Analyzing the Environmental Benefits of Industrial Symbiosis

Studies of industrial symbiosis (IS) focus on the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are shared or exchanged among the actors of the system, thereby reducing the consumption of virgin material and energy inputs, and likewise the generation of waste and emissions. In this study, the environmental impacts of an industrial ecosystem centered around a pulp and paper mill and operating as an IS are analyzed using life cycle assessment (LCA). The system is compared with two hypothetical reference systems in which the actors would operate in isolation. Moreover, the system is analyzed further in order to identify possibilities for additional links between the actors. The results show that of the total life cycle impacts of the system, upstream processes made the greatest overall contribution to the results. Comparison with stand‐alone production shows that in the case studied, the industrial symbiosis results in modest improvements, 5% to 20% in most impact categories, in the overall environmental impacts of the system. Most of the benefits occur upstream through heat and electricity production for the local town. All in all it is recommended that when the environmental impacts of industrial symbiosis are assessed, the impacts occurring upstream should also be studied, not only the impacts within the ecosystem.     

Application of Markov Chain Model to Calculate the Average Number of Times of Use of a Material in Society. An Allocation Methodology for Open-Loop Recycling. Part 1: Methodology Development (7 pp)

- Preamble. In this series of two papers, a methodology to calculate the average number of times a material is used in a society from cradle to grave is presented and applied to allocation of environmental impact of virgin material. Part 1 focuses on methodology development and shows how the methodology works with hypothetical examples of material flows. Part 2 presents case studies for steel recycling in Japan, in which the methodology is applied and allocation of environmental impact of virgin steel is conducted. - Abstract Goal, Scope and Background. It has been recognized that LCA has a limitation in assessing open cycle recycling of materials because of inevitable subjective judgments in setting system boundary. According with the enforcement of recycling laws, there has been a rapid increase in recycling ratio of materials at the end-of-life of products in many industrialized countries. So, materials' life cycle is getting more complicated, which makes it difficult to quantify the environmental impacts of materials used in a product in an appropriate way. The purpose of this paper is to develop a methodology to calculate the average number of times a material is used in a society from cradle to grave. The method developed in this paper derives the average number of times material is used; this value could be used for allocation of environmental burdens of virgin material as well as an indicator for assessing the state of material use in a certain year, based on material flow of material in that year. Main Features Our methodology is based on Markov chain model using matrix-based numerical analysis. A major feature of this method is that it creates transition probability matrices for a material from the way in which the material is produced, consumed, and recycled, making it possible to simply elicit indicators that assess the status of material use in products in society. Our methodology could be an alternative method to derive the average number of times material is used, which could be used for allocation of environmental burdens of virgin material. Results and Discussions The methodology was applied to hypothetical examples of material flows, in which a virgin material was produced and used in products, recycled and finally landfilled. In some cases, closed loop and open loop recycling of materials existed. The transition probability matrix was created for each material flow, and how many times a virgin material is used in products until all of the elements are ultimately landfilled. Conclusions This methodology is applicable to a complicated material flow if the status of residence of a material and its flow in a society can be figured out. All the necessary data are the amount of virgin material production, amount of the material used in products, recycling rate of the material at the end of life of each product, the amount of scrap of the material that are used for products. In Part 2 of this paper, case studies for steel were conducted.     

Material and Energy Flows and Environmental Impacts of the Internet in Switzerland

The Internet leads to material and energy consumption as well as various environmental impacts on both the regional and global scale. Yet, assessments of the Internet's energy consumption and resulting greenhouse gas emissions are still rare, and assessments of material flows and further environmental impacts are virtually non‐existent. This article investigates material flows, the direct energy consumption during the use phase, as well as environmental impacts linked to the service, “Internet in Switzerland.” In our model, the service, Internet in Switzerland, is divided into various Internet participant categories. All devices used to access or provide Internet services are merged in a limited number of equipment families and, as such, included in an inventory of the existing infrastructure (stock). Based on this inventory, a material flow analysis (MFA) is performed, which includes the current stock as well as flows resulting from growth and disposal. The direct energy consumption for the operation of the infrastructure is quantified. Environmental impacts are calculated with a life cycle assessment approach, using the ecoinvent database and the software, SimaPro, applying four different methods. The MFA results in a 2009 stock of 98,100 tonnes. Approximately 4,130 gigawatt hours per year, or 7% of the total Swiss electricity consumption, were used in 2009 to operate the Swiss infrastructure. The environmental impacts caused during the production and use phases vary significantly depending on the assessment method chosen. The disposal phase had mainly positive impacts as a result of material recovery.     

Consumption‐based Material Flow Accounting

In 2007, imports accounted for approximately 34% of the material input (domestic extraction and imports) into the Austrian economy and almost 60% of the GDP stemmed from exports. Upstream material inputs into the production of traded goods, however, are not yet included in the standard framework of material flow accounting (MFA). We have reviewed different approaches accounting for these upstream material inputs, or raw material equivalents (RME), positioning them in a wider debate about consumption‐based perspectives in environmental accounting. For the period 1995–2007, we calculated annual RME of Austria's trade and consumption applying a hybrid approach. For exports and competitive imports, we used an environmentally extended input‐output model of the Austrian economy, based on annual supply and use tables and MFA data. For noncompetitive imports, coefficients for upstream material inputs were extracted from life cycle inventories. The RME of Austria's imports and exports were approximately three times larger than the trade flows themselves. In 2007, Austria's raw material consumption was 30 million tonnes or 15% higher than its domestic material consumption. We discuss the material composition of these flows and their temporal dynamics. Our results demonstrate the need for a consumption‐based perspective in MFA to provide robust indicators for dematerialization and resource efficiency analysis of open economies.     

Evaluation of Life Cycle Assessment Recycling Allocation Methods

Life cycle assessment practitioners struggle to accurately allocate environmental burdens of metals recycling, including the temporal dimension of environmental impacts. We analyze four approaches for calculating aluminum greenhouse gas emissions: the recycled content (RC) or cut‐off approach, which assumes that demand for recycled content displaces primary production; end‐of‐life recycling (EOLR), which assumes that postuse recycling displaces primary production; market‐based (MB) approaches, which estimate changes in supply and demand using price elasticities; and value‐corrected substitution (VCS), which allocates impact based on price differences between primary and recycled material. Our analysis suggests that applications of the VCS approach do not adequately account for the changing scrap to virgin material price ratio over time, whereas MB approaches do not address stock accumulation and depletion. The EOLR and RC approaches were analyzed using two case studies: U.S. aluminum beverage cans and vehicle engine blocks. These approaches produced similar results for beverage cans, which have a closed material loop system and a short product life. With longer product lifetimes, as noted with the engine blocks, the magnitude and timing of the emissions differs greatly between the RC and EOLR approaches. The EOLR approach indicates increased impacts at the time of production, offset by negative impacts in future years, whereas the RC approach assumes benefits to increased recycled content at the time of production. For vehicle engine blocks, emissions using EOLR are 140% higher than with RC. Results are highly sensitive to recycled content and future recycling rates, and the choice of allocation methods can have significant implications for life cycle studies.     

Anthropogenic Carbon Stock Dynamics of Pulp and Paper Products in Germany

Carbon‐based materials (CBMs) for energetic and material purposes combine biogenic and anthropogenic carbon cycles. In the latter, numerous manufactured products with various in‐use lifespans accumulate as anthropogenic carbon stocks. Understanding the behavior of these stocks is an important requirement to estimate not only future waste amounts, source for secondary raw materials, but also the impacts and effects in carbon emissions and carbon management. Previous models have estimated material stock changes; however, a lack of research in carbon stocks is perceived. Moreover, studies follow in‐use lifespan estimation approaches, such as decay functions, which do not coincide with observed consumption and waste treatment patterns. In the first part of this article, we present a carbon stock‐flow model to analyze inter‐relationships between carbon flows and stocks from raw materials to waste treatment processes considering a consumer perspective, where the dynamics of anthropogenic carbon stocks are completely described. In the second part, we study the pulp and paper industry in Germany under a scenario approach to analyze the behavior, development, and impacts of paper stocks and flows between 2010 and 2040. The model provided coherent results, with industrial data estimating 33.9 million metric tons in 2010 in paper stocks, equivalent to 410 kilograms per person. Consumption per capita and in‐use lifespan of products were identified as the most significant variables in carbon stock building. Model simulations show a sustained growth in stocks for the next 30 years, with increase in waste and carbon emissions. But in combination with recycling and reuse mechanisms and consumption patterns, environmental impacts are reduced.     

Energy Intensity of the Catalan Construction Sector

We used a thermodynamic framework to characterize the resource consumption of the construction sector in 2001 in Catalonia, the northeast region of Spain. The analysis was done with a cradle‐to‐product life cycle approach using material flow analysis (MFA) and exergy accounting methodologies to quantify the total material and energy inputs in the sector. The aim was to identify the limitations of resource metabolism in the sector and to pinpoint the opportunities for improved material selection criteria, processing, reuse, and recycling for sustainable resource use. The results obtained from MFA showed that nonrenewables such as minerals and natural rocks, cement and derivatives, ceramics, glass, metals, plastics, paints and other chemicals, electric and lighting products, and bituminous mix products accounted for more than 98% of the input materials in the construction sector. The exergy analysis quantified a total 113.1 petajoules (PJ) of exergy inputs in the sector; utilities accounted for 57% of this exergy. Besides exergy inputs, a total of 6.85 million metric tons of construction and demolition waste was generated in 2001. With a recycling rate of 6.5%, the sector recovered 1.3 PJ of exergy. If the sector were able to recycle 80% of construction and demolition waste, then exergy recovery would be 10.3 PJ. Hence the results of this analysis indicate that improvements are required in manufacturing processes and recycling activities, especially of energy‐intensive materials, in order to reduce the inputs of utilities and the extraction of primary materials from the environment.     

Life cycle assessment of printing and writing paper produced in Portugal

Goal, Scope and Background The environmental sustainability is one of the current priorities of the Portuguese pulp and paper industry. Life Cycle Assessment (LCA) was the methodology chosen to evaluate the sustainability of the printing and writing paper production activity. This paper grade represents about 60% of the total production of paper in Portugal and its production is expected to increase in the near future. The main goal of this study was to assess the potential environmental impacts associated with the entire life cycle of the printing and writing paper produced in Portugal from Eucalyptus globulus pulp and consumed in Germany, in order to identify the processes with the largest environmental impacts. Another goal of this study was to evaluate the effect on the potential environmental impacts of changing the market where the Portuguese printing and writing paper is consumed: German market vs. Portuguese market. Methods The main stages considered in this study were: forestry, pulp production, paper production, paper distribution, and paper final disposal. Transports and production of chemicals, fuels and energy in the grid were also included in these stages. Whenever possible and feasible, average or typical data from industry were collected. The remaining data were obtained from the literature and specialised databases. A quantitative impact assessment was performed for five impact categories: global warming over 100 years, acidification, eutrophication, non-renewable resource depletion and photochemical oxidant formation. Results In the German market scenario, the paper production stage was a remarkable hot spot for air emissions (non-renewable CO₂, NO_x and SO₂) and for non-renewable energy consumption, and, consequently, for the impact categories that consider these parameters: global warming, acidification and non-renewable resource depletion. These important environmental impacts are due to the energy requirements in the printing and writing paper production process, which are fulfilled by on-site fuel oil burning and consumption of electricity from the national grid, which is mostly based on the use of fossil fuels. The pulp production stage was identified as the largest contributor to water emissions (COD and AOX) and to eutrophication. Considering that energy consumed by the pulp production processes comes from renewable fuels, this stage was also the most contributing to renewable energy consumption. Discussion The paper distribution stage showed an important contribution to NO_x emissions, which, however, did not result in a major contribution to acidification or eutrophication. The final disposal stage was the main contributor to the photochemical oxidant formation potential due to CH₄ emissions from wastepaper landfilling. On the other hand, paper consumption in Portugal was environmentally more favourable than in Germany for the parameters/impact categories where the paper distribution stage has a significant contribution (non-renewable CO₂, NO_x, non-renewable energy consumption, acidification, eutrophication and non-renewable resource depletion) due to shorter distances needed to deliver paper to the consumers. For the remaining parameters/impact categories, the increase observed in the final disposal stage in the Portuguese market was preponderant, and resulted from the existence of significant differences in the final disposal alternatives in the analysed markets (recycling dominates in Germany, whereas landfilling dominates in Portugal). Conclusions The pulp and paper production stages were found to be of significance for almost all of the inventory parameters as well as for the impact assessment categories. The paper distribution and the final disposal stages were only of importance for some of the inventory parameters and some of the impact categories. The forestry stage played a minor role in the environmental impacts generated during the paper life cycle. The consumption of paper in Portugal led to a decrease in the environmental burdens of the paper distribution stage, but to an increase in the environmental burdens of the final disposal stage, when compared with the consumption of paper in Germany. Recommendations and Perspectives This study provides useful information that can assist the pulp and paper industry in the planning of future investments leading to an increase in its sustainability. The results of inventory analysis and impact assessment show the processes that play an important role in each impact category, which allow the industry to improve its environmental performance, making changes not only in the production process itself, but also in the treatment of flue gases and liquid effluents. Besides that concern regarding pollution prevention, other issues with relevance to the context of sustainability, such as the energy consumption, can also be dealt with.     

Material Recycling and the Myth of Landfill Diversion

Proponents of material recycling typically point to two environmental benefits: disposal (landfill/incinerator) reduction and primary production displacement. However, in this paper we mathematically demonstrate that, without displacement, recycling can delay but not prevent any existing end‐of‐life material from reaching final disposal. The only way to reduce the amount of material ultimately landfilled or incinerated is to produce less in the first place; material that is not made needs not be disposed. Recycling has the potential to reduce the amount of material reaching end of life solely by reducing primary production. Therefore, the “dual benefits” of recycling are in fact one, and the environmental benefit of material recycling rests in its potential to displace primary production. However, displacement of primary production from increased recycling is driven by market forces and is not guaranteed. Improperly assuming all recycled material avoids disposal underestimates the environmental impacts of the product system. We show that the potential magnitude of this error is substantial, though for inert recyclables it is lower than the error introduced by improperly assuming all recycled material displaces primary material production. We argue that life cycle assessment end‐of‐life models need to be updated so as not to overstate the benefits of recycling. Furthermore, scholars and policy makers should focus on finding and implementing ways to increase the displacement potential of recyclable materials rather than focusing on disposal diversion targets.     

Quantifying environmental impacts of primary aluminum ingot production and consumption : A trade‐linked multilevel life cycle assessment

Aluminum is one of the most used metals of modern civilization, but its production is responsible for multiple adverse environmental impacts mostly due to aluminum smelting and alumina refining. Previous life cycle assessments (LCAs) have aggregated alumina refining into a single global process even though refining processes are highly spatially differentiated and alumina is highly traded. Our work improves on existing LCAs of primary aluminum by including temporal and spatial differentiation in alumina refining and aluminum smelting and trade of alumina and primary aluminum ingots. We build country‐level impact factors for primary aluminum ingot production and consumption, with the spatial distributions of environmental impacts, from 2000 to 2017, by combining a trade‐linked multilevel material flow analysis with LCA using six midpoint categories of the ReCiPe method. Climate change impacts of primary aluminum production range from 4.5 to 33.6 kg CO₂ eq./kg. We then estimate the life cycle production‐ and consumption‐based environmental burdens of primary aluminum ingot by country. High spatial variations exist among impact factors of primary aluminum production. Aggregating the alumina refining processes into a single process may cause important deviations on the impact factors of primary aluminum ingot production (up to 38% differences in climate change impacts). Finally, we estimate the climate change impacts of worldwide primary aluminum production at 1.2 Gt CO₂ eq. in 2017 and untangle their spatial origins, localized at 70% in China. Overall, we show the importance of spatial differentiation for highly traded products that rely on highly traded inputs and offer recommendations for LCA practitioners. This article met the requirements for a gold‐gold JIE data openness badge described at http://jie.click/badges .     

Rationale for and Interpretation of Economy-Wide Materials Flow Analysis and Derived Indicators

Economy-wide material flow analysis (MFA) and derived indicators have been developed to monitor and assess the metabolic performance of economies, that is, with respect to the internal economic flows and the exchange of materials with the environment and with other economies. Indicators such as direct material input (DMI) and direct material consumption (DMC) measure material use related to either production or consumption. Domestic hidden flows (HF) account for unused domestic extraction, and foreign HF represent the upstream primary resource requirements of the imports. DMI and domestic and foreign HF account for the total material requirement (TMR) of an economy. Subtracting the exports and their HF provides the total material consumption (TMC).
DMI and TMR are used to measure the (de-) coupling of resource use and economic growth, providing the basis for resource efficiency indicators. Accounting for TMR allows detection of shifts from domestic to foreign resource requirements. Net addition to stock (NAS) measures the physical growth of an economy. It indicates the distance from flow equilibrium of inputs and outputs that may be regarded as a necessary condition of a sustainable mature metabolism.
We discuss the extent to which MFA-based indicators can also be used to assess the environmental performance. For that purpose we consider different impacts of material flows, and different scales and perspectives of the analysis, and distinguish between turnover-based indicators of generic environmental pressure and impact-based indicators of specific environmental pressure. Indicators such as TMR and TMC are regarded as generic pressure indicators that may not be used to indicate specific environmental impacts. The TMR of industrial countries is discussed with respect to the question of whether volume and composition may be regarded as unsustainable.     

Towards a Circular Economy in Australian Agri‐food Industry: An Application of Input‐Output Oriented Approaches for Analyzing Resource Efficiency and Competitiveness Potential

The food industry in Australia (agriculture and manufacturing) plays a fundamental role in contributing to socioeconomic sectors nationally. However, alongside the benefits, the industry also produces environmental burdens associated with the production of food. Sectorally, agriculture is the largest consumer of water. Additionally, land degradation, greenhouse gas emissions, energy consumption, and waste generation are considered the main environmental impacts caused by the industry. The research project aims to evaluate the eco‐efficiency performance of various subsectors in the Australian agri‐food systems through the use of input‐output–oriented approaches of data envelopment analysis and material flow analysis. This helps in establishing environmental and economic indicators for the industry. The results have shown inefficiencies during the life cycle of food production in Australia. Following the principles of industrial ecology, the study recommends the implementation of sustainable processes to increase efficiency, diminish undesirable outputs, and decrease the use of nonrenewable inputs within the production cycle. Broadly, the research outcomes are useful to inform decision makers about the advantages of moving from a traditional linear system to a circular production system, where a sustainable and efficient circular economy could be created in the Australian food industry.     

Combining Material Flow Analysis,Life Cycle Assessment,and Multiattribute Utility Theory

Three assessment methods, material flow analysis (MFA), life cycle analysis (LCA), and multiattribute utility theory (MAUT) are systematically combined for supporting the choice of best end‐of‐life scenarios for polyethylene terephthalate (PET) waste in a municipality of a developing country. MFA analyzes the material and energy balance of a firm, a region, or a nation, identifying the most relevant processes; LCA evaluates multiple environmental impacts of a product or a service from cradle to grave; and MAUT allows for inclusion of other aspects along with the ecological ones in the assessment. We first systematically coupled MFA and LCA by defining “the service offered by the total PET used during one year in the region” as the functional unit. Inventory and impacts were calculated by multiplying MFA flows with LCA impacts per kilogram. We used MAUT to include social and economic aspects in the assessment. To integrate the subjective point of view of stakeholders in the MAUT, we normalized the environmental, social, and economic variables with respect to the magnitude of overall impacts or benefits in the country. The results show large benefits for recycling scenarios from all points of view and also provide information about waste treatment optimization. The combination of the three assessment methods offers a powerful integrative assessment of impacts and benefits. Further research should focus on data collection methods to easily determine relevant material flows. LCA impact factors specific to Colombia should be developed, as well as more reliable social indicators.     

Materials Flow Accounting in Sweden Material Use for National Consumption and for Export

This article presents Swedish economy‐wide material flow accounts for the period 1987‐1998. It also shows possibilities for enhancing the international comparability of aggregated data on material use, by distinguishing between materials used for consumption and export purposes. The direct material input (DMI) is used as an aggregate measure to estimate the amounts of natural resources (except water and air) that are taken from nature into the economy within a year, including imports to and production within the region in question. The division of materials used for consumption and export purposes avoids double counting trade flows when DMI is applied to a group of countries. The annual DMI in Sweden for 1997‐1998, including production and imports, amounts to 24 to 27 metric tons per capita (t/c). The fossil fuel input varies only slightly over the period, from 3.2 t/c in 1991 to 3.6 t/c in 1996, a level deemed unsustainable by the Swedish Environmental Protection Agency. The input of renewable raw materials varies between 8 and 9 t/c. Ores and minerals vary between 11 and 15 t/c. The DMI puts Sweden above estimates made for Germany, the United States, and Japan and in the same range as the Netherlands. The differences in these values can mainly be explained by the relative importance of exports as compared to the size of the economy and by the variation in system boundaries for the data on natural resources. The system boundaries and data sources for natural resources need to be further defined to make the measures fully comparable. Around 5 t/c is exported, whereas the rest, around 20 t/c, is national consumption. The aggregate direct material consumption (DMC), which is the DMI minus exports, communicates the magnitude of resource use. Comparisons of the input with solid waste statistics indicate that quantity of waste (excluding mining waste) in Sweden is equal to about 10% relative of the total resource use. Material collected for recycling by the waste management system is equal to about 5% of the amount of virgin resources brought into society each year.     

Computation of Operational and Environmental Benchmarks Within Selected Galician Fishing Fleets

Increasing the eco‐efficiency of fishing fleets is currently a major target issue in the seafood sector. This objective has been influenced in recent years by soaring fuel prices, a fact particularly relevant to a sector whose vessels present high energy consumption rates. Efforts to minimize fuel consumption in fishing fleets result in economic benefits and also in important reductions regarding environmental impacts. In this article, we combine life cycle assessment (LCA) and data envelopment analysis (DEA) to jointly discuss the operational and environmental performances of a set of multiple, similar entities. We applied the “five‐step LCA + DEA method” to a wide range of vessels for selected Galician fisheries, including deep‐sea, offshore, and coastal fleets. The environmental consequences of operational inefficiencies were quantified and target performance values benchmarked for inefficient vessels. We assessed the potential environmental performance of target vessels to verify eco‐efficiency criteria (lower input consumption levels, lower environmental impacts). Results revealed the strong dependence of environmental impacts on one major operational input: fuel consumption. The most intensive fuel‐consuming fleets, such as deep sea trawling, were found to entail the diesel consumption levels nearest to the efficiency values. Despite the reduced environmental contributions linked to other operational inputs, such as hull material, antifouling paint, or nets, these may contribute to substantial economic savings when minimized. Finally, given that Galicia is a major fishing region, many of the conclusions and perspectives obtained in this study may be extrapolated to other fishing fleets at the international level.     

The environmental impacts of operating an Antarctic research station

We present a life cycle assessment (LCA) of the operation of Casey Station in Antarctica. The LCA included quantifying material and energy flows, modeling of elementary flows, and subsequent environmental impacts. Environmental impacts were dominated by emissions associated with freight operations and electricity cogeneration. A participatory design approach was used to identify options to reduce environmental impacts, which included improving freight efficiency, reducing the temperature setpoint of the living quarters, and installing alternative energy systems. These options were then assessed using LCA, and have the potential to reduce environmental impacts by between 2% and 19.1%, depending on the environmental indicator.     

The Impact of Scale,Recycling Boundary,and Type of Waste on Symbiosis and Recycling

Innovative waste recycling through industrial processes such as industrial and urban symbiosis has long been practiced and recently received much attention in the field of industrial ecology, with researchers making efforts to identify key contributing factors to successful industrial symbiosis. By analyzing 88 sample recycling projects in 23 eco‐towns in Japan, this article focuses on the factors of project scale, recycling boundary, and types of waste in relationship to environmental benefits and operational performance. The results showed that larger eco‐towns achieved more savings of virgin materials and higher stability in operation. Large‐scale projects tended to locate closer to the users of recycled products than did small‐scale projects. For treating similar types of waste, projects producing recycled products for special users (e.g., feedstock to a blast furnace for iron production) tended to locate closer to the users than those not producing for special users. The type of waste had a strong effect on the savings of virgin materials and recycling boundaries, while local factors had significant impacts on operational performance. The results also showed that agglomeration did not significantly contribute to the environmental benefits or operational performance of eco‐town projects. Another finding was that national agencies were helpful for facilitating cross‐prefecture transportation and long‐distance transaction of wastes. Implications of the findings are also discussed.     

Environmental impacts of wooden,plastic, and wood-polymer composite pallet: a life cycle assessment approach

Purpose

Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials.

Methods

Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet.

Result and discussion

In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet.

Conclusions

The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

     

Maintenance and Expansion: Modeling Material Stocks and Flows for Residential Buildings and Transportation Networks in the EU25

Material stocks are an important part of the social metabolism. Owing to long service lifetimes of stocks, they not only shape resource flows during construction, but also during use, maintenance, and at the end of their useful lifetime. This makes them an important topic for sustainable development. In this work, a model of stocks and flows for nonmetallic minerals in residential buildings, roads, and railways in the EU25, from 2004 to 2009 is presented. The changing material composition of the stock is modeled using a typology of 72 residential buildings, four road and two railway types, throughout the EU25. This allows for estimating the amounts of materials in in‐use stocks of residential buildings and transportation networks, as well as input and output flows. We compare the magnitude of material demands for expansion versus those for maintenance of existing stock. Then, recycling potentials are quantitatively explored by comparing the magnitude of estimated input, waste, and recycling flows from 2004 to 2009 and in a business‐as‐usual scenario for 2020. Thereby, we assess the potential impacts of the European Waste Framework Directive, which strives for a significant increase in recycling. We find that in the EU25, consisting of highly industrialized countries, a large share of material inputs are directed at maintaining existing stocks. Proper management of existing transportation networks and residential buildings is therefore crucial for the future size of flows of nonmetallic minerals.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.