Rapid isolation and sequencing of purified plasmid DNA from Bacillus subtilis.

We report two methods for isolation of plasmid DNA from the gram-positive bacterium Bacillus subtilis. The protoplast alkaline lysis procedure was developed for general use, and the protoplast alkaline lysis magic procedure was developed for isolation of DNA for sequencing. Both procedures yielded large amounts of high-quality DNA in less than 1 h, while current protocols require 4 to 7 h to perform and give lower yields and quality. Plasmid DNA was obtained from strains containing either high- or low-copy-number plasmids. In addition, the procedures were easily adapted to yield large amounts of plasmid DNA suitable for sequencing from another gram-positive organism, Staphylococcus aureus. Further, we demonstrated that neither chloramphenicol, used for plasmid selection, nor the mutation recE4 reduced plasmid DNA yield from the strains we examined.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444.

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

A mass balance study to assess the extent of contaminant removal achieved in the operations for the primary recovery of plasmid DNA from Escherichia coli cells

Mass balances were performed on an alkaline lysis operation for the primary recovery of supercoiled plasmid DNA as part of a process for plasmid gene preparation. Escherichia coli DH5alpha/pSVbeta was cultured in defined medium by fed-batch fermentation and harvested at the end of the exponential phase. Alkaline lysis of the recombinant cells was performed at fixed shear rates ranging between 46 and 461 s(-1), with neutralization 100 and 300 s after the initiation of the lysis. Mass balance calculations were used to optimize the operating conditions for carrying out the alkaline lysis operation. The results indicated that a plasmid yield of 75% and purity with respect to total DNA of 60% were achievable during the primary recovery operation. The influences of key contaminants, including the soluble proteins and the suspended solids, as they bear on the subsequent purification operations, were evaluated and discussed.     

Rapid micropreps and minipreps of Ti plasmids and binary vectors fromAgrobacterium tumefaciens

A simple and versatile procedure has been developed for the isolation of both large helper/Ti plasmids and binary vectors fromAgrobacterium tumefaciens. Using a slightly modified alkaline lysis protocol, intact plasmid can be recovered from cultures grown in standard micro-centrifuge tubes or culture tubes in sufficient yield and purity to allow for restriction analysis on ethidium bromide stained gels of the >200 kb Ti plasmid DNA. Contamination by chromosomal DNA is minimal and there is thus no need for isopycnic gradient purification. This same procedure can be combined with a high temperature treatment (37°C) and antibiotic selection to generate preparations containing binary vector DNA that are virtually free of interfering Ti plasmid DNA. Restriction patterns produced from these binary vector DNA preparations are unambiguous and therefore preliminary screening by Southern hybridization can be eliminated.     

Lipopolysaccharides of the acidophilic heterotrophic bacteria Acidiphilium cryptum and Acidiphilium symbioticum

Abstract Lipopolysaccharides of Acidiphilium cryptum and Acidiphilium symbioticum , the acidophilic heterotrophs of sulfidic mine environments, contain rhamnose, glucose, galactose and mannose. Molar ratios of the neutral sugars differ in these two lipopolysaccharide preparations. 3-Deoxy-d-manno-2-octulosonic acid is present in both the lipopolysaccharides, and galactosamine was the only amino sugar detected. 3-Hydroxytetradecanoic acid was found to be the major fatty acid component along with minute amounts of decanoic and dodecanoic acids. Deoxycholate-PAGE electrophoresis revealed the presence of short sugar chains and unsubstituted cores. The implications of these findings are discussed in relation to acidiphilicity and systematics of Acidiphilium species.     

Variation in susceptibility of Helicoverpa armigera (Hübner) and Helicoverpa punctigera (Wallengren) (Lepidoptera: Noctuidae) in Australia to two Bacillus thuringiensis toxins

Intra-specific variation in susceptibility of Helicoverpa armigera (Hübner) and Helicoverpa punctigera (Wallengren) in Australia to the Cry1Ac and Cry2Ab delta-endotoxins from Bacillus thuringiensis (Berliner) (Bt) was determined to establish a baseline for monitoring changes that might occur with the use of Bt cotton. Strains of H. armigera and H. punctigera were established from populations collected primarily from commercial farms throughout the Australian cotton belts. Strains were evaluated for susceptibility using two bioassay methods (surface treatment and diet incorporation) by measuring the dose response for mortality (LC50) and growth inhibition (IC50). The variation in LC50 among H. armigera (n=17 strains) and H. punctigera (n=12 strains) in response to Cry1Ac was 4.6- and 3.2-fold, respectively. The variation in LC50 among H. armigera (n=19 strains) and H. punctigera (n=12 strains) to Cry2Ab was 6.6- and 3.5-fold, respectively. The range of Cry1Ac induced growth inhibition from the 3rd to 4th instar in H. armigera (n=15 strains) was 3.6-fold and in H. punctigera (n=13 strains) was 2.6-fold, while the range of Cry2Ab induced growth inhibition from neonate to 3rd instar in H. armigera (n=13 strains) was 4.3-fold and in H. punctigera (n=12 strains) was 6.1-fold. Variation in susceptibility was also evaluated for two age classes (neonates and 3rd instars) in laboratory strains of H. armigera and H. punctigera. Neonates of H. punctigera had the same or higher sensitivity to Bt than 3rd instars. Neonates of H. armigera were more sensitive to Cry2Ab than 3rd instars, while being less sensitive to Cry1Ac than 3rd instars. Differences in the two methods of bioassay used affected relative sensitivity of species to Bt toxins, highlighting the need to standardize bioassay protocols.     

Flexprep: Scale-flexible rapid plasmid preparation for analysis of recombinant clones

A scale-flexible and cost-efective protocol for plasmid preparation is described to cover miniprep and midiprep scale work in a microcentriguge format for analysis of recombinant clones. this protocol relies on a modified alkaline lysis of Escherichia coli cells and subsequent purification of plasmid DNA with no organic extraction and alcohol precipitation. It can process up to 20 mL of E. coli cells carrying 3–10 kbp plasmid vectors in <10 min. Flexprep delivers sufficient yield and purity of plasmid DNA for routine applications including restriction enzyme digestion and fluorescent automated sequencing.     

A continuous process to extract plasmid DNA based on alkaline lysis

Rapid advances in the fields of DNA vaccines and gene therapy have produced increased demands for large quantities of recombinant plasmid DNA. The protocol presented here extracts plasmid DNA in a scalable continuous process based on an alkaline lysis protocol. In the process, harvested bacteria are passed through two mixing chambers at controlled speeds to effect lysis and control alkalinity. The resulting solution is passed through a series of filters to remove contaminants and then ethanol precipitated. This process replaces all the centrifugation steps before obtaining crude plasmid and can be easily scaled up to meet demands for larger quantities. Using this procedure, plasmid can be extracted and purified from 4 l of Escherichia coli culture at an OD 600 nm of 50 in <90 min. The plasmid yields are approximately 80-90 mg l(-1) culture.     

Morphological changes in an acidophilic bacterium induced by heavy metals

The Acidiphilium strains inhabit acidic mine regions where they are subjected to occasional environmental stresses such as high and low temperatures, exposure to various heavy metals, etc. Change in morphology is one of the strategies that bacteria adopt to cope with environmental stresses; however, no study on this aspect has been reported in the case of Acidiphilium sp. This work is an attempt using the acidophilic heterotrophic bacterium Acidiphilium symbioticum H8. It was observed that the maximum alterations in size occurred when the bacterium was exposed to sub-inhibitory concentrations of Cu and Cd. Loosely packed coccobacillus-type normal cells formed characteristic chains of coccoidal lenticular shape with constrictions at the junctions between them in the presence of Cd; Cu induced transformation of cells to become round shaped; Ni caused the cells to aggregate, but Zn showed no effect. Respective metal depositions on the cell surface were confirmed by scanning electron microscopy equipped with energy dispersive X-ray analysis. Cell bound Ca²⁺ ions were replaced by these metal ions and measured by inductively coupled plasma mass spectrometry from the culture filtrate. Cell shape changed only after the addition of sub-inhibitory concentrations of the metals, but in growth inhibitory concentrations it was similar to the normal cells.     

Cell disruption using a different methodology for proteomics analysis of Trypanosoma cruzi strains

We have developed a cell disruption method to produce a protein extract using Trypanosoma cruzi cells based on a straightforward hypoosmotic lysis protocol. The procedure consists of three steps: incubation of the cells in a hypoosmotic lysis buffer, sonication in a water bath, and centrifugation. The final protein extract was designated TcS12. The stages of cell disruption at different incubation times were monitored by differential interference contrast microscopy. After 30 min of incubation in lysis buffer at 4 °C, the T. cruzi epimastigote forms changed from slender to round-shaped parasites. Nevertheless, cell disruption took place following sonication of the sample for 30 min. The efficiency of the methodology was also validated by flow cytometry, which resulted in 72% of propidium iodide (PI)-labeled cells. To estimate the protein extraction yield and the differential protein expression, the proteomics profile of four T. cruzi strains (CL-Brener, Dm28c, Y, and 4167) were analyzed by liquid chromatography tandem mass spectrometry (LCMS/MS) on a SYNAPT HDMS system using the label-free MS^E approach. ProteinLynx Global Server (version 2.5) with Expression^E analysis identified a total of 1153 proteins and revealed 428 differentially expressed proteins among the strains. Gene ontology analysis showed that not only cytosolic proteins but also nuclear and organellar ones were present in the extract.     

积累PHB菌种隐藏嗜酸菌DX1-1的诱变改良

采用紫外线照射和放射性元素钴60辐射诱变方法,对分离纯化的一株可积累聚β-羟基丁酸酯(PHB)的Acidiphilium cryptumDX1-1进行了诱变改良,以获得PHB高产菌.结果显示钴60诱变最佳诱变剂量为100 Gy,紫外诱变的最佳剂量为15 W、30 cm、60 s,紫外诱变的效果比钴60诱变的效果好.诱变后筛选得到的一株菌UV60-3,PHB含量达到28.56 g/L,是原菌株的1.45倍,并且可稳定遗传.对菌株UV60-3积累PHB的碳氮比进行了探索,结果显示在碳源浓度60 g/L,氮源浓度30 g/L,C/N为3.76时PHB含量最高,PHB含量达到30.57 g/L.     

Transformation of Acidiphilium by electroporation and conjugation.

Two techniques, electroporation and conjugation, have been used to introduce the RK2-based broad-host-range plasmids pRK415 and pLAFR3 into strains of the bacterial genus Acidiphilium. Using electroporation, cells were also transformed with a series of chimeric plasmids constructed by cloning cryptic Acidiphilium plasmids into the Escherichia coli vector pBR328. Various parameters affecting electroporation were investigated. Transformation efficiency varied widely with different recipient strains. Growth at an elevated temperature (37 degrees C) prior to electroporation increased transformation efficiency 10-fold compared with growth at 32 degrees C. For three strains tested, optimum transformation efficiency was obtained with field strengths of 10-15 kV/cm. Transformation efficiency increased linearly with increasing DNA concentration up to 10 micrograms/mL. Transformation efficiencies in these experiments ranged up to 10(4) transformants/micrograms DNA. Mobilization of pRK415 and pLAFR3 from E. coli strain S17.1 into several Acidiphilium strains was achieved following incubation for 3 h on nutrient agar medium (pH 7.0). Conjugation frequencies in the range of 10(-5)-10(-9) per recipient cell were obtained. Conjugation frequency was also dependent on recipient strain.     

Structure of the core part of the lipopolysaccharides from Proteus penneri strains 7, 8, 14, 15, and 21

The core-lipid A region of the lipopolysaccharides from Proteus penneri strains 7, 8, 14, 15, and 21 was studied using NMR spectroscopy, ESI MS, and chemical analysis after alkaline deacylation, deamination, and mild-acid hydrolysis of the lipopolysaccharides. The following general structure of the major core oligosaccharides is proposed: [abstract: see text] where all sugars are in the pyranose form and have the D configuration unless otherwise stated, Hep and DDHep=L-glycero- and D-glycero-D-manno-heptose, respectively, K=H, and Q=H in strain 8 or alpha-Glc in strains 7, 14, 15, and 21. In addition, several minor structural variants are present, including those lacking Ara4N in strains 7 and 15 and having the alpha-GlcN residue N-acylated to a various degree with glycine in strains 7, 8, 14, and 21. In strain 14, there are also core oligosaccharides with K=amide of beta-D-GalpA with putrescine, spermidine, or 4-azaheptane-1,7-diamine; remarkably, these structural variants lack either the PEtN group or the alpha-Hep-(1-->2)-alpha-DDHep disaccharide fragment at alpha-D-GalpA. While structural features of the inner core part are shared by Proteus strains studied earlier, the outermost Q-(1-->4)-alpha-GalNAc-(1-->2)-alpha-DDHep-(1-->6)-alpha-GlcN oligosaccharide unit has not been hitherto reported.     

Extending the Bacillus cereus group genomics to putative food-borne pathogens of different toxicity

The Bacillus cereus group represents sporulating soil bacteria containing pathogenic strains which may cause diarrheic or emetic food poisoning outbreaks. Multiple locus sequence typing revealed a presence in natural samples of these bacteria of about 30 clonal complexes. Application of genomic methods to this group was however biased due to the major interest for representatives closely related to Bacillus anthracis. Albeit the most important food-borne pathogens were not yet defined, existing data indicate that they are scattered all over the phylogenetic tree. The preliminary analysis of the sequences of three genomes discussed in this paper narrows down the gaps in our knowledge of the B. cereus group. The strain NVH391-98 is a rare but particularly severe food-borne pathogen. Sequencing revealed that the strain should be a representative of a novel bacterial species, for which the name Bacillus cytotoxis or Bacillus cytotoxicus is proposed. This strain has a reduced genome size compared to other B. cereus group strains. Genome analysis revealed absence of sigma B factor and the presence of genes encoding diarrheic Nhe toxin, not detected earlier. The strain B. cereus F837/76 represents a clonal complex close to that of B. anthracis. Including F837/76, three such B. cereus strains had been sequenced. Alignment of genomes suggests that B. anthracis is their common ancestor. Since such strains often emerge from clinical cases, they merit a special attention. The third strain, KBAB4, is a typical facultative psychrophile generally found in soil. Phylogenic studies show that in nature it is the most active group in terms of gene exchange. Genomic sequence revealed high presence of extra-chromosomal genetic material (about 530kb) that may account for this phenomenon. Genes coding Nhe-like toxin were found on a big plasmid in this strain. This may indicate a potential mechanism of toxicity spread from the psychrophile strain community. The results of this genomic work and ecological compartments of different strains incite to consider a necessity of creating prophylactic vaccines against bacteria closely related to NVH391-98 and F837/76. Presumably developing of such vaccines can be based on the properties of non-pathogenic strains such as KBAB4 or ATCC14579 reported here or earlier. By comparing the protein coding genes of strains being sequenced in this project to others we estimate the shared proteome, or core genome, in the B. cereus group to be 3000+/-200 genes and the total proteome, or pan-genome, to be 20-25,000 genes.     

重组大肠杆菌碱裂解方法的改进

为了降低质粒DNA的生产成本,对经典碱裂解法中的溶液III进行了改进,以表达溶菌酶基因的pcDNKLYZ重组质粒转化的大肠杆菌DH5α为指示菌,用标准碱裂解和改进碱裂解法提取质粒pcDNKLYZ,以提取的质粒产量和质量为指标,判断优化碱性裂解法的性价比,结果显示,用改进后的碱裂解法裂解重组菌,提取的pcDNKLYZ质粒产量和质量等指标与标准方法接近,而成本仅为标准方法的1/4,可用于重组质粒的大规模制备。     

Purification of plasmid DNA by chromatographic methods

Chromatographic methods have been used to purify the DNA of plasmid RP1. DNA was purified in two stages. DNA was precipitated by ethanol and separated from RNA and proteins in Sepharose 4B column after lysis of plasmid containing cells by alkaline solution of sodium dodecylsulphate. Separation of the total DNA preparation and isolation of plasmid DNA was achieved at the second stage by chromatography on the hydroxyapatite column. The resulting purified plasmid DNA was free of RNA, protein and linear fragments of chromosomal DNA. The plasmid DNA kept intact native structure and possessed the transforming activity. The DNA of RP1 yield after purification by the described technique presented 70-80 micrograms per g of wet biomass.     

Overproduction of alkaline polygalacturonate lyase in recombinant Escherichia coli by a two-stage glycerol feeding approach

This work aims to achieve the overproduction of alkaline polygalacturonate lyase (PGL) with recombinant Escherichia coli by a two-stage glycerol feeding approach. First, the PGL coding gene from Bacillus subtilis WSHB04-02 was expressed in E. coli BL21 (DE3) under the strong inducible T7 promoter of the pET20b (+) vector. And then the influence of media composition, induction temperature, and inducer isopropyl β-D-1-thiogalactopyranoside (IPTG) concentration on cell growth and PGL production was investigated. Finally, a two-stage glycerol feeding strategy was proposed and applied in a 3-L fermenter, where cultivation was conducted at a controlled specific growth rate (μset=0.2) during pre-induction phase, followed by a constant glycerol feeding rate of 12 ml h(-1) at post-induction phase. The total PGL yield reached 371.86 U mL(-1), which is the highest PGL production by recombinant E. coli expression system.     

Proposal for a better integration of bacterial lysis into the production of plasmid DNA at large scale

The paper addresses the question of how to achieve bacterial lysis in large-scale plasmid DNA production processes, where conventional alkaline lysis may become awkward to handle. Bacteria were grown in shaker flasks and a bioreactor. Suboptimal growth conditions were found advantageous for stable plasmid production at high copy numbers (up to 25mg/L could be achieved). Cells were harvested by filtration in the presence of a filter aid. A linear relationship between the biomass and the optimal filter aid concentration in terms of back pressure could be established. Bacteria-containing filter cakes were washed with isotonic buffer and lysis was achieved in situ by a two-step protocol calling for fragilisation of the cells followed by heat lysis in a suitable buffer. RNA and other soluble cell components where washed out of the cake during this step, while the plasmid DNA was retained. Afterwards a clear lysate containing relatively pure plasmid DNA could be eluted from the cake mostly as the desired supercoiled topoisomer, while cell debris and genomic DNA were retained. Lysis is, thus, integrated not only with cell capture but also with a significant degree of isolation/purification, as most impurities were considerably reduced during the procedure.     

High yield electroextraction of proteins from yeast by a flow process

High yields of intracellular enzymes from yeast can be obtained by application of a series of electric field pulses with a flow process. Up to 80-90% of the total activity can be liberated without any further or previous treatment of cells. The method is based on electroinduced changes in the cell envelope leading to a leakage of part of the intracellular proteins without formation of debris and permits treatment of large volumes. Field parameters require a limited electrical power. Treatment of at least 20% wet weight suspensions is possible. The optimal field conditions must be adjusted to the suspension concentration. Maximal yield is obtained within 4h at 30 degrees C for enzymes from Saccharomyces cerevisiae such as hexokinase, 3-phosphoglycerate kinase, and glyceraldehyde-3-phosphate dehydrogenase. The extraction of beta-D-galactosidase from Kluyveromyces lactis lasts 10h but can be accelerated by adding dithiothreitol in the postpulse medium. The specific activities of the electroextracted enzymes are higher than those obtained by mechanical disintegration or enzymatic lysis.