Modulation of the effects of mutations in the basic region of the OmpA signal peptide by the mature portion of the protein

Oligonucleotide-directed site-specific mutagenesis was used to study the structure-function relationship of the positively charged amino terminus of the Escherichia coli outer membrane protein OmpA signal peptide. Mutations were isolated which reduced the overall charge of the amino-terminal region from +2 (wild type) to +1, 0, and -1, as well as one mutation from Thr to Ser at position 4. DNA encoding the wild type and mutant OmpA signal peptides was then fused in-frame to DNA encoding the mature regions of Staphylococcus aureus nuclease A and TEM beta-lactamase. In the case of both the beta-lactamase and nuclease fusions, normal processing was no longer observed when the charge at the amino terminus was reduced to zero or made negative. Differences between the two hybrid proteins were observed in the case of the Thr to Ser mutation. As expected, this mutation had no effect on the beta-lactamase hybrid; however, the processing rate of the nuclease hybrid protein was reduced to nearly one-half. Furthermore, this effect was essentially reversed when a Lys residue at position 3 was deleted. A model is presented which explains the differing effects of a signal peptide mutation on the secretion of different hybrid proteins based on kinetic differences in the translocation of the nuclease and beta-lactamase proteins.     

Enhancement of protein translocation across the membrane by specific mutations in the hydrophobic region of the signal peptide.

The hydrophobic region of the signal peptide of the OmpA protein of the Escherichia coli outer membrane was extensively altered in its hydrophobicity and predicted secondary structure by site-specific mutagenesis. The mutated signal peptides were fused to nuclease A from Staphylococcus aureus, and the function of the signal peptide was examined by measuring the rate of processing of the signal peptide. Six of the 12 mutated signal peptides in the nuclease hybrid were processed faster than the wild-type. In particular, the processing of the mutated signal peptide in which the alanine residue at position 9 was substituted with a valine residue was enhanced almost twofold over the processing of the wild-type signal peptide. In addition, the production of nuclease A fused with this mutated signal peptide also increased twofold. However, these effects were not observed when the mutated signal peptide was fused to TEM beta-lactamase. Analysis of the present mutations suggests that both overall hydrophobicity and distinct structural requirements in the hydrophobic region have important roles in signal peptide function.     

Effect of signal peptide changes on the extracellular processing of streptokinase from Escherichia coli : requirement for secondary structure at the cleavage junction

Streptokinase (SK), an extracellular protein from Streptococcus equisimilis, is secreted post-translationally by Escherichia coli using both its native and E. coli-derived transport signals. In this communication we report that cleavage specificity of signal peptidase I, and thus efficiency of secretion, varies in E. coli when SK export is directed by different transport signals. The native (+1) N-terminus of mature SK was retained when it was transported under the control of its own, PelB or LamB signal peptide. However, when translocation of SK was controlled by the OmpA or MalE signal peptide, Ala2 of mature SK was preferred as a cleavage site for the pre-SK processing. Our results indicate that compatibility of the leader peptide with the mature sequences of SK, which fulfils the requirement for a given secondary structure within the cleavage region, is essential for maintaining the correct processing of pre-SK. An OmpA-SK fusion, which results in the deletion of two N-terminal amino acid residues of mature SK, was further studied with respect to the recognition of alternative cleavage site in E. coli. The alanine at +2 in mature SK was changed to glycine or its relative position was changed to +3 by introducing a methionine residue at the +1 position. Both alterations resulted in the correct cleavage of pre-SK at the original OmpA fusion site. In contrast, introduction of an additional alanine at +4, creating three probable cleavage sites (Ala-x-Ala-x-Ala-x-Ala), resulted in the recognition of all three target sites for cleavage, with varying efficiency. The results indicate that the nature of the secondary structure generated at the cleavage junction of pre-SK, resulting from the fusion of different signal peptides, modulates the cleavage specificity of signal peptidase I during extracellular processing of SK. Based on these findings it is proposed that flexibility in the interaction of the active site of signal peptidase I with the cleavage sites of signal peptides may occur when it encounters two or more juxtaposed cleavage sites. Preference for one cleavage site over another, then, may depend on fulfillment of secondary structure requirements in the vicinity of the pre-protein cleavage junction.     

Requirement of pro-sequence for the production of active subtilisin E in Escherichia coli

Subtilisin E, an alkaline serine protease of Bacillus subtilis 168, is first produced as a precursor, pre-pro-subtilisin, which consists of a signal peptide for protein secretion (pre-sequence) and a peptide extension of 77 amino acid residues (pro-sequence) between the signal peptide and mature subtilisin. When the entire coding region for pre-pro-subtilisin E was cloned into an Escherichia coli expression vector, active mature subtilisin E was secreted into the periplasmic space. When the pre-sequence was replaced with the E. coli OmpA signal peptide, active subtilisin E was also produced. When the OmpA signal peptide was directly fused to the mature subtilisin sequence, no protease activity was detected, although this product had the identical primary structure as subtilisin E as a result of cleavage of the OmpA signal peptide and was produced at a level of approximately 10% of total cellular protein. When the OmpA signal peptide was fused to the 15th or 44th amino acid residue from the amino terminus of the pro-sequence, active subtilisin was also not produced. These results indicate that the pro-sequence of pre-pro-subtilisin plays an important role in the formation of enzymatically active subtilisin. It is proposed that the pro-sequence is essential for guiding appropriate folding of the enzymatically active conformation of subtilisin E.     

Effect of signal peptide changes on the extracellular processing of streptokinase from Escherichia coli : requirement for secondary structure at the cleavage junction

Streptokinase (SK), an extracellular protein from Streptococcus equisimilis, is secreted post-translationally by Escherichia coli using both its native and E. coli-derived transport signals. In this communication we report that cleavage specificity of signal peptidase I, and thus efficiency of secretion, varies in E. coli when SK export is directed by different transport signals. The native (+1) N-terminus of mature SK was retained when it was transported under the control of its own, PelB or LamB signal peptide. However, when translocation of SK was controlled by the OmpA or MalE signal peptide, Ala2 of mature SK was preferred as a cleavage site for the pre-SK processing. Our results indicate that compatibility of the leader peptide with the mature sequences of SK, which fulfils the requirement for a given secondary structure within the cleavage region, is essential for maintaining the correct processing of pre-SK. An OmpA-SK fusion, which results in the deletion of two N-terminal amino acid residues of mature SK, was further studied with respect to the recognition of alternative cleavage site in E. coli. The alanine at +2 in mature SK was changed to glycine or its relative position was changed to +3 by introducing a methionine residue at the +1 position. Both alterations resulted in the correct cleavage of pre-SK at the original OmpA fusion site. In contrast, introduction of an additional alanine at +4, creating three probable cleavage sites (Ala-x-Ala-x-Ala-x-Ala), resulted in the recognition of all three target sites for cleavage, with varying efficiency. The results indicate that the nature of the secondary structure generated at the cleavage junction of pre-SK, resulting from the fusion of different signal peptides, modulates the cleavage specificity of signal peptidase I during extracellular processing of SK. Based on these findings it is proposed that flexibility in the interaction of the active site of signal peptidase I with the cleavage sites of signal peptides may occur when it encounters two or more juxtaposed cleavage sites. Preference for one cleavage site over another, then, may depend on fulfillment of secondary structure requirements in the vicinity of the pre-protein cleavage junction. Received: 22 September 1997 / Accepted: 17 December 1997     

Export incompatibility of N-terminal basic residues in a mature polypeptide of Escherichia coli can be alleviated by optimising the signal peptide

Summary Export of the outer membrane protein, OmpA, across the cytoplasmic membrane of Escherichia coli was severely inhibited by the presence of two, three, four or six additional basic residues at the N-terminus of the mature polypeptide, but not by three similarily positioned acidic residues. Because a few bacterial proteins do possess basic residues close to the leader peptidase cleavage site and because the type of inhibition described here could pose problems in the construction of hybrid secretory proteins, we also studied means of alleviating this form of export incompatibility. Inhibition was abolished when basic residues were preceded by acidic ones. Also, the processing rates of the mutants with two or six basic residues could be partially restored by increasing the length of the hydrophobic core of the signal peptide. Taking this as a precedent, it is suggested that the structure of the signal peptide is an important feature for maintenance of a reasonable rate of translocation of those exported proteins which possess basic residue(s) at the N-terminus of the mature polypeptide.     

Overexpression of native human beta 2-microglobulin in Escherichia coli and its purification

beta 2-Microglobulin (beta 2M), the small subunit of human leukocyte antigen (HLA) class-I proteins, has been synthesized in Escherichia coli and purified in mg amounts. A beta 2m cDNA clone was fused in-frame behind DNA encoding the signal sequence for the outer membrane protein, OmpA. Three different constructions were made, whose products differed by the insertion of either an extra Ala residue, the hexapeptide AEFLEA [single-letter amino acid (aa) code], or no aa between the OmpA signal sequence and beta 2M-coding sequence. All three protein products were correctly processed by bacterial signal peptidase, as determined by N-terminal sequencing, and all three were secreted as soluble proteins into the periplasmic space. However, the signal sequence of the preprotein with the inserted hexapeptide, AEFLEA, was cleaved to a much greater degree than the other two preproteins. When there was no insertion, the mature protein was identical to human beta 2M, as analyzed by sodium dodecyl sulfate-polyacrylamide-gel electrophoresis, circular dichroism, and native isoelectric focusing. This 'bacterial beta 2M', radiolabeled with Bolton-Hunter reagent, was able to exchange into papain-solubilized HLA-B7, as determined by Sephadex G-75 chromatography and immune precipitation, indicating that bacterial beta 2M could complex with the heavy chain of HLA-B7.     

Alterations to the signal peptide of an outer membrane protein (OmpA) of Escherichia coli K-12 can promote either the cotranslational or the posttranslational mode of processing

The signal sequence of the precursor of the Escherichia coli outer membrane protein OmpA was altered by oligonucleotide insertions into the corresponding gene. In one case, OmpA-S1, the hydrophobic core of the signal peptide, is reduced from 12 to 10 residues, and one positive charge is added near the NH2-terminus. In another case, OmpA-P1, the hydrophobic core is extended from 12 to 16 residues. The pro-OmpA protein is normally processed partially co- and partially posttranslationally. Processing of the pro-OmpA-S1 protein was entirely posttranslational and that of the pro-OmpA-P1 protein strictly cotranslational. Evidence is presented which strongly suggests that posttranslational processing reflects posttranslational translocation across the plasma membrane. The generation times of cells expressing pro-OmpA-P1 or pro-OmpA-S1 were identical and the pro-OmpA-S1 polypeptide could be chased into the mature protein in the absence of protein synthesis. Hence, it does not matter which mode of processing, or rather translocation, is used. The same oligonucleotides were inserted into the ompA gene of plasmid pRD87; a plasmid which leads to overproduction of the protein and to massive accumulation of both the mature protein and the precursor. In the OmpA signal sequence encoded by pRD87-P2 the hydrophobic core is extended from 12 to 20 residues. This peptide was also rapidly removed. Therefore, regardless of whether the hydrophobic core contains 12, 16, or 20 lipophilic residues, not only does the signal sequence always function correctly to mediate export, but in each case, the cleavage site is always accessible to the signal peptidase.     

Effect of OmpA signal peptide mutations on OmpA secretion, synthesis, and assembly.

In previous investigations, we have examined the effect of OmpA signal peptide mutations on the secretion of the two heterologous proteins TEM beta-lactamase and nuclease A. During these studies, we observed that a given signal peptide mutation could affect differentially the processing of precursor OmpA-nuclease or precursor OmpA-lactamase. This observation led us to further investigate the influence of the mature region of a precursor protein on protein export. Preexisting OmpA signal peptide mutations of known secretion phenotype when directing heterologous protein export (nuclease A or beta-lactamase) were fused to the homologous mature OmpA protein. Four signal peptide mutations that have previously been shown to prevent export of nuclease A and beta-lactamase were found to support OmpA protein export, albeit at reduced rates. This remarkable retention of export activity by severely defective precursor OmpA signal peptide mutants may be due to the ability of mature OmpA to interact with the cytoplasmic membrane. In addition, these same signal peptide mutations can affect the level of OmpA synthesis as well as its proper assembly in the outer membrane of Escherichia coli. Two signal peptide mutations dramatically stimulate the rate of precursor OmpA synthesis three- to fivefold above the level observed when a wild-type signal peptide is directing export. The complete removal of the OmpA signal peptide does not result in increased OmpA synthesis. This finding suggests that the signal peptide mutations function positively to stimulate OmpA synthesis, rather than bypass a down-regulatory mechanism effected by a wild-type signal peptide. Overproduction of wild-type precursor OmpA or precursors containing signal peptide mutations which lead to relatively minor kinetic processing defects results in accumulation of an improperly assembled OmpA species (imp-OmpA). In contrast, signal peptide mutations which cause relatively severe processing defects accumulate no or only small quantities of imp-OmpA. All mutations result in equivalent levels of properly assembled OmpA. Thus, a strong correlation between imp-OmpA accumulation and cell toxicity was observed. A mutation in the mature region of OmpA which prevents the proper outer membrane assembly of OmpA was suppressed when export was directed by a severely defective signal peptide. These findings suggest that signal peptide mutations indirectly influence OmpA assembly in the outer membrane by altering both the level and rate of OmpA secretion across the cytoplasmic membrane.     

Parallel effects of signal peptide hydrophobic core modifications on co-translational translocation and post-translational cleavage by purified signal peptidase

The length of the hydrophobic core of the bovine parathyroid hormone signal peptide was modified by in vitro mutagenesis. Extension of the hydrophobic core by three amino acids at the NH2-terminal end had little effect on the proteolytic processing of the signal peptide by microsomal membranes. Deletion of 6 of the 12 amino acids in the core eliminated translocation and processing of the modified protein. Deletion of pairs of amino acids across the core resulted in position-dependent inhibition of signal activity unrelated to hydrophobicity but inversely related to the hydrophobic moments of the modified cores. Deletions in the NH2-terminal region of the core were strongly inhibitory for proteolytic processing whereas deletions in the COOH-terminal region had no effect or increased processing when assessed either co-translationally with microsomal membranes or post-translationally with purified hen oviduct signal peptidase. Deletion of cysteine 18 and alanine 19 increased processing, but deletion of cysteine alone or substitution of leucine for cysteine did not increase processing more than deletion of both residues at 18 and 19. Translations of the translocation-defective mutants with pairs of amino acids deleted in a wheat germ system were inhibited by addition of exogenous signal recognition particle suggesting that interactions of the modified signal peptides with signal recognition particle were normal. The position-dependent effects of the hydrophobic core modifications indicate that structural properties of the core in addition to hydrophobicity are important for signal activity. The parallel effects of the modifications on co-translational translocation and post-translational processing by purified signal peptidase suggest that proteins in the signal peptidase complex might be part of, or intimately associated with, membrane proteins involved in the translocation. A model is proposed in which the NH2-terminal region of the hydrophobic core binds to one subunit of the signal peptidase while the other subunit catalyzes the cleavage.     

Lethal mutations in the structural gene of an outer membrane protein (OmpA) of Escherichia coli K12

Summary The gene ompA encodes a major outer membrane protein of Escherichia coli. Localized mutagenesis of the part of the gene corresponding to the 21-residue signal sequence and the first 45 residues of the protein resulted in alterations which caused cell lysis when expressed. DNA sequence analyses revealed that in one mutant type the last CO₂H-terminal residue of the signal sequence, alanine, was replaced by valine. The proteolytic removal of the signal peptide was much delayed and most of the unprocessed precursor protein was fractioned with the outer membrane. However, this precursor was completely soluble in sodium lauryl sarcosinate which does not solubilize the OmpA protein or fragments thereof present in the outer membrane. Synthesis of the mutant protein did not inhibit processing of the OmpA or OmpF proteins. In the other mutant type, multiple mutational alterations had occurred leading to four amino acid substitutions in the signal sequence and two affecting the first two residues of the mature protein. A reduced rate of processing could not be clearly demonstrated. Membrane fractionation suggested that small amounts of this precursor were associated with the plasma membrane but synthesis of this mutant protein also did not inhibit processing of the wild-type OmpA or OmpF proteins. Several lines of evidence left no doubt that the mature, mutant protein is stably incorporated into the outer membrane. It is suggested that the presence, in the outer membrane, of the mutant precursor protein in the former case, or of the mutant protein in the latter case perturbs the membrane architecture enough to cause cell death.     

Signal peptide subsegments are not always functionally interchangeable. M13 procoat hydrophobic core fails to transport alkaline phosphatase in Escherichia coli

Bacterial signal peptides display little amino acid sequence homology despite their shared role in mediating protein transport. This heterogeneity may exist to permit the establishment of signal peptide conformations that are appropriate for transport of particular proteins. In this paper we explore how signal peptides are composed of structural units that may interact with each other and with the mature protein to effect transport. Using a new application of cassette mutagenesis, we have replaced the hydrophobic core of the Escherichia coli alkaline phosphatase signal peptide with cores from the signals of maltose-binding protein, OmpA, and M13 major coat protein. The core regions from maltose-binding protein and OmpA effectively replaced the alkaline phosphatase core; the resultant hybrid signals performed as well as wild type in periplasmic transport and processing of alkaline phosphatase. However, the core region from M13 major coat protein generated a transport-incompetent hybrid signal peptide. Elimination of a proline-containing portion of the M13 major coat protein core did not improve transport effectiveness. However, restoration of the procoat cleavage region and the negatively charged amino terminus of the mature protein did ameliorate the transport defect. These results suggest that at least in the case of these procoat-derived signal peptide mutants, there is a requirement for complementarity among the hydrophobic core, cleavage region, and part of the mature protein in order for efficient protein transport to occur.     

Site-specific mutations in the COOH-terminus of placental alkaline phosphatase: a single amino acid change converts a phosphatidylinositol- glycan-anchored protein to a secreted protein

Placental alkaline phosphatase (PLAP) is anchored in the plasma membrane by a phosphatidylinositol-glycan moiety (PI-glycan). PI-glycan is added posttranslationally to the nascent peptide chain after the removal of 29 amino acids from the COOH-terminus. The contribution of selected COOH-terminal amino acids to the signal for PI-glycan addition was tested by creating a fusion protein with the COOH-terminus of PLAP and a secreted protein and by mutagenesis of specific PLAP COOH-terminal amino acids. The cDNA encoding the COOH-terminus of PLAP was fused in frame to the cDNA for human clotting Factor X and expressed in transfected COS-1 cells. Fusion proteins containing 32 amino acids of the PLAP COOH-terminus were modified by PI-glycan addition. Thus, the signal for PI-glycan modification must reside in these amino acids. Next, the region between the hydrophobic domain and the cleavage site was examined for additional determinants. Mutations of the hydrophilic residues in the spacer region demonstrated that these amino acids do not contribute to the signal for PI-glycan addition. Deletion of amino acids in the spacer region prevented the addition of PI-glycan suggesting that the length of the spacer domain or the amino acids around the cleavage site are important determinants. Finally, we demonstrated that interruption of the hydrophobic domain by a charged residue prevents PI-glycan addition and results in a protein that is secreted into the medium. The finding that a single Leu to Arg substitution in the hydrophobic domain converts a PI-glycan anchored, membrane protein to a secreted protein suggests that an essential signal for the correct sorting of PI-glycan anchored proteins versus secreted proteins resides in the hydrophobic domain. Substitution of a charged amino acid for a hydrophobic amino acid may be a mechanism for producing membrane bound and secreted forms of the same protein.     

Synthesis of Escherichia coli heat-stable enterotoxin STp as a pre-pro form and role of the pro sequence in secretion.

Escherichia coli heat-stable enterotoxin STp is presumed from its DNA sequence to be synthesized in vivo as a 72-amino-acid residue precursor that is cleaved to generate mature STp consisting of the 18 carboxy-terminal amino acid residues. There are two methionine residues in the inferred STp sequence in addition to the methionine residue at position 1. In order to confirm production of the STp 72-amino-acid residue precursor, we substituted the additional methionine residues by oligonucleotide-directed site-specific mutagenesis. Since these substitutions did not cause a significant change in STp production, it can be concluded that STp is normally synthesized as the 72-amino-acid residue precursor. The length of the STp precursor indicated the existence of a pro sequence between the signal peptide and the mature protein. In order to identify the pro sequence and determine its role in protein secretion, deletion and fusion proteins were made. A deletion mutant in which the gene fragment encoding amino acid residues 22 to 53 of STp was removed was made. STp activity was found in the culture supernatant of cells. Amino acid sequence analysis of the purified STp deletion mutant revealed that the pro sequence encompasses amino acid residues 20 to 54. A hybrid protein consisting of STp amino acids 1 to 53 fused in frame from residue 53 to nuclease A was not secreted into the culture supernatant. These results indicate that the pro sequence does not function to guide periplasmic protein into the extracellular milieu.     

A putative signal peptidase recognition site and sequence in eukaryotic and prokaryotic signal peptides

Presecretory signal peptides of 39 proteins from diverse prokaryotic and eukaryotic sources have been compared. Although varying in length and amino acid composition, the labile peptides share a hydrophobic core of approximately 12 amino acids. A positively charged residue (Lys or Arg) usually precedes the hydrophobic core. Core termination is defined by the occurrence of a charged residue, a sequence of residues which may induce a beta-turn in a polypeptide, or an interruption in potential alpha-helix or beta-extended strand structure. The hydrophobic cores contain, by weight average, 37% Leu: 15% Ala: 10% Val: 10% Phe: 7% Ile plus 21% other hydrophobic amino acids arranged in a non-random sequence. Following the hydrophobic cores (aligned by their last residue) a highly non-random and localized distribution of Ala is apparent within the initial eight positions following the core: (formula; see text) Coincident with this observation, Ala-X-Ala is the most frequent sequence preceding signal peptidase cleavage. We propose the existence of a signal peptidase recognition sequence A-X-B with the preferred cleavage site located after the sixth amino acid following the core sequence. Twenty-two of the above 27 underlined Ala residues would participate as A or B in peptidase cleavage. Position A includes the larger aliphatic amino acids, Leu, Val and Ile, as well as the residues already found at B (principally Ala, Gly and Ser). Since a preferred cleavage site can be discerned from carboxyl and not amino terminal alignment of the hydrophobic cores it is proposed that the carboxyl ends are oriented inward toward the lumen of the endoplasmic reticulum where cleavage is thought to occur. This orientation coupled with the predicted beta-turn typically found between the core and the cleavage site implies reverse hairpin insertion of the signal sequence. The structural features which we describe should help identify signal peptides and cleavage sites in presumptive amino acid sequences derived from DNA sequences.     

Isolation and characterisation of a cDNA encoding the precursor for human apolipoprotein AII

cDNA clones encoding human apolipoprotein AII have been isolated from an adult liver cDNA library. Apo AII mRNA was shown to be approximately 600 bases in length by RNA blot hybridisation. The intracellular precursor of apo AII was inferred from the cDNA sequence to be a 100 amino acid polypeptide consisting of the 77 residue mature protein and an additional 23 amino terminal residues. The amino terminal extension, divisible into an 18 residue signal peptide and a 5 residue propeptide, is separated from the first amino acid of mature apo AII by dibasic residues. The 5' untranslated region of the message is 61 bases in length and the 3' untranslated region 113 bases. A polyadenylation signal is situated 14 bases 3' of the poly(A) tail.     

The nature of information, required for export and sorting, present within the outer membrane protein OmpA of Escherichia coli K-12.

Information, in addition to that provided by signal sequences, for translocation across the plasma membrane is thought to be present in exported proteins of Escherichia coli. Such information must also exist for the localization of such proteins. To determine the nature of this information, overlapping inframe deletions have been constructed in the ompA gene which codes for a 325-residue major outer membrane protein. In addition, one deletion, encoding only the NH2-terminal part of the protein up to residue 160, was prepared. The location of each product was determined by immunoelectron microscopy. Proteins missing residues 4-45, 43-84, 46-227, 86-227 or 160-325 of the mature protein were all efficiently translocated across the plasma membrane. The first two proteins were found in the outer membrane, the others in the periplasmic space. It has been proposed that export and sorting signals consist of relatively small amino acid sequences near the NH2 terminus of an outer membrane protein. On the basis of sequence homologies it has also been suggested that such proteins possess a common sorting signal. The locations of the partially deleted proteins described here show that a unique export signal does not exist in the OmpA protein. The proposed common sorting signal spans residues 1-14 of OmpA. Since this region is not essential for routing the protein, the existence of a common sorting signal is doubtful. It is suggested that information both for export (if existent) and localization lies within protein conformation which for the former process should be present repeatedly in the polypeptide.     

A novel family of antimicrobial peptides from the skin of Amolops loloensis

While conducting experiments to investigate antimicrobial peptides of amphibians living in the Yunnan-Sichuan region of southwest China, a new family of antimicrobial peptides was identified from skin secretions of the rufous-spotted torrent frog, Amolops loloensis. Members of the new peptide family named amolopins are composed of 18 amino acids with a unique sequence, for example, NILSSIVNGINRALSFFG. By BLAST search, amolopins did no show similarity to any known peptides. Among the tested microorganisms, native and synthetic peptides only showed antimicrobial activities against Staphylococcus aureus ATCC2592 and Bacillus pumilus, no effects on other microorganisms. The CD spectroscopy showed that it adopted a structure of random combined with beta-sheet in water, Tris-HCl or Tris-HCl-SDS. Several cDNAs encoding amolopins were cloned from the skin cDNA library of A. loloensis. The precursors of amolopin are composed of 62 amino acid residues including predicted signal peptides, acidic propieces, and mature antimicrobial peptides. The preproregion of amolopin precursor comprises a hydrophobic signal peptide of 22 residues followed by an 18 residue acidic propiece which terminates by a typical prohormone processing signal Lys-Arg. The preproregions of precursors are very similar to other amphibian antimicrobial peptide precursors but the mature amolopins are different from other antimicrobial peptide families. The remarkable similarity of preproregions of precursors that give rise to very different antimicrobial peptides in distantly related frog species suggests that the corresponding genes form a multigene family originating from a common ancestor.     

An artificial hydrophobic sequence functions as either an anchor or a signal sequence at only one of two positions within the Escherichia coli outer membrane protein OmpA

The 325-residue outer membrane protein, OmpA, of Escherichia coli, like most other outer membrane proteins with known sequence, contains no long stretch of hydrophobic amino acids. A synthetic oligonucleotide, encoding the sequence Leu-Ala-Leu-Val, was inserted four times between the codons for amino acid residues 153 and 154 and two, three, or four times between the codons for residues 228 and 229, resulting in the OmpA153-4, OmpA-228-2, -3, and -4 proteins, respectively. In the first case, the lipophilic sequence anchored the protein in the plasma membrane. In the OmpA228 proteins, 16 but not 12 or 8 lipophilic residues most likely also acted as an anchor. By removal of the NH2-terminal signal peptide, the function of the insert in OmpA153-4 was converted to that of a signal-anchor sequence. Possibly due to differences in amino acid sequences surrounding the insert, no signal function was observed with the insert in OmpA228-4. Production of the OmpA153-4 protein, with or without the NH2-terminal signal sequence, resulted in a block of export of chromosomally encoded OmpA. Clearly, long hydrophobic regions are not permitted within proteins destined for the bacterial outer membrane, and these proteins, therefore, have had to evolve another mechanism of membrane assembly.