Cytarabine-induced destabilization of a model Okazaki fragment.

Cytarabine is a potent anticancer drug that interferes with elongation of the lagging strand at the replication fork during DNA synthesis. The effects of cytarabine substitution on the structural and thermodynamic properties of a model Okazaki fragment were investigated using UV hyperchromicity and 1H NMR spectroscopy to determine how cytarabine alters the physicochemical properties of Okazaki fragments that are intermediates during DNA replication. Two model Okazaki fragments were prepared corresponding to a primary initiation site for DNA replication in the SV40 viral genome. One model Okazaki fragment consisted of five ribo- and seven deoxyribonucleotides on the hybrid strand, together with its complementary (DNA) strand. The second model Okazaki fragment was identical to the first with the exception of cytarabine substitution for deoxycytidine at the third DNA nucleotide of the hybrid strand. Thermodynamic parameters for the duplex to single strand transition for each model Okazaki fragment were calculated from the concentration dependence of the T m at 260 nm. Cytarabine significantly decreased the stability of this model Okazaki fragment, decreasing the melting temperature from 46.8 to 42.4 degrees C at a concentration of 1.33 x 10(-5) M. The free energy for the duplex to single strand transition was 1.2 kcal/mol less favorable for the cytarabine-substituted Okazaki fragment relative to the control at 37 degrees C. Analysis of the temperature dependence of the imino1H resonances for the two duplexes demonstrated that cytarabine specifically destabilized the DNA:DNA duplex portion of the model Okazaki fragment. These results are consistent with inhibition of lagging strand DNA synthesis by cytarabine substitution resulting from destabilization of the DNA:DNA duplex portion of Okazaki fragments in vivo .     

Two-dimensional gel analysis of rolling circle replication in the presence and absence of bacteriophage T4 primase.

The rolling circle DNA replication structures generated by the in vitro phage T4 replication system were analyzed using two-dimensional agarose gels. Replication structures were generated in the presence or absence of T4 primase (gp61), permitting the analysis of replication forks with either duplex or single-stranded tails. A characteristic arc shape was visualized when forks with single-stranded tails were cleaved by a restriction enzyme with the help of an oligonucleotide that anneals to restriction sites in the single-stranded tail. After calibrating the gel system with this well-studied rolling circle replication reaction, we then analyzed the in vivo replication directed by a T4 replication origin cloned within a plasmid. DNA samples were generated from infections with either wild-type or primase-deletion mutant phage. The only replicative arc that could be detected in the wild-type sample corresponded to duplex Y forms, consistent with very efficient lagging strand synthesis. Surprisingly, we obtained evidence for both duplex and single-stranded DNA tails in the samples from the primase-deficient infection. We conclude that a relatively inefficient mechanism primes lagging strand DNA synthesis in vivo when gp61 is absent.     

Lagging strand synthesis in coordinated DNA synthesis by bacteriophage t7 replication proteins

The proteins of bacteriophage T7 DNA replication mediate coordinated leading and lagging strand synthesis on a minicircle template. A distinguishing feature of the coordinated synthesis is the presence of a replication loop containing double and single-stranded DNA with a combined average length of 2600 nucleotides. Lagging strands consist of multiple Okazaki fragments, with an average length of 3000 nucleotides, suggesting that the replication loop dictates the frequency of initiation of Okazaki fragments. The size of Okazaki fragments is not affected by varying the components (T7 DNA polymerase, gene 4 helicase-primase, gene 2.5 single-stranded DNA binding protein, and rNTPs) of the reaction over a relatively wide range. Changes in the size of Okazaki fragments occurs only when leading and lagging strand synthesis is no longer coordinated. The synthesis of each Okazaki fragment is initiated by the synthesis of an RNA primer by the gene 4 primase at specific recognition sites. In the absence of a primase recognition site on the minicircle template no lagging strand synthesis occurs. The size of the Okazaki fragments is not affected by the number of recognition sites on the template.     

The control mechanism for lagging strand polymerase recycling during bacteriophage T4 DNA replication

Given the polarity of DNA duplex, replication by the leading strand polymerase is continuous whereas that by the lagging strand polymerase is discontinuous proceeding through Okazaki fragments. Yet the respective polymerases act processively, implying that the recycling of the lagging strand polymerase is a controlled process. We demonstrate that the rate of the lagging strand polymerase relative to that of fork movement affects Okazaki fragment size and generates ssDNA gaps. We show by using a substrate with limited priming sites that Okazaki fragments can be shifted to shorter lengths by varying the rate of the primase. We find that clamp and clamp loader levels affect both primer utilization and Okazaki fragment size, possibly implicating clamp loading onto the RNA primer in the mechanism of lagging strand polymerase recycling. We formulate a signaling model capable of rationalizing the distribution of Okazaki fragments under various conditions for this and possibly other replisomes.     

Two distinct triggers for cycling of the lagging strand polymerase at the replication fork

There are two modes of DNA synthesis at a replication fork. The leading strand is synthesized in a continuous fashion in lengths that in Escherichia coli can be in excess of 2 megabases. On the other hand, the lagging strand is synthesized in relatively short stretches of 2 kilobases. Nevertheless, identical assemblies of the DNA polymerase III core tethered to the beta sliding clamp account for both modes of DNA synthesis. Yet the same lagging strand polymerase accounts for the synthesis of all Okazaki fragments at a replication fork, cycling repeatedly every 1 or 2 s from the 3'-end of the just-completed fragment to the 3'-end of the new primer. Several models have been invoked to account for the rapid cycling of a polymerase complex that can remain bound to the template for upward of 40 min. By using isolated replication protein-DNA template complexes, we have tested these models and show here that cycling of the lagging strand polymerase can be triggered by either the action of primase binding to the replisome and synthesizing a primer or by collision of the lagging strand polymerase with the 5'-end of the previous Okazaki fragment.     

Coordinated leading- and lagging-strand synthesis at the Escherichia coli DNA replication fork. V. Primase action regulates the cycle of Okazaki fragment synthesis.

Replication forks formed during rolling-circle DNA synthesis supported by a tailed form II DNA substrate in the presence of the primosome, the single-stranded DNA binding protein, and the DNA polymerase III holoenzyme (Pol III HE) that had been reconstituted from the purified subunits, beta, tau, and the gamma.delta complex, at limiting (with respect to nucleotide incorporation) concentrations of the Pol III core (alpha, epsilon, and theta) produced aberrantly small Okazaki fragments, while the synthesis of the leading strand was unperturbed. These small Okazaki fragments were not arrayed in tandem along the lagging-strand DNA template, but were separated by large gaps. Similarly structured synthetic products were not manufactured by replication forks reconstituted with higher, saturating concentrations of the Pol III core. Replication forks producing these small fragments could respond, by modulating the size of the Okazaki fragments produced, to variations in the concentration of NTPs or the primase, conditions that affect the frequency of priming on the lagging strand, but not to variation in the concentration of dNTPs, conditions that affect the frequency of utilization of the primers. Significantly longer Okazaki fragments (greater than 7 kilobases) could be produced in the presence of a limiting amount of Pol III core at low concentrations of the primase. These observations indicated that the production of small Okazaki fragments was not a result of a debilitated lagging-strand Pol III core, but rather a function of the time available for nascent strand synthesis during the cycle of events that are required for the manufacture of an Okazaki fragment and that it was the association of primase with the replication fork that keyed this cycle.     

The crystal structure of the bifunctional primase-helicase of bacteriophage T7

Within minutes after infecting Escherichia coli, bacteriophage T7 synthesizes many copies of its genomic DNA. The lynchpin of the T7 replication system is a bifunctional primase-helicase that unwinds duplex DNA at the replication fork while initiating the synthesis of Okazaki fragments on the lagging strand. We have determined a 3.45 A crystal structure of the T7 primase-helicase that shows an articulated arrangement of the primase and helicase sites. The crystallized primase-helicase is a heptamer with a crown-like shape, reflecting an intimate packing of helicase domains into a ring that is topped with loosely arrayed primase domains. This heptameric isoform can accommodate double-stranded DNA in its central channel, which nicely explains its recently described DNA remodeling activity. The double-jointed structure of the primase-helicase permits a free range of motion for the primase and helicase domains that suggests how the continuous unwinding of DNA at the replication fork can be periodically coupled to Okazaki fragment synthesis.     

Analysis of the Okazaki fragment distributions along single long DNAs replicated by the bacteriophage T4 proteins

Rolling circle replication from M13 DNA circles was previously reconstituted in vitro using purified factors encoded by bacteriophage T4. The products are duplex circles with linear tails >100 kb. When T4 DNA polymerase deficient in 3' to 5' exonuclease activity was employed, electron microscopy revealed short single-stranded DNA "flaps" along the replicated tails. This marked the beginning of each Okazaki fragment, allowing an analysis of the lengths of sequential Okazaki fragments on individual replicating molecules. DNAs containing runs of Okazaki fragments of similar length were found, but most showed large length variations over runs of six or more fragments reflecting the broad population distribution.     

DNA Replication Catalyzed by Herpes Simplex Virus Type 1 Proteins Reveals Trombone Loops at the Fork

Using purified replication factors encoded by herpes simplex virus type 1 and a 70-base minicircle template, we obtained robust DNA synthesis with leading strand products of >20,000 nucleotides and lagging strand fragments from 600 to 9,000 nucleotides as seen by alkaline gel electrophoresis. ICP8 was crucial for the synthesis on both strands. Visualization of the deproteinized products using electron microscopy revealed long, linear dsDNAs, and in 87%, one end, presumably the end with the 70-base circle, was single-stranded. The remaining 13% had multiple single-stranded segments separated by dsDNA segments 500 to 1,000 nucleotides in length located at one end. These features are diagnostic of the trombone mechanism of replication. Indeed, when the products were examined with the replication proteins bound, a dsDNA loop was frequently associated with the replication complex located at one end of the replicated DNA. Furthermore, the frequency of loops correlated with the fraction of DNA undergoing Okazaki fragment synthesis.     

Identification of Subunit Binding Positions on a Model Fork and Displacements That Occur during Sequential Assembly of the Escherichia coli Primosome

When replication stalls and forks disassemble, the restart primosome is required to reload the replicative helicase so that chromosomal replication can be reinitiated. We have taken a photo-cross-linking approach, using model replication forks containing a phenyl diazirine placed at single locations, to determine the positions of primosomal protein binding and changes in interactions that occur during the assembly reaction. This approach revealed a novel mode for single-stranded DNA-binding protein (SSB)-DNA binding, in which SSB interacts with both the leading and lagging single-strand segments and the parental duplex of the fork. Cross-linking to a novel region within SSB is observed only when it is bound to forked structures. This binding mode is also followed by PriB. PriA binds to the fork, excluding SSB and PriB, interacting with the primer terminus, single-stranded leading and lagging strands and duplex in immediate proximity of the fork. SSB binds to flanking single-stranded segments distal to the fork in the presence of PriA. The addition of PriB or DnaT to a PriA-SSB-fork complex does not lead to cross-linking or displacement, suggesting that their association is through protein-protein interactions at early stages of the reaction. Upon addition of DnaC and the DnaB helicase in the presence of ATPγS, helicase is assembled, leading to contacts within the duplex region on the tracking (lagging) strand and strong contacts with the displaced leading single strand near the fork. PriA is displaced from DNA upon helicase assembly.     

The rolling circle . capsid complex as an intermediate in phi X DNA replication and viral assembly

Late in the life cycle of the single-stranded DNA phage phi X, the synthesis of positive strand DNA is coupled to the maturation of progeny virions. DNA synthesis and packaging take place in a replication-assembly complex, which we have purified to homogeneity and characterized. The following conclusions can be drawn: 1. The DNA component of the replication-assembly complex is a rolling circle with a single-stranded DNA tail which is less than or equal to genome length. 2. The major protein component of the replication-assembly complex is an intact viral capsid, as shown by gel analysis of 35S-labeled complexes. As replication proceeds at the DNA growing point, the positive strand tail of the rolling circle is displaced directly into the capsid. In addition to the capsid, the complex contains at least 1 molecule of the phi X gene A nicking protein, which appears to be covalently linked to the DNA. 3. The rolling circle . capsid complex can be purified to homogeneity by taking advantage of its uniform sedimentation velocity (35 S) and its uniform density upon equilibrium centrifugation in CsCl (1.50 g/cc). 4. The replication-assembly complex can be visualized in the electron microscope. An electron-dense particle, which has the dimensions of a viral capsid, is observed attached to a rolling circle at the DNA growing point. 5. Hybridization of specific phi X restriction fragments to the deproteinized, single-stranded tails of intact rolling circles has allowed the use of these replicating intermediates to determine both the origin/terminus and the direction of phi X positive strand DNA synthesis. The ends of the rolling circle tails map in the Hae III restriction Fragment Z6b, at the position on the phi X genome at which the gene A endonuclease is known to cut. This result indicates that this endonuclease participates in the "termination" of each round of synthesis by cutting off unit-length viral genomes. 6. Rolling circle . capsid complexes were also isolated from two other icosahedral, single-stranded DNA phages: G4 and St-1. The rolling circle . capsid complex seen in the case of the single-stranded DNA phages represents the first example of a structure in which DNA synthesis and viral assembly occur in a coupled manner. This tight coordination explains why double-stranded DNA circles are the net product of synthesis early in the viral life cycle while only single-stranded DNA circles are produced later. The single-stranded tails of the rolling circle intermediates are available for conversion to the duplex state at early times, whereas the concentration of preformed capsids later is high enough to bind to all of the replicating molecules and package the emerging positive strand DNA.     

Biochemical characterization of the DNA substrate specificity of Werner syndrome helicase

Werner syndrome is a hereditary premature aging disorder characterized by genome instability. The product of the gene defective in WS, WRN, is a helicase/exonuclease that presumably functions in DNA metabolism. To understand the DNA structures WRN acts upon in vivo, we examined its substrate preferences for unwinding. WRN unwound a 3'-single-stranded (ss)DNA-tailed duplex substrate with streptavidin bound to the end of the 3'-ssDNA tail, suggesting that WRN does not require a free DNA end to unwind the duplex; however, WRN was completely blocked by streptavidin bound to the 3'-ssDNA tail 6 nucleotides upstream of the single-stranded/double-stranded DNA junction. WRN efficiently unwound the forked duplex with streptavidin bound just upstream of the junction, suggesting that WRN recognizes elements of the fork structure to initiate unwinding. WRN unwound two important intermediates of replication/repair, a 5'-ssDNA flap substrate and a synthetic replication fork. WRN was able to translocate on the lagging strand of the synthetic replication fork to unwind duplex ahead of the fork. For the 5'-flap structure, WRN specifically displaced the 5'-flap oligonucleotide, suggesting a role of WRN in Okazaki fragment processing. The ability of WRN to target DNA replication/repair intermediates may be relevant to its role in genome stability maintenance.     

The Escherichia coli dnaB replication protein is a DNA helicase

Genetic and biochemical analyses indicate that the Escherichia coli dnaB replication protein functions in the propagation of replication forks in the bacterial chromosome. We have found that the dnaB protein is a DNA helicase that is capable of unwinding extensive stretches of double-stranded DNA. We constructed a partially duplex DNA substrate, containing two preformed forks of single-stranded DNA, which was used to characterize this helicase activity. The dnaB helicase depends on the presence of a hydrolyzable ribonucleoside triphosphate, is maximally stimulated by a combination of E. coli single-stranded DNA-binding protein and E. coli primase, is inhibited by antibody directed against dnaB protein, and is inhibited by prior coating of the single-stranded regions of the helicase substrate with the E. coli single-stranded DNA-binding protein. It was determined that the dnaB protein moves 5' to 3' along single-stranded DNA, apparently in a processive fashion. To invade the duplex portion of the helicase substrate, the dnaB protein requires a 3'-terminal extension of single-stranded DNA in the strand to which it is not bound. Under optimal conditions at 30 degrees C, greater than 1 kilobase pair of duplex DNA can be unwound within 30 s. Based on these findings and other available data, we propose that the dnaB protein is the primary replicative helicase of E. coli and that it actively and processively migrates along the lagging strand template, serving both to unwind the DNA duplex in advance of the leading strand and to potentiate synthesis by the bacterial primase of RNA primers for the nascent (Okazaki) fragments of the lagging strand.     

Bacteriophage P2 DNA replication. Characterization of the requirement of the gene B protein in vivo

Replicative intermediates isolated from Escherichia coli cells infected with P2 gene B mutants were circular DNA molecules with single-stranded DNA tails, as opposed to the double-stranded DNA tails of wild-type replicative intermediates. The results show that the mutant replicative intermediates arose from aberrant DNA replication, aberrant due to a lack of lagging strand DNA synthesis, but with normal leading strand synthesis, so that only one circular duplex daughter DNA molecule was made from each duplex parent molecule. The single-stranded tails were shown to correspond to the nicked (and therefore displaced) parental DNA "l" strands. By partial denaturation mapping, the ends of the single-stranded tails tended to map close to the replication origin, but not all at a unique position, probably due to partial degradation or breakage in vivo, or during cell lysis or DNA isolation. By hybridization to separated strands of P2 DNA on nitrocellulose filters, DNA synthesis was shown to be asymmetric, and consistent with more leading strand than lagging strand synthesis having occurred. We concluded that the gene B protein is required for lagging strand DNA synthesis, but not for initiation, elongation or termination of the leading strand.     

RNA primer handoff in bacteriophage T4 DNA replication: the role of single-stranded DNA-binding protein and polymerase accessory proteins

In T4 phage, coordinated leading and lagging strand DNA synthesis is carried out by an eight-protein complex termed the replisome. The control of lagging strand DNA synthesis depends on a highly dynamic replisome with several proteins entering and leaving during DNA replication. Here we examine the role of single-stranded binding protein (gp32) in the repetitive cycles of lagging strand synthesis. Removal of the protein-interacting domain of gp32 results in a reduction in the number of primers synthesized and in the efficiency of primer transfer to the polymerase. We find that the primase protein is moderately processive, and this processivity depends on the presence of full-length gp32 at the replication fork. Surprisingly, we find that an increase in the efficiency of primer transfer to the clamp protein correlates with a decrease in the dissociation rate of the primase from the replisome. These findings result in a revised model of lagging strand DNA synthesis where the primase remains as part of the replisome after each successful cycle of Okazaki fragment synthesis. A delay in primer transfer results in an increased probability of the primase dissociating from the replication fork. The interplay between gp32, primase, clamp, and clamp loader dictates the rate and efficiency of primer synthesis, polymerase recycling, and primer transfer to the polymerase.     

Prokaryotic DNA replication mechanisms

The three different prokaryotic replication systems that have been most extensively studied use the same basic components for moving a DNA replication fork, even though the individual proteins are different and lack extensive amino acid sequence homology. In the T4 bacteriophage system, the components of the DNA replication complex can be grouped into functional classes as follows: DNA polymerase (gene 43 protein), helix-destabilizing protein (gene 32 protein), polymerase accessory proteins (gene 44/62 and 45 proteins), and primosome proteins (gene 41 DNA helicase and gene 61 RNA primase). DNA synthesis in the in vitro system starts by covalent addition onto the 3'OH end at a random nick on a double-stranded DNA template and proceeds to generate a replication fork that moves at about the in vivo rate, and with approximately the in vivo base-pairing fidelity. DNA is synthesized at the fork in a continuous fashion on the leading strand and in a discontinuous fashion on the lagging strand (generating short Okazaki fragments with 5'-linked pppApCpXpYpZ pentaribonucleotide primers). Kinetic studies reveal that the DNA polymerase molecule on the lagging strand stays associated with the fork as it moves. Therefore the DNA template on the lagging strand must be folded so that the stop site for the synthesis of one Okazaki fragment is adjacent to the start site for the next such fragment, allowing the polymerase and other replication proteins on the lagging strand to recycle.     

The application of a minicircle substrate in the study of the coordinated T4 DNA replication

A reconstituted in vitro bacteriophage T4 DNA replication system was studied on a synthetic 70-mer minicircle substrate. This substrate was designed so that dGMP and dCMP were exclusively incorporated into the leading and the lagging strand, respectively. This design allows the simultaneous and independent measurement of the leading and lagging strand synthesis. In this paper, we report our results on the characterization of the 70-mer minicircle substrate. We show here that the minicircle substrate supports coordinated leading and lagging strand synthesis under the experimental conditions employed. The rate of the leading strand fork movement was at an average of approximately 150 nucleotides/s. This rate decreased to less than 30 nucleotides/s when the helicase was omitted from the reaction. These results suggest that both the holoenzyme and the primosome can be simultaneously assembled onto the minicircle substrate. The lagging strand synthesized on this substrate is of an average of 1.5 kb, and the length of the Okazaki fragments increased with decreasing [rNTPs]. The proper response of the Okazaki fragment size toward the change of the priming signal further indicates a functional replisome assembled on the minicircle template. The effects of various protein components on the leading and lagging strand synthesis were also studied. The collective results indicate that coordinated strand synthesis only takes place within certain protein concentration ranges. The optimal protein levels of the proteins that constitute the T4 replisome generally bracket the concentrations of the same proteins in vivo. Omission of the primase has little effect on the rate of dNMP incorporation or the rate of the fork movement on the leading strand within the first 30 s of the reaction. This inhibition only becomes significant at later times of the reaction and may be associated with the accumulation of single-stranded DNA leading to the collapse of active replisomes.     

NAR Breakthrough Article: Cycling of the E. coli lagging strand polymerase is triggered exclusively by the availability of a new primer at the replication fork

Two models have been proposed for triggering release of the lagging strand polymerase at the replication fork, enabling cycling to the primer for the next Okazaki fragment—either collision with the 5′-end of the preceding fragment (collision model) or synthesis of a new primer by primase (signaling model). Specific perturbation of lagging strand elongation on minicircles with a highly asymmetric G:C distribution with ddGTP or dGDPNP yielded results that confirmed the signaling model and ruled out the collision model. We demonstrated that the presence of a primer, not primase per se, provides the signal that triggers cycling. Lagging strand synthesis proceeds much faster than leading strand synthesis, explaining why gaps between Okazaki fragments are not found under physiological conditions.     

Timing, Coordination, and Rhythm: Acrobatics at the DNA Replication Fork

In DNA replication, the antiparallel nature of the parental duplex imposes certain constraints on the activity of the DNA polymerases that synthesize new DNA. The leading-strand polymerase advances in a continuous fashion, but the lagging-strand polymerase is forced to restart at short intervals. In several prokaryotic systems studied so far, this problem is solved by the formation of a loop in the lagging strand of the replication fork to reorient the lagging-strand DNA polymerase so that it advances in parallel with the leading-strand polymerase. The replication loop grows and shrinks during each cycle of Okazaki fragment synthesis. The timing of Okazaki fragment synthesis and loop formation is determined by a subtle interplay of enzymatic activities at the fork. Recent developments in single-molecule techniques have enabled the direct observation of these processes and have greatly contributed to a better understanding of the dynamic nature of the replication fork. Here, we will review recent experimental advances, present the current models, and discuss some of the exciting developments in the field.     

Replication of the lagging strand: a concert of at least 23 polypeptides.

DNA replication is one of the most important events in living cells, and it is still a key problem how the DNA replication machinery works in its details. A replication fork has to be a very dynamic apparatus since frequent DNA polymerase switches from the initiating DNA polymerase alpha to the processive elongating DNA polymerase delta occur at the leading strand (about 8 x 10(4) fold on both strands in one replication round) as well as at the lagging strand (about 2 x 10(7) fold on both strands in one replication round) in mammalian cells. Lagging strand replication involves a very complex set of interacting proteins that are able to frequently initiate, elongate and process Okazaki fragments of 180 bp. Moreover, key proteins of this important process appear to be controlled by S-phase check-point proteins. It became furthermore clear in the last few years that DNA replication cannot be considered uncoupled from DNA repair, another very important event for any living organism. The reconstitution of nucleotide excision repair and base excision repair in vitro with purified components clearly showed that the DNA synthesis machinery of both of these macromolecular events are similar and do share many components of the lagging strand DNA synthesis machinery. In this minireview we summarize our current knowledge of the components involved in the execution and regulation of DNA replication at the lagging strand of the replication fork.