Complete recombinant silk-elastinlike protein-based tissue scaffold

Due to their improved biocompatibility and specificity over synthetic materials, protein-based biomaterials, either derived from natural sources or genetically engineered, have been widely fabricated into nanofibrous scaffolds for tissue engineering applications. However, their inferior mechanical properties often require the reinforcement of protein-based tissue scaffolds using synthetic polymers. In this study, we report the electrospinning of a completely recombinant silk-elastinlike protein-based tissue scaffold with excellent mechanical properties and biocompatibility. In particular, SELP-47K containing tandemly repeated polypeptide sequences derived from native silk and elastin was electrospun into nanofibrous scaffolds, and stabilized via chemical vapor treatment and mechanical preconditioning. When fully hydrated in 1× PBS at 37 °C, mechanically preconditioned SELP-47K scaffolds displayed elastic moduli of 3.4-13.2 MPa, ultimate tensile strengths of 5.7-13.5 MPa, deformabilities of 100-130% strain, and resilience of 80.6-86.9%, closely matching or exceeding those of protein-synthetic blend polymeric scaffolds. Additionally, SELP-47K nanofibrous scaffolds promoted cell attachment and growth, demonstrating their in vitro biocompatibility.     

Evaluation of Biological Properties of Electron Beam Melted Ti6Al4V Implant with Biomimetic Coating In Vitro and In Vivo

Background

High strength porous titanium implants are widely used for the reconstruction of craniofacial defects because of their similar mechanical properties to those of bone. The recent introduction of electron beam melting (EBM) technique allows a direct digitally enabled fabrication of patient specific porous titanium implants, whereas both their in vitro and in vivo biological performance need further investigation.

Methods

In the present study, we fabricated porous Ti6Al4V implants with controlled porous structure by EBM process, analyzed their mechanical properties, and conducted the surface modification with biomimetic approach. The bioactivities of EBM porous titanium in vitro and in vivo were evaluated between implants with and without biomimetic apatite coating.

Results

The physical property of the porous implants, containing the compressive strength being 163 - 286 MPa and the Young’s modulus being 14.5–38.5 GPa, is similar to cortical bone. The in vitro culture of osteoblasts on the porous Ti6Al4V implants has shown a favorable circumstance for cell attachment and proliferation as well as cell morphology and spreading, which were comparable with the implants coating with bone-like apatite. In vivo, histological analysis has obtained a rapid ingrowth of bone tissue from calvarial margins toward the center of bone defect in 12 weeks. We observed similar increasing rate of bone ingrowth and percentage of bone formation within coated and uncoated implants, all of which achieved a successful bridging of the defect in 12 weeks after the implantation.

Conclusions

This study demonstrated that the EBM porous Ti6Al4V implant not only reduced the stress-shielding but also exerted appropriate osteoconductive properties, as well as the apatite coated group. The results opened up the possibility of using purely porous titanium alloy scaffolds to reconstruct specific bone defects in the maxillofacial and orthopedic fields.     

医用多孔钛的研究进展

钛及钛合金由于其优良的抗腐蚀性、生物相容性、低密度和高强度等特点，已广泛应用于承力部位的骨修复，但是如何促进 植入体与骨组织界面的有效结合仍是技术瓶颈，一方面由于植入体的弹性模量与骨组织不匹配，由此产生的应力屏蔽易导致植 入体松动，另一方面植入体缺乏骨诱导作用，导致材料骨界面之间不能形成有效的生物化学结合。近来，具有表面优化处理的新 型生物医用多孔钛材料通过引入孔隙的方法，使其与骨组织的力学性能相匹配，并且应用活化改性技术，使其具有生物活性，成 为目前骨替代材料的研究热点和发展方向。本文简要总结了多孔钛材料在力学性能、生物相容性、制备方法和表面改性等方面的 研究进展，强调在保证其多孔优势性能的前提下，通过生物活性因子的引入，进一步改善其生物相容性，提高结合力，延长植入体 的寿命，使其具有诱导成骨功能，是新型多孔钛材料的发展趋势。     

Biomaterials

Biomaterials--materials used for the elaboration of systems designed for human implantation or organ substitutes--can be classified as metals and alloys, ceramics and polymers. Their uses are largely diversified, for soft and hard tissues replacement. Interactions rise between biological environment and implants, the mechanisms of them not always known: inflammatory response, corrosion and degradation of materials leading to leaching of some constituents possibly toxic and alteration of their mechanical properties. Blood interfacing materials introduce some particular problems of hemocompatibility. The matching of implant to biological medium, in other words, its biocompatibility has to be a priori evaluated, but until now no in vitro or in vivo evaluation method is fully reliable.     

Characterization of Mechanical and Biological Properties of 3-D Scaffolds Reinforced with Zinc Oxide for Bone Tissue Engineering

A scaffold for bone tissue engineering should have highly interconnected porous structure, appropriate mechanical and biological properties. In this work, we fabricated well-interconnected porous β-tricalcium phosphate (β-TCP) scaffolds via selective laser sintering (SLS). We found that the mechanical and biological properties of the scaffolds were improved by doping of zinc oxide (ZnO). Our data showed that the fracture toughness increased from 1.09 to 1.40 MPam^1/2, and the compressive strength increased from 3.01 to 17.89 MPa when the content of ZnO increased from 0 to 2.5 wt%. It is hypothesized that the increase of ZnO would lead to a reduction in grain size and an increase in density of the strut. However, the fracture toughness and compressive strength decreased with further increasing of ZnO content, which may be due to the sharp increase in grain size. The biocompatibility of the scaffolds was investigated by analyzing the adhesion and the morphology of human osteoblast-like MG-63 cells cultured on the surfaces of the scaffolds. The scaffolds exhibited better and better ability to support cell attachment and proliferation when the content of ZnO increased from 0 to 2.5 wt%. Moreover, a bone like apatite layer formed on the surfaces of the scaffolds after incubation in simulated body fluid (SBF), indicating an ability of osteoinduction and osteoconduction. In summary, interconnected porous β-TCP scaffolds doped with ZnO were successfully fabricated and revealed good mechanical and biological properties, which may be used for bone repair and replacement potentially.     

Bioresorbable Scaffolds Based on Fibroin for Bone Tissue Regeneration

Using the tissue-engineered constructs based on scaffolds that imitate the extracellular matrix of living tissues unveils new opportunities in the treatment of various pathologies and injuries associated with tissue and organ damage. Silk fibroin of silkworm Bombyx mori is a biocompatible and bioresorbable polymer with high mechanical strength and elasticity that allows creating scaffolds on its basis for regeneration of various tissues, including bone. In the present work, fibroin scaffolds were obtained. They were designed in the form of porous sponges, films, and hybrid scaffolds of a bilayer structure in which the porous sponge threedimensional structure is limited on one side by a film. The structure of the scaffolds and their biocompatibility were studied: immortalized and primary fibroblasts, as well as the osteoblast-like cells, have been shown to successfully adhere and proliferate on the surface of the studied scaffolds. Numerous osteogenesis foci have been observed in the implant region 4 weeks after the fibroin porous scaffold implantation in the in vivo experiments in a rat femoral bone defect model indicating the osteoconduction of the scaffolds.     

A porous medium‐chain‐length poly(3‐hydroxyalkanoates)/hydroxyapatite composite as scaffold for bone tissue engineering

Polyhydroxyalkanoates (PHA) are hydrophobic biopolymers with huge potential for biomedical applications due to their biocompatibility, excellent mechanical properties and biodegradability. A porous composite scaffold made of medium‐chain‐length poly(3‐hydroxyalkanoates) (mcl‐PHA) and hydroxyapatite (HA) was fabricated using particulate leaching technique and NaCl as a porogen. Different percentages of HA loading was investigated that would support the growth of osteoblast cells. Ultrasonic irradiation was applied to facilitate the dispersion of HA particles into the mcl‐PHA matrix. The different P(3HO‐co‐3HHX)/HA composites were investigated using field emission scanning electron microscopy (FESEM), X‐ray diffraction (XRD) and energy dispersive X‐ray analysis (EDXA). The scaffolds were found to be highly porous with interconnecting pore structures and the HA particles were homogeneously dispersed in the polymer matrix. The scaffolds biocompatibility and osteoconductivity were also assessed following the proliferation and differentiation of osteoblast cells on the scaffolds. From the results, it is clear that scaffolds made from P(3HO‐co‐3HHX)/HA composites are viable candidate materials for bone tissue engineering applications.     

Development of biodegradable scaffolds based on patient-specific arterial configuration

Biodegradable scaffolds are of great value in tissue engineering. We have developed a method for fabricating patient-specific vascular scaffolds from a biocompatible and biodegradable polymer, poly(L-lactide-co-epsilon-caprolactone). This method's usefulness is due to flexibility in the choice of materials and vascular configurations. Here, we present a way to fabricate scaffolds of human carotid artery by combining processes of rapid prototyping, lost wax, dip coating, selective dissolution, and salt leaching. The result was the successful development of porous biodegradable scaffolds, with mechanical strength covering the range of human blood vessels (1-3 MPa). Human umbilical vein endothelial cells were also cultured on the scaffolds and their biocompatibility was confirmed by cell growth. The Young's modulus of scaffolds could be controlled by changing polymer concentration and porosity. The wall thickness of the tubular scaffold was also controllable by adjusting polymer concentration and pull-up velocity during dip coating. We believe that this fabrication technique can be applied to patient-specific regeneration of blood vessels.     

钛及钛合金种植体表面处理的研究进展

钛的优良特性早已被公认为首选牙用种植材料,其表面氧化膜是形成骨结合的关建。为了进一步增加其耐腐蚀性和生物相容性,人们采取了多种方式进行表面处理,最终达到在植入体的不同部位产生不同的粗糙表面,以利于不同细胞在不同地方的附着,增加其生物活性。同时,达到避免各种污染物对纯钛种植体影响的目的。近年来钛种植体材料表面处理已经成为研究热点,本文就表面处理的方法进行综述。     

The effects of different crossing-linking conditions of genipin on type I collagen scaffolds: an in vitro evaluation

The purpose of this paper is to analyze the properties of fabricating rat tail type I collagen scaffolds cross-linked with genipin under different conditions. The porous genipin cross-linked scaffolds are obtained through a two step freeze-drying process. To find out the optimal cross-link condition, we used different genipin concentrations and various cross-linked temperatures to prepare the scaffolds in this study. The morphologies of the scaffolds were characterized by scanning electron microscope, and the mechanical properties of the scaffolds were evaluated under dynamic compression. Additionally, the cross-linking degree was assessed by ninhydrin assay. To investigate the swelling ratio and the in vitro degradation of the collagen scaffold, the tests were also carried out by immersion of the scaffolds in a PBS solution or digestion in a type I collagenase respectively. The morphologies of the non-cross-linked scaffolds presented a lattice-like structure while the cross-linked ones displayed a sheet-like framework. The morphology of the genipin cross-linked scaffolds could be significantly changed by either increasing genipin concentration or the temperature. The swelling ratio of each cross-linked scaffold was much lower than that of the control (non-cross-linked).The ninhydrin assay demonstrated that the higher temperature and genipin concentration could obviously increase the cross-linking efficiency. The in vitro degradation studies indicated that genipin cross-linking can effectively elevate the biostability of the scaffolds. The biocompatibility and cytotoxicity of the scaffolds was evaluated by culturing rat chondrocytes on the scaffold in vitro and by MTT. The results of MTT and the fact that the chondrocytes adhered well to the scaffolds demonstrated that genipin cross-linked scaffolds possessed an excellent biocompatibility and low cytotoxicity. Based on these results, 0.3 % genipin concentrations and 37 °C cross-linked temperatures are recommended.     

Tissue engineered scaffold utilizing the reinforced technique

Various types of biomaterials have been developed and utilized for the repair of damaged tissue and organs and the biocompatibility of these materials is of major concern. Tissue engineered scaffolds should provide adequate mechanical strength during the initial healing state, and the highly porous structure should provide an ideal environment for the migration and proliferation of cells; additionally, during surgical operations, the scaffolds should be able to be handled and sutured. Therefore, many researchers have designed reinforced scaffolds so as to address these issues. The structures described can be applied to the development of artificial ligaments, tendons, skin, bones, cartilage, and trachea.     

Fabrication of gelatin-hyaluronic acid hybrid scaffolds with tunable porous structures for soft tissue engineering

The development of three-dimensional (3-D) scaffolds with highly open porous structure is one of the most important issues in tissue engineering. In this study, 3-D macroporous gelatin/hyaluronic acid (GE/HA) hybrid scaffolds with varying porous morphology were prepared by freeze-drying their blending solutions and subsequent chemical crosslinking by using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). The resulting scaffolds were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Their swelling, in vitro degradation properties and compressive strength were also investigated. To evaluate in vitro cytocompatibility of scaffolds, mouse L929 fibroblasts were seeded onto the scaffolds for cell morphology and cell viability studies. It was found that the porous structure of scaffolds can be tailored by varying the ratios of gelatin to HA, both the swelling ratios and degradation rate increased with the increase of HA content in hybrid scaffolds, and crosslinking the scaffolds with EDC improved the degradation resistance of the scaffold in culture media and increased the mechanical strength of scaffolds. The in vitro results revealed that the prepared scaffolds do not induce cytotoxic effects and suitable for cell growth, especially in the case of scaffolds with higher gelatin content. The combined results of the physicochemical and biological studies suggested that the developed GE/HA hybrid scaffolds exhibit good potential and biocompatibility for soft tissue engineering applications.     

Porous Tantalum Coatings Prepared by Vacuum Plasma Spraying Enhance BMSCs Osteogenic Differentiation and Bone Regeneration In Vitro and In Vivo

Tantalum, as a potential metallic implant biomaterial, is attracting more and more attention because of its excellent anticorrosion and biocompatibility. However, its significantly high elastic modulus and large mechanical incompatibility with bone tissue make it unsuitable for load-bearing implants. In this study, porous tantalum coatings were first successfully fabricated on titanium substrates by vacuum plasma spraying (VPS), which would exert the excellent biocompatibility of tantalum and alleviate the elastic modulus of tantalum for bone tissue. We evaluated cytocompatibility and osteogenesis activity of the porous tantalum coatings using human bone marrow stromal cells (hBMSCs) and its ability to repair rabbit femur bone defects. The morphology and actin cytoskeletons of hBMSCs were observed via electron microscopy and confocal, and the cell viability, proliferation and osteogenic differentiation potential of hBMSCs were examined quantitatively by PrestoBlue assay, Ki67 immunofluorescence assay, real-time PCR technology and ALP staining. For in vivo detection, the repaired femur were evaluated by histomorphology and double fluorescence labeling 3 months postoperation. Porous tantalum coating surfaces promoted hBMSCs adhesion, proliferation, osteogenesis activity and had better osseointegration and faster new bone formation rate than titanium coating control. Our observation suggested that the porous tantalum coatings had good biocompatibility and could enhance osseoinductivity in vitro and promote new bone formation in vivo. The porous tantalum coatings prepared by VPS is a promising strategy for bone regeneration.     

Engineering vascularized skeletal muscle tissue

One of the major obstacles in engineering thick, complex tissues such as muscle is the need to vascularize the tissue in vitro. Vascularization in vitro could maintain cell viability during tissue growth, induce structural organization and promote vascularization upon implantation. Here we describe the induction of endothelial vessel networks in engineered skeletal muscle tissue constructs using a three-dimensional multiculture system consisting of myoblasts, embryonic fibroblasts and endothelial cells coseeded on highly porous, biodegradable polymer scaffolds. Analysis of the conditions for induction and stabilization of the vessels in vitro showed that addition of embryonic fibroblasts increased the levels of vascular endothelial growth factor expression in the construct and promoted formation and stabilization of the endothelial vessels. We studied the survival and vascularization of the engineered muscle implants in vivo in three different models. Prevascularization improved the vascularization, blood perfusion and survival of the muscle tissue constructs after transplantation.     

Recent advances in bone tissue engineering scaffolds

Bone disorders are of significant concern due to increase in the median age of our population. Traditionally, bone grafts have been used to restore damaged bone. Synthetic biomaterials are now being used as bone graft substitutes. These biomaterials were initially selected for structural restoration based on their biomechanical properties. Later scaffolds were engineered to be bioactive or bioresorbable to enhance tissue growth. Now scaffolds are designed to induce bone formation and vascularization. These scaffolds are often porous, made of biodegradable materials that harbor different growth factors, drugs, genes, or stem cells. In this review, we highlight recent advances in bone scaffolds and discuss aspects that still need to be improved.     

A bioactive collagen-β tricalcium phosphate scaffold for tissue engineering

Collagen-phosphate composites (COL/β-TCP) are novel materials that have the potential to be used as bone analogues. The aim of our study was to develop a porous bioactive material composed of type I collagen, the main bone protein and tricalcium phosphate, the mineral phase of natural bone, and investigate their in vitro biocompatibility in a human dermal fibroblast culture system. In order to obtain the bioactive materials, type I collagen was isolated from bovine tendon and characterized by physicochemical methods. β-TCP was obtained from calcium carbonate by thermal decomposition at 900 °C temperature. The powder was examined with X-ray diffraction. Two variants of COL/β-TCP scaffolds (P1 and P2) were prepared and examined by scanning electron microscopy. Our results revealed a microporous structure with small white aggregates of β-TCP, non-homogenous scattered in the collagen framework without any preferential orientation. The biocompatibility of the obtained scaffolds was tested by biochemical and histological methods on human fibroblast cultures. Both materials acted as good subtrates for human dermal fibroblast proliferation and migration.     

Enhanced bioelectrochemical performance caused by porous metal-organic framework MIL-53(Fe) as the catalyst in microbial fuel cells

To enhance the oxygen reduction reaction (ORR) activity and power generation capacity of a microbial fuel cell (MFC), MIL-53(Fe) (Fe-based Materials of Institute Lavoisier) as the electrochemical catalyst was synthesized using the hydrothermal method. The catalytic structure and morphology of all materials were comprehensively characterized by Fourier Transform infrared spectrometer (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). The results show that there were many nanopores on MIL-53(Fe), which improved the electrocatalytic activity. The MIL-53(Fe)-modified air cathode MFC had a voltage output of approximately 0.37 V and maintained that output for one week. The maximum power density was 397 ± 6.3 mW/m². MIL-53(Fe) was an excellent electrochemical catalyst, significantly enhancing the catalytic oxygen reduction ability and promoting the power output of the MFC. This study provides a method to apply MIL-53(Fe) materials in microbial fuel cells.     

Potential Use of Porous Titanium–Niobium Alloy in Orthopedic Implants: Preparation and Experimental Study of Its Biocompatibility In Vitro

Background

The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range between the bone and prosthesis are important for long-term stability of artificial joints. They are the focus of research on uncemented artificial joints. Porous materials can be of potential use to solve these problems.

Objectives/Purposes

This research aims to observe the characteristics of the new porous Ti-25Nb alloy and its biocompatibility in vitro, and to provide basic experimental evidence for the development of new porous prostheses or bone implants for bone tissue regeneration.

Methods

The Ti-25Nb alloys with different porosities were fabricated using powder metallurgy. The alloys were then evaluated based on several characteristics, such as mechanical properties, purity, pore size, and porosity. To evaluate biocompatibility, the specimens were subjected to methylthiazol tetrazolium (MTT) colorimetric assay, cell adhesion and proliferation assay using acridine staining, scanning electron microscopy, and detection of inflammation factor interleukin-6 (IL-6).

Results

The porous Ti-25Nb alloy with interconnected pores had a pore size of 200 µm to 500 µm, which was favorable for bone ingrowth. The compressive strength of the alloy was similar to that of cortical bone, while with the elastic modulus closer to cancellous bone. MTT assay showed that the alloy had no adverse reaction to rabbit bone marrow mesenchymal stem cells, with a toxicity level of 0 to 1. Cell adhesion and proliferation experiments showed excellent cell growth on the surface and inside the pores of the alloy. According to the IL-6 levels, the alloy did not cause any obvious inflammatory response.

Conclusion

All porous Ti-25Nb alloys showed good biocompatibility regardless of the percentage of porosity. The basic requirement of clinical orthopedic implants was satisfied, which made the alloy a good prospect for biomedical application. The alloy with 70% porosity had the optimum mechanical properties, as well as suitable pore size and porosity, which allowed more bone ingrowth.     

Biological properties of solid free form designed ceramic scaffolds with BMP-2: in vitro and in vivo evaluation

Porous ceramic scaffolds are widely studied in the tissue engineering field due to their potential in medical applications as bone substitutes or as bone-filling materials. Solid free form (SFF) fabrication methods allow fabrication of ceramic scaffolds with fully controlled pore architecture, which opens new perspectives in bone tissue regeneration materials. However, little experimentation has been performed about real biological properties and possible applications of SFF designed 3D ceramic scaffolds. Thus, here the biological properties of a specific SFF scaffold are evaluated first, both in vitro and in vivo, and later scaffolds are also implanted in pig maxillary defect, which is a model for a possible application in maxillofacial surgery. In vitro results show good biocompatibility of the scaffolds, promoting cell ingrowth. In vivo results indicate that material on its own conducts surrounding tissue and allow cell ingrowth, thanks to the designed pore size. Additional osteoinductive properties were obtained with BMP-2, which was loaded on scaffolds, and optimal bone formation was observed in pig implantation model. Collectively, data show that SFF scaffolds have real application possibilities for bone tissue engineering purposes, with the main advantage of being fully customizable 3D structures.     

MC 3T3-E1细胞在纳米羟基磷灰石/壳聚糖复合支架上的增殖和分化

用原位合成纳米羟基磷灰石的方法制备多孔纳米羟基磷灰石/壳聚糖复合支架;在支架上接种MC 3T3-E1细胞,瑞氏染色检测细胞形态,MTT法检测其增殖情况;在诱导培养基中培养30d后,碱性磷酸酶染色比较其分化水平;定量检测细胞的碱性磷酸酶活性;RT-PCR检测成骨相关基因的表达情况。实验结果表明：MC 3T3-E1细胞在纳米级羟基磷灰石/壳聚糖复合支架上粘附铺展良好,其增殖率显著高于培养于纯壳聚糖支架上的细胞。碱性磷酸酶染色表明复合支架上的细胞有较高水平的碱性磷酸酶表达。进一步定量检测细胞的碱性磷酸酶活性,结果说明在复合支架上细胞比纯壳聚糖支架上培养的细胞碱性磷酸酶活性提高了约8倍。此外,骨分化相关特征基因骨桥蛋白OPN在复合支架上培养的细胞中的表达水平也明显高于纯壳聚糖上培养的细胞。分化成熟标志基因骨钙素OC在复合支架上培养的细胞中有表达,但是纯壳聚糖支架上培养的细胞中却未检测到。支架中纳米羟基磷灰石的加入不仅提高了前成骨细胞在复合支架上的增殖,而且还促进了它的分化。纳米羟基磷灰石/壳聚糖复合支架表现出良好的生物相容性和生物活性,是极具前景的骨组织工程支架材料。