The Potential of Bacterial Isolates for Emulsification with a Range of Hydrocarbons

A study was undertaken to investigate the distribution of biosurfactant producing and crude oil degrading bacteria in the oil contaminated environment. This research revealed that hydrocarbon contaminated sites are the potent sources for oil degraders. Among 32 oil degrading bacteria isolated from ten different oil contaminated sites of gasoline and diesel fuel stations, 80% exhibited biosurfactant production. The quantity and emulsification activity of the biosurfactants varied. Pseudomonas sp. DS10‐129 produced a maximum of 7.5 ± 0.4 g/l of biosurfactant with a corresponding reduction in surface tension from 68 mN/m to 29.4 ± 0.7 mN/m at 84 h incubation. The isolates Micrococcus sp. GS2‐22, Bacillus sp. DS6‐86, Corynebacterium sp. GS5‐66, Flavobacterium sp. DS5‐73, Pseudomonas sp. DS10‐129, Pseudomonas sp. DS9‐119 and Acinetobacter sp. DS5‐74 emulsified xylene, benzene, n‐hexane, Bombay High crude oil, kerosene, gasoline, diesel fuel and olive oil. The first five of the above isolates had the highest emulsification activity and crude oil degradation ability and were selected for the preparation of a mixed bacterial consortium, which was also an efficient biosurfactant producing oil emulsifying and degrading culture. During this study, biosurfactant production and emulsification activity were detected in Moraxella sp., Flavobacterium sp. and in a mixed bacterial consortium, which have not been reported before.     

Production and partial characterization of biosurfactant produced by crude oil degrading bacteria

Production of biosurfactant by crude oil degrading bacteria for use in microbial enhanced oil recovery was investigated. Crude oil utilizing bacteria were isolated from soil by enrichment method on oil agar at 30 °C for 5 days. The isolates were identified and screened for biosurfactant production using blood haemolysis and emulsification tests. IR and GC–MS analyses were carried out to detect the type of biosurfactant. The biosurfactant was purified and its stability at various pH, temperature and salinity levels was studied. The organisms were identified as: Achromobacter xylosoxidans subspecies xylosoxidans, Bacillus licheniformis, Proteus vulgaris, Proteus mirabilis, Serratia marcescens, Sphingomonas paucimobilis and Micrococcus kristinae. Emulsification test (E₂₄) revealed that Serratia marcescens had the highest emulsification index of 87%. GC–MS indicated the biosurfactants as lipopeptides. The biosurfactant can be used in EOR under various environmental conditions.     

Inoculation of 1-aminocyclopropane-1-carboxylate deaminase–producing bacteria along with biosurfactant application enhances the phytoremediation efficiency of Medicago sativa in hydrocarbon-contaminated soils

Phytoremediation efficiency of Alfa alfa (Medicago sativa) was evaluated in hydrocarbon-contaminated soil with the combined application of 1-aminocyclopropane-1-carboxylate (ACC) deaminase–producing Bacillus sp. PVMX4 and an isolated biosurfactant from this strain. Results on the plant growth–promoting (PGP) traits of Bacillus sp. PVMX4 revealed that phosphate (P) solubilization, indole-3-acetic acid (IAA) production, and ACC deaminase activity were not affected by low-concentration hydrocarbon amendment in the form of crude oil. Bacillus sp. PVMX4 was able to utilize crude oil as a sole carbon source in mineral salt medium (MSM), and this strain synthesized significant quantities of biosurfactant in growth medium quantified by an emulsification index of 69.2 EI_24% and surface tension reduction of 26.2 mN/m at the end of the experimental period. Biosurfactant, when partially purified and characterized by thin-layer chromatography (TLC) and Fourier transform infrared spectroscopy (FT-IR), revealed it to be a lipopeptide-type biosurfactant. Pilot-scale phytoremediation studies conducted under growth chamber conditions in hydrocarbon-contaminated soil using Medicago sativa along with combined application of ACC deaminase–containing bacteria and biosurfactant recorded 76.4% hydrocarbon degradation.     

Biosurfactant production by Corynebacterium kutscheri from waste motor lubricant oil and peanut oil cake

AIM: Production and characterization of biosurfactant from renewable sources. METHODS AND RESULTS: Biosurfactant production was carried out in 3-l fermentor using waste motor lubricant oil and peanut oil cake. Maximum biomass (9.8 mg ml(-l)) and biosurfactant production (6.4 mg ml(-l)) occurred with peanut oil cake at 120 and 132 h, respectively. Chemical characterization of the biosurfactant revealed that it is a glycolipopeptide with chemical composition of carbohydrate (40%), lipid (27%) and protein (29%). The biosurfactant is able to emulsify waste motor lubricant oil, crude oil, peanut oil, kerosene, diesel, xylene, naphthalene and anthracene; the emulsification activity was comparatively higher than the activity found with Triton X-100. CONCLUSION: This study indicates the possibility of biosurfactant production using renewable, relatively inexpensive and easily available resources like waste motor lubricant oil and peanut oil cake. Emulsification activity found with the biosurfactant against different hydrocarbons showed the possibility of the application of biosurfactants against diverse hydrocarbon pollution. SIGNIFICANCE AND IMPACT OF THE STUDY: The data obtained from the study could be useful for large-scale biosurfactant production using economically cheaper substrates. Information obtained in emulsification activity and laboratory-scale experiment on bioremediation inferred that bioremediation of hydrocarbon-polluted sites may be treated with biosurfactants or the bacteria that produces it.     

Production and characterization of a glycolipid biosurfactant from Bacillus megaterium using economically cheaper sources

Criteria selected for screening of biosurfactant production by Bacillus megaterium were hemolytic assay, bacterial cell hydrophobicity and the drop-collapse test. The data on hemolytic activity, bacterial cell adherence with crude oil and the drop-collapse test confirmed the biosurfactant-producing ability of the strain. Accordingly, the strain was cultured at different temperatures, pH values, salinity and substrate (crude oil) concentration in mineral salt medium to establish the optimum culture conditions, and it was shown that 38°C, 2.0% of substrate concentration, pH 8.0 and 30‰ of salt concentration were optimal for maximum growth and biosurfactant production. Laboratory scale biosurfactant production in a fermentor was done with crude oil and cheaper carbon sources like waste motor lubricant oil and peanut oil cake, and the highest biosurfactant production was found with peanut oil cake. Characterization of partially purified biosurfactant inferred that it was a glycolipid with emulsification potential of waste motor lubricant oil, crude oil, peanut oil, diesel, kerosene, naphthalene, anthracene and xylene.     

A novel crude oil emulsifier excreted in the culture supernatant of a marine bacterium, Myroides sp. strain SM1

A marine bacterium, Myroides sp. SM1, can grow on weathered crude oil and show emulsification of it. The biosurfactant able to emulsify crude oil was excreted in culture supernatant of Myroides sp. SM1 grown on marine broth, which was extracted with chloroform/methanol (1:1) at pH 7 and purified by normal and reverse phase silica gel column chromatographies. The compound was ninhydrin-positive, and the chemical structure was elucidated by nuclear magnetic resonance (NMR), infrared spectroscopy (IR), fast atom bombardment mass spectrometry, and gas chromatography–mass spectrometry (GC-MS) to be a mixture of l-ornithine lipids, which were composed of l-ornithine and a different couple of iso-3-hydroxyfatty acid (C₁₅–C₁₇) and iso-fatty acid (C₁₅ or C₁₆) in a ratio of 1:1:1. The critical micelle concentration for a mixture of ornithine lipids was measured to be approximately 40 mg/l. A mixture of ornithine lipids exhibited emulsifying activity for crude oil in a broad range of pH, temperature, and salinity and showed higher surface activity for oil displacement test than other several artificial surfactants and a biosurfactant, surfactin.     

An efficient biosurfactant-producing bacterium Selenomonas ruminantium CT2, isolated from mangrove sediment in south of Thailand

Biosurfactant-producing bacteria, isolate CT2, was isolated from mangrove sediment in the south of Thailand. The sequence of the 16S rRNA gene from isolate CT2 showed 100?% similarity with Selenomonas ruminantium. The highest biosurfactant production (5.02?g/l) was obtained when the cells were grown on minimal salt medium containing 15?g/l molasses and 1?g/l commercial monosodium glutamate supplemented with 1?g/l NaCl, 0.1?g/l leucine, 5?% (v/v) inoculum size at 30?°C and 150?rpm after 54?h of cultivation. The biosurfactant obtained by extraction with ethyl acetate showed high surface tension reduction (25.5?mN/m), a small CMC value (8?mg/l), thermal and pH stability with respect to surface tension reduction and emulsification activity and a high level of salt tolerance. The biosurfactant obtained was confirmed as a lipopeptide by using a biochemical test, FT-IR, MNR and mass spectrometry. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance PAHs solubility.     

产表面活性剂石油降解菌BS-5的特性研究

目的确定培养条件对产表面活性剂菌株BS-5的生长及降解特性的影响。方法利用紫外分光光度法、表面张力测定法和气相色谱-质谱联用仪(GC-MS),分别以菌体浓度、培养液表面张力及原油降解率为评价指标。结果菌体生长与产表面活性物质的能力及降解能力呈正相关,且确定最优碳源为0.5%的可溶性淀粉,氮源为1.0%的玉米浆,降解时间为6d,在此条件下原油降解率最高达42.3%。结论菌株培养条件的优化提高了菌株自身生长、产表面活性剂及降解原油的能力,为石油污染修复提供理论依据。     

A Comparative Study on Biosurfactant Activity of Crude Oil–Degrading Bacteria and Its Correlation to Total Petroleum Hydrocarbon Degradation

In this study, 11 bacteria isolated from Tapis crude oil–contaminated sites were identified by using biochemical tests and 16S rDNA gene sequencing. Their abilities to biodegrade Tapis crude oil was determined by gas chromatography before they were further screened for biosurfactant activity by employing qualitative (blood agar hemolysis, microplate assay, drop-collapse test), semiquantitative (emulsification formation), and quantitative (surface tension measurement) methods. Four isolates, namely, Acinetobacter baumanii UKMP-12T, Pseudomonas aeruginosa UKMP-14T, Rhodococcus sp. UKMP-5T, and Rhodococcus sp. UKMP-7T, exhibited high percentages in total petroleum hydrocarbon (TPH) degradation. A strong correlation between the emulsification index (E ₂₄) and surface tension measurement (r _s = +.866) as shown by Spearman rank correlation analysis suggested that these two methods were more reliable to predict biosurfactant activity. The TPH removal was also positively correlated to the ability of bacterial isolates to reduce the surface tension of growth medium, as revealed by Pearson correlation test (r_p = +.886). In conclusion, not all the biosurfactant detection protocols employed were effective. Nevertheless, the measurement of surface tension and E ₂₄ determination provided a rather rapid, easy, reproducible, and accurate result in identifying bacteria with biosurfactant-producing ability.     

Simultaneous hydrocarbon biodegradation and biosurfactant production by oilfield-selected bacteria

Aims: To study the bacterial diversity associated with hydrocarbon biodegradation potentiality and biosurfactant production of Tunisian oilfields bacteria. Methods and Results: Eight Tunisian hydrocarbonoclastic oilfields bacteria have been isolated and selected for further characterization studies. Phylogenetic analysis revealed that three thermophilic strains belonged to the genera Geobacillus, Bacillus and Brevibacillus, and that five mesophilic strains belonged to the genera Pseudomonas, Lysinibacillus, Achromobacter and Halomonas. The bacterial strains were cultivated on crude oil as sole carbon and energy sources, in the presence of different NaCl concentrations (1, 5 and 10%, w/v), and at 37 or 55°C. The hydrocarbon biodegradation potential of each strain was quantified by GC–MS. Strain C450R, phylogenetically related to the species Pseudomonas aeruginosa, showed the maximum crude oil degradation potentiality. During the growth of strain C450R on crude oil (2%, v/v), the emulsifying activity (E24) and glycoside content increased and reached values of 77 and 1·33 g l^?1, respectively. In addition, the surface tension (ST) decreased from 68 to 35·1 mN m^?1, suggesting the production of a rhamnolipid biosurfactant. Crude biosurfactant had been partially purified and characterized. It showed interest stability against temperature and salinity increasing and important emulsifying activity against oils and hydrocarbons. Conclusions: The results of this study showed the presence of diverse aerobic bacteria in Tunisian oilfields including mesophilic, thermophilic and halotolerant strains with interesting aliphatic hydrocarbon degradation potentiality, mainly for the most biosurfactant produced strains. Significance and Impact of the Study: It may be suggested that the bacterial isolates are suitable candidates for practical field application for effective in situ bioremediation of hydrocarbon‐contaminated sites.     

Isolation and functional characterization of a biosurfactant produced by a new and promising strain of Oleomonas sagaranensis AT18

Biosurfactant-producing bacteria were isolated from mangrove sediment in southern Thailand. Isolates were screened for biosurfactant production by using the surface tension test. The highest reduction of surface tension was achieved with a bacterial strain which was identified by 16S rRNA gene sequencing as Oleomonas sagaranensis AT18. It has also been investigated using different carbon and nitrogen sources. It showed that the strain was able to grow and reduce the surface tension of the culture supernatant to 25?mN/m. In all 5.30?g of biosurfactant yield was obtained after 54?h of cultivation by using molasses and NaNO(3) as carbon and nitrogen sources, respectively. The biosurfactant recovery by chloroform:methanol extraction showed a small critical micelle concentration value (8?mg/l), thermal and pH stability with respect to surface tension reduction. It also showed emulsification activity and a high level of salt concentration. The biosurfactant obtained was confirmed as a glycolipid by using a biochemical test, FT-IR and mass spectra. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance PAHs solubility.     

Crude biosurfactant from thermophilic Alcaligenes faecalis: Feasibility in petro-spill bioremediation

The thermophilic bacterium Alcaligenes faecalis isolated from the crude oil contaminated soil of Upper Assam, India. The isolated bacterium was first screened for the ability to produce biosurfactant. The strain growing at 42 °C could produce higher amount of biosurfactant in medium supplemented with 2% (v/v) diesel as sole source of carbon and energy. Biochemical characterizations including FT-IR and MS studies suggested the biosurfactant to be glycolipid. Tensiometric studies revealed that the biosurfactant produced by the bacterial strain could decrease the surface tension (??) at air-water interface from 71.6 to 32.3 mNm⁻¹ after 96 h of growth on hydrocarbon and possessed a low critical micelle concentration (CMC) value of approximately 38 mgl⁻¹, indicating high surface activity. The culture supernatant containing the biosurfactant was found to be functionally stable at varying pH (2-12), temperature (100 and 121 °C) and salinity (1-6% NaCl, w/v) conditions. Both the culture broth and the cell free supernatant exhibited high emulsifying activity against the different hydrocarbons and the crude oil components. The increase in cell surface hydrophobicity and glycolipid production by the strain suggested the existence of biosurfactant enhanced interfacial uptake of the hydrocarbons. Moreover, the partially purified biosurfactant exhibited antimicrobial activity by inhibiting the growth of several bacterial and fungal species. The strain represented a new class of biosurfactant producers and could be a potential candidate for the production of glycolipid biosurfactant which could be useful in a variety of biotechnological and industrial processes, particularly in the oil industry.     

Hydrocarbon Degradation and Biosurfactant Production by an Acenaphthene-degrading Pseudomonas Species

An acenaphthene-degrading bacterium putatively identified as Pseudomonas sp. strain KR3 and isolated from diesel-contaminated soil in Lagos, Nigeria was investigated for its degradative and biosurfactant production potentials on crude oil. Physicochemical analysis of the sampling site indicates gross pollution of the soil with high hydrocarbon content (2100 mg/kg) and detection of various heavy metals. The isolate grew luxuriantly on crude oil, engine oil and acenaphthene. It was resistant to septrin, amoxicillin and augmentin but was susceptible to pefloxacin, streptomycin and gentamycin. It was also resistant to elevated concentration of heavy metals such as 1–15 mM lead, nickel and molybdenum. On acenaphthene, the isolate exhibited specific growth rate and doubling time of 0.098 day^?1 and 3.06 days, respectively. It degraded 62.44% (31.2 mg/l) and 91.78% (45.89 mg/l) of 50 mg/l acenaphthene within 12 and 21 days. On crude oil, the specific growth rate and doubling time were 0.375 day^?1 and 1.85 days with corresponding percentage degradation of 33.01% (903.99 mg/l) and 87.79% (2403.71 mg/l) of crude oil (2738.16 mg/l) within 9 and 18 days. Gas chromatographic analysis of residual crude oil at the end of 18 days incubation showed significant reductions in the aliphatic, alicyclic and aromatic fractions with complete disappearance of benzene, propylbenzene, pristane, phytane, and nC₁₈-octadecane fractions of the crude oil. The isolate produced growth-associated biosurfactant on crude oil with the highest emulsification index (E₂₄) value of 72% ± 0.23 on Day 10 of incubation. The partially purified biosurfactant showed zero tolerance for salinity and had its optimal activity at 27°C and pH 2.0.     

一株石油烃降解菌的细胞疏水性及其乳化性质

【目的】从新疆油田石油污染土壤中分离到一株在25 °C条件下利用烃类产生生物表面活性剂的菌株红球菌(Rhodococcus sp.) HL-6, 对其菌体细胞疏水性及所产表面活性剂进行研究。【方法】通过细胞粘附性、表面张力及乳化活性测定对菌株所产表面活性剂进行性质研究。【结果】菌株HL-6在亲水性和疏水性基质中均能产生生物表面活性剂, 在疏水性基质中可以将培养液表面张力由初始的62.487 mN/m降到30.667 mN/m, 培养液在pH 6?9及NaCl浓度1%?5%范围内乳化效果良好, 在4 °C到55 °C范围内乳化效果均为100%, 菌株对柴油的耐受能力很高, 在30%柴油浓度下依然生长良好并且有44%的乳化活性。【结论】HL-6菌株的细胞表面具有很强的疏水性, 这有助于菌体细胞对烃类的摄取。该菌株能够利用烃类基质生产生物表面活性剂, 可以明显降低培养液表面张力并且对石油烃具有良好的乳化作用。说明菌株HL-6能够适应海洋滩涂石油污染的环境, 并可用于严重石油污染区域的生物修复。     

Isolation and characterization of Halomonas sp. strain C2SS100, a hydrocarbon-degrading bacterium under hypersaline conditions

Aims:  To isolate and characterize an efficient hydrocarbon-degrading bacterium under hypersaline conditions, from a Tunisian off-shore oil field.
Methods and Results:  Production water collected from 'Sercina' petroleum reservoir, located near the Kerkennah island, Tunisia, was used for the screening of halotolerant or halophilic bacteria able to degrade crude oil. Bacterial strain C2SS100 was isolated after enrichment on crude oil, in the presence of 100 g l⁻¹ NaCl and at 37°C. This strain was aerobic, Gram-negative, rod-shaped, motile, oxidase + and catalase +. Phenotypic characters and phylogenetic analysis based on the 16S rRNA gene of the isolate C2SS100 showed that it was related to members of the Halomonas genus. The degradation of several compounds present in crude oil was confirmed by GC–MS analysis. The use of refined petroleum products such as diesel fuel and lubricating oil as sole carbon source, under the same conditions of temperature and salinity, showed that significant amounts of these heterogenic compounds could be degraded. Strain C2SS100 was able to degrade hexadecane (C₁₆). During growth on hexadecane, cells surface hydrophobicity and emulsifying activity increased indicating the production of biosurfactant by strain C2SS100.
Conclusions:  A halotolerant bacterial strain Halomonas sp. C2SS100 was isolated from production water of an oil field, after enrichment on crude oil. This strain is able to degrade hydrocarbons efficiently. The mode of hydrocarbon uptake is realized by the production of a biosurfactant which enhances the solubility of hydrocarbons and renders them more accessible for biodegradation.
Significance and Impact of the Study:  The biodegradation potential of the Halomonas sp. strain C2SS100 gives it an advantage for possibly application on bioremediation of water, hydrocarbon-contaminated sites under high-salinity level.     

Biodegradation of crude oil by soil microorganisms in the tropic

Five microorganisms, three bacteria and two yeasts, capable of degrading Tapis light crude oil were isolated from oil-contaminated soil in Bangkok, Thailand. Soil enrichment culture was done by inoculating the soil in mineral salt medium with 0.5% v/v Tapis crude oil as the sole carbon source. Crude oil biodegradation was measured by gas chromatography method. Five strains of pure microorganisms with petroleum degrading ability were isolated: three were bacteria and the other two were yeasts. Candida tropicalis strains 7Y and 15Y were identified as efficient oil degraders. Strain 15Y was more efficient, it was able to reduce 87.3% of the total petroleum or 99.6% of n-alkanes within the 7-day incubation period at room temperature of 25 ± 2 °C.     

Biosurfactant Production by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> SNP0614 and its Effect on Biodegradation of Petroleum

An efficient biosurfactant-producing strain was isolated and cultured from Dagang oil field (China) using crude oil as sole source of carbon. Based on partial sequenced 16S rDNA analysis, the isolated strain was identified as Pseudomonas aeruginosa SNP0614. The bacterium P. aeruginosa SNP0614 produced a type of biosurfactant with excessive foam-forming properties. After microbial cultivation at 37°C and 150 rpm for 12 h, the produced biosurfactant was found to reduce the surface tension to 25.4 mN/m with critical micelle concentration (CMC) of 45.0 mg/L. After 20 days of incubation, the biosurfactant exhibited 90% emulsification activity (E₂₄) on crude oil. FTIR spectroscopy of extracted biosurfactant indicated the biosurfactant as lipopeptide. The significant synergistic effect between P. aeruginosa SNP0614 and the mixed oildegrading bacteria resulted in increasing n-alkanes degradation rate by 30%. The strain P. aeruginosa SNP0614 represented as a promising biosurfactant producer and could be applied in a variety of biotechnological and industrial processes, particularly in microbial enhanced oil recovery and the bioremediation of oil pollution.     

Isolation and characterization of a biosurfactant‐producing Fusarium sp. BS‐8 from oil contaminated soil

This study reports characterization of a biosurfactant‐producing fungal isolate from oil contaminated soil of Missa Keswal oil field, Pakistan. It was identified as Fusarium sp. BS‐8 on the basis of macroscopic and microscopic morphology, and 18S rDNA gene sequence homology. The biosurfactant‐producing capability of the fungal isolates was screened using oil displacement activity, emulsification index assay, and surface tension (SFT) measurement. The optimization of operational parameters and culture conditions resulted in maximum biosurfactant production using 9% (v/v) inoculum at 30°C, pH 7.0, using sucrose and yeast extract, as carbon and nitrogen sources, respectively. A C:N ratio of 0.9:0.1 (w/w) was found to be optimum for growth and biosurfactant production. At optimal conditions, it attained lowest SFT (i.e., 32 mN m^?1) with a critical micelle concentration of ≥ 1.2 mg mL^?1. During 5 L shake flask fermentation experiments, the biosurfactant productivity was 1.21 g L^?1 pure biosurfactant having significant emulsifying index (E₂₄, 70%) and oil‐displacing activity (16 mm). Thin layer chromatography and Fourier transform infrared spectrometric analyses indicated a lipopeptide type of the biosurfactant. The Fusarium sp. BS‐8 has substantial potential of biosurfactant production, yet it needs to be fully characterized with possibility of relatively new class of biosurfactants. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1065–1075, 2014     

Optimization,production and characterization of glycolipid biosurfactant from the marine actinobacterium,Streptomyces sp. MAB36

A potential glycolipid biosurfactant producer Streptomyces sp. MAB36 was isolated from marine sediment samples. Medium composition and culture conditions for the glycolipid biosurfactant production by Streptomyces sp. MAB36 were optimized, using two statistical methods: Plackett–Burman design was applied to find out the key ingredients and conditions for the best yield of glycolipid biosurfactant production and central composite design was used to optimize the concentration of the four significant variables, starch, casein, crude oil and incubation time. Fructose and yeast extract were the best carbon and nitrogen sources for the production of the glycolipid biosurfactant. Biochemical characterizations including FTIR and MS studies suggested the glycolipid nature of the biosurfactant. The isolated glycolipid biosurfactant reduced the surface tension of water from 73.2 to 32.4 mN/m. The purified glycolipid biosurfactant showed critical micelle concentrations of 36 mg/l. The glycolipid biosurfactant was effective at very low concentrations over a wide range of temperature, pH, and NaCl concentration. The purified glycolipid biosurfactant showed strong antimicrobial activity. Thus, the strain Streptomyces sp. MAB36 has proved to be a potential source of glycolipid biosurfactant that could be used for the bioremediation processes in the marine environment.     

Biosurfactant synthesis by Pseudomonas aeruginosa LBI isolated from a hydrocarbon-contaminated site

Aims: Pseudomonas aeruginosa LBI (Industrial Biotechnology Laboratory) was isolated from hydrocarbon-contaminated soil as a potential producer of biosurfactant and evaluated for hydrocarbon biodegradation. The emulsifying power and stability of the product was assessed in the laboratory, simulating water contamination with benzene, toluene, kerosene, diesel oil and crude oil at various concentrations. Methods and Results: Bacteria were grown at 30°C and shaken at 200 rpm for 168 h, with three repetitions. Surface tension, pH and biosurfactant stability were observed in the cell-free broth after 168 h of incubation. The strain was able to produce biosurfactant and grow in all the carbon sources under study, except benzene and toluene. When cultivated in 30% (w/v) diesel oil, the strain produced the highest quantities (9·9 g l⁻¹) of biosurfactant. The biosurfactant was capable of emulsifying all the hydrocarbons tested. Conclusion: The results from the present study demonstrate that Ps. aeruginosa LBI can grow in diesel oil, kerosene, crude oil and oil sludge and the biosurfactant produced has potential applications in the bioremediation of hydrocarbon-contaminated sites. Significance and Impact of the Study: Pseudomonas aeruginosa LBI or the biosurfactant it produces can be used in the bioremediation of environmental pollution induced by industrial discharge or accidental hydrocarbon spills.