Electrochemical determination of microRNA-21 based on graphene, LNA integrated molecular beacon, AuNPs and biotin multifunctional bio bar codes and enzymatic assay system

MicroRNAs (miRNAs), a kind of small, endogenous, noncoding RNAs (～22 nucleotides), might play a crucial role in early cancer diagnose due to its abnormal expression in many solid tumors. As a result, label-free and PCR-amplification-free assay for miRNAs is of great significance. In this work, a highly sensitive biosensor for sequence specific miRNA-21 detection without miRNA-21 labeling and enrichment was constructed based on the substrate electrode of dendritic gold nanostructure (DenAu) and graphene nanosheets modified glassy carbon electrode. Sulfydryl functionalized locked nucleic acid (LNA) integrated hairpin molecule beacon (MB) probe was used as miRNA-21 capture probe. After hybridized with miRNA-21 and reported DNA loading in gold nanoparticles (AuNPs) and biotin multi-functionalized bio bar codes, streptavidin-HRP was brought to the electrode through the specific interaction with biotin to catalyze the chemical oxidation of hydroquinone by H(2)O(2) to form benzoquinone. The electrochemical reduction signal of benzoquinone was utilized to monitor the miRNA-21 hybridization event. The effect of experimental variables on the amperometric response was investigated and optimized. Based on the specific confirmation of probe and signal amplification, the biosensor showed excellent selectivity and high sensitivity with low detection limit of 0.06 pM. Successful attempts are made in miRNA-21 expression analysis of human hepatocarcinoma BEL-7402 cells and normal human hepatic L02 cells.     

Obstruction of Photoinduced Electron Transfer from Excited Porphyrin to Graphene Oxide: A Fluorescence Turn-On Sensing Platform for Iron (III) Ions

A comparative reaserch of the assembly of different porphyrin molecules on graphene oxide (GO) and reduced graphene oxide (RGO) was carried out, respectively. Despite the cationic porphyrin molecules can be assembled onto the surfaces of graphene sheets, including GO and RGO, to form complexes through electrostatic and π-π stacking interactions, the more obvious fluorescence quenching and the larger red-shift of the Soret band of porphyrin molecule in RGO-bound states were observed than those in GO-bound states, due to the differenc of molecular flattening in degree. Further, more interesting finding was that the complexes formed between cationic porphyrin and GO, rather than RGO sheets, can facilitate the incorporation of iron (III) ions into the porphyrin moieties, due to the presence of the oxygen-contained groups at the basal plane of GO sheets served as auxiliary coordination units, which can high-efficiently obstruct the electron transfer from excited porphyrin to GO sheets and result in the occurrence of fluorescence restoration. Thus, a fluorescence sensing platform has been developed for iron (III) ions detection in this contribution by using the porphyrin/GO nanohybrids as an optical probe, and our present one exhibited rapid and sensitive responses and high selectivity toward iron (III) ions.     

Efficient detection of secondary structure folded nucleic acids related to Alzheimer's disease based on junction probes

Single stranded DNA often forms stable secondary structures under physiological conditions. These DNA secondary structures play important physiological roles. However, the analysis of such secondary structure folded DNA is often complicated because of its high thermodynamic stability and slow hybridization kinetics. In this article, we demonstrate that Y-shaped junction probes could be used for rapid and highly efficient detection of secondary structure folded DNA. Our approach contained a molecular beacon (MB) probe and an assistant probe. In the absence of target, the MB probe failed to hybridize with the assistant probe. Whereas, the MB probe and the assistant probe could cooperatively unwind the secondary structure folded DNA target to form a ternary Y-shaped junction structure. In this condition, the MB probe was also opened, resulting in separating the fluorophores from the quenching moiety and emitting the fluorescence signal. This approach allowed for the highly sensitive detection of secondary structure folded DNA target, such as a tau specific DNA fragment related to Alzheimer's disease in this case. Additionally, this approach showed strong SNPs identifying capability. Furthermore, it was noteworthy that this newly proposed approach was capable of detecting secondary structure folded DNA target in cell lysate samples.     

Large-Stokes-shift-based folded DNA probing systems targeting DNA and miRNA 21 with signal amplification

Large-Stokes-shift based simple folded DNA probing system (LSFP) had a simple folded DNA structure and exhibited a large Stokes-shifted (194?nm) fluorescence signal upon excitation at a single wavelength (386?nm). This Stokes shift was achieved through a simple combination of donor and acceptor fluorophores and employing multi-FRET systematically. This unique large Stokes-shifted fluorescence signal was used to detect target DNA with large increases in the fluorescence signal (9.7–14.2 fold). This LSFP exhibited enough selectivity, distinguishing a perfectly matched sequence from the probe itself and mismatched sequences. Surprisingly, when DSN was used for signal amplification with miR21P probing system whose target is miRNA 21, it showed high sensitivity (13.7?aM) and selectivity (one base mismatch discrimination). This system has several advantages over other molecular beacons (MBs): (i) it is easy to design and synthesize the probing system that does not require the construction of a finely designed stem and loop, as in most MBs (this can prevent the degradation of miR21P itself by DSN enzyme without special backbone modification); (ii) it can control unique fluorescence, such as large Stokes-shifted fluorescence through a simple combination of donor and acceptor fluorophores; and (iii) through signal amplification using DSN, it can efficiently detect extremely small amounts of target miRNA with high sensitivity (13.7?aM).     

Low background signal platform for the detection of ATP: when a molecular aptamer beacon meets graphene oxide

A novel molecular aptamer beacon (MAB) was designed by integrating a single-labeled hairpin-shaped aptamer and graphene oxide (GO). The hairpin-shaped aptamer was constructed with anti-ATP aptamer and another five nucleotides added to the 5'-end of the aptamer which are complementary to nucleotides at the 3'-end of the aptamer to form a hairpin-shaped probe. This newly designed MAB which acts as a low background signal platform was used for the ATP detection based on long-range resonance energy transfer (LrRET). In the absence of ATP, the adsorption of the dye-labeled hairpin-shaped aptamer on GO makes the dyes close proximity to GO surface resulting in high efficiency quenching of fluorescence of the dyes. Therefore, the fluorescence of the designed MAB is completely quenched by GO, and the system shows very low background. Conversely, and very importantly, upon the adding of ATP, the quenched fluorescence is recovered significantly, and ATP can be detected in a wide range of 5-2500μM with a detection limit of 2μM and good selectivity. Moreover, when the GO-based MAB was used in cellular ATP assays, preeminent fluorescence signals were obtained, thus the platform of GO-based MAB could be used to detect ATP in real-world samples.     

Detection of C677T mutation of MTHFR in subject with coronary heart disease by hairpin probe with enzymatic color on microarray

Molecular beacon (MB) is especially suited for detection of single nucleotide polymorphism (SNP), and the type of MB immobilized on the surface of microarray in particular, may detect multi-sample and multi-locus. However, the majority of MB needs to be labeled with fluorescence and quenching molecules on the two ends of the probe, and observed the reaction of fluorescence or complicated electrochemical signal produced hybridization of MB and target sequence by complex and expensive instruments. The "molecular beacon" and microarray designed appropriately in our study can produce visible light response signal induced by amplification effect of enzymatic color, and are avoided with the marker of fluorescence and quenching molecules and expensive instruments. The "molecular beacon" without fluorescence and quenching molecules is entitled as "hairpin DNA probe" by us for only the "hairpin" structure of traditional molecular beacon is adopted. The merits of two techniques, molecular beacon and amplification effect of enzymatic color, are successfully combined, and the technique is simple, sensitive and specific, to detect and compare the methylenetetrahydrofolate reductase (MTHFR) Gene C677T mutation of subjects between coronary heart disease (CHD) and control group. The results showed that MTHFR Gene C677T polymorphism is an independent risk factor for CHD.     

rkDNA–graphene oxide as a simple probe for the rapid detection of miRNA21

In this study we developed a novel diagnostic tool for the detection of miRNA21, based on the fluorescent nucleotide morpholine naphthalimide deoxyuridine (dUrkTP). We incorporated dUrkTP into DNA through primer extension to obtain rkDNA displaying high fluorescence. We then used lambda exonuclease, a specific nuclease for 3́-monophosphate–containing DNA, to separate rkDNA from its complementary sequence. The fluorescence of the free rkDNA was quenched dramatically upon interacting with graphene oxide (GO). Our rkDNA–GO fluorescence probing system exhibited high sensitivity and selectivity for the detection of miRNA21. This inexpensive probing system, employing simple primer extension and exonuclease degradation, required only 30 min to detect its target miRNA. This strategy appears suitable for the detection of diverse types of miRNA.     

An exonuclease III and graphene oxide-aided assay for DNA detection

We have developed a novel DNA assay based on exonuclease III (ExoIII)-induced target recycling and the fluorescence quenching ability of graphene oxide (GO). This assay consists of a linear DNA probe labeled with a fluorophore in the middle. Introduction of target sequence induces the exonuclease III catalyzed probe digestion and generation of single nucleotides. After each cycle of digestion, the target is recycled to realize the amplification. Finally, graphene oxide is added to quench the remaining probes and the signal from the resulting fluorophore labeled single nucleotides is detected. With this approach, a sub-picomolar detection limit can be achieved within 40 min at 37°C. The method was successfully applied to multicolor DNA detection and the analysis of telomerase activity in extracts from cancer cells.     

Comparison of the direct electrochemistry of glucose oxidase immobilized on the surface of Au, CdS and ZnS nanostructures

A novel fluorescence biosensing strategy for simple, rapid and sensitive selecting quadruplex-binding ligands was reported by using graphene oxide (GO) as the fluorescence quencher. Data from transmission electron microscopy (TEM), atomic force microscopy (AFM) image, Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy demonstrated that single-layered GO sheets were successfully prepared with well dispersion in aqueous solution. The fluorescein amidite (FAM)-labeled signal probe first adsorbed onto the surface of GO through π-stacking interaction between the ring structure in the nucleobases and the hexagonal cells of GO, and the fluorescence of the dye was quenched. When the quadruplex-binding ligands were introduced, the signal probe folded to form intramolecular G-quadruplex structure, which led to the releasing of FAM-labeled signal probe from the surface of GO and the fluorescence intensity recovered. Three series of Chinese medicine monomers were investigated by the proposed method, and the flavonoids were demonstrated to be the potential quadruplex-binding ligands by fluorescence measurement and melting temperature analysis. The results indicated that this strategy offers a simple, rapid and sensitive method for screening G-quadruplex ligands and it could find wide applications in the discovery of new antitumor drugs.     

DNA bioassays based on the fluorescence ‘turn off’ of silver nanocluster beacon

Recognition and quantification of oligonucleotide sequences play important roles in medical diagnosis. In this study, a new fluorescent oligonucleotide‐stabilized silver nanocluster beacon (NCB) probe was designed for sensitive detection of oligonucleotide sequence targets. This probe contained two tailored DNA strands. One strand was a signal probe strand containing a cytosine‐rich strand template for fluorescent silver nanocluster (Ag NC) synthesis and a detection sections at each end. The other strand was a fluorescence enhancing strand containing a guanine‐rich section for signal enhancement at one end and a linker section complementary to one end of the signal probe strand. After synthesis of the Ag NCs and hybridization of the two strands, the fluorescence intensity of the as‐prepared silver NCB was enhanced 200‐fold compared with the Ag NCs. Two NCBs were designed to detect two disease‐related oligonucleotide sequences, and results indicated that the two target oligonucleotide sequences in the range 50.0–600.0 and 50.0–200.0 nM could be linearly detected with detection limits of 20 and 25 nM, respectively. The developed fluorescence method using NCBs for oligonucleotide sequence detection was sensitive, facile and had potential for use in bioanalysis and diagnosis.     

A "turn-on" fluorescent copper biosensor based on DNA cleavage-dependent graphene-quenched DNAzyme

A novel and promising "turn-on" fluorescent Cu(2+) biosensor is designed based on graphene-DNAzyme catalytic beacon. Due to the essential surface and quenching properties of two-dimensional graphene, it can function as both "scaffold" and "quencher" of the Cu(2+)-dependent DNAzyme, facilitating the formation of self-assembled graphene-quenched DNAzyme complex. However, Cu(2+)-induced catalytic reaction disturbs the graphene-DNAzyme conformation, which will produce internal DNA cleavage-dependent effect. In this case, the quenched fluorescence in graphene-DNAzyme is quickly recovered to a large extent in 15 min. Compared with common DNAzyme-based sensors, the presented graphene-based catalytic beacon greatly improves the signal-to-background ratio, hence increasing the sensitivity (LOD=0.365 nM). Furthermore, the controllable DNA cleavage reaction provides an original and alternative internal method to regulate the interaction between graphene and DNA relative to the previous external sequence-specific hybridization-dependent regulation, which will open new opportunities for nucleic studies and sensing applications in the future.     

miRNA profiling of granulosa cell-derived exosomes reveals their role in promoting follicle development

To explore whether granulosa cell (GC)-derived exosomes (GC-Exos) and follicular fluid-derived exosomes (FF-Exos) have functional similarities in follicle development and to establish relevant experiments to validate whether GC-Exos could serve as a potential substitute for follicular fluid-derived exosomes to improve folliculogenesis. GC-Exos were characterized. MicroRNA (miRNA) profiles of exosomes from human GCs and follicular fluid were analyzed in depth. The signature was associated with folliculogenesis, such as phosphatidylinositol 3 kinases-protein kinase B signal pathway, mammalian target of rapamycin signal pathway, mitogen-activated protein kinase signal pathway, Wnt signal pathway, and cyclic adenosine monophosphate signal pathway. A total of five prominent miRNAs were found to regulate the above five signaling pathways. These miRNAs include miRNA-486-5p, miRNA-10b-5p, miRNA-100-5p, miRNA-99a-5p, and miRNA-21-5p. The exosomes from GCs and follicular fluid were investigated to explore the effect on folliculogenesis by injecting exosomes into older mice. The proportion of follicles at each stage is counted to help us understand folliculogenesis. Exosomes derived from GCs were isolated successfully. miRNA profiles demonstrated a remarkable overlap between the miRNA profiles of FF-Exos and GC-Exos. The shared miRNA signature exhibited a positive influence on follicle development and activation. Furthermore, exosomes derived from GCs and follicular fluid promoted folliculogenesis in older female mice. Exosomes derived from GCs had similar miRNA profiles and follicle-promoting functions as follicular fluid exosomes. Consequently, GC-Exos are promising for replacing FF-Exos and developing new commercial reagents to improve female fertility.     

Green synthesis of graphene oxide sheets decorated by silver nanoprisms and their anti-bacterial properties

A widely soluble graphene oxide sheets decorated by silver nanoprisms were prepared through green synthesis at the room temperature using gelatin as reducing and stabilizing agent. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy and fluorescence spectra. The results demonstrate that these silver-nanoprisms assembled on graphene oxide sheets are flexible and can form stable suspensions in aqueous solutions. Furthermore, the formation mechanism of soluble graphene oxide sheets decorated by silver nanoprisms was successfully explained. The anti-bacterial properties of graphene oxide sheets decorated by silver nanoprisms were tested against Escherichia coli. This work provides a simple and “green” method for the synthesis of graphene oxide sheets decorated by silver nanoprisms in aqueous solution with promising antibacterial property.     

An ultrasensitive fluorescent aptasensor for adenosine detection based on exonuclease III assisted signal amplification

We report here a graphene oxide (GO)-based fluorescent aptasensor for adenosine detection by employing exonuclease III (Exo III) as a signal amplifying element. In the absence of adenosine, the adenosine aptamers hybridized with the complementary DNA (cDNA), and the Exo III could not cleave the single-strand signal probes labeled with carboxylfluorescein (FAM) at its 5' ends. When the graphene oxide was finally added, it could strongly adsorb the single-strand signal probes and quenched the fluorophore effectively. In the presence of adenosine, the aptamers associated with the targets, which led to the formation of duplex DNAs between the cDNAs and the signal probes. The Exo III thereafter could digest the duplex DNAs from 3' blunt terminus of signal probes, liberating the fluorophore. Upon adding the GO, the fluorophore could not be adsorbed and quenched. By coupling cyclic enzymatic cleavage, a remarkable fluorescent increase was obtained. Due to the specific recognition ability of the aptamer for the target and the powerful quenching property of GO for signal probe, this proposed approach has a good selectivity and high sensitivity for adenosine. In the optimum conditions described, >100% signal enhancement was achieved and a limit of detection as low as 1 nM was obtained, which is lower than those of commonly used fluorescent aptamer sensors. Moreover, the biosensor exhibited an ultrahigh sensitivity and held a versatile platform for clinical diagnostics, molecular biology and drug developments.     

Bis-pyrene-labeled molecular beacon: a monomer-excimer switching probe for the detection of DNA base alteration

A new bis-pyrene-labeled oligonucleotide probe (BP-probe) has been designed for the detection of a single base mismatch in single strand (ss) DNA as a target. The sequence of BP-probe was chosen to form stem-loop structure similar to a molecular beacon (MB-probe), yielding bis-pyrene-labeled molecular beacon (BP-MB-probe). Partially double stranded (ds) BP-MB-probes were prepared by complexation with oligonucleotides whose sequences are complementary to the loop segment but not to the stem and exchangeable with the target DNA. The partially ds BP-MB-probes were shown to exhibit monomer fluorescence as major fluorescence, while the ss BP-MB-probe in the stem-loop form displays strong excimer fluorescence. The strand exchange reactions between partially ds BP-MB-probe and target ss DNA in the presence of cationic comb-type copolymer as a catalyst were monitored by the excimer fluorescence changes. The existence of a mismatched base can be determined by the slower PASE rates compared with fully matched DNA.     

Suppression of tumorigenicity by MicroRNA-138 through inhibition of EZH2-CDK4/6-pRb-E2F1 signal loop in glioblastoma multiforme

Deregulation of microRNAs (miRNAs) is implicated in tumor progression. We attempt to indentify the tumor suppressive miRNA not only down-regulated in glioblastoma multiforme (GBM) but also potent to inhibit the oncogene EZH2, and then investigate the biological function and pathophysiologic role of the candidate miRNA in GBM. In this study, we show that miRNA-138 is reduced in both GBM clinical specimens and cell lines, and is effective to inhibit EZH2 expression. Moreover, high levels of miR-138 are associated with long overall and progression-free survival of GBM patients from The Cancer Genome Atlas dataset (TCGA) data portal. Ectopic expression of miRNA-138 effectively inhibits GBM cell proliferation in vitro and tumorigenicity in vivo through inducing cell cycles G1/S arrest. Mechanism investigation reveals that miRNA-138 acquires tumor inhibition through directly targeting EZH2, CDK6, E2F2 and E2F3. Moreover, an EZH2-mediated signal loop, EZH2-CDK4/6-pRb-E2F1, is probably involved in GBM tumorigenicity, and this loop can be blocked by miRNA-138. Additionally, miRNA-138 negatively correlates to mRNA levels of EZH2 and CDK6 among GBM clinical samples from both TCGA and our small amount datasets. In conclusion, our data demonstrate a tumor suppressive role of miRNA-138 in GBM tumorigenicity, suggesting a potential application in GBM therapy.     

Nanographite‐based fluorescent biosensor for detecting microRNA using duplex‐specific nuclease‐assisted recycling

The development of a nanographite (NG)‐based fluorescent biosensor for detecting microRNA (miRNA) is reported. Duplex‐specific nuclease (DSN)‐assisted signal amplification was key to its function. In the absence of a target, with the assistance of p‐stacking interactions, the NG adsorbed the double carboxyfluorescein (FAM)‐labelled probe (DFP) whose surface was perfectly complementary to miRNA, leading to quenching of FAM fluorescence. In the presence of a target, double‐stranded DNA/RNA hybrids were repelled by the NG and fluorescence was restored. Meanwhile, the considerable increase in signal strength and sensitivity suggests DSN‐mediated target recycling as an application. The detection limit of the proposed biosensor for miRNA was 10 pmol/L; there was a linear correlation when the miRNA concentration ranged from 50 pmol/L to 5 nmol/L. Additionally, the method could distinguish let‐7b from most let‐7 miRNA family members and was successfully used in a sample assay. This biosensor is a novel and highly sensitive tool for miRNA detection and has great potential for biochemical research, disease diagnosis, and therapy.     

A molecular beacon DNA microarray system for rapid detection of E. coli O157:H7 that eliminates the risk of a false negative signal

A DNA hybridization based optical detection platform for the detection of foodborne pathogens has been developed with virtually zero probability of the false negative signal. This portable, low-cost and real-time assaying detection platform utilizes the color changing molecular beacon as a probe for the optical detection of the target sequence. The computer-controlled detection platform exploits the target hybridization induced change of fluorescence color due to the F?rster (fluorescence) resonance energy transfer (FRET) between a pair of spectrally shifted fluorophores conjugated to the opposite ends of a beacon (oligonucleotide probe). Unlike the traditional fluorophore-quencher beacon design, the presence of two fluorescence molecules allows to actively visualize both hybridized and unhybridized states of the beacon. This eliminates false negative signal detection characteristic for the fluorophore-quencher beacon where bleaching of the fluorophore or washout of a beacon is indistinguishable from the absence of the target DNA sequence. In perspective, the two-color design allows also to quantify the concentration of the target DNA in a sample down to < =1 ng/microl. The new design is suitable for simultaneous reliable detection of hundreds of DNA target sequences in one test run using a series of beacons immobilized on a single substrate in a spatial format.