Purification,structural characterization and biotechnological potential of tannase enzyme produced by Enterobacter cloacae strain 41

Tannase production by Enterobacter cloacae strain 41 was investigated under submerged fermentation which was optimized at various circumstances such as pH, temperature, substrate, and agitation, carbon, and nitrogen sources. Tannase was purified by a two-step approach comprising of ion exchange and size exclusion chromatography, respectively. The maximum tannase production was achieved at 1.0% tannic acid concentration, incubation temperature of 50 °C, and initial pH 6.0. The molecular weight of purified tannase was 45 kDa on 10% SDS-PAGE, and it was confirmed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry (MS). The enzymatic products of purified tannase were characterized by HPLC, TLC and FT-IR spectroscopy which showed the functional groups such as OH, CO, and CC. The purified tannase retained the activity up to 90% under the condition at 50 °C and pH 6.0 after 1 h incubation. Enzyme kinetics and inhibition studies were also investigated. Cytotoxicity studies showed that the tannase has no cytotoxic effects on Vero cell line. The results indicated the E. cloacae strain 41 would give a potential source for the efficient production of tannase and can be used in tannery effluent degradation, food, and pharmaceutical industrial applications.     

Distribution of tannic acid degrading microorganisms in the soil and comparative study of tannase from two fungal strains

A quantitative survey on microbial population including tannase producing organisms have been made from different soil samples. Most of the samples harbour negligible number of tannase producers in comparison to total microbial flora. Among the tannase producers, fungal members are more frequent than bacteria. Tannase production and tannic acid degradation have been studied in two newly isolated potent fungal strains. Both the strains produce maximum tannase at their stationary phases of growth. Enzymes produced by both the strains remain active within pH 3.5-6.0 and temperature 30-60 degrees C.     

单宁酶的固定化及其在酯型儿茶素水解反应中的应用

采用自制的壳聚糖为载体对单宁酶（ＴＡ）固定化,ＴＡ与壳聚糖配比１：２．５,３０℃固定２ｈ,活力回收达２３．６％～３３．１％;偶联效率为８４．９％～８８．０％。固定化单宁酶（ＩＴＡ）的表观Ｋｍ值（以没食子酸丙酯为底物）为２２．２×１０－６ｍｏｌ／Ｌ,ＴＡ的Ｋｍ值（以没食子酸丙酯为底物）为１０×１０－６ｍｏｌ／Ｌ,ＴＡ和ＩＴＡ的最适反应温度分别为４０℃和５０℃;６０℃处理１５ｍｉｎ,残存活性分别为１３．６％和６０．３％。ＴＡ和ＩＴＡ的最适ｐＨ值分别为５．８和６．４;ＴＡ在ｐＨ４．８～７．８活力稳定,而ＩＴＡ活力稳定范围在ｐＨ４．８～６．８．ＩＴＡ作用于ＥＧＣＧ的半衰期为７８．７ｈ,ＥＧＣＧ水解率达９０．３％。对茶多酚提取物进行水解,其所含的酯型儿茶素ＥＧＣＧ和ＥＣＧ水解率分别为９６．４％和９６．８％,非酯型儿茶素ＥＧＣ和ＥＣ的含量显著增加。     

Effect of fermentation system on the production and properties of tannase of Aspergillus niger van Tieghem MTCC 2425

The tannase-producing efficiency of liquid-surface fermentation (LSF) and solid-state fermentation (SSF) vis-à-vis submerged fermentation (SmF) was investigated in a strain of Aspergillus niger, besides finding out if there was a change in the activity pattern of tannase in these fermentation processes. The studies on the physicochemical properties were confined to intracellular tannase as only this form of enzyme was produced by A. niger in all three fermentation processes. In LSF and SmF, the maximum production of tannase was observed by 120 h, whereas in SSF its activity peaked at 96 h of growth. SSF had the maximum efficiency of enzyme production. Tannase produced by the SmF, LSF and SSF processes had similar properties except that the one produced during SSF had a broader pH stability of 4.5-6.5 and thermostability of 20 degrees-60 degrees C.     

Pestalotiopsis mangiferae isolated from cocoa leaves and concomitant tannase and gallic acid production

The enzyme tannase is of great industrial and biotechnological importance for the hydrolysis of vegetable tannins, reducing their undesirable effects and generating products for a wide range of processes. Thus, the search for new microorganisms that permit more stable tannase production is of considerable importance. A strain of P. mangiferae isolated from cocoa leaves was selected and investigated for its capacity to produce tannase enzymes and gallic acid through submerged fermentation. The assessment of the variables affecting tannase production by P. mangiferae showed that tannic acid, ammonium nitrate and temperature were the most significant (8.4 U/mL). The variables were analyzed using Response Surface Methodology - RSM (Box-Behnken design), with the best conditions for tannase production being: 1.9% carbon source, 1% nitrogen source and temperature of 23 °C. Tannase activity doubled (16.9 U/mL) after the optimization process when compared to the initial fermentation. A pH of 7.0 was optimal for the tannase and it presented stability above 80% with pH between 4.0 and 7.0 after 2h of incubation. The optimal temperature was 30 °C and activity remained at above 80% at 40–60 °C after 1 h. Production of gallic acid was achieved with 1% tannic acid (0.9 mg/mL) and P. mangiferae had not used up the gallic acid produced by tannic acid hydrolysis after 144 h of fermentation. A 5% tannic acid concentration was the best for gallic acid production (1.6 mg/mL). These results demonstrate P. mangiferae’s potential for tannase and gallic acid production for biotechnological applications.     

Characterization of a thermoalkalophilic esterase from a novel thermophilic bacterium, Anoxybacillus gonensis G2

Poly-3-hydroxybutyrate (P3HB) degradation capabilities of a novel bacterium, Anoxybacillus gonensis G2, were investigated. Both changes on film surfaces of the solution-cast films monitored by scanning electron microscopy (SEM) and weight loss up to 24% after 72 h exposure to A. gonensis G2 cultures indicated secretion of an active esterase responsible for the degradation of P3HB films. Kinetic parameters, Vmax and Km for the esterase activity of crude enzyme from A. gonensis G2 in the presence of p-nitrophenylbutyrate as substrate were observed as 50 U/L and 0.125 mM, respectively, in 50 mM phosphate buffer, pH 7.5 at 60 degrees C. The stimulation of the activity by Ca2+ is an evidence for the requirement of Ca2+ as a cofactor for the enzyme activity which is a characteristic for lipases/esterases. Inhibition of the esterase activity by metal chelating agents such as ethylenediamine tetraacetate, azide and cyanide has also supported the requirement of a metal ion for the activity. The thermal and pH stability profiles for the enzyme showed that the thermophilic bacterium A. gonensis G2 secretes an extracellular thermoalkalophilic PHB depolymerase active at 60 degrees C, and stable at this temperature for 120 min at pH 7.5 and for 24 h at pH 7.5-9.5 range at 4 degrees C by retaining over 75% of its initial activities.     

Production of tannase from wood-degrading fungus using as substrate plant residues: purification and characterization

In the present study Lenzites elegans, Schizophyllum commune, Ganoderma applanatum and Pycnoporus sanguineus (wood-degrading fungi) were assayed for their tannase producing potential in culture media containing plant residues or/and tannic acid as carbon source. Aspergillus niger was used as positive control for tannase production. We also carried out the isolation, purification and characterization of the enzyme from the fungi selected as the major productor. The highest fungal growth was observed in A. niger and L. elegans in the media containing tannic acid + glucose + plant residues (Fabiana densa). A. niger and L. elegans reached the highest extracellular tannase production in a medium containing tannic acid + F. densa and in a medium supplemented with glucose + tannic acid + F. densa. The produced enzyme by L. elegans was purified by DEAE-Sepharose. Km value was 5.5 mM and relative molecular mass was about 163,000. Tannase was stable at a pH range 3.0–6.0 and its optimum pH was 5.5. The enzyme showed an optimum temperature of 60°C and was stable between 40 and 60°C. This paper is the first communication of tannase production by wood-degrading fungi. Fermentation technology to produce tannase using plant residues and xylophagous fungi could be very important in order to take advantage of plant industrial waste.     

Effects of temperature, pH and additives on the activity of tannase produced by a co-culture of Rhizopus oryzae and Aspergillus foetidus

Summary Tannase was produced by modified solid-state fermentation (MSSF) of tannin rich substrates by a co-culture of the two filamentous fungi, Rhizopus oryzae and Aspergillus foetidus. The enzyme thus produced was then partially purified by solvent precipitation and DEAE-Sephadex column chromatography. A study on the effects of temperature and pH was made on the activity of tannase so purified. The optimum values of incubation time, reaction temperature and pH for tannase activity were 5 min, 40 °C and 5.0 respectively. The half-life period thermal stability and kinetic constants (K _m 0.21 mM, V _max 4.9×10⁻² M min^-1 at 40 °C) of this tannase were determined and the effects of different metal ions, surfactants, chelators, denaturants and inhibitors on the enzyme activity were also studied.     

Immobilization of Aspergillus oryzae tannase and properties of the immobilized enzyme

Tannase enzyme from Aspergillus oryzae was immobilized on various carriers by different methods. The immobilized enzyme on chitosan with a bifunctional agent (glutaraldehyde) had the highest activity. The catalytic properties and stability of the immobilized tannase were compared with the corresponding free enzyme. The bound enzyme retained 20·3% of the original specific activity exhibited by the free enzyme. The optimum pH of the immobilized enzyme was shifted to a more acidic range compared with the free enzyme. The optimum temperature of the reaction was determined to be 40 °C for the free enzyme and 55 °C for the immobilized form. The stability at low pH, as well as thermal stability, were significantly improved by the immobilization process. The immobilized enzyme exhibited mass transfer limitation as reflected by a higher apparent K_m value and a lower energy of activation. The immobilized enzyme retained about 85% of the initial catalytic activity, even after being used 17 times.     

Purification and characterization of tannase from Paecilomyces variotii: hydrolysis of tannic acid using immobilized tannase

An extracellular tannase (tannin acyl hydrolase) was isolated from Paecilomyces variotii and purified from cell-free culture filtrate using ammonium sulfate precipitation followed by ion exchange and gel filtration chromatography. Fractional precipitation of the culture filtrate with ammonium sulfate yielded 78.7% with 13.6-folds purification, and diethylaminoethyl–cellulose column chromatography and gel filtration showed 19.4-folds and 30.5-folds purifications, respectively. Molecular mass of tannase was found 149.8 kDa through native polyacrylamide gel electrophoresis (PAGE) analysis. Sodium dodecyl sulphate–PAGE revealed that the purified tannase was a monomeric enzyme with a molecular mass of 45 kDa. Temperature of 30 to 50°C and pH of 5.0 to 7.0 were optimum for tannase activity and stability. Tannase immobilized on alginate beads could hydrolyze tannic acid even after extensive reuse and retained about 85% of the initial activity. Thin layer chromatography, high performance liquid chromatography, and ¹H-nuclear magnetic resonance spectral analysis confirmed that gallic acid was formed as a byproduct during hydrolysis of tannic acid.     

Tannase production by Aspergillus aculeatus DBF9 through solid-state fermentation

Tannase an industrially important enzyme was produced by Aspergillus aculeatus DBF9 through a solid-state fermentation (SSF). The organism produced good amount of enzyme and gallic acid in wheat bran among the solid substrate used in SSF. Maximum enzyme and gallic acid production occurred in 5% tannic acid after 72 h. Eighty percent initial substrate moisture and 30 degrees C temperature was found suitable for tannase production.     

Purification and characterization of extracellular tannin acyl hydrolase from <Emphasis Type="Italic">Aspergillus heteromorphus</Emphasis> MTCC 8818

A tannase (E.C. 3.1.1.20) producing fungal strain was isolated from soil and identified as Aspergillus heteromorphus MTCC 8818. Maximum tannase production was achieved on Czapek Dox minimal medium containing 1% tannic acid at a pH of 4.5 and 30°C after 48 h incubation. The crude enzyme was purified by ammonium sulfate precipitation and ion exchange chromatography. Diethylaminoethyl-cellulose column chromatography led to an overall purification of 39.74-fold with a yield of 19.29%. Optimum temperature and pH for tannase activity were 50°C and 5.5 respectively. Metal ions such as Ca²⁺, Fe²⁺, Cu¹⁺, and Cu²⁺ increased tannase activity, whereas Hg²⁺, Na¹⁺, K¹⁺, Zn²⁺, Ag¹⁺, Mg²⁺, and Cd²⁺ acted as enzyme inhibitors. Various organic solvents such as isopropanol, isoamyl alcohol, benzene, methanol, ethanol, toluene, and glycerol also inhibited enzyme activity. Among the surfactants and chelators studied, Tween 20, Tween 80, Triton X-100, EDTA, and 1, 10-o-phenanthrolein inhibited tannase activity, whereas sodium lauryl sulfate enhanced tannase activity at 1% (w/v).     

Production, purification and characterization of thermostable phytase from thermophilic fungus Thermomyces lanuginosus TL-7

Ten different strains of Thermomyces lanuginosus, isolated from composting soils were found to produce phytase when grown on PSM medium. The wild type strain CM was found to produce maximum amount ofphytase (4.33 units/g DW substrate). Culturing T. lanuginosus strain CM on medium containing wheat bran and optimizing other culture conditions (carbon source, media type, nitrogen source, level of nitrogen, temperature, pH, inoculum age, inoculum level and moisture), increased the phytase yield to 13.26 units/g substrate. This culture was further subjected to UV mutagenesis for developing phytase hyperproducing mutants. The mutant (TL-7) showed 2.29-fold increase in phytase activity as compared to the parental strain. Employing Box-Behnken factor factorial design of response surface methodology resulted in optimized phytase production (32.19 units/g of substrate) by mutant TL-7. A simple two-step purification (40.75-folds) ofphytase from mutant TL-7 was achieved by anion exchange and gel filtration chromatography. The purified phytase (approximately 54 kDa) was characterized to be optimally active at pH 5.0 and temperature 70 degrees C, though the enzyme showed approximately 70% activity over a wide pH and temperature range (2.0-10.0 and 30-90 degrees C, respectively). The phytase showed broad substrate specificity with activity against sodium phytate, ADP and riboflavin phosphate. The phytase from T. lanuginosus was thermoacidstable as it showed up to 70% residual activity after exposure to 70 degrees C at pH 3.0 for 120 min. The enzyme showed Km 4.55 microM and Vmax 0.833 microM/min/mg against sodium phytate as substrate.     

重组大肠杆菌热稳定性过氧化氢酶的纯化及性质研究

将产热稳定性过氧化氢酶的重组大肠杆菌培养后菌体破碎得到的粗酶液经热处理、硫酸铵分级沉淀、DEAE\|Sephadex A\|50离子交换层析、HiPrep16/10 Phenyl疏水作用层析、Superdex200 HR 10/30凝胶层析提纯后得到电泳纯的酶,比酶活达到15629U/mg。此酶的最适温度为70℃,最适pH70,在60℃保温60min酶活力基本不变,在pH3～8的范围内比较稳定。此酶的Km和Vmax分别为775mmol/L和278mmol\5min\+\{-1\}·mg-1。1mmol/L的Zn2+、Ba2+、Mn2+可使该酶完全失活,KCN、NaN\-3、Na\-2S\-2O\-4、巯基乙醇对酶活力有抑制作用,50mmol/L的EDTA不影响酶活性。     

Thermostable xylanase from Marasmius sp.: purification and characterization

We have screened 766 strains of fungi from the BIOTEC Culture Collection (BCC) for xylanases working in extreme pH and/or high temperature conditions, the so-called extreme xylanases. From a total number of 32 strains producing extreme xylanases, the strain BCC7928, identified by using the internal transcribed spacer (ITS) sequence of rRNA to be a Marasmius sp., was chosen for further characterization because of its high xylanolytic activity at temperature as high as 90 degrees C. The crude enzyme possessed high thermostability and pH stability. Purification of this xylanase was carried out using an anion exchanger followed by hydrophobic interaction chromatography, yielding the enzyme with >90% homogeneity. The molecular mass of the enzyme was approximately 40 kDa. The purified enzyme retained broad working pH range of 4-8 and optimal temperature of 90 degrees C. When using xylan from birchwood as substrate, it exhibits Km and Vmax values of 2.6 +/- 0.6 mg/ml and 428 +/- 26 U/mg, respectively. The enzyme rapidly hydrolysed xylans from birchwood, beechwood, and exhibited lower activity on xylan from wheatbran, or celluloses from carboxymethylcellulose and Avicel. The purified enzyme was highly stable at temperature ranges from 50 to 70 degrees C. It retained 84% of its maximal activity after incubation in standard buffer containing 1% xylan substrate at 70 degrees C for 3 h. This thermostable xylanase should therefore be useful for several industrial applications, such as agricultural, food and biofuel.     

Purification and characterization of carbonic anhydrase from bovine erythrocyte plasma membrane

Carbonic anhydrase (CA) was purified from bovine erythrocyte plasma membrane and characterized in this study. For this purpose, the blood taken from young animals was hemolysed, the membrane fraction was separated, and this fraction was repeatedly washed. The enzyme (CA) was removed from the membrane with buffered TritonX-100 (1%); it could be purified at a factor of 22.8 by affinity chromatography.The CA obtained from erythrocyte membrane has an esterase activity as well as hydratase activity. The Vmax and Km of the enzyme for the substrate (p-nitrophenyl acetate) are 1.948x10(-3) mM/L x dak, and 3.596 mM, respectively. The purification degree of the enzyme was controlled by SDS-PAGE (3-10), which showed two distinct bands. It was determined that the enzyme had activity within the pH range of 4.5-9.5 and that the optimal pH was 7.5. The temperature at which it showed activity was 20-60 degrees C and optimal temperature was 37 degrees C. Molecular weight of CA was found to be 29844 and 61706 Dalton by gel filtration. On the other hand, sulfanilamide and acetazolamide affected the enzyme.     

A new bilirubin-degrading enzyme from orange peels

A novel enzyme activity that catalyzes the degradation of unconjugated bilirubin (Bu) has been demonstrated in extracts of the peels of edible oranges. Unlike the few known bilirubin-oxidizing enzymes, the orange enzyme does not produce biliverdin as a product, does not seem to require oxygen, and has a unique absorption spectrum of its products. Even at the crude stage, the enzyme has a specific activity that is 10 and 20 times higher, respectively, than those reported for the crude or partially purified Bu-degrading enzymes from mushrooms and rat liver. The enzyme has a pH optimum near 7.5 and a Km value of 50-100 microM for Bu. The enzyme is remarkably stable, retaining over 50% activity after prolonged digestion with proteinase K or heating at 100 degrees C. Similar treatments inactivated the bilirubin oxidase from Myrothecium verrucaria MT-1. The enzyme is poorly soluble in water but can be partially solubilized with cholic acid, with a doubling in specific activity.     

Production and characterization of tannase from Bacillus cereus KBR9

A tannase-producing soil bacteria has been isolated and identified as Bacillus cereus. It can degrade tannic acid and produce maximum tannase (0.22 U/ml) at stationary phases of growth (24 h). Maximum growth and enzyme production occurred with initial medium pH of 4.5-5.0. Partial purified tannase showed optimum activity at pH 4.5 and 40 degrees C. It remains stable up to 30 degrees C and pH 4.5 to 5.0. The enzyme is salt tolerant, stable up to 2 m of NaCl and retains 82% original activity in 3 m.     

Secretion, purification, and characterization of a recombinant Aspergillus oryzae tannase in Pichia pastoris

Tannase (tannin acyl hydrolase) is an industrially important enzyme produced by a large number of fungi, which hydrolyzes the ester and depside bonds of gallotannins and gallic acid esters. In the present work, a tannase from Aspergillus oryzae has been cloned and expressed in Pichia pastoris. The catalytic activity of the recombinant enzyme was assayed. A secretory form of enzyme was made with the aid of Saccharomyces cerevisiae alpha-factor, and a simple procedure purification protocol yielded tannase in pure form. The productivity of secreted tannase achieved 7000 IU/L by fed-batch culture. Recombinant tannase had a molecular mass of 90 kDa, which consisted of two kinds of subunits linked by a disulfide bond(s). Our study is the first report on the heterologous expression of tannase suggesting that the P. pastoris system represents an attractive means of generating large quantities of tannase for both research and industrial purpose.     

One-step purification of chitinase from Serratia marcescens NK1, a soil isolate

AIMS: A simple single step technique of gel filtration was developed for the purification of chitinase from Serratia marcescens NK1. METHODS AND RESULTS: Chitinase from Ser. marcescens NK1 was purified to homogeneity by gel filtration chromatography with 9.2% recovery. The enzyme had a pH optimum of 6.2 and a temperature optimum of 47 degrees C. It was stable in a wide pH range of 3.0 to 10.0, retaining 60% activity at pH 3.0 and 65% activity at pH 10.5. It retained 70% activity at 28 degrees C after 72 h and nearly 50% activity at 50 degrees C up to 24 h. CONCLUSION: The chitinase from Ser. marcescens NK1 can be efficiently purified in a single step by gel filtration chromatography. The chitinase of Ser. marcescens NK1, a soil isolate, is highly stable and as active as that of other reported isolates of Ser. marcescens. SIGNIFICANCE AND IMPACT OF THE STUDY: This purification scheme is advantageous because of its simplicity and can therefore be applied for the purification of other enzymes. The yield is sufficient for initial characterization studies of the enzyme, and an improved resolution can be obtained if the chromatography is done under fast flow systems.