Basis for changes in DNA recognition by the EcoR124 and EcoR124/3 type I DNA restriction and modification enzymes

EcoR124 and EcoR124/3 are type I DNA restriction and modification systems. The EcoR124/3 system arose from the EcoR124 system some 15 years ago and at the electron microscopic DNA heteroduplex level the genes for both systems are still apparently identical. We have shown that the DNA sequences recognized by the two systems are GAA(N6)RTCG for EcoR124 and GAA(N7)RTCG for EcoR124/3. The sequences thus differ only in the length of the non-specific spacer. This difference nevertheless places the two specific domains of the EcoR124/3 recognition sequence 0.34 nm further apart and rotates them 36 degrees with respect to those of EcoR124, which implies major structural differences in the proteins recognizing these sequences. We have now determined the nucleotide sequences of the hsdS and hsdM genes of both systems and of the hsdR gene of EcoR124/3. The hsdS gene products provide DNA sequence specificity in both restriction and modification, the hsdM gene products are necessary for modification and all three hsd gene products are required for restriction. The only difference that we have detected between the two systems is that a 12 base-pair sequence towards the middle of the hsdS gene is repeated twice in the EcoR124 gene and three times in the EcoR124/3 gene. We have deleted one of the repeats in the EcoR124/3 gene and shown that this changes the specificity to that of EcoR124. Thus, the extra four amino acids in the middle of the EcoR124/3 hsdS gene product, which in an alpha-helical configuration would extend 0.6 nm, are sufficient to explain the differences in sequence recognition. We suggest that the EcoR124/3 system was generated by an unequal crossing over and argue that this kind of specificity change should not be rare in Nature.     

The EcoDXX1 restriction and modification system: cloning the genes and homology to type I restriction and modification systems

The Escherichia coli plasmid pDXX1 codes for a type I restriction and modification system, EcoDXX1. A 15.5-kb BamHI fragment from pDXX1 has been cloned and contains the hsdR, hsdM, and hsdS genes that encode the EcoDXX1 system. The EcoDXX1 hsd genes can complement the gene products of the EcoR124 and EcoR124/3 hsd systems, but not those of EcoK and EcoB. Hybridization experiments using EcoDXX1 hsd genes as a probe demonstrate homology between EcoDXX1 and EcoR124 and EcoR124/3 restriction-modification systems, but weak or no homology between EcoDXX1 and EcoK or EcoB systems.     

Analysis of type I restriction modification systems in the Neisseriaceae: genetic organization and properties of the gene products

The hsd locus (host specificity of DNA) was identified in the Neisseria gonorrhoeae genome. The DNA fragment encoding this locus produced an active restriction and modification (R/M) system when cloned into Escherichia coli. This R/M system was designated NgoAV. The cloned genomic fragment (7800 bp) has the potential to encode seven open reading frames (ORFs). Several of these ORFs had significant homology with other proteins found in the databases: ORF1, the hsdM, a methylase subunit (HsdM); ORF2, a homologue of dinD; ORF3, a homologue of hsdS; ORF4, a homologue of hsdS; and ORF5, an endonuclease subunit hsdR. The endonuclease and methylase subunits possessed strongest protein sequence homology to the EcoR124II R/M system, indicating that NgoAV belongs to the type IC R/M family. Deletion analysis showed that only ORF3 imparted the sequence specificity of the RM.NgoAV system, which recognizes an interrupted palindrome sequence (GCAN(8-)TGC). The genetic structure of ORF3 (208 amino acids) is almost identical to the structure of the 5' truncated hsdS genes of EcoDXXI or EcoR124II R/M systems obtained by in vitro manipulation. Genomic sequence analysis allowed us to identify hsd loci with a very high homology to RM.NgoAV in two strains of Neisseria meningitidis. However, significant differences in the organization and structure of the hsdS genes in both these systems suggests that, if functional, they would possess recognition sites that differ from the gonococcus and from themselves.     

EcoA and EcoE: alternatives to the EcoK family of type I restriction and modification systems of Escherichia coli

The genes (hsd A) encoding EcoA, a restriction and modification system first identified in Escherichia coli 15T-, behave in genetic crosses as alleles of the genes (hsd K) encoding the archetypal type I restriction and modification system of E. coli K12. Nevertheless, molecular experiments have failed to detect relatedness between the A and K systems. We have cloned the hsd A genes and have identified, on the basis of DNA homology, related genes (hsd E) conferring a new specificity to a natural isolate of E. coli. We show that the overall organization of the genes encoding EcoA and EcoE closely parallels that for EcoK. Each enzyme is encoded by three genes, of which only one, hsdS, confers the specificity of DNA interaction. The three genes are in the same order as those encoding EcoK, i.e. hsdR, hsdM and hsdS and, similarly, they include a promoter between hsdR and hsdM from which the M and S genes can be transcribed. The evidence indicates that EcoA and EcoE are type I restriction and modification enzymes, but they appear to identify an alternative family to EcoK. For both families, the hsdR polypeptide is by far the largest, but the sizes of the other two polypeptides are reversed, with the smallest polypeptide of EcoK being the product of hsd S, and the smallest for the EcoA family being the product of hsdM. Physiologically, the A restriction and modification system differs from that of K and its relatives, in that A-specific methylation of unmodified DNA is particularly effective.     

Cloning, production and characterisation of wild type and mutant forms of the R.EcoK endonucleases.

The hsdR, hsdM and hsdS genes coding for R.EcoK restriction endonuclease, both with and without a temperature sensitive mutation (ts-1) in the hsdS gene, were cloned in pBR322 plasmid and introduced into E.coli C3-6. The presence of the hsdSts-1 mutation has no effect on the R-M phenotype of this construct in bacteria grown at 42 degrees C. However, DNA sequencing indicates that the mutation is still present on the pBR322-hsdts-1 operon. The putative temperature-sensitive endonuclease was purified from bacteria carrying this plasmid and the ability to cleave and methylate plasmid DNA was investigated. The mutant endonuclease was found to show temperature-sensitivity for restriction. Modification was dramatically reduced at both the permissive and non-permissive temperatures. The wild type enzyme was found to cleave circular DNA in a manner which strongly suggests that only one endonuclease molecule is required per cleavage event. Circular and linear DNA appear to be cleaved using different mechanisms, and cleavage of linear DNA may require a second endonuclease molecule. The subunit composition of the purified endonucleases was investigated and compared to the level of subunit production in minicells. There is no evidence that HsdR is prevented from assembling with HsdM and HsdSts-1 to produce the mutant endonuclease. The data also suggests that the level of HsdR subunit may be limiting within the cell. We suggest that an excess of HsdM and HsdS may produce the methylase in vivo and that assembly of the endonuclease may be dependent upon the prior production of this methylase.     

Characterization of an<Emphasis Type="Italic">Eco</Emphasis>R 124I restriction-modification enzyme produced from a deleted form of the DNA-binding subunit,which results in a novel DNA specificity

We purified and characterized both the methyltransferase and the endonuclease containing the HsdS delta 50 subunit (type I restriction endonucleases are composed of three subunits--HsdR required for restriction, HsdM required for methylation and HsdS responsible for DNA recognition) produced from the deletion mutation hsdS delta 50 of the type IC R-M system EcoR 124I; this mutant subunit lacks the C-terminal 163 residues of HsdS and produces a novel DNA specificity. Analysis of the purified HsDs delta 50 subunit indicated that during purification it is subject to partial proteolysis resulting in removal of approximately 1 kDa of the polypeptide at the C-terminus. This proteolysis prevented the purification of further deletion mutants, which were determined as having a novel DNA specificity in vivo. After biochemical characterization of the mutant DNA methyltransferase (MTase) and restriction endonuclease we found only one difference comparing with the wild-type enzyme--a significantly higher binding affinity of the MTase for the two substrates of hemimethylated and fully methylated DNA. This indicates that MTase delta 50 is less able to discriminate the methylation status of the DNA during its binding. However, the mutant MTase still preferred hemimethylated DNA as the substrate for methylation. We fused the hsdM and hsdS delta 50 genes and showed that the HsdM-HsdS delta 50 fusion protein is capable of dimerization confirming the model for assembly of this deletion mutant.     

Sequence diversity among related genes for recognition of specific targets in DNA molecules

Escherichia coli strains K12 and B, and a new strain designated D, each encode a characteristic restriction and modification enzyme. These enzymes (EcoK, EcoB and presumably EcoD) comprise three subunits of which one, that encoded by the so-called specificity gene (hsdS), is responsible for recognition of the DNA sequence specific to that system. The other two subunits, encoded by hsdR and hsdM, are interchangeable between systems, and the available molecular evidence suggests that the hsdR and hsdM genes are highly conserved. The DNA sequence of a segment of the hsd region that includes the hsdS gene has been determined for each of the three strains. The hsdS gene varies in length from 1335 to 1425 base-pairs and the only regions showing obvious homology, one of about 100 base-pairs and a second of about 250 base-pairs, are highly conserved. The remainder of each hsd S gene shares little, or no, homology with either of the other related specificity genes. Thus, the specificity subunits, though components of a family of closely related enzymes with very similar functions, have remarkably dissimilar primary structure.     

A restriction map of IncFIV plasmid R124

A physical and genetic map of the 125.7-kb IncFIV plasmid R124 was constructed using the restriction enzymes Sal1 and EcoR1. Two discrete regions involved in plasmid replication were identified on the plasmid genome. One region was located on a 4.66-kb segment of an EcoR1 fragment at map coordinates 73.87 to 78.53 kb. Another was located within an 8.05-kb segment of an EcoR1 fragment at map coordinates 113.40 to 121.45. This region was very unstable but, when ligated to the 3.21-kb EcoR1 fragment E13 located at map coordinates 18.83 to 22.06 kb, replication was stable. Thus, at least three regions of R124 widely separated around the genome are associated with plasmid replication and stable maintenance. Each of these three regions expressed incompatibility with R124. The Tc resistance gene of R124 was located on the contiguous EcoR1 fragments E8 and E12 located at map coordinates 100.49 to 113.40.     

Sau1: a novel lineage-specific type I restriction-modification system that blocks horizontal gene transfer into Staphylococcus aureus and between S. aureus isolates of different lineages

The Sau1 type I restriction-modification system is found on the chromosome of all nine sequenced strains of Staphylococcus aureus and includes a single hsdR (restriction) gene and two copies of hsdM (modification) and hsdS (sequence specificity) genes. The strain S. aureus RN4220 is a vital intermediate for laboratory S. aureus manipulation, as it can accept plasmid DNA from Escherichia coli. We show that it carries a mutation in the sau1hsdR gene and that complementation restored a nontransformable phenotype. Sau1 was also responsible for reduced conjugative transfer from enterococci, a model of vancomycin resistance transfer. This may explain why only four vancomycin-resistant S. aureus strains have been identified despite substantial selective pressure in the clinical setting. Using a multistrain S. aureus microarray, we show that the two copies of sequence specificity genes (sau1hsdS1 and sau1hsdS2) vary substantially between isolates and that the variation corresponds to the 10 dominant S. aureus lineages. Thus, RN4220 complemented with sau1hsdR was resistant to bacteriophage lysis but only if the phage was grown on S. aureus of a different lineage. Similarly, it could be transduced with DNA from its own lineage but not with the phage grown on different S. aureus lineages. Therefore, we propose that Sau1 is the major mechanism for blocking transfer of resistance genes and other mobile genetic elements into S. aureus isolates from other species, as well as for controlling the spread of resistance genes between isolates of different S. aureus lineages. Blocking Sau1 should also allow genetic manipulation of clinical strains of S. aureus.     

Characterization of the maintenance functions of IncFIV plasmid R124

The genetic arrangement of the regions involved in R124 replication and incompatibility have been located and their homology to the IncFI basic replicons has been assessed. We show that R124 has homology with all three basic replicons, RepFIA, RepFIB, and RepFIC, and that these regions, FIVA, RepFIVB, and RepFIVC, are widely separated on the R124 genome. Cloning of autonomously replicating fragments has shown that RepFIVB and RepFIVC are functional in R124 and express incompatibility. The FIVA region was unable to form a functional replicon and when cloned into pUC8 lacked incompatibility activity. A fourth region of R124 was identified, which although not essential for replication stabilized mini-R124 plasmid replication and exhibited incompatibility with R124. This region, designated IncIV, showed no homology to RepFIA, RepFIB, or RepFIC. Incompatibility expression of IncIV required only the EcoRI fragment E13 but the strength of the reaction was modified in the presence of other fragments. The replication and incompatibility properties of an R124 deletion derivative indicated that R124 can switch its replication to either RepFIVB or RepFIVC when in the presence of an incompatible plasmid. The ambiguous incompatibility reactions reported for R124 is a result of the expression of the two functional replicons, RepFIVB and RepFIVC, and that expressed by IncIV.     

Genetic and physical studies of restriction-deficient mutants of the Inc FIV plasmids R124 and R124/3

Summary R124 and R124/3 are R plasmids that carry the genes for two different restriction and modification systems. The phenotype of strains carrying either of these plasmids along with the F'lac ⁺ plasmid, is restriction-deficient (Res^-). The Res^- phenotype is not due to selection of preexisting mutants but rather to a complex mutational event caused by the F plasmid. Restriction-deficient mutants carry extensive deletions and other DNA rearrangements. Tn7 insertion is used to locate the restriction gene. Many of the Res^- mutants are genetically unstable and revert at exceptionally high frequencies. Reversion is accompanied by DNA rearrangements which result in a net gain of 9 kb of DNA. F derivates of F⁺ which do not cause restriction-deficiency but do cause deletion were used to distinguish between the DNA rearrangements associated with restriction-deficiency and those associated with deletion. From Res⁺ revertants of strains carrying F'lac ⁺ and R124 or R124/3 we have isolated F plasmids that now carry the genes for the R124 or R124/3 restriction and modification systems. It is suggested that interaction between part of the F plasmid and that segment of the R plasmid which controls the switch in Res-Mod specificity which has been observed (Glover et al. 1983) is responsible for the production of restriction-deficiency.     

The type IC hsd loci of the enterobacteria are flanked by DNA with high homology to the phage P1 genome: implications for the evolution and spread of DNA restriction systems

Eco R124I, Eco DXXI and Eco prrI are the known members of the type IC family of DNA restriction and modification systems. The first three are carried on large, conjugative plasmids, while Eco prrI is chromosomally encoded. The enzymes are coded by three genes, hsdR , hsdM and hsdS . Analysis of the DNA sequences upstream and downstream of the type IC hsd loci shows that all are highly homologous to each other and also to sequences present in the bacteriophage P1 genome. The upstream sequences include functional phd and doc genes, which encode an addiction system that stabilizes the P1 prophage state, and extend to and beyond pac , the site at which phage DNA packaging begins. Downstream of the hsd loci, P1 DNA sequences begin at exactly the same place for all of the systems. For Eco DXXI and Eco prrI the P1 homology extends for thousands of base pairs while for Eco R124I an IS 1 insertion and an associated deletion have removed most of the P1-homologous sequences. The significance of these results for the evolution of DNA restriction and modification systems is discussed.     

DNA restriction and modification in Escherichia coli: functional analysis of the role of the dnaC(D) gene product

Escherichia coli strain PC-7 carries two independent temperature-sensitive mutations, one affecting the restriction and modification (R-M) phenotype and the other the DnaC(D) phenotype. The results of complementation and P1 transduction analysis of the mutation affecting the R-M phenotype implicate a fourth gene, designated hsdX, located close to the hsd three-gene complex. The properties of merodiploids constructed between appropriate recipients and F' elements with different mutations in hsdS, hsdR and hsdM genes might indicate that in strain PC-7 the temperature-sensitive products, determined by hsdR and hsdSK cistrons, are synthesized. The role of the temperature-sensitive dnaC(D) gene product in the formation of the restriction endonuclease was studied and no direct relation was found between the DnaC(D) and R-M phenotypes.     

Cloning and characterization of EcoRI and HindIII restriction endonuclease-generated fragments of antibiotic resistance plasmids R6-5 and R6

Summary DNA fragments generated by the EcoRI or HindIII endonucleases from the low copy number antibiotic resistance plasmids R6 and R6-5 were separately cloned using the high copy number ColEl or pML21 plasmid vectors and the insertional inactivation procedure. The hybrid plasmids that were obtained were used to determine the location of the EcoRI and HindIII cleavage sites on the parent plasmid genomes by means of electron microscope heteroduplex analysis and agarose gel electrophoresis. Ultracentrifugation of the cloned fragments in caesium chloride gradients localized the high buoyant density regions of R6-5 to fragments that carry the genes for resistance to streptomycin-spectinomycin, sulfonamide, and mercury and a low buoyant density region to fragments that carry the tetracycline resistance determinant. Functional analysis of hybrid plasmids localized a number of plasmid properties such as resistances to antibiotics and mercury and several replication functions to specific regions of the R6-5 genome. Precise localisation of the genes for resistance to chloramphenicol, kanamycin, fusidic acid and tetracycline was possible due to the presence of identified restriction endonuclease cleavage sites within these determinants.Only one region competent for autonomous replication was identified on the R6-5 plasmid genome and this was localized to EcoRI fragment 2 and HindIII fragment 1. However, two additional regions of replication activity designated RepB and RepC, themselves incapable of autonomous replication but capable of supporting replication of a linked ColE1 plasmid in polA^– bacteria, were also identified.     

The EcoDXX1 restriction and modification system: Cloning the genes and homology to type I restriction and modification systems

The Escherichia coli plasmid pDXX1 codes for a type I restriction and modification system, EcoDXX1. A 15.5-kb BamHI fragment from pDXX1 has been cloned and contains the hsdR, hsdM, and hsdS genes that encode the EcoDXX1 system. The EcoDXX1 hsd genes can complement the gene products of the EcoR124 and EcoR124/3 hsd systems, but not those of EcoK and Ecob. Hybridization experiments using EcoDXX1 hsd genes as a probe demonstrate homology between EcoDXX1 and EcoR124 and EcoR124/3 restriction-modification systems, but weak or no homology between EcoDXX1 and EcoK or EcoB systems.