The X-ray crystal structures of human alpha-phosphomannomutase 1 reveal the structural basis of congenital disorder of glycosylation type 1a

Congenital disorder of glycosylation type 1a (CDG-1a) is a congenital disease characterized by severe defects in nervous system development. It is caused by mutations in alpha-phosphomannomutase (of which there are two isozymes, alpha-PMM1 and alpha-PPM2). Here we report the x-ray crystal structures of human alpha-PMM1 in the open conformation, with and without the bound substrate, alpha-D-mannose 1-phosphate. Alpha-PMM1, like most haloalkanoic acid dehalogenase superfamily (HADSF) members, consists of two domains, the cap and core, which open to bind substrate and then close to provide a solvent-exclusive environment for catalysis. The substrate phosphate group is observed at a positively charged site of the cap domain, rather than at the core domain phosphoryl-transfer site defined by the Asp(19) nucleophile and Mg(2+) cofactor. This suggests that substrate binds first to the cap and then is swept into the active site upon cap closure. The orientation of the acid/base residue Asp(21) suggests that alpha-phosphomannomutase (alpha-PMM) uses a different method of protecting the aspartylphosphate from hydrolysis than the HADSF member beta-phosphoglucomutase. It is hypothesized that the electrostatic repulsion of positive charges at the interface of the cap and core domains stabilizes alpha-PMM1 in the open conformation and that the negatively charged substrate binds to the cap, thereby facilitating its closure over the core domain. The two isozymes, alpha-PMM1 and alpha-PMM2, are shown to have a conserved active-site structure and to display similar kinetic properties. Analysis of the known mutation sites in the context of the structures reveals the genotype-phenotype relationship underlying CDG-1a.     

The crystal structure of bacillus cereus phosphonoacetaldehyde hydrolase: insight into catalysis of phosphorus bond cleavage and catalytic diversification within the HAD enzyme superfamily

Phosphonoacetaldehyde hydrolase (phosphonatase) catalyzes the hydrolysis of phosphonoacetaldehyde to acetaldehyde and phosphate using Mg(II) as cofactor. The reaction proceeds via a novel bicovalent catalytic mechanism in which an active-site nucleophile abstracts the phosphoryl group from the Schiff-base intermediate formed from Lys53 and phosphonoacetaldehyde. In this study, the X-ray crystal structure of the Bacillus cereus phosphonatase homodimer complexed with the phosphate (product) analogue tungstate (K(i) = 50 microM) and the Mg(II) cofactor was determined to 3.0 A resolution with an R(cryst) = 0.248 and R(free) = 0.284. Each monomer is made up of an alpha/beta core domain consisting of a centrally located six-stranded parallel beta-sheet surrounded by six alpha-helices. Two flexible, solvated linkers connect to a small cap domain (residues 21-99) that consists of an antiparallel, five-helix bundle. The subunit-subunit interface, formed by the symmetrical packing of the two alpha8 helices from the respective core domains, is stabilized through the hydrophobic effect derived from the desolvation of paired Met171, Trp164, Tyr162, Tyr167, and Tyr176 side chains. The active site is located at the domain-domain interface of each subunit. The Schiff base forming Lys53 is positioned on the cap domain while tungstate and Mg(II) are bound to the core domain. Mg(II) ligands include two oxygens of the tungstate ligand, one oxygen of the carboxylates of Asp12 and Asp186, the backbone carbonyl oxygen of Ala14, and a water that forms a hydrogen bond with the carboxylate of Asp190 and Thr187. The guanidinium group of Arg160 binds tungstate and the proposed nucleophile Asp12, which is suitably positioned for in-line attack at the tungsten atom. The side chains of the core domain residue Tyr128 and the cap domain residues Cys22 and Lys53 are located nearby. The identity of Asp12 as the active-site nucleophile was further evidenced by the observed removal of catalytic activity resulting from Asp12Ala substitution. The similarity of backbone folds observed in phosphonatase and the 2-haloacid dehalogenase of the HAD enzyme superfamily indicated common ancestry. Superposition of the two structures revealed a conserved active-site scaffold having distinct catalytic stations. Analysis of the usage of polar amino acid residues at these stations by the dehalogenases, phosphonatases, phosphatases, and phosphomutases of the HAD superfamily suggests possible ways in which the active site of an ancient enzyme ancestor might have been diversified for catalysis of C-X, P-C, and P-O bond cleavage reactions.     

Crystal structure of archaeal RNase HII: a homologue of human major RNase H

BACKGROUND: RNases H are present in all organisms and cleave RNAs in RNA/DNA hybrids. There are two major types of RNases H that have little similarity in sequence, size and specificity. The structure of RNase HI, the smaller enzyme and most abundant in bacteria, has been extensively studied. However, no structural information is available for the larger RNase H, which is most abundant in eukaryotes and archaea. Mammalian RNase H participates in DNA replication, removal of the Okazaki fragments and possibly DNA repair. RESULTS: The crystal structure of RNase HII from the hypothermophile Methanococcus jannaschii, which is homologous to mammalian RNase H, was solved using a multiwavelength anomalous dispersion (MAD) phasing method at 2 A resolution. The structure contains two compact domains. Despite the absence of sequence similarity, the large N-terminal domain shares a similar fold with the RNase HI of bacteria. The active site of RNase HII contains three aspartates: Asp7, Asp112 and Asp149. The nucleotide-binding site is located in the cleft between the N-terminal and C-terminal domains. CONCLUSIONS: Despite a lack of any detectable similarity in primary structure, RNase HII shares a similar structural domain with RNase HI, suggesting that the two classes of RNases H have a common catalytic mechanism and possibly a common evolutionary origin. The involvement of the unique C-terminal domain in substrate recognition explains the different reaction specificity observed between the two classes of RNase H.     

Crystal structures of the lytic transglycosylase MltA from N.gonorrhoeae and E.coli: insights into interdomain movements and substrate binding

MltA is a lytic transglycosylase of Gram-negative bacteria that cleaves the beta-1,4 glycosidic linkages between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan. We have determined the crystal structures of MltA from Neisseria gonorrhoeae and Escherichia coli (NgMltA and EcMltA), which have only 21.5% sequence identity. Both proteins have two main domains separated by a deep groove. Domain 1 shows structural similarity with the so-called double-psi barrel family of proteins. Comparison of the two structures reveals substantial differences in the relative positions of domains 1 and 2 such that the active site groove in NgMltA is much wider and appears more able to accommodate peptidoglycan substrate than EcMltA, suggesting that domain closure occurs after substrate binding. Docking of a peptidoglycan molecule into the structure of NgMltA reveals a number of conserved residues that are likely involved in substrate binding, including a potential binding pocket for the peptidyl moieties. This structure supports the assignment of Asp405 as the acid catalyst responsible for cleavage of the glycosidic bond. In EcMltA, the equivalent residue is Asp328, which has been identified previously. The structures also suggest a catalytic role for Asp393 (Asp317 in EcMltA) in activating the C6 hydroxyl group during formation of the 1,6-anhydro linkage. Finally, in comparison to EcMltA, NgMltA contains a unique third domain that is an insertion within domain 2. The domain is beta in structure and may mediate protein-protein interactions that are specific to peptidoglycan metabolism in N.gonorrhoeae.     

Crystal structures of 4-alpha-glucanotransferase from Thermococcus litoralis and its complex with an inhibitor

Thermococcus litoralis 4-alpha-glucanotransferase (TLGT) belongs to glucoside hydrolase family 57 and catalyzes the disproportionation of amylose and the formation of large cyclic alpha-1,4-glucan (cycloamylose) from linear amylose. We determined the crystal structure of TLGT with and without an inhibitor, acarbose. TLGT is composed of two domains: an N-terminal domain (domain I), which contains a (beta/alpha)7 barrel fold, and a C-terminal domain (domain II), which has a twisted beta-sandwich fold. In the structure of TLGT complexed with acarbose, the inhibitor was bound at the cleft within domain I, indicating that domain I is a catalytic domain of TLGT. The acarbose-bound structure also clarified that Glu123 and Asp214 were the catalytic nucleophile and acid/base catalyst, respectively, and revealed the residues involved in substrate binding. It seemed that TLGT produces large cyclic glucans by preventing the production of small cyclic glucans by steric hindrance, which is achieved by three lids protruding into the active site cleft, as well as an extended active site cleft. Interestingly, domain I of TLGT shares some structural features with the catalytic domain of Golgi alpha-mannosidase from Drosophila melanogaster, which belongs to glucoside hydrolase family 38. Furthermore, the catalytic residue of the two enzymes is located in the same position. These observations suggest that families 57 and 38 evolved from a common ancestor.     

Importance of the lid and cap domains for the catalytic activity of gastric lipases

Human gastric lipase (HGL) is an enzyme secreted by the stomach, which is stable and active despite the highly acidic environment. It has been clearly established that this enzyme is responsible for 30% of the fat digestion processes occurring in human. This globular protein belongs to the alpha/beta hydrolase fold family and its catalytic serine is deeply buried under a domain called the extrusion domain, which is composed of a 'cap' domain and a segment consisting of 58 residues, which can be defined as a lid. The exact roles played by the cap and the lid domains during the catalytic step have not yet been elucidated. We have recently solved the crystal structure of the open form of the dog gastric lipase in complex with a covalent inhibitor. The detergent molecule and the inhibitor were mimicking a triglyceride substrate that would interact with residues belonging to both the cap and the lid domains. In this study, we have investigated the role of the cap and the lid domains, using site-directed mutagenesis procedures. We have produced truncated mutants lacking the lid and the cap. After expressing these mutants and purifying them, their activity was found to have decreased drastically in comparison with the wild type HGL. The lid and the cap domains play an important role in the catalytic reaction mechanism. Based on these results and the structural data (open form of DGL), we have pointed out the cap and the lid residues involved in the binding with the lipidic substrate.     

Crystal structure of human spermine synthase: implications of substrate binding and catalytic mechanism

The crystal structures of two ternary complexes of human spermine synthase (EC 2.5.1.22), one with 5'-methylthioadenosine and spermidine and the other with 5'-methylthioadenosine and spermine, have been solved. They show that the enzyme is a dimer of two identical subunits. Each monomer has three domains: a C-terminal domain, which contains the active site and is similar in structure to spermidine synthase; a central domain made up of four beta-strands; and an N-terminal domain with remarkable structural similarity to S-adenosylmethionine decarboxylase, the enzyme that forms the aminopropyl donor substrate. Dimerization occurs mainly through interactions between the N-terminal domains. Deletion of the N-terminal domain led to a complete loss of spermine synthase activity, suggesting that dimerization may be required for activity. The structures provide an outline of the active site and a plausible model for catalysis. The active site is similar to those of spermidine synthases but has a larger substrate-binding pocket able to accommodate longer substrates. Two residues (Asp(201) and Asp(276)) that are conserved in aminopropyltransferases appear to play a key part in the catalytic mechanism, and this role was supported by the results of site-directed mutagenesis. The spermine synthase.5'-methylthioadenosine structure provides a plausible explanation for the potent inhibition of the reaction by this product and the stronger inhibition of spermine synthase compared with spermidine synthase. An analysis to trace possible evolutionary origins of spermine synthase is also described.     

A novel organization of ACT domains in allosteric enzymes revealed by the crystal structure of Arabidopsis aspartate kinase

Asp kinase catalyzes the first step of the Asp-derived essential amino acid pathway in plants and microorganisms. Depending on the source organism, this enzyme contains up to four regulatory ACT domains and exhibits several isoforms under the control of a great variety of allosteric effectors. We report here the dimeric structure of a Lys and S-adenosylmethionine-sensitive Asp kinase isoform from Arabidopsis thaliana in complex with its two inhibitors. This work reveals the structure of an Asp kinase and an enzyme containing two ACT domains cocrystallized with its effectors. Only one ACT domain (ACT1) is implicated in effector binding. A loop involved in the binding of Lys and S-adenosylmethionine provides an explanation for the synergistic inhibition by these effectors. The presence of S-adenosylmethionine in the regulatory domain indicates that ACT domains are also able to bind nucleotides. The organization of ACT domains in the present structure is different from that observed in Thr deaminase and in the regulatory subunit of acetohydroxyacid synthase III.     

Characterization of benzoxaborole-based antifungal resistance mutations demonstrates that editing depends on electrostatic stabilization of the leucyl-tRNA synthetase editing cap

The broad-spectrum benzoxaborole antifungal AN2690 blocks protein synthesis by inhibiting leucyl-tRNA synthetase (LeuRS) via a novel oxaborole tRNA trapping mechanism in the editing site. Herein, one set of resistance mutations is at Asp487 outside the LeuRS hydrolytic editing pocket, in a region of unknown function. It is located within a eukaryote/archaea specific insert I4, which forms part of a cap over a benzoxaborole-AMP that is bound in the LeuRS CP1 domain editing active site. Mutational and biochemical analysis at Asp487 identified a salt bridge between Asp487 and Arg316 in the hinge region of the I4 cap of yeast LeuRS that is critical for tRNA deacylation. We hypothesize that this electrostatic interaction stabilizes the cap during binding of the editing substrate for hydrolysis.     

Ligand requirements for Ca2+ binding to EGF-like domains.

Site-specific mutagenesis studies of the first epidermal growth factor-like (EGF-like) domain of human clotting factor IX suggest that the calcium-binding site present in this domain (dissociation constant Kd = 1.8 mM at pH 7.5 and ionic strength I = 0.15) involved the carboxylate residues Asp47, Asp49 and Asp64. To further characterize the ligands required for calcium binding to EGF-like domains, two new mutations, Asp47----Asn and Asp49----Asn, were introduced into the domain by peptide synthesis. 1H-NMR spectroscopy was used to obtain the dissociation constants for calcium binding to these mutations. Calcium binding to the Asp49----Asn modified domain is only mildly affected (Kd = 6 mM, I = 0.15), whereas binding to the Asp47----Asn modified domain is severely reduced (Kd = 42 mM, I = 0.15). From these data, it is proposed that the anionic oxygen atoms of the side chains of residues 47 and 64 are essential for calcium binding, whereas the side chain ligand for calcium at residue 49 can be a carboxyamide oxygen. As a control, the introduction of the modification Glu78----Asp in a region of the domain not believed to be involved in calcium binding had very little effect on the Kd for calcium (Kd = 2.6 mM, I = 0.15). Finally, the effect of an Asp47----Gly substitution found in the natural haemophilia B mutant, factor IXAlabama, was investigated. This peptide has a markedly reduced affinity for calcium (Kd = 37 mM, I = 0.15), suggesting that the defect in factor IXAlabama is due to impaired calcium binding to its first EGF-like domain.     

Activation of a cyanobacterial adenylate cyclase, CyaC, by autophosphorylation and a subsequent phosphotransfer reaction.

The CyaC protein, a cyanobacterial adenylate cyclase, has a unique primary structure composed of the catalytic domain of adenylate cyclase and the conserved domains of bacterial two-component regulatory systems, one transmitter domain and two receiver domains. In the present work, CyaC was produced in Escherichia coli as a histidine-tagged recombinant protein and purified to homogeneity. CyaC showed ability to autophosphorylate in vitro with the gamma-phosphate of [gamma-32P]ATP. CyaC derivatives were constructed by site-directed mutagenesis in which the highly conserved phosphorylation sites in the transmitter domain (His572) and receiver domains (Asp60 or Asp895) were replaced by glutamine and alanine residues, respectively. After autophosphorylation of the CyaC derivatives, the chemical stabilities of the phosphoryl groups bound to the derivatives were determined. It was found that His572 is the initial phosphorylation site and that the phosphoryl group once bound to His572 is transferred to Asp895. The enzyme activities of the CyaC derivatives defective in His572 or Asp895 were considerably reduced. Asp895 is phosphorylated by acetyl [32P]phosphate, a small phosphoryl molecule, but Asp60 is not. Acetyl phosphate stimulates adenylate cyclase activity only when Asp895 is intact. These results suggest that the phosphorylation of Asp895 is essential for the activation of adenylate cyclase and that Asp60 functions differently from Asp895 in regulating the enzyme activity.     

Crystal structure of human mitochondrial acyl-CoA thioesterase (ACOT2)

Acyl-CoA thioesterases (ACOTs) catalyze the hydrolysis of CoA esters to free CoA and carboxylic acids and have important functions in lipid metabolism and other cellular processes. Type I ACOTs are found only in animals and contain an α/β hydrolase domain, through currently no structural information is available on any of these enzymes. We report here the crystal structure at 2.1 Å resolution of human mitochondrial ACOT2, a type I enzyme. The structure contains two domains, N and C domains. The C domain has the α/β hydrolase fold, with the catalytic triad Ser294-His422-Asp388. The N domain contains a seven-stranded β-sandwich, which has some distant structural homologs in other proteins. The active site is located in a large pocket at the interface between the two domains. The structural information has significant relevance for other type I ACOTs and related enzymes.     

Integrin alpha(2)I domain recognizes type I and type IV collagens by different mechanisms

The collagens are recognized by the alphaI domains of the collagen receptor integrins. A common structural feature in the collagen-binding alphaI domains is the presence of an extra helix, named helix alphaC. However, its participation in collagen binding has not been shown. Here, we have deleted the helix alphaC in the alpha(2)I domain and tested the function of the resultant recombinant protein (DeltaalphaCalpha(2)I) by using a real-time biosensor. The DeltaalphaCalpha(2)I domain had reduced affinity for type I collagen (430 +/- 90 nM) when compared with wild-type alpha(2)I domain (90 +/- 30 nM), indicating both the importance of helix alphaC in type I collagen binding and that the collagen binding surface in alpha(2)I domain is located near the metal ion-dependent adhesion site. Previous studies have suggested that the charged amino acid residues, surrounding the metal ion-dependent adhesion site but not interacting with Mg(2+), may play an important role in the recognition of type I collagen. Direct evidence indicating the participation of these residues in collagen recognition has been missing. To test this idea, we produced a set of recombinant alpha(2)I domains with mutations, namely D219A, D219N, D219R, E256Q, D259N, D292N, and E299Q. Mutations in amino acids Asp(219), Asp(259), Asp(292), and Glu(299) resulted in weakened affinity for type I collagen. When alpha(2) D219N and D292N mutations were introduced separately into alpha(2)beta(1) integrin expressed on Chinese hamster ovary cells, no alterations in the cell spreading on type I collagen were detected. However, Chinese hamster ovary cells expressing double mutated alpha(2) D219N/D292N integrin showed remarkably slower spreading on type I collagen, while spreading on type IV collagen was not affected. The data indicate that alpha(2)I domain binds to type I collagen with a different mechanism than to type IV collagen.     

Proteomic analysis of complexes formed by human topoisomerase I

Human topoisomerase I is a nuclear enzyme that catalyses DNA relaxation and phosphorylation of SR proteins. Topoisomerase I participates in several protein-protein interactions. We performed a proteomic analysis of protein partners of topoisomerase I. Two methods were applied to proteins of the nuclear extract of HeLa cells: a co-immunoprecipitation and an affinity chromatography combined with mass spectrometry. Complexes formed by topoisomerase I with its protein partners were immunoprecipitated by scleroderma anti-topoisomerase I antibodies. To identify binding sites for the protein partners, baits corresponding to fragments of topoisomerase I were constructed and used in the affinity chromatography. The N-terminal domain and the cap region of the core domain appeared to be the main regions that bound proteins. We identified 36 nuclear proteins that were associated with topoisomerase I. The proteins were mainly involved in RNA metabolism. We found 29 new and confirmed 7 previously identified protein partners of topoisomerase I. More than 40% proteins that associate with the cap region contain two closely spaced RRM domains. Docking calculations identified the RRM domains as a possible site for the interaction of these proteins with the cap region.     

The structure of yeast enolase at 2.25-A resolution. An 8-fold beta + alpha-barrel with a novel beta beta alpha alpha (beta alpha)6 topology

The three-dimensional structure of yeast enolase has been determined by the multiple isomorphous replacement method followed by the solvent flattening technique. A polypeptide model, corresponding with the known amino acid sequence, has been fitted to the electron density map. Crystallographic restrained least-squares refinement of the model without solvent gave R = 20.0% for 6-2.25-A resolution with good geometry. A model with 182 water molecules and 1 sulfate which is still being refined has presently R = 17.0%. The molecule is a dimer with subunits related by 2-fold crystallographic symmetry. The subunit has dimensions 60 X 55 X 45 A and is built from two domains. The smaller N-terminal domain has an alpha + beta structure based on a three-stranded antiparallel meander and four helices. The main domain is an 8-fold beta + alpha-barrel. The enolase barrel is, however, different from the triose phosphate isomerase barrel; its topology is beta beta alpha alpha (beta alpha)6 rather than (beta alpha)8 as found in triose phosphate isomerase. The inner beta-barrel is not entirely parallel, the second strand is antiparallel to the other strands, and the direction of the first helix is also reversed with respect to the other helices. This supports the hypothesis that some enzymes evolved independently producing the stable structure of beta alpha barrels with either enolase or triose phosphate isomerase topology. The active site of enolase is located at the carboxylic end of the barrel. A fragment of the N-terminal domain and two long loops protruding from the barrel domain form a wide crevice leading to the active site region. Asp246, Glu295, and Asp320 are the ligands of the conformational cation. Other residues in the active site region are Glu168, Asp321, Lys345, and Lys396.     

Asp383 in the second transmembrane domain of the lutropin receptor is important for high affinity hormone binding and cAMP production.

The lutropin (LH), follitropin, and thyrotropin receptors belong to the superfamily of G-protein coupled receptors and have some unique structural features. These glycoprotein hormone receptors comprise a C-terminal half and an N-terminal half of similar size. The C-terminal half is equivalent to the entire structure of other G-protein coupled receptors and has seven transmembrane domains, three cytoplasmic loops, three exoplasmic loops, and a C terminus. In contrast, the hydrophilic N-terminal half is exoplasmic and unique to the glycoprotein hormone receptors. This large N-terminal half of the LH receptor has recently been shown to be capable of binding the hormone. Therefore, these glycoprotein hormone receptors are structurally and functionally different from other G-protein coupled receptors. In an attempt to define the role of the membrane-associated C-terminal half of the LH receptor, we have prepared several mutant receptors in which an Asp or Glu in the seven transmembrane domains has been converted to Asn or Gln, respectively. These include Asp383----Asn in the second transmembrane domain, Glu410----Gln in the third transmembrane domain, and Asp556----Asn in the sixth transmembrane domain. All these mutant receptors were successfully expressed in Cos 7A cells. The Glu410----Gln and Asp556----Asn mutants maintained normal affinities for hormone binding and cAMP production, but the Asp383----Asn mutant showed significantly lower affinities. Although Asp383 of the LH receptor is conserved in all G-protein coupled receptors cloned to date except the substance P receptor, which has Glu in the place of the Asp residue, this is the first observation of the critical role of the Asp in hormone binding and subsequent stimulation of cAMP production.     

Crystal structure of a deletion mutant of a tyrosyl-tRNA synthetase complexed with tyrosine

The crystal structure of a deletion mutant of tyrosyl-tRNA synthetase from Bacillus stearothermophilus has been determined at 2.5 A resolution using molecular replacement techniques. The genetically engineered molecule catalyses the activation of tyrosine with kinetic properties similar to those of the wild-type enzyme but no longer binds tRNATyr. It contains 319 residues corresponding to the region of the polypeptide chain for which interpretable electron density is present in crystals of the wild-type enzyme. The partly refined model of the wild-type enzyme was used as a starting point in determining the structure of the truncated mutant. The new crystals are of space group P2(1) and contain the molecular dimer within the asymmetric unit. The refined model has a crystallographic R-factor of 18.7% for all reflections between 8 and 2.5 A. Each subunit contains two structural domains: the alpha/beta domain (residues 1 to 220) containing a six-stranded beta-sheet and the alpha-helical domain (residues 248 to 319) containing five helices. The alpha/beta domains are related by a non-crystallographic dyad while the alpha-helical domains are in slightly different orientations in the two subunits. The tyrosine substrate binds in a slot at the bottom of a deep active site cleft in the middle of the alpha/beta domain. It is surrounded by polar side-chains and water molecules that are involved in an intricate hydrogen bonding network. Both the alpha-amino and hydroxyl groups of the substrate make good hydrogen bonds with the protein. The amino group forms hydrogen bonds with Tyr169-OH, Asp78-OD1 and Gln173-OE1. The phenolic hydroxyl group forms hydrogen bonds with Asp76-OD1 and Tyr34-OH. In contrast, the substrate carboxyl group makes no direct interactions with the enzyme. The results of both substrate inhibition studies and site-directed mutagenesis experiments have been examined in the light of the refined structure.     

Molecular signals for phosphatidylinositol modification of the Qa-2 antigen

Most cell surface proteins are anchored to the cell bilayer by hydrophobic membrane-spanning domains. Recently it has been shown that a small class of molecules are attached to cell surfaces via a phosphatidylinositol moiety covalently linked to the C-terminus of the mature processed polypeptide. The molecular signals that identify a polypeptide for phosphatidylinositol (PI) attachment have not been well defined in any system, but are thought to reside in the C-terminus of the primary translation product. We report that all the signals responsible for PI anchoring of Qa-2 Ag are confined to the 36 C-terminal residues of the precursor proteins. To investigate further the features that signal cleavage and PI addition, we have studied mutants of two closely related murine class I MHC molecules: the PI-linked Ag, Q9b, from the Qa-2 Ag family, and the integral membrane transplantation antigen, H-2Ld. The addition of 15 amino acids to the three residue long cytoplasmic domain of Q9b or the mutation of Asp295 found in its C-terminal hydrophobic domain to Val converts this molecule into an integral membrane protein. However, the introduction of a short three residue cytoplasmic tail and Asp295 into the transmembrane domain of H-2Ld does not convert this molecule to a PI-linked one. The results of these analyses suggest that the PI-processing signals may depend on overall conformation, hydrophobicity, and length of the C-terminal domain of the precursor protein. In addition these data indicate that PI anchoring of class I Ag requires more than two mutational steps and may have been selected during the evolution.     

X-ray structure of simian immunodeficiency virus integrase containing the core and C-terminal domain (residues 50-293)--an initial glance of the viral DNA binding platform

The crystal structure of simian immunodeficiency virus (SIV) integrase that contains in a single polypeptide the core and the C-terminal deoxyoligonucleotide binding domain has been determined at 3 A resolution with an R-value of 0.203 in the space group P2(1)2(1)2(1). Four integrase core domains and one C-terminal domain are found to be well defined in the asymmetric unit. The segment extending from residues 114 to 121 assumes the same position as seen in the integrase core domain of avian sarcoma virus as well as human immunodeficiency virus type-1 (HIV-1) crystallized in the absence of sodium cacodylate. The flexible loop in the active site, composed of residues 141-151, remains incompletely defined, but the location of the essential Glu152 residue is unambiguous. The residues from 210-218 that link the core and C-terminal domains can be traced as an extension from the core with a short gap at residues 214-215. The C(alpha) folding of the C-terminal domain is similar to the solution structure of this domain from HIV-1 integrase. However, the dimeric form seen in the NMR structure cannot exist as related by the non-crystallographic symmetry in the SIV integrase crystal. The two flexible loops of the C-terminal domain, residues 228-236 and residues 244-249, are much better fixed in the crystal structure than in the NMR structure with the former in the immediate vicinity of the flexible loop of the core domain. The interface between the two domains encompasses a solvent-exclusion area of 1500 A(2). Residues from both domains purportedly involved in DNA binding are narrowly distributed on the same face of the molecule. They include Asp64, Asp116, Glu152 and Lys159 from the core and Arg231, Leu234, Arg262, Arg263 and Lys264 from the C-terminal domain. A model for DNA binding is proposed to bridge the two domains by tethering the 228-236 loop of the C-terminal domain and the flexible loop of the core.     

Organization of the SH3-SH2 unit in active and inactive forms of the c-Abl tyrosine kinase

The tyrosine kinase c-Abl is inactivated by interactions made by its SH3 and SH2 domains with the distal surface of the kinase domain. We present a crystal structure of a fragment of c-Abl which reveals that a critical N-terminal cap segment, not visualized in previous structures, buttresses the SH3-SH2 substructure in the autoinhibited state and locks it onto the distal surface of the kinase domain. Surprisingly, the N-terminal cap is phosphorylated on a serine residue that interacts with the connector between the SH3 and SH2 domains. Small-angle X-ray scattering (SAXS) analysis shows that a mutated form of c-Abl, in which the N-terminal cap and two other key contacts in the autoinhibited state are deleted, exists in an extended array of the SH3, SH2, and kinase domains. This alternative conformation of Abl is likely to prolong the active state of the kinase by preventing it from returning to the autoinhibited state.