resonance energy transfer (RET) imaging microscope, with measured spectral transfer functions and a pair of radiometrically calibrated video cameras, was used to determine both the area of the contact region and the distances between the membranes within this zone. Large vesicles (5-20 microns diam) were labeled with the donor fluorophore coumarin- phosphatidylethanolamine (PE), while the planar membrane was labeled with the acceptor rhodamine-PE. The donor was excited with 390 nm light, and separate images of donor and acceptor emission were formed by the microscope. Distances between the membranes at each location in the image were determined from the RET rate constant (kt) computed from the acceptor:donor emission intensity ratio. In the absence of an osmotic gradient, the vesicles stably adhered to the planar membrane, and the dyes did not migrate between membranes. The region of contact was detected as an area of planar membrane, coincident with the vesicle image, over which rhodamine fluorescence was sensitized by RET. The total area of the contact region depended biphasically on the Ca2+ concentration, but the distance between the bilayers in this zone decreased with increasing [Ca2+]. The changes in area and separation were probably related to divalent cation effects on electrostatic screening and binding to charged membranes. At each [Ca2+], the intermembrane separation varied between 1 and 6 nm within each contact region, indicating membrane undulation prior to adhesion. Intermembrane separation distances < or = 2 nm were localized to discrete sites that formed in an ordered arrangement throughout the contact region. The area of the contact region occupied by these punctate attachment sites was increased at high [Ca2+]. Membrane fusion may be initiated at these sites of closest membrane apposition.     

Study of real-time lectin-carbohydrate interactions on the surface of a quartz crystal microbalance

A quartz crystal microbalance (QCM) biosensor system for lectin-carbohydrate interactions has been developed. Yeast mannan was immobilised on polystyrene-coated quartz crystals, and interactions tested with the lectin concanavalin A (Con A). The biosensor could be easily operated, where mannan immobilisation and all binding analyses were performed in real-time using a flow-through system. The apparent binding constant for yeast mannan to Con A was estimated to be 0.4 microM, well in accordance to reported literature values. In addition, the effective concentration values (EC50-values) for a series of mannose/mannoside ligands, acting as competitors to the mannan/Con A interaction, were determined to range from 0.18 to 5.3 mM, in good correlation with a related enzyme-labelled lectin assay (ELLA) protocol.     

Effects of metallic silver particles on resonance energy transfer in labeled bovine serum albumin

Resonance energy transfer (RET) is widely used to detect proximity between biomolecules. In transparent solution the maximum donor-to-acceptor distance for RET is about 70 A. We measured the effects of metallic silver island films on RET from the intrinsic tryptophan of a protein to a bound probe as the acceptor. These preliminary experiments revealed a dramatic increase in the apparent F?rster distance increasing from 28.6 to 63 A. These results suggest the use of silver island films for detecting long range proximity between biomolecules and for biotechnology applications based on RET.