Role of electrostatics in the binding of charged metallophthalocyanines to neutral and charged phospholipid membranes

Binding of the cationic tetra(tributylammoniomethyl)-substituted hydroxoaluminum phthalocyanine (AlPcN₄) to bilayer lipid membranes was studied by fluorescence correlation spectroscopy (FCS) and intramembrane field compensation (IFC) methods. With neutral phosphatidylcholine membranes, AlPcN₄ appeared to bind more effectively than the negatively charged tetrasulfonated aluminum phthalocyanine (AlPcS₄), which was attributed to the enhancement of the coordination interaction of aluminum with the phosphate moiety of phosphatidylcholine by the electric field created by positively charged groups of AlPcN₄. The inhibitory effect of fluoride ions on the membrane binding of both AlPcN₄ and AlPcS₄ supported the essential role of aluminum-phosphate coordination in the interaction of these phthalocyanines with phospholipids. The presence of negative or positive charges on the surface of lipid membranes modulated the binding of AlPcN₄ and AlPcS₄ in accord with the character (attraction or repulsion) of the electrostatic interaction, thus showing the significant contribution of the latter to the phthalocyanine adsorption on lipid bilayers. The data on the photodynamic activity of AlPcN₄ and AlPcS₄ as measured by sensitized photoinactivation of gramicidin channels in bilayer lipid membranes correlated well with the binding data obtained by FCS and IFC techniques. The reduced photodynamic activity of AlPcN₄ with neutral membranes violating this correlation was attributed to the concentration quenching of singlet excited states as proved by the data on the AlPcN₄ fluorescence quenching.     

Mechanism of the binding of 2-(4'-hydroxyphenylazo)benzoic acid to bovine serum albumin

The mechanism of the binding of 2-(4'-hydroxyphenylazo)benzoic acid (HABA) to bovine serum albumin was studied by relaxation methods as well as the binding isotherm using gel chromatography. A single relaxation was observed over a wide range of HABA concentration except at the extremes of high concentration where another slow process was observed. The concentration dependence of the reciprocal relaxation time of the fast process decreased monotonically with increase in concentration of HABA at constant polymer concentration. The data were analyzed on the basis of Brown's domain structure model and were found to be consistent with a sequential binding mechanism. The azohydrazon tautomerism of HABA was identified with the intramolecular step of the complex. The activation parameters of the step, determined from the temperature dependence of the relaxation time of the fast process, showed that this step is rate limited by an enthalpy barrier in both forward and backward directions. Comparison of the activation parameters with those of other serum albumin-ligand systems suggests that there is an enthalpy-entropy compensation in the activation process of the intramolecular step with the compensation temperature at about 270 K; the enthalpy-entropy compensation is thought to be related to the hydrophobic nature of the ligand.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

An Extreme Value Analysis of Pollutant Concentrations in Surface Soils Due to Atmospheric Deposition

Risk assessments often rely on deterministic models using long-term averages or “steady-state” values of input variables. Such models do not provide the information needed to estimate acute exposures. This study uses extreme value theory to examine the frequency and magnitude of daily pollutant concentrations in surface soils predicted at six U.S. locations. Concentrations are predicted using a deposition-leaching model and 50 years of historical precipitation data. A stochastic model also is used to generate 1000 years of precipitation data as modeling inputs for each location. The annual maximum concentrations at each site are fitted to a Gumbel type I distribution to estimate occurrence probability. For soluble pollutants, the predicted concentration varied substantially with precipitation, and the maximum daily concentrations exceeded annual averages by 4 to 8 times. Observed and synthetic precipitation data produced similar results at most study locations, though the synthetic data provided a slightly better fit to the Gumbel type I distribution. The precipitation model allows the generation of representative precipitation data that extend limited historical records. The extreme value analysis facilitates the evaluation of maximum pollutant concentrations, return periods, and other statistics that are important in evaluating acute exposures.     

The unpredictability of favourability: condition assessment and protected areas in England

The probability that protected areas will deliver their potential for maintaining or enhancing biodiversity is likely to be maximised if they are appropriately and effectively managed. As a result, governments and conservation agencies are devoting much attention to the management of protected areas. In the U.K., the demand for performance accountability has resulted in Public Service Agreements (PSA) that set out targets for government departments to deliver results in return for investments being made. One such target for England is to ensure that all nationally important wildlife sites are in favourable condition by 2010. Here, we tested the hypothesis, of potential strategic importance, that the ecological condition of these sites is predictable from relationships with a range of physical, environmental and demographic variables. We used binary logistic regression to investigate these relationships, using the results of English Nature’s 1997–2003 condition assessment exercise. Generally, sites in unfavourable condition tend to be larger in area, located at higher elevations, but with higher human population density and are more spatially isolated from units of the same habitat. However, despite the range of different parameters included in our models, the extent to which the condition of any given site could be predicted was low. Our results have implications for the delivery of PSA targets, funding allocation, and the location of new protected areas.     

In Pursuit of Safety: One-Hundred Years of Toxicological Risk Assessment

The publication in 1962 of Rachel Carson's Silent Spring marks the mid-point in a century that saw, in its first half, the emergence of public health concerns related to human exposures to chemicals, and, in its second half, the emergence of public policies to deal with those concerns. Those policies made it imperative that the scientific community come to grips with the problem of identifying exposure levels not likely to cause harm. This problem was not significantly discussed within the scientific community until the 1950s, and well-described methods for practical solutions to it did not appear until the 1970s. An important report from the National Academy of Sciences, published in 1983 (Risk Assessment in the Federal Government), provided an analysis of these emerging methods, and recommended a useful framework for the assessment and management of risk. This framework remains central to public health and regulatory decision-making. A high-level perspective is offered on events leading to and following the 1983 report. The article describes early thinking about chemical toxicity and the scientific path that thinking followed through the 20th century, and to the present.     

Can transposable element copy number distribution parameters be estimated from natural populations of Drosophila melanogaster?

The copy frequency distribution of a transposable element family in a Drosophila melanogaster natural population is generally characterised by the values of the Charlesworths' model parameters α and β (Charlesworth & Charlesworth, 1983). The estimation of these parameters is made using the observed distribution of the occupied sites in a population sample. Several results have been interpreted as due either to the influence of stochastic factors or to deterministic factors (transposition, excision, selection…). The accuracy of this method was tested by estimations performed on samples from simulated populations. The results show that with the sample size usually used for natural population studies, the confidence intervals are too large to reasonably deduce either the element copy number distribution or the values of transposition and excision rate and selective coefficients.     

The significance of mycotoxins in the framework of assessing workplace related risks

Mycotoxins are fungal metabolite which may in some cases exhibit a high health hazard potential. Mycotoxins can show carcinogenic, mutagenic, toxic, teratogenic or immunotoxic effects. Mycotoxin exposure in the workplace may occur through inhalation and skin contact,e.g. during occupational handling of organic matter such as livestock feed, food products, or waste. Various studies suggest that both acute and chronic effects can occur, depending at least on the exposure level. The magnitude of the potential health risks associated with a respiratory or dermal intake of mycotoxins has largely remained unclear to date. However, according to the directive 2000/54/EC on biological agents and the corresponding German Biological Agents Ordinance, employers are also required to consider the potential hazards posed by toxic effects of biological agents when assessing workplace risks. The aim of this article, therefore, is to present some basis information that should facilitate an evaluation of the significance of mycotoxins in the context of assessing workplace risks. It also provides suggestions for occupational health and safety measures.     

Recent Advances in the use of Immobilized Lipases Directed Toward the Asymmetric Syntheses of Complex Molecules

Water-insoluble compounds can be substrates for enzymatic reactions when lipases are immobilized properly and suitable organic solvents are used. In this review, three type of lipase immobilization method and their application to the asymmetric syntheses of complex molecules are described. Lipases immobilized with Celite or synthetic prepolymers such as urethane prepolymer and photo-crosslinkable resin prepolymer have been applied for the kinetic resolution of many kinds of water-insoluble substrate.

Phospholipid-lipase aggregates with ether linkages are novel and have been found to function effectively as immobilized lipases in asymmetric hydrolysis or esterification reactions in water-saturated organic solvent. The phospholipid-lipase aggregates are considered to have a stacked bilayer based on X-ray diffraction analysis structure of the lipid in the crystalline phase.     

Vocalisation sound pattern identification in young broiler chickens

In this study, we describe the monitoring of young broiler chicken vocalisation, with sound recorded and assessed at regular intervals throughout the life of the birds from day 1 to day 38, with a focus on the first week of life. We assess whether there are recognisable, and even predictable, vocalisation patterns based on frequency and sound spectrum analysis, which can be observed in birds at different ages and stages of growth within the relatively short life of the birds in commercial broiler production cycles. The experimental trials were carried out in a farm where the broiler where reared indoor, and audio recording procedures carried out over 38 days. The recordings were made using two microphones connected to a digital recorder, and the sonic data was collected in situations without disturbance of the animals beyond that created by the routine activities of the farmer. Digital files of 1 h duration were cut into short files of 10 min duration, and these sound recordings were analysed and labelled using audio analysis software. Analysis of these short sound files showed that the key vocalisation frequency and patterns changed in relation to increasing age and the weight of the broilers. Statistical analysis showed a significant correlation (P<0.001) between the frequency of vocalisation and the age of the birds. Based on the identification of specific frequencies of the sounds emitted, in relation to age and weight, it is proposed that there is potential for audio monitoring and comparison with ‘anticipated’ sound patterns to be used to evaluate the status of farmed broiler chicken.