Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering

Tissue engineering is a multidisciplinary field of research in which the cells, biomaterials, and processes can be optimized to develop a tissue substitute. Three-dimensional (3D) architectural features from electrospun scaffolds, such as porosity, tortuosity, fiber diameter, pore size, and interconnectivity have a great impact on cell behavior. Regarding tissue development in vitro, culture conditions such as pH, osmolality, temperature, nutrient, and metabolite concentrations dictate cell viability inside the constructs. The effect of different electrospun scaffold properties, bioreactor designs, mesenchymal stem cell culture parameters, and seeding techniques on cell behavior can be studied individually or combined with phenomenological modeling techniques. This work reviews the main culture and scaffold factors that affect tissue development in vitro regarding the culture of cells inside 3D matrices. The mathematical modeling of the relationship between these factors and cell behavior inside 3D constructs has also been critically reviewed, focusing on mesenchymal stem cell culture in electrospun scaffolds.     

Electrospun poly(epsilon-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: characterization of scaffolds and measurement of cellular infiltration

The physical and spatial architectural geometries of electrospun scaffolds are important to their application in tissue engineering strategies. In this work, poly(epsilon-caprolactone) microfiber scaffolds with average fiber diameters ranging from 2 to 10 microm were individually electrospun to determine the parameters required for reproducibly fabricating scaffolds. As fiber diameter increased, the average pore size of the scaffolds, as measured by mercury porosimetry, increased (values ranging from 20 to 45 microm), while a constant porosity was observed. To capitalize on both the larger pore sizes of the microfiber layers and the nanoscale dimensions of the nanofiber layers, layered scaffolds were fabricated by sequential electrospinning. These scaffolds consisted of alternating layers of poly(epsilon-caprolactone) microfibers and poly(epsilon-caprolactone) nanofibers. By electrospinning the nanofiber layers for different lengths of time, the thickness of the nanofiber layers could be modulated. Bilayered constructs consisting of microfiber scaffolds with varying thicknesses of nanofibers on top were generated and evaluated for their potential to affect rat marrow stromal cell attachment, spreading, and infiltration. Cell attachment after 24 h did not increase with increasing number of nanofibers, but the presence of nanofibers enhanced cell spreading as evidenced by stronger F-actin staining. Additionally, increasing the thickness of the nanofiber layer reduced the infiltration of cells into the scaffolds under both static and flow perfusion culture for the specific conditions tested. The scaffold design presented in this study allows for cellular infiltration into the scaffolds while at the same time providing nanofibers as a physical mimicry of extracellular matrix.     

Fiber alignment directs cell motility over chemotactic gradients

The ability of tissue engineered scaffolds to direct cell behavior is paramount for scaffold design. Cell migration can be directed by various methods including chemical, adhesive, mechanical, and topographical cues. Electrospinning has emerged as a popular method to control topography and create fibrous scaffolds similar to that found in extracellular matrix. One major hurdle is limited cell infiltration and several studies have explored methods to alter electrospun materials to increase scaffold porosity; however, uniform cell distributions within scaffolds is still limited. Towards this, we investigated the motility of HUVECs on a model system of electrospun hyaluronic acid fibers under a gradient of VEGF and found that topographical cues dominate cell motility direction. Using time‐lapse microscopy, cell aspect ratio, and migration angle were measured; cells were directed in a chemical gradient and/or on aligned electrospun fibers. Measurements of the persistence time demonstrated an additive effect of the chemical gradient and fiber alignment. However, when fibers were aligned perpendicular to a chemical gradient, cells were directed by fiber alignment and there was no effect of the chemical gradient. These results suggest that topographical cues may be more influential than chemical cues in directing cell motility and should be considered in material design. Biotechnol. Bioeng. 2013; 110: 1249–1254. © 2012 Wiley Periodicals, Inc.     

Coating electrospun collagen and gelatin fibers with perlecan domain I for increased growth factor binding

Electrospun natural polymer membranes were fabricated from collagen or gelatin coated with a bioactive recombinant fragment of perlecan, a natural heparan sulfate proteoglycan. The electrospinning process allowed the facile processing of a three-dimensional, porous fibril (2-6 microm in diameter) matrix suitable for tissue engineering. Laser scanning confocal microscopy revealed that osteoblast-like MG63 cells infiltrated the depth of the electrospun membrane evenly without visible apoptosis. Tissue engineering scaffolds ideally mimic the extracellular matrix; therefore, the electrospun membrane must contain both structural and functional matrix features. Fibers were coated, after processing, with perlecan domain I (PlnDI) to improve binding of basic fibroblast growth factor (FGF-2), which binds to native heparan sulfate chains on PlnDI. PlnDI-coated electrospun collagen fibers were ten times more effective than heparin-BSA collagen fibers at binding FGF-2. Because FGF-2 modulates cell growth, differentiation, migration and survival, the ability to effectively bind FGF-2 to an electrospun matrix is a key improvement in creating a successful tissue engineering scaffold.     

Effect of organosoluble salts on the nanofibrous structure of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Electrospinning of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) in chloroform was investigated to develop non-woven biodegradable nanofibrous structures for tissue engineering. Ultrafine PHBV fibers were obtained by electrospinning of 20 wt.% PHBV solution in chloroform and the resulting fiber diameters were in the range of 1.0-4.0 microm. When small amounts of benzyl trialkylammonium chlorides were added to the PHBV solution, the average diameter was decreased to 1.0 microm and the fibers were amounted in a straight shape. Conductivity of the PHBV solution was a major parameter affecting the morphology and diameter of the electrospun PHBV fibers. PHBV non-woven structures electrospun with salt exhibited a higher degradation rate than those prepared without salt probably due to the increase of surface area of PHBV fibers.     

静电纺丝的主要参数对PLGA纤维支架形貌和纤维直径的影响

EST(expressed sequence tags,EST)是一段长约150～500bp基因表达的外源序列片段,是由大规模随机挑取的cDNA克隆测序得到的组织或细胞基因组的表达序列标签。一个EST代表生物某一时期的某种组织或细胞的一个表达基因。主要综述了EST技术的原理方法,哺乳动物早期胚胎研究的理论基础以及EST技术在早期胚胎研究方面的应用,并讨论了利用EST进行研究分析的发展趋势。     

静电纺丝的主要参数对ＰＬＧＡ纤维支架形貌和纤维直径的影响

目的以聚乳酸-羟基乙酸共聚物(PLGA)为材料,采用静电纺丝方法制备纤维支架,考察制备参数对纤维支架结构及纤维直径的影响规律。方法以四氢呋喃(THF)和N,N-二甲基甲酰胺(DMF)的混合液为溶剂,调节PLGA溶液浓度、流量及电场强度分别制备了具有不同表面形貌的纤维支架。通过扫描电镜(SEM)观察了纺丝溶液的浓度、流量及电场强度对纤维形貌和直径的影响。同时在制备的PLGA纤维支架上接种了人的真皮成纤维细胞,并对细胞在PLGA支架上的黏附和增殖情况进行了研究,从而来评价支架材料的细胞相容性。结论结果表明,随着纺丝溶液浓度的增加,纤维直径逐渐增大,纤维直径的分布也随之增大。随着流量的增加,纤维直径略有增大。随着电场强度的增大,纤维直径没有明显的变化。但是电压和浓度的增大有助于减少珠丝的产生。体外细胞培养实验证明,制备的PLGA纤维支架能支持细胞正常的黏附和增殖活动。     

PHBV‐TiO2 mats prepared by electrospinning technique: Physico‐chemical properties and cytocompatibility

One of the most important challenges in tissue engineering research is the development of biomimetic materials. In this present study, we have investigated the effect of the titanium dioxide (TiO₂) nanoparticles on the properties of electrospun mats of poly (hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), to be used as scaffold. The morphology of electrospun fibers was observed by scanning electron microscopy (SEM). Both pure PHBV and nanocomposites fibers were smooth and uniform. However, there was an increase in fiber diameter with the increase of TiO₂ concentration. Thermal properties of PHBV and nanocomposite mats were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC analysis showed that the crystallization temperature for PHBV shifts to higher temperature in the presence of the nanoparticles, indicating that TiO₂ nanoparticles change the process of crystallization of PHBV due to heterogeneous nucleation effect. TGA showed that in the presence of the nanoparticles, the curves are shifted to lower temperatures indicating a decreasing in thermal stability of nanocomposites compared to pure PHBV. To produce scaffolds for tissue engineering, it is important to evaluate the biocompatibility of the material. Cytotoxicity assay showed that TiO₂ nanoparticles were not cytotoxic for cells at the concentration used to synthesize the mats. The proliferation of cells on the mats was evaluated by the MTT assay. Results showed that the nanocomposite samples increased cell proliferation compared to the pure PHBV. These results indicate that continuous electrospun fibrous scaffolds may be a good substrate for tissue regeneration.     

Fabrication,Characterization and Cellular Compatibility of Poly(Hydroxy Alkanoate) Composite Nanofibrous Scaffolds for Nerve Tissue Engineering

Tissue engineering techniques using a combination of polymeric scaffolds and cells represent a promising approach for nerve regeneration. We fabricated electrospun scaffolds by blending of Poly (3-hydroxybutyrate) (PHB) and Poly (3-hydroxy butyrate-co-3- hydroxyvalerate) (PHBV) in different compositions in order to investigate their potential for the regeneration of the myelinic membrane. The thermal properties of the nanofibrous blends was analyzed by differential scanning calorimetry (DSC), which indicated that the melting and glass temperatures, and crystallization degree of the blends decreased as the PHBV weight ratio increased. Raman spectroscopy also revealed that the full width at half height of the band centered at 1725 cm⁻¹ can be used to estimate the crystalline degree of the electrospun meshes. Random and aligned nanofibrous scaffolds were also fabricated by electrospinning of PHB and PHBV with or without type I collagen. The influence of blend composition, fiber alignment and collagen incorporation on Schwann cell (SCs) organization and function was investigated. SCs attached and proliferated over all scaffolds formulations up to 14 days. SCs grown on aligned PHB/PHBV/collagen fibers exhibited a bipolar morphology that oriented along the fiber direction, while SCs grown on the randomly oriented fibers had a multipolar morphology. Incorporation of collagen within nanofibers increased SCs proliferation on day 14, GDNF gene expression on day 7 and NGF secretion on day 6. The results of this study demonstrate that aligned PHB/PHBV electrospun nanofibers could find potential use as scaffolds for nerve tissue engineering applications and that the presence of type I collagen in the nanofibers improves cell differentiation.     

Electrospun Nanofiber Scaffolds with Gradations in Fiber Organization

The goal of this protocol is to report a simple method for generating nanofiber scaffolds with gradations in fiber organization and test their possible applications in controlling cell morphology/orientation. Nanofiber organization is controlled with a new fabrication apparatus that enables the gradual decrease of fiber organization in a scaffold. Changing the alignment of fibers is achieved through decreasing deposition time of random electrospun fibers on a uniaxially aligned fiber mat. By covering the collector with a moving barrier/mask, along the same axis as fiber deposition, the organizational structure is easily controlled. For tissue engineering purposes, adipose-derived stem cells can be seeded to these scaffolds. Stem cells undergo morphological changes as a result of their position on the varied organizational structure, and can potentially differentiate into different cell types depending on their locations. Additionally, the graded organization of fibers enhances the biomimicry of nanofiber scaffolds so they more closely resemble the natural orientations of collagen nanofibers at tendon-to-bone insertion site compared to traditional scaffolds. Through nanoencapsulation, the gradated fibers also afford the possibility to construct chemical gradients in fiber scaffolds, and thereby further strengthen their potential applications in fast screening of cell-materials interaction and interfacial tissue regeneration. This technique enables the production of continuous gradient scaffolds, but it also can potentially produce fibers in discrete steps by controlling the movement of the moving barrier/mask in a discrete fashion.     

Adapting the Electrospinning Process to Provide Three Unique Environments for a Tri-layered In Vitro Model of the Airway Wall

Electrospinning is a highly adaptable method producing porous 3D fibrous scaffolds that can be exploited in in vitro cell culture. Alterations to intrinsic parameters within the process allow a high degree of control over scaffold characteristics including fiber diameter, alignment and porosity. By developing scaffolds with similar dimensions and topographies to organ- or tissue-specific extracellular matrices (ECM), micro-environments representative to those that cells are exposed to in situ can be created. The airway bronchiole wall, comprised of three main micro-environments, was selected as a model tissue. Using decellularized airway ECM as a guide, we electrospun the non-degradable polymer, polyethylene terephthalate (PET), by three different protocols to produce three individual electrospun scaffolds optimized for epithelial, fibroblast or smooth muscle cell-culture. Using a commercially available bioreactor system, we stably co-cultured the three cell-types to provide an in vitro model of the airway wall over an extended time period.This model highlights the potential for such methods being employed in in vitro diagnostic studies investigating important inter-cellular cross-talk mechanisms or assessing novel pharmaceutical targets, by providing a relevant platform to allow the culture of fully differentiated adult cells within 3D, tissue-specific environments.     

Biomimetic nanofibrous scaffolds: preparation and characterization of PGA/chitin blend nanofibers

Electrospinning of poly(glycolic acid) (PGA)/chitin blend solutions in 1,1,1,3,3,3-hexafluoro-2-propanol was investigated to fabricate biodegradable and biomimetic nanostructured scaffolds for tissue engineering. The morphology of the electrospun PGA/chitin blend nanofibers was investigated with a field emission scanning electron microscope. The PGA/chitin blend fibers have average diameters of around 140 nm, and their diameters have a distribution in the range 50-350 nm. The miscibility of PGA/chitin blend fibers was examined by differential scanning calorimetry. The PGA and chitin were immiscible in the as-spun nanofibrous structure. An in vitro degradation study of PGA/chitin blend nanofibers was conducted in phosphate-buffered saline, pH 7.2. It was found that the hydrolytic cleavage of PGA in the blend nanofibers was accelerated by the coexistence of hydrophilic chitin. To assay the cytocompatability and cell behavior on the PGA/chitin blend nanofibrous scaffolds, cell attachment and spreading of normal human epidermal fibroblasts seeded on the scaffolds were studied. Our results indicate that the PGA/chitin blend nanofibrous matrix, particularly the one that contained 25% PGA and 75% chitin with bovine serum albumin coating, could be a good candidate for tissue engineering scaffolds, because it has an excellent cell attachment and spreading for normal human fibroblasts.     

Preparation of 3D fibrin scaffolds for stem cell culture applications

Stem cells are found in naturally occurring 3D microenvironments in vivo, which are often referred to as the stem cell niche. Culturing stem cells inside of 3D biomaterial scaffolds provides a way to accurately mimic these microenvironments, providing an advantage over traditional 2D culture methods using polystyrene as well as a method for engineering replacement tissues. While 2D tissue culture polystrene has been used for the majority of cell culture experiments, 3D biomaterial scaffolds can more closely replicate the microenvironments found in vivo by enabling more accurate establishment of cell polarity in the environment and possessing biochemical and mechanical properties similar to soft tissue. A variety of naturally derived and synthetic biomaterial scaffolds have been investigated as 3D environments for supporting stem cell growth. While synthetic scaffolds can be synthesized to have a greater range of mechanical and chemical properties and often have greater reproducibility, natural biomaterials are often composed of proteins and polysaccharides found in the extracelluar matrix and as a result contain binding sites for cell adhesion and readily support cell culture. Fibrin scaffolds, produced by polymerizing the protein fibrinogen obtained from plasma, have been widely investigated for a variety of tissue engineering applications both in vitro and in vivo. Such scaffolds can be modified using a variety of methods to incorporate controlled release systems for delivering therapeutic factors. Previous work has shown that such scaffolds can be used to successfully culture embryonic stem cells and this scaffold-based culture system can be used to screen the effects of various growth factors on the differentiation of the stem cells seeded inside. This protocol details the process of polymerizing fibrin scaffolds from fibrinogen solutions using the enzymatic activity of thrombin. The process takes 2 days to complete, including an overnight dialysis step for the fibrinogen solution to remove citrates that inhibit polymerization. These detailed methods rely on fibrinogen concentrations determined to be optimal for embryonic and induced pluripotent stem cell culture. Other groups have further investigated fibrin scaffolds for a wide range of cell types and applications - demonstrating the versatility of this approach.     

Electrospun fibrous mats with high porosity as potential scaffolds for skin tissue engineering

Diffusional limitations of mass transport have adverse effects on engineering tissues that normally have high vascularity and cellularity. The current electrospinning method is not always successful to create micropores to encourage cell infiltration within the scaffold, especially when relatively large-sized pores are required. In this study, a slow rotating frame cylinder was developed as the collector to extend the pore size and increase the porosity of electrospun fibrous scaffolds. Fibrous mats with porosity as high as 92.4% and average pore size of 132.7 microm were obtained. Human dermal fibroblasts (HDFs) were seeded onto these mats, which were fixed on a cell-culture ring to prevent the shrinkage and contraction during the incubation. The viability test indicated that significantly more HDFs were generated on highly porous fibrous mats. Toluidine blue staining showed that the highly porous scaffold provided mechanical support for cells to maintain uniform distribution. The cross-section observations indicated that cells migrated and infiltrated more than 100 microm inside highly porous fibrous mats after 5 d incubation. The immunohistochemistry analysis demonstrated that cells began secreting collagen, which is the main constituent of extracellular matrix. It is supposed that highly porous electrospun fibrous scaffolds could be constructed by this elaboration and may be used for skin tissue engineering.     

Electrospun sodium alginate/poly(ethylene oxide) core-shell nanofibers scaffolds potential for tissue engineering applications

Core-shell structure nanofibers of sodium alginate/poly(ethylene oxide) were prepared via electrospinning their dispersions in water solution. The core-shell structure morphology of the obtained nanofibers was viewed under scanning electron microscope (SEM) and transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS) analysis was used to further quantify the chemical composition of the core-shell composite SA/PEO nanofibers surface in detail. Furthermore, one-step cross-linking method through being immersed in CaCl₂ solution was investigated to improve the anti-water property of the electrospun nanofibers mats in order to facilitate their practical applications as tissue engineering scaffolds, and the changes of the structural of nanofibers before and after cross-linking was characterized by Fourier transform infrared (FT-IR). Indirect cytotoxicity assessment indicated that SA/PEO nanofibers membrane was nontoxic to the fibroblasts cells, and cell culture suggested that SA/PEO nanofibers tended to promote fibroblasts cells attachment and proliferation. It was assumed that the nanofibers membrane of electrospun SA/PEO could be used for tissue engineering scaffolds.     

Three-dimensional cancer cell culture in high-yield multiscale scaffolds by shear spinning

Polymeric scaffolds comprising two size scales of microfibers and submicron fibers can better support three-dimensional (3D) cell growth in tissue engineering, making them an important class of healthcare material. However, a major manufacturing barrier hampers their translation into wider practical use: scalability. Traditional production of two-scale scaffolds by electrospinning is slow and costly. For day-to-day cell cultures, the scaffolds need to be affordable, made in high yield to drive down cost. Combining expertise from academia and industry from the United Kingdom and United States, this study uses a new series of high-yield, low-cost scaffolds made by shear spinning for tissue engineering. The scaffolds comprise interwoven submicron fibers and microfibers throughout as observed under scanning electron microscopy and demonstrate good capability to support cell culturing for tumor modeling. Three model human cancer cell lines (HEK293, A549 and MCF-7) with stable expression of GFP were cultured in the scaffolds and found to exhibit efficient cell attachment and sustained 3D growth and proliferation for 30 days. Cryosection and multiphoton fluorescence microscopy confirmed the formation of compact 3D cell clusters throughout the scaffolds. In addition, comparative growth curves of 2D and 3D cultures show significant cell-type-dependent differences. This work applies high-yield shear-spun scaffolds in mammalian tissue engineering and brings practical, affordable applications of multiscale scaffolds closer to reality. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2750, 2019.     

Formation of collagen-glycosaminoglycan blended nanofibrous scaffolds and their biological properties

The development of blended collagen and glycosaminoglycan (GAG) scaffolds can potentially be used in many soft tissue engineering applications since the scaffolds mimic the structure and biological function of native extracellular matrix (ECM). In this study, we were able to obtain novel nanofibrous collagen-GAG scaffolds by electrospinning collagen blended with chondroitin sulfate (CS), a widely used GAG, in a mixed solvent of trifluoroethanol and water. The electrospun collagen-GAG scaffold with 4% CS (COLL-CS-04) exhibited a uniform fiber structure with nanoscale diameters. A second collagen-GAG scaffold with 10% CS consisted of smaller diameter fibers but exhibited a broader diameter distribution due to the different solution properties in comparison with COLL-CS-04. After cross-linking with glutaraldehyde vapor, the collagen-GAG scaffolds became more biostable and were resistant to collagenase degradation. This is evidently a more favorable environment allowing increased proliferation of rabbit conjunctiva fibroblast on the scaffolds. Incorporation of CS into collagen nanofibers without cross-linking did not increase the biostability but still promoted cell growth. The potential of applying the nanoscale collagen-GAG scaffold in tissue engineering is significant since the nanodimension fibers made of natural ECM mimic closely the native ECM found in the human body. The high surface area characteristic of this scaffold may maximize cell-ECM interaction and promote tissue regeneration faster than other conventional scaffolds.     

Electrospun Fibrous Scaffolds of Poly(glycerol-dodecanedioate) for Engineering Neural Tissues From Mouse Embryonic Stem Cells

For tissue engineering applications, the preparation of biodegradable and biocompatible scaffolds is the most desirable but challenging task.  Among the various fabrication methods, electrospinning is the most attractive one due to its simplicity and versatility. Additionally, electrospun nanofibers mimic the size of natural extracellular matrix ensuring additional support for cell survival and growth. This study showed the viability of the fabrication of long fibers spanning a larger deposit area for a novel biodegradable and biocompatible polymer named poly(glycerol-dodecanoate) (PGD)¹ by using a newly designed collector for electrospinning. PGD exhibits unique elastic properties with similar mechanical properties to nerve tissues, thus it is suitable for neural tissue engineering applications. The synthesis and fabrication set-up for making fibrous scaffolding materials was simple, highly reproducible, and inexpensive. In biocompatibility testing, cells derived from mouse embryonic stem cells could adhere to and grow on the electrospun PGD fibers. In summary, this protocol provided a versatile fabrication method for making PGD electrospun fibers to support the growth of mouse embryonic stem cell derived neural lineage cells.     

应用于组织工程支架制备的电纺技术

组织工程技术为修复病损的组织和器官提供了一种新的途径,在组织工程中,细胞支架起着支撑细胞生长、引导组织再生、控制组织结构和释放活性因子等作用。针对电纺技术的新发展和细胞支架的新理念,综述了国内外利用电纺技术制备细胞支架的工艺条件、制备方法、组织细胞培养等方面的研究进展,并结合作者所在研究团队的研究工作提出了对未来电纺技术在组织工程中应用的研究重点和发展方向的认识。     

Increased curvature of hollow fiber membranes could up‐regulate differential functions of renal tubular cell layers

Tissue engineering devices as in vitro cell culture systems in scaffolds has encountered the bottleneck due to their much lower cell functions than real tissues/organs in vivo. Such situation has been improved in some extent by mimicking the cell microenvironments in vivo from either chemical or physical ways. However, microenvironmental curvature, commonly seen in real tissues/organs, has never been manipulated to regulate the cell performance in vitro. In this regard, this paper fabricated polysulfone membranes with or without polyethylene glycol modification to investigate the impact of curvature on two renal tubular cells. Regardless the varying membrane curvatures among hollow fiber membranes of different diameters and flat membrane of zero curvature, both renal cells could well attach at 4 h of seeding and form similar confluent layers at 6 days on each membrane. Nevertheless, the renal cells on hollow fibers, though showing confluent morphology as those on flat membranes, expressed higher renal functions and, moreover, the renal functions significantly increased with the membrane curvature among hollow fibers. Such upregulation on functions was unassociated with mass transport barrier of hollow fibers, because the cultures on lengthwise cut hollow fibers without mass transfer barrier showed same curvature effect on renal functions as whole hollow fibers. It could be proposed that the curvature of hollow fiber membrane approaching to the large curvature in kidney tubules increased the mechanical stress in the renal cells and thus might up‐regulate the renal cell functions. In conclusion, the increase of substrate curvature could up‐regulate the cell functions without altering the confluent cell morphology and this finding will facilitate the design of functional tissue engineering devices. Biotechnol. Bioeng. 2013; 110: 2173–2183. © 2013 Wiley Periodicals, Inc.