Direct sequencing of PCR products using the Maxam-Gilbert method

Direct sequencing of polymerase chain reaction (PCR) products by using the Maxam-Gilbert method is described. In this method, one of the primers is end labeled. Thus it is possible to sequence the reaction product directly following purification using this chemical method.     

Apolipoprotein B(Arg3500----Gln) allele specific polymerase chain reaction: large-scale screening of pooled blood samples.

A two-step polymerase chain reaction (PCR) method for the rapid detection of the apolipoprotein B(Arg3500----Gln) mutation in a mixture of pooled blood samples is described. In the first step PCR, a short gene fragment surrounding codon 3500 is amplified. Subsequently the reaction product is subjected to a second amplification in which a mutation-specific primer is used. A PCR product is generated only if the mutant sequence is present in the DNA pool. Individuals carrying the mutation can then be identified by PCR with mutagenic primers and MspI restriction typing, essentially as described by Hansen et al. (J. Lipid Res. 1991. 32: 1229-1233).     

A modified overlap extension PCR method to create chimeric genes in the absence of restriction enzymes

A modified overlap extension technique for the creation of chimeric genes is described: the method consists in three PCR steps. The first step is a conventional PCR reaction, in which oligonucleotide primers are partially complementary at their 5' ends to the adjacent fragments that are fused to create the chimer. The second PCR step consists in the fusion of the PCR fragments generated in the first step using the complementary extremities of the primers. The third step corresponds to the PCR amplification of the fusion product. The final PCR product is a chimeric gene built up with the different amplified PCR fragments. The technique is illustrated by the construction of a chimeric 5- hydroxytryptamine (5-HT, serotonin)1B/D receptor by combining one part of the human 5-HT1B (h5-HT1B) and two parts of the h5-HT1D receptor gene. The chimeric gene expressed in Cos-7 cells yielded similar binding properties as the wild type h5-HT1D receptor. © Rapid Science Ltd. 1998     

Single base pair mutation analysis by PNA directed PCR clamping.

A novel method that allows direct analysis of single base mutation by the polymerase chain reaction (PCR) is described. The method utilizes the finding that PNAs (peptide nucleic acids) recognize and bind to their complementary nucleic acid sequences with higher thermal stability and specificity than the corresponding deoxyribooligonucleotides and that they cannot function as primers for DNA polymerases. We show that a PNA/DNA complex can effectively block the formation of a PCR product when the PNA is targeted against one of the PCR primer sites. Furthermore, we demonstrate that this blockage allows selective amplification/suppression of target sequences that differ by only one base pair. Finally we show that PNAs can be designed in such a way that blockage can be accomplished when the PNA target sequence is located between the PCR primers.     

A closed tube format for amplification and detection of DNA based on energy transfer.

A new method for the direct detection of PCR-amplified DNA in a closed system is described. The method is based on the incorporation of energy transfer-labeled primers into the amplification product. The PCR primers contain hairpin structures on their 5'ends with donor and acceptor moieties located in close proximity on the hairpin stem. The primers are designed in such a way that a fluorescent signal is generated only when the primers are incorporated into an amplification product. A signal to background ratio of 35:1 was obtained using the hairpin primers labeled with fluorescein as a donor and 4-(4'-dimethylaminophenylazo) benzoic acid (DABCYL) as a quencher. The modified hairpin-primers do not interfere with the activity of DNA polymerase, and both thermostable Pfu and Taq polymerase can be used. This method was applied to the detection of cDNA for prostate specific antigen. The results demonstrate that the fluorescent intensity of the amplified product correlates with the amount of incorporated primers, and as few as 10 molecules of the initial template can be detected. This technology eliminates the risk of carry-over contamination, simplifies the amplification assay and opens up new possibilities for the real-time quantification of the amplified DNA over an extremely wide dynamic range.     

Detection of Listeria species and Listeria monocytogenes using polymerase chain reaction

Five oligonucleotide sequences are described that were used as primers in the polymerase chain reaction (PCR) to amplify specific sequences from Listeria DNA. When all five primers were used in combination, three PCR products were possible; a Listeria specific product that occurs with DNA from any Listeria sp., a Listeria monocytogenes specific product that occurs only in the presence of DNA from this organism and a universal product that is found using DNA from any bacterial source. The occurrence of these PCR products was used as a diagnostic test on bacteria isolated from various food samples to detect Listeria sp. and L. monocytogenes.     

Multiplex quantitative PCR using self-quenched primers labeled with a single fluorophore

Multiplex quantitative PCR based on novel design of fluorescent primers is described. Fluorogenic primers are labeled with a single fluorophore on a base close to the 3′ end with no quencher required. A tail of 5–7 nt is added to the 5′ end of the primer to form a blunt-end hairpin when the primer is not incorporated into a PCR product. This design provides a low initial fluorescence of the primers that increases up to 8-fold upon formation of the PCR product. The hairpin oligonucleotides (ΔG from –1.6 to –5.8 kcal/mol) may be as efficient as linear primers and provide additional specificity to the PCR by preventing primer-dimers and mispriming. Multiple fluorogenic primers were designed by specialized software and used for real-time quantitation of c-myc and IL-4 cDNAs in the presence of reference genes such as β-actin, GAPDH and 18S rRNA. Targets of 10–10⁷ copies were detected with precision in PCR using FAM-labeled primers for variable genes and JOE-labeled primers for the reference genes. This method was also used to detect single nucleotide polymorphism of the human retinal degeneration gene by allele-specific PCR with end-point detection using a fluorescent plate reader or a UV-transilluminator. We conclude that fluorogenic mono-labeled primers are an efficient and cost-effective alternative to FRET-labeled oligonucleotides.     

Specific PCR primers directed to identify cryI and cryIII genes within a Bacillus thuringiensis strain collection.

In this paper we describe a PCR strategy that can be used to rapidly identify Bacillus thuringiensis strains that harbor any of the known cryI or cryIII genes. Four general PCR primers which amplify DNA fragments from the known cryI or cryIII genes were selected from conserved regions. Once a strain was identified as an organism that contains a particular type of cry gene, it could be easily characterized by performing additional PCR with specific cryI and cryIII primers selected from variable regions. The method described in this paper can be used to identify the 10 different cryI genes and the five different cryIII genes. One feature of this screening method is that each cry gene is expected to produce a PCR product having a precise molecular weight. The genes which produce PCR products having different sizes probably represent strains that harbor a potentially novel cry gene. Finally, we present evidence that novel crystal genes can be identified by the method described in this paper.     

Detection of hepatopancreatic parvovirus in Thai shrimp Penaeus monodon by in situ hybridization,dot blot hybridization and PCR amplification

Hepatopancreatic parvovirus (HPV) infects the hepatopancreas in penaeid shrimp and retards their growth. The DNA sequence of HPV from Thai shrimp Penaeus monodon (HPVmon) differs from HPV of Penaeus chinensis (HPVchin) by approximately 30%. In spite of this difference, commercial PCR primers (DiagXotics) developed from HPVchin to yield a 350 bp PCR product do give a 732 bp product with HPVmon DNA template. On the other hand, the sensitivity of HPVmon detection with these primers and with hybridization probes designed for HPVchin is significantly lower than it is with HPVchin. To improve sensitivity for HPVmon detection, we used the sequence of the 732 bp HPVmon PCR amplicon described above to develop specific PCR primers (H441F and H441R) and hybridization probe. The primers could detect as little as 1 fg of purified HPVmon DNA while the 441 bp digoxygenin-labeled PCR product gave strong, specific reactions with in situ hybridization and with hybridization blots. In contrast, negative results were obtained using DNA from all other pathogens tested and from DNA of P. monodon. Supernatant solution from boiled, fresh shrimp fecal and postlarval samples homogenized in 0.025% NaOH/0.0125% SDS could be used to detect as little as 0.1 pg HPVmon DNA by the PCR reaction. By dot blot hybridization, a visible signal was obtained with purified HPVmon DNA at 0.01 pg, but detection in spiked feces and postlarval samples was only 1 and 0.1 pg, respectively.     

Rapid and sensitive method for detection of Shiga-like toxin-producing Escherichia coli in ground beef using the polymerase chain reaction.

A rapid and sensitive method for detection of Shiga-like toxin (SLT)-producing Escherichia coli (SLT-EC) with the polymerase chain reaction (PCR) is described. Two pairs of oligonucleotide primers homologous to SLTI and SLTII genes, respectively, were used in multiplex PCR assays. The first pair generated a ca. 600-bp PCR product with DNA from all SLTI-producing E. coli tested but not from E. coli strains that produce SLTII or variants of SLTII. The second pair generated a ca. 800-bp PCR product with DNA from E. coli strains that produce SLTII or variants of SLTII but not from SLTI-producing E. coli. When used in combination, the SLTI and SLTII oligonucleotide primers amplified DNA from all of the SLT-EC tested. No PCR products were obtained with SLT primers with DNA from 28 E. coli strains that do not produce SLT or 44 strains of 28 other bacterial species. When ground beef samples were inoculated with SLT-EC strains 319 (O157:H7; SLTI and SLTII), H30 (O26:H11; SLTI), and B2F1/3 (O91:H21; SLTII variants VT2ha and VT2hb) and cultured in modified Trypticase soy broth for 6 h at 42 degrees C, an initial sample inoculum of as few as 1 CFU of these SLT-EC strains per g could be detected in PCR assays with DNA extracted from the broth cultures.     

Rapid and sensitive method for detection of Shiga-like toxin-producing Escherichia coli in ground beef using the polymerase chain reaction.

A rapid and sensitive method for detection of Shiga-like toxin (SLT)-producing Escherichia coli (SLT-EC) with the polymerase chain reaction (PCR) is described. Two pairs of oligonucleotide primers homologous to SLTI and SLTII genes, respectively, were used in multiplex PCR assays. The first pair generated a ca. 600-bp PCR product with DNA from all SLTI-producing E. coli tested but not from E. coli strains that produce SLTII or variants of SLTII. The second pair generated a ca. 800-bp PCR product with DNA from E. coli strains that produce SLTII or variants of SLTII but not from SLTI-producing E. coli. When used in combination, the SLTI and SLTII oligonucleotide primers amplified DNA from all of the SLT-EC tested. No PCR products were obtained with SLT primers with DNA from 28 E. coli strains that do not produce SLT or 44 strains of 28 other bacterial species. When ground beef samples were inoculated with SLT-EC strains 319 (O157:H7; SLTI and SLTII), H30 (O26:H11; SLTI), and B2F1/3 (O91:H21; SLTII variants VT2ha and VT2hb) and cultured in modified Trypticase soy broth for 6 h at 42 degrees C, an initial sample inoculum of as few as 1 CFU of these SLT-EC strains per g could be detected in PCR assays with DNA extracted from the broth cultures.     

Use of sulfonated primers to detect and type papillomavirus in cell cultures and cervical biopsies.

Human papillomavirus (HPV) was detected by using two sets of deoxyribonucleotide primers for differentiating between 'low-risk' types (HPV11 and HPV6) and 'high-risk' (hri) types (HPV16, HPV18 and HPV33). A new application of the Chemiprobe method for labeling DNA was used to detect products of the polymerase chain reaction (PCR) from 36 cervical biopsies. This method, first demonstrated by Uchimura et al. (submitted), is based on the sulfonation of a polycytidylic acid tail of 5-20 monomers attached to the 5' end of either one or both of the PCR primers. This procedure can increase the sensitivity of detection of PCR products more than 100-fold with respect to ethidium bromide (EtdBr) staining. Various methods were used to detect hri HPV DNA in the 36 clinical samples. The number of positive results obtained was as follows, two by Southern-blot hybridization; five by PCR amplification followed by electrophoresis and detection of products by EtdBr staining; six by PCR amplification using one or two sulfonated C-tailed primers followed by electroblotting and immunoenzymatic visualization; and five by hybridization of sulfonated genomic viral recombinant with a PCR product immobilized on a membrane. The yield of the PCR product was significantly greater when one of the primers was C-tailed than when both or neither of the primers were C-tailed. PCR employing sulfonated C-tailed oligo primers is very specific and sensitive, and the entire procedure can be employed as a nonradioactive substitute for radioactive dot-blot or Southern-blot hybridization procedures, routinely used for detection of HPV in clinical samples.     

A simple ligation-based method to increase the information density in sequencing reactions used to deconvolute nucleic acid selections

Herein, a method is described to increase the information density of sequencing experiments used to deconvolute nucleic acid selections. The method is facile and should be applicable to any selection experiment. A critical feature of this method is the use of biotinylated primers to amplify and encode a BamHI restriction site on both ends of a PCR product. After amplification, the PCR reaction is captured onto streptavidin resin, washed, and digested directly on the resin. Resin-based digestion affords clean product that is devoid of partially digested products and unincorporated PCR primers. The product's complementary ends are annealed and ligated together with T4 DNA ligase. Analysis of ligation products shows formation of concatemers of different length and little detectable monomer. Sequencing results produced data that routinely contained three to four copies of the library. This method allows for more efficient formulation of structure-activity relationships since multiple active sequences are identified from a single clone.     

Haplosporidiosis in the Pacific oyster Crassostrea gigas from the French Atlantic coast

Two cases of haplosporidian infection occurred during 1993 in Pacific oysters Crassostrea gigas from the French Atlantic coast. The localization and ultrastructure of the plasmodia are described. In situ hybridization of infected tissue sections was conducted with DNA probes for oyster-infecting haplosporidians. The Haplosporidium nelsoni-specific DNA probe MSX1347 hybridized with the C. gigas parasite, and the H. costale-specific probe SSO1318 did not hybridize. Total genomic DNA was extracted from the infected tissue sections for polymerase chain reaction (PCR) amplification of the haplosporidian. PCR amplifications with H. nelsoni-specific primers and with 'universal' actin primers did not yield the expected products of 573 and 700 bp, respectively. A series of primers was designed to amplify short regions of small subunit ribosomal DNA (SSU rDNA) from most haplosporidians. The primers encompass a highly variable region of the SSU rDNA and did not amplify oyster DNA. PCR amplification of the infected C. gigas genomic DNA with these primers yielded the expected-sized product from the primer pair targeting the shortest region (94 bp). This PCR product was sequenced and it was identical to the corresponding SSU rDNA region of H. nelsoni.     

猴副流感病毒SV5的PCR检测方法建立及初步应用

[目的]建立检测SV5的PCR方法并加以初步应用。[方法]根据Genbank中报道的SV5序列,针对其中的SH基因设计引物进行PCR反应,扩增产物进行测序并用BLAST软件进行同源性比对,同时利用限制性内切酶的酶切反应以证实此PCR反应的特异性。在此基础上设计巢式PCR提高此方法的灵敏度。利用此方法对20份猴肾源细胞培养物和40份血清标本进行检测。[结果]利用设计的引物扩增出的序列测序结果证实与报道的SV5SH基因相对位置的序列一致。AccIII限制性内切酶可对PCR产物进行特异性酶切。巢式PCR比一次PCR的敏感度有所提高。用此方法检测的20份猴肾源细胞培养物和40份血清标本结果为阴性。[结论]本文首次初步建立了检测SV5病毒的PCR方法,排除实验室用20份猴肾源细胞培养物和40份血清标本SV5的污染。     

通过PCR进行长片段DNA的合成

利用PCR合成DNA长片段(Synthesis Large Frament DNA using PCR,SLFD PCR)是一种有效的合成长片段DNA的方法。采用一段已知的500～600bp碱基的DNA片段为PCR模板,根据所要合成的DNA序列可以设计一系列的PCR引物,这些引物都位于模板DNA的5’端,长度为50～60bp,且从5’到3’方向顺序重叠,重叠碱基数目为12～15,全部引物叠加所得到的DNA正是自己所要合成的DNA。这组引物中最3’端的一条含有一个BamH Ⅰ酶切位点,在该位点后面有15碱基与模板DNA5’端一致的序列。另外还设计一条与该模板匹配的下游引物,引物内也含有一个BamH Ⅰ酶切位点。首先采用5’端最右侧的引物与下游引物进行PCR,在PCR进行10个循环后,以此次PCR的产物为下一轮PCR的模板,该轮PCR采用右侧倒数第二个引物为上游引物,下游引物保持不变。采用类似的方法,完成所有的PCR循环,就可以得到所需要合成的DNA长片段。该方法尤其适合100～200碱基左右的长片段DNA的快速合成与克隆。     

A simple method for the preparation of single-stranded polydeoxynucleotides of desired length.

A method for the preparation of homogeneous, single-stranded polydeoxynucleotides of desired length up to 800 bases is described. The procedure entails 1) generation of double-stranded DNA of desired length by PCR using a pair of primers of which one is biotinylated and the other is either unlabeled or fluorescently labeled, 2) isolation of PCR products by agarose slab gel electrophoresis, 3) recovery of desired product by electroelution, 4) binding of the product to streptavidin-coated magnetic beads and is followed by 5) duplex denaturation and removal of the unbound single strand that is either unlabeled or fluorescently labeled. Final product characteristics were determined by capillary gel electrophoresis with fluorescence detection. Up to microgram quantities of homogeneous single-stranded DNA of a desired length were obtained. These can be used as single-stranded size standards in capillary gel electrophoresis experiments as well as in other techniques requiring such standards.     

Rapid isolation of flanking genomic DNA using biotin-RAGE, a variation of single-sided polymerase chain reaction.

A method is described for quickly and reproducibly isolating genomic DNA contiguous with known DNA sequence by means of the polymerase chain reaction (PCR). Flanking genomic DNA is isolated using a biotinylated sequence-specific primer in combination with a generic hybrid primer that binds to a deoxyoligonucleotide sequence artificially added to the ends of the genomic DNA. Amplified sequences that include the biotinylated primer are purified from nonbiotinylated amplification products by binding to a solid-phase streptavidin matrix. The biotinylated amplification product(s) are subjected to a further round of amplification, after which they can be subcloned and analyzed. This technique was applied to the isolation of three intron-exon junctions. Verification of the identify of these junction sequences was accomplished by designing primers based on the intron sequences isolated by Biotin-RAGE, amplifying across the exon using these intron primers, and sequencing the PCR-generated product.     

Cloning genomic sequences using long-range PCR

Protocols are presented for preparing DNA from a genomic library in λ phage and for synthesizing genomic fragments using PCR with nested vector- and gene-specific primers and linker-primers. Library DNA, isolated fromE. coli liquid lysates by a simple protocol, is used as template in PCR following a commercial protocol. The method produces library DNA sufficient for several hundred PCRs, incorporates nested primers to reduce nonspecific product formation, and enables the synthesis of linker-containing DNA fragments containing selected restriction sites to simplify subsequent cloning. The isolation of 5′ upstream sequences of three different arabidopsis genes by this methodod is described.