Purification and characterization of poliovirus polypeptide 3CD, a proteinase and a precursor for RNA polymerase.

A cDNA clone encoding the 3CD proteinase (3CDpro) of poliovirus type 2 (Sabin), the precursor to proteinase 3Cpro and RNA polymerase 3Dpol, was expressed in bacteria by using a T7 expression system. Site-specific mutagenesis of the 3C/3D cleavage site was performed to generate active proteolytic precursors impaired in their ability to process themselves to 3Cpro and 3Dpol. Of these mutations, the exchange of the Thr residue at the P4 position of the 3C/3D cleavage site for a Lys residue (3CDpro T181K) resulted in a mutant polypeptide exhibiting the smallest amount of autoprocessing. This mutant was purified to 86% homogeneity and used for subsequent proteolytic studies. Purified 3CDproM (M designates the cleavage site mutant 3CDpro T181K) was capable of cleaving the P1 capsid precursor, a peptide representing the 2BC cleavage site, and the 2BC precursor polypeptide. Purified 3CDproM demonstrated the same detergent sensitivity in processing experiments with the capsid precursor as was observed by using P1 and crude extracts of poliovirus-infected HeLa cell lysates. Purified 3CDproM did not have any detectable RNA polymerase activity, whereas 3Dpol, separated from 3CDproM by gel filtration in the last step of purification, did. We conclude that 3CDproM can process both structural and nonstructural precursors of the poliovirus polyprotein and that it is active against a synthetic peptide substrate. Moreover, cleavage of 3CD to 3Dpol is needed to activate the 3D RNA polymerase.     

Requirements for RNA Replication of a Poliovirus Replicon by Coxsackievirus B3 RNA Polymerase

A chimeric poliovirus type 1 (PV1) genome was constructed in which the 3D RNA polymerase (3D(pol)) coding sequences were replaced with those from coxsackievirus B3 (CVB3). No infectious virus was produced from HeLa cells transfected with the chimeric RNA. Processing of the PV1 capsid protein precursor was incomplete, presumably due to inefficient recognition of the P1 protein substrate by the chimeric 3CD proteinase containing CVB3 3D sequences. The ability of the chimeric RNA to replicate in the absence of capsid formation was measured after replacement of the P1 region with a luciferase reporter gene. No RNA synthesis was detected, despite efficient production of enzymatically active 3D(pol) from the 3D portion of the chimeric 3CD. The chimeric 3CD protein was unable to efficiently bind to the cloverleaf-like structure (CL) at the 5' end of PV1 RNA, which has been demonstrated previously to be required for viral RNA synthesis. The CVB3 3CD protein bound the PV1 CL as well as PV1 3CD. An additional chimeric PV1 RNA that contained CVB3 3CD sequences also failed to produce virus after transfection. Since processing of PV1 capsid protein precursors by the CVB3 3CD was again incomplete, a luciferase-containing replicon was also analyzed for RNA replication. The 3CD chimera replicated at 33 degrees C, but not at 37 degrees C. Replacement of the PV1 5'-terminal CL with that of CVB3 did not rescue the temperature-sensitive phenotype. Thus, there is an essential interaction(s) between 3CD and other viral P2 or P3 protein products required for efficient RNA replication which is not fully achieved between proteins from the two different members of the same virus genus.     

Determinants of the recognition of enteroviral cloverleaf RNA by coxsackievirus B3 proteinase 3C

The initiation of enteroviral positive-strand RNA synthesis requires the presence of a functional ribonucleoprotein complex containing a cloverleaf-like RNA secondary structure at the 5' end of the viral genome. Other components of the ribonucleoprotein complex are the viral 3CD proteinase (the precursor protein of the 3C proteinase and the 3D polymerase), the viral 3AB protein and the cellular poly(rC)-binding protein 2. For a molecular characterization of the RNA-binding properties of the enteroviral proteinase, the 3C proteinase of coxsackievirus B3 (CVB3) was bacterially expressed and purified. The recombinant protein is proteolytically active and forms a stable complex with in vitro-transcribed cloverleaf RNA of CVB3. The formation of stable complexes is also demonstrated with cloverleaf RNA of poliovirus (PV) 1, the first cloverleaf of bovine enterovirus (BEV) 1, and human rhinovirus (HRV) 2 but not with cloverleaf RNA of HRV14 and the second cloverleaf of BEV1. The apparent dissociation constants of the protein:RNA complexes range from approx. 1.7 to 4.6 microM. An electrophoretic mobility shift assay with subdomain D of the CVB3 cloverleaf demonstrates that this RNA is sufficient to bind the CVB3 3C proteinase. Binding assays using mutated versions of CVB3 and HRV14 cloverleaf RNAs suggest that the presence of structural features rather than a defined sequence motif of loop D are important for 3C proteinase-RNA interaction.     

Processing of Proteinase Precursors and Their Effect on Hepatitis A Virus Particle Formation

Proteolytic processing of the picornaviral polyprotein mediated by the differential action of virus-encoded proteinase(s) is pivotal to both RNA genome replication and capsid formation. Possibly to enlarge the array of viral proteins, picornaviral polyprotein processing results in intermediate and mature products which apparently have distinct functions within the viral life cycle. For hepatitis A virus (HAV), we report here on the autoproteolysis of precursor polypeptides comprising the only viral proteinase, 3C^pro, and on their role in viral particle formation. Following transient expression of a nested set of 3C^pro-containing proteins (P3, 3ABC, 3BCD, 3CD, 3BC, and 3C) in eukaryotic cells, the extent of processing was determined by analyzing the cleavage products. The 3C/3D site was more efficiently cleaved than those at the 3A/3B and 3B/3C sites, leading to the accumulation of the intermediate product 3ABC. In the absence of 3A from the precursor, cleavage at the 3B/3C site was further reduced and a switch to an alternative 3C/3D site was observed. Coexpression of various parts of P3 with the precursor of the viral structural proteins P1-2A showed that all 3C-containing intermediates cleaved P1-2A with almost equal efficiency; however, viral particles carrying the neutralizing epitope form much more readily in the presence of the complete P3 domain than with parts of it. These data support the notion that efficient liberation of structural proteins from P1-2A is necessary but not sufficient for productive HAV capsid formation and suggest that the polypeptides flanking 3C^pro promote the assembly of viral particles.     

cis-acting lesions targeted to the hydrophobic domain of a poliovirus membrane protein involved in RNA replication.

The structural requirements of the hydrophobic domain contained in poliovirus polypeptide 3AB were studied by using a molecular genetic approach in combination with an in vitro biochemical analysis. We report here the generation and analysis of deletion, insertion, and amino acid replacement mutations aimed at decreasing the hydrophobic character of the domain. Our results indicated that the hydrophobicity of this region of 3AB is necessary to maintain normal viral RNA synthesis. However, in vitro membrane association assays of the mutated proteins did not establish a direct correlation between 3AB membrane association and viral RNA synthesis. Some of the lethal mutations we engineered produced polyproteins with abnormal P2- and P3-processing capabilities due to an alteration in the normal cleavage order of the polyprotein. A detailed analysis of these mutants suggests that P2 is not the major precursor for polypeptides 2A and 2BC and that P2 protein products are derived from P2-P3-containing precursors (most likely P2-P3 or P2-3AB). Such precursors are likely to result from primary polyprotein cleavage events that initiate a proteolytic cascade not previously documented. Our results also indicated that the function provided by the hydrophobic domain of 3AB cannot be provided in trans. We discuss the implications of these results on the formation of limited-diffusion replication complexes as a means of sequestering P2- and P3-region polypeptides required for RNA synthesis and protein processing.     

Effects of mutations in poliovirus 3Dpol on RNA polymerase activity and on polyprotein cleavage.

A series of short insertion mutations was introduced into the poliovirus gene for 3Dpol at a number of different locations. When substituted for wild-type sequences in a full-length, infectious cDNA and tested for infectivity, all 3D mutants were nonviable. The mutant cDNAs were introduced into a bacterial plasmid designed to direct the expression of poliovirus 3CD, a viral protein composed of contiguous protease and RNA polymerase sequences. Bacteria transformed with these plasmids all expressed similar amounts of 3CD, and all mutant proteins cleaved themselves to generate wild-type 3Cpro and mutant 3Dpol polypeptides with approximately the same efficiency as wild-type 3CD. The released mutant 3Dpol proteins were all defective in RNA-dependent RNA polymerase activity in vitro. Uncleaved 3CD is a protease required for processing the viral capsid protein precursor, P1. In an in vitro assay of P1 cleavage activity, some of the mutant 3CD proteins expressed in Escherichia coli showed normal activity, while others were clearly inactive. Thus, alterations in the sequence and/or folding of different regions of the 3D protein have differential effects on its various activities.     

Structural domains of the poliovirus polyprotein are major determinants for proteolytic cleavage at Gln-Gly pairs

The processing of poliovirus precursor polypeptides provides a valuable system in which to study the recognition and interaction of a proteolytic enzyme with its substrates. Processing of the poliovirus polyprotein includes cleavage between 9 of 13 available glutamineglycine (Q-G) pairs by the activity of a virally encoded proteinase, 3C. In this study, we assess the importance of primary, secondary, and tertiary structural determinants in the cleavage at two Q-G pairs in the capsid protein precursor, P1. Employing site-directed mutagenesis of cDNA copies of poliovirus RNA, we have made specific alterations in regions of the P1 capsid precursor and have assayed the effect of these alterations on proteinase cleavage at the two Q-G pairs. We have also introduced additional Q-G pairs into P1 and demonstrated that the proteinase can recognize some of the inserted Q-G pairs as cleavage sites. By correlating the predicted three-dimensional structures and the processing phenotypes of several altered P1 precursors, we are able to rank the importance of determinants required for P1 processing. While a Q-G pair appears to be the primary determinant in proteinase recognition, the tertiary location of a Q-G pair in the precursor either allows or prevents processing at that pair. Our results also suggest that the proper folding of at least two of the three P1 beta-barrel structures is required for efficient proteinase cleavage at Q-G pairs.     

Myristylation of poliovirus capsid precursor P1 is required for assembly of subviral particles.

The poliovirus capsid precursor polyprotein, P1, is cotranslationally modified by the addition of myristic acid. We have examined the importance of myristylation of the P1 capsid precursor during the poliovirus assembly process by using a recently described recombinant vaccinia virus expression system which allows the independent production of the poliovirus P1 protein and the poliovirus 3CD proteinase (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991). We constructed a site-directed mutation in the poliovirus cDNA encoding an alanine at the second amino acid position of P1 in place of the glycine residue required for the myristic acid addition and isolated a recombinant vaccinia virus (VVP1myr-) that expressed a nonmyristylated form of the P1 capsid precursor. The 3CD proteinase expressed by a coinfecting vaccinia virus, VVP3, proteolytically processed the nonmyristylated precursor P1 expressed by VVP1myr-. However, the processed capsid proteins, VP0, VP3, and VP1, did not assemble into 14S or 75S subviral particles, in contrast to the VP0, VP3, and VP1 proteins derived from the myristylated P1 precursor. When cells were coinfected with VVP1myr- and poliovirus type 1, the nonmyristylated P1 precursor expressed by VVP1myr- was processed by 3CD expressed by poliovirus, and the nonmyristylated VP0-VP3-VP1 (VP0-3-1) protomers were incorporated into capsid particles and virions which sedimented through a 30% sucrose cushion. Thus, the nonmyristylated P1 precursor and VP0-3-1 protomers were not excluded from sites of virion assembly, and the assembly defects observed for the nonmyristylated protomers were overcome in the presence of myristylated capsid protomers expressed by poliovirus. We conclude that myristylation of the poliovirus P1 capsid precursor plays an important role during poliovirus assembly by facilitating the appropriate interactions required between 5S protomer subunits to form stable 14S pentamers. The results of these studies demonstrate that the independent expression of the poliovirus P1 and 3CD proteins by using recombinant vaccinia viruses provides a unique experimental tool for analyzing the dynamics of the poliovirus assembly process.     

Rescue of Defective Poliovirus RNA Replication by 3AB-Containing Precursor Polyproteins

This study demonstrates the in vitro complementation of an RNA replication-defective lesion in poliovirus RNA by providing a replicase/polymerase precursor polypeptide [P3(wt) {wild type}] in trans. The replication-defective mutation was a phenylalanine-to-histidine change (F69H) in the hydrophobic domain of the membrane-associated viral protein 3AB. RNAs encoding wild-type forms of protein 3AB or the P3 precursor polypeptide were cotranslated with full-length poliovirus RNAs containing the F69H mutation in a HeLa cell-free translation/replication assay in an attempt to trans complement the RNA replication defect exhibited by the 3AB(F69H) lesion. Unexpectedly, generation of 3AB(wt) in trans was not able to efficiently complement the defective replication complex; however, cotranslation of the large P3(wt) precursor protein allowed rescue of RNA replication. Furthermore, P3 proteins harboring mutations that resulted in either an inactive polymerase or an inactive proteinase domain displayed differential abilities to trans complement the RNA replication defect. Our results indicate that replication proteins like 3AB may need to be delivered to the poliovirus replication complex in the form of a larger 3AB-containing protein precursor prior to complex assembly rather than as the mature viral cleavage product.     

Processing of a cellular polypeptide by 3CD proteinase is required for poliovirus ribonucleoprotein complex formation.

Poliovirus interactions with host cells were investigated by studying the formation of ribonucleoprotein complexes at the 3' end of poliovirus negative-strand RNA which are presumed to be involved in viral RNA synthesis. It was previously shown that two host cell proteins with molecular masses of 36 and 38 kDa bind to the 3' end of viral negative-strand RNA at approximately 3 to 4 h after infection. We tested the hypothesis that preexisting cellular proteins are modified during the course of infection and are subsequently recruited to play a role in viral replication. It was demonstrated that the 38-kDa protein, either directly or indirectly, is the product of processing by poliovirus 3CD/3C proteinase. Only the modified 38-kDa protein, not its precursor protein, has a high affinity for binding to the 3' end of viral negative-strand RNA. This modification depends on proteolytically active proteinase, and a direct correlation between the levels of 3CD proteinase and the 38-kDa protein was demonstrated in infected tissue culture cells. The nucleotide (nt) 5-10 region (positive-strand numbers) of poliovirus negative-strand RNA is important for binding of the 38-kDa protein. Deletion of the nt 5-10 region in full-length, positive-strand RNA renders the RNA noninfectious in transfection experiments. These results suggest that poliovirus 3CD/3C proteinase processes a cellular protein which then plays an essential role during the viral life cycle.     

Poliovirus RNA synthesis utilizes an RNP complex formed around the 5'-end of viral RNA.

The structure of a ribonucleoprotein complex formed at the 5'-end of poliovirus RNA was investigated. This complex involves the first 90 nucleotides of poliovirus genome which fold into a cloverleaf-like structure and interact with both uncleaved 3CD, the viral protease-polymerase precursor, and a 36 kDa ribosome-associated cellular protein. The cellular protein is required for complex formation and interacts with unpaired bases in one stem-loop of the cloverleaf RNA. Amino acids within the 3C protease which are important for RNA binding were identified by site-directed mutagenesis and the crystal structure of a related protease was used to model the RNA binding domain within the viral 3CD protein. The physiologic importance of the ribonucleic-protein complex is suggested by the finding that mutations that disrupt complex formation abolish RNA replication but do not affect RNA translation or stability. Based on these structural and functional findings we propose a model for the initiation of poliovirus RNA synthesis where an initiation complex consisting of 3CD, a cellular protein, and the 5'-end of the positive strand RNA catalyzes in trans the initiation of synthesis of new positive stranded RNA.     

Complementation of a poliovirus defective genome by a recombinant vaccinia virus which provides poliovirus P1 capsid precursor in trans.

Defective interfering (DI) RNA genomes of poliovirus which contain in-frame deletions in the P1 capsid protein-encoding region have been described. DI genomes are capable of replication and can be encapsidated by capsid proteins provided in trans from wild-type poliovirus. In this report, we demonstrate that a previously described poliovirus DI genome (K. Hagino-Yamagishi and A. Nomoto, J. Virol. 63:5386-5392, 1989) can be complemented by a recombinant vaccinia virus, VVP1 (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991), which expresses the poliovirus capsid precursor polyprotein, P1. Stocks of defective polioviruses were generated by transfecting in vitro-transcribed defective genome RNA derived from plasmid pSM1(T7)1 into HeLa cells infected with VVP1 and were maintained by serial passage in the presence of VVP1. Encapsidation of the defective poliovirus genome was demonstrated by characterizing poliovirus-specific protein expression in cells infected with preparations of defective poliovirus and by Northern (RNA) blot analysis of poliovirus-specific RNA incorporated into defective poliovirus particles. Cells infected with preparations of defective poliovirus expressed poliovirus protein 3CD but did not express capsid proteins derived from a full-length P1 precursor. Poliovirus-specific RNA encapsidated in viral particles generated in cells coinfected with VVP1 and defective poliovirus migrated slightly faster on formaldehyde-agarose gels than wild-type poliovirus RNA, demonstrating maintenance of the genomic deletion. By metabolic radiolabeling with [35S]methionine-cysteine, the defective poliovirus particles were shown to contain appropriate mature-virion proteins. This is the first report of the generation of a pure population of defective polioviruses free of contaminating wild-type poliovirus. We demonstrate the use of this recombinant vaccinia virus-defective poliovirus genome complementation system for studying the effects of a defined mutation in the P1 capsid precursor on virus assembly. Following removal of residual VVP1 from defective poliovirus preparations, processing and assembly of poliovirus capsid proteins derived from a nonmyristylated P1 precursor expressed by a recombinant vaccinia virus, VVP1 myr- (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 66:4556-4563, 1992), in cells coinfected with defective poliovirus were analyzed. Capsid proteins generated from nonmyristylated P1 did not assemble detectable levels of mature virions but did assemble, at low levels, into empty capsids.(ABSTRACT TRUNCATED AT 400 WORDS)     

Cleavage site mutations in the encephalomyocarditis virus P3 region lethally abrogate the normal processing cascade.

Site-specific mutations within the proteinase 3C-dependent P3 region cleavage sequences of encephalomyocarditis virus have been constructed. The mutations altered the normal QG cleavage site dipeptide pairs of the 2C/3A, 3A/3B, 3B/3C, and 3C/3D junctions into QV, QC, QF, QY, and RG sequences. When translated in vitro in the context of full-length viral polyproteins, all mutations blocked endogenous 3C-mediated processing at their engineered sites and produced stable forms of the expected viral P3 precursors that were also resistant to cleavage by exogenously added recombinant 3C. Relative to wild-type viral sequences, each mutant form of P3 had a somewhat different ability to mediate overall polyprotein processing. Mutations at the 2C/3A, 3A/3B, and 3B/3C sites, for example, were generally less impaired than 3C/3D mutations, when the cleavage reactions were quantitated with cotranslated L-P1-2A precursors. A notable exception was mutant 3B3C(QG-->RG), which proved far less active than sibling mutants 3B3C(QG-->QF) and 3B3C(QG-->QV), a finding that possibly implicates this segment in the proper folding of an active 3C. When transfected into HeLa cells, all mutant sequences were lethal, presumably because of the reduced L-P1-2A processing levels or reduced RNA synthesis capacity. However, when specifically tested for the latter activity, all mutations except those at the 3C/3D cleavage site were indeed able to initiate and perpetuate viral RNA replication in transfected cells, albeit to RNA accumulation levels lower than those produced by wild-type sequences. The transfection effects could be mimicked with cell-free synthesized proteins, in that translation samples containing locked 3CD polymerase precursors were catalytically inactive in poly(A)-oligo(U)-dependent assays, while all other mutant processing samples initiated detectable RNA synthesis. Surprisingly, not only did the 3B/3C mutant sequences prove capable of directing RNA synthesis, but the viral RNA thus synthesized could be immunolabeled and precipitated with 3C-specific monoclonal antibody reagents, indicating an unexpected covalent attachment of the proteinase to the RNA product whenever this cleavage site was blocked.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

Cleavage of synthetic peptides by purified poliovirus 3C proteinase

Synthetic peptides, 14-16 residues in length, were used as substrates for purified recombinant poliovirus proteinase 3C. The sequences of the substrates correspond to the sequences of authentic cleavage sites in the poliovirus polyprotein, all of which contain Gln-Gly at the scissile bond. Specificity of cleavages was demonstrated by analysis of 3C digests of synthetic peptides. Relative rate constants for the cleavages were derived by competition experiments. The rate constants roughly correlated with the estimated half-life of the homologous precursor proteins detected in poliovirus-infected cells. The peptide most resistant to cleavage corresponded to the 3C/3D junction, a site known to be cleaved very slowly by 3C in vivo. Substitution of threonine for alanine in P4 position of this peptide, however, resulted in significant cleavage. This observation supports the hypothesis that the residue in P4 position, in addition to the Gln-Gly in P1 and P1', respectively, contributes to substrate recognition. Ac-Gln-Gly-NH2 was not a substrate for 3C.