Role of electrostatics in the binding of charged metallophthalocyanines to neutral and charged phospholipid membranes

Binding of the cationic tetra(tributylammoniomethyl)-substituted hydroxoaluminum phthalocyanine (AlPcN₄) to bilayer lipid membranes was studied by fluorescence correlation spectroscopy (FCS) and intramembrane field compensation (IFC) methods. With neutral phosphatidylcholine membranes, AlPcN₄ appeared to bind more effectively than the negatively charged tetrasulfonated aluminum phthalocyanine (AlPcS₄), which was attributed to the enhancement of the coordination interaction of aluminum with the phosphate moiety of phosphatidylcholine by the electric field created by positively charged groups of AlPcN₄. The inhibitory effect of fluoride ions on the membrane binding of both AlPcN₄ and AlPcS₄ supported the essential role of aluminum-phosphate coordination in the interaction of these phthalocyanines with phospholipids. The presence of negative or positive charges on the surface of lipid membranes modulated the binding of AlPcN₄ and AlPcS₄ in accord with the character (attraction or repulsion) of the electrostatic interaction, thus showing the significant contribution of the latter to the phthalocyanine adsorption on lipid bilayers. The data on the photodynamic activity of AlPcN₄ and AlPcS₄ as measured by sensitized photoinactivation of gramicidin channels in bilayer lipid membranes correlated well with the binding data obtained by FCS and IFC techniques. The reduced photodynamic activity of AlPcN₄ with neutral membranes violating this correlation was attributed to the concentration quenching of singlet excited states as proved by the data on the AlPcN₄ fluorescence quenching.     

激光光漂恢复技术测定林蛙卵第一次卵裂前卵表面的运动

激光光漂恢复技术测定了异硫氰基荧光素标记的林蛀卵表面分子在第一次卵裂前的运动。发现固着在玻片上的剥离“细胞膜”的分子运动形式为扩散。扩散系数为(4.6±1.3)×10~(-12)cm~2/s,可动部份为15%。完整卵子上的分子运动形式为流动。细胞膜在不停地流动着。它可能起着协助细胞质运动的作用。细胞膜流动的速度随时间而异,卵裂前不久,在大多数的卵子上,出现两个流动较慢的谷,少数细胞只测到一个谷。这可能与光漂起始时间,光斑与未来分裂沟的距离,和卵子间的差异有关。也讨论了这种速度变化与表面收缩波的关系。     

On the choice of the optimal periodic operation for a continuous fermentation process

In this contribution we investigate the impact of the forcing waveform on the productivity of a continuous bioreactor governed by an unstructured, nonlinear kinetic model. The (periodic) forcing is applied on the substrate concentration in the feed. To this end, some alternative waveforms commonly encountered in practice are evaluated and their performance is compared. An analytical/numerical approach is used. The preliminary analytical step is based on the π‐criterion that gives useful information for small amplitudes. The extension to larger amplitudes, when significant improvements are expected, is then performed through a continuation‐optimization procedure. It is found that the choice of the specific waveform has an impact on the performance of the process and there is no unique best forcing for any process condition, but its choice depends on the operating parameters and the forcing amplitude and frequency values. Further, the influence of the waveform functions on the wash‐out conditions are extensively examined. The analysis shows that all the waveforms examined in this work may lead to significant enlargement of the nontrivial regime with respect to a steady state operation. In particular, square‐wave forcing leads in practice to the extinction of the wash‐out conditions for any feed substrate concentration and for a well defined choice of the forcing parameters. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

On the rotational brownian motion of a bacterial idle motor. II. Theory of fluorescence correlation spectroscopy

The photon flux autocorrelation function of a fluorescent label attached to a bacterial motor shaft is calculated for the case in which the bacterial motor is considered to be actively but idly rotating. It is shown that even when the fluorescent label has a very short lifetime, fluorescence correlation spectroscopy should provide a useful tool for determining the rate of revolution of the bacterial motor under various solution conditions.     

Microsecond Dynamics During the Binding-induced Folding of an Intrinsically Disordered Protein

Tau is an intrinsically disordered protein implicated in many neurodegenerative diseases. The repeat domain fragment of tau, tau-K18, is known to undergo a disorder to order transition in the presence of lipid micelles and vesicles, in which helices form in each of the repeat domains. Here, the mechanism of helical structure formation, induced by a phospholipid mimetic, sodium dodecyl sulfate (SDS) at sub-micellar concentrations, has been studied using multiple biophysical probes. A study of the conformational dynamics of the disordered state, using photoinduced electron transfer coupled to fluorescence correlation spectroscopy (PET-FCS) has indicated the presence of an intermediate state, I, in equilibrium with the unfolded state, U. The cooperative binding of the ligand (L), SDS, to I has been shown to induce the formation of a compact, helical intermediate (IL₅) within the dead time (∼37 µs) of a continuous flow mixer. Quantitative analysis of the PET-FCS data and the ensemble microsecond kinetic data, suggests that the mechanism of induction of helical structure can be described by a U ↔ I ↔ IL₅ ↔ FL₅ mechanism, in which the final helical state, FL₅, forms from IL₅ with a time constant of 50–200 µs. Finally, it has been shown that the helical conformation is an aggregation-competent state that can directly form amyloid fibrils.     

Simulation of Y-chromosomal haplotype data

The non-recombining nature of the Y-chromosome determines the non-independence of alleles between loci. The evolution of short tandem repeat (STR) loci in the Y-chromosome is the result of different factors such as differential mutation rates, mutation modes, gene conversion, selection and demographic processes. The degree of correlation between loci is dependent on the magnitude of these processes. The simulation of data is a routine tool used for testing hypotheses in population and evolutionary studies. The most basic parameters hitherto used in lineage haplotype simulations are the allele frequency distributions and mutation rates, assuming either full independence or linkage between loci. In this study we introduce use of the Spearman correlation coefficient to estimate the degree of dependence between non-recombining loci. Then, both the interdependence between loci and the allele frequency distributions at multi-allelic loci are incorporated in an algorithm for simulating haplotypes. We illustrate the method using published and unpublished Y-chromosome STR data.     

Stereological Determination of Orientations,Second-Order Quantities and Correlations for Random Spatial Fibre Systems

This paper presents methods for the stereological analysis of spatial fibre systems on the base of planar or thin sections. Under the assumption that the cross-section figures of the tubular fibres can be measured, the orientation distribution of the fibre system and its line density L_v can be determined from one section only and without distributional assumptions. A simple way to study the degree of randomness of fibre systems consists in the statistical analysis of the point pattern of centres of intersection figures. More sophisticated methods are of stereological nature and yield the spatial reduced second moment measure. Similarly also correlations between two fibre systems can be quantified. The methods are demonstrated by two examples concerning samples of human brain.     

Vegetation mapping with the aid of low-altitude aerial photography

Abstract. A technique for fine-scale vegetation mapping with the aid of low-altitude aerial photography was developed. The procedure is as follows: 1. The site is divided into a lattice pattern - in case the site is too large to fit into a single photograph with satisfactory resolution. The coordinates of every lattice point are surveyed to be used as control points for geometric correction. A photograph of each block of the lattice is taken using a remote-controlled camera system lifted by a captive helium balloon. 2. The vegetation is classified on the basis of a phytosociological survey. 3. The shapes and locations of vegetation patches appearing in the photographs are entered into a computer, using a digitizer. A geometric correction is carried out through coordinate transformation referring to the coordinates of the control points and subsequently a draft vegetation map is produced. Finally, discrepancies are corrected and the map is coloured to produce the final version of the vegetation map. This technique was applied to vegetation mapping at a bar, 500 m wide and 2 km long, in the river Yoshino in Shikoku, Japan. A fine-scale vegetation map was obtained and used to analyse the influence of plants on geomorphic processes and community-specific hydrogeomorphic conditions on the bar.     

An automated technique for monitoring carbon dioxide respired by insects*

ABSTRACT. A non-dispersive infrared gas analyser equipped with a Luft-type sonic detector and flow-through reference cell was automated to monitor the total volume of carbon dioxide (CO₂) respired by single insects or groups of insects. The infrared analyser was interfaced with an integrator for quantification, a microprocessor to control intermittent air flow through the insect respiration chambers, and a microcomputer for data storage and reduction. This technique has been used to monitor the CO₂ Output of diapausing and non-diapausing mature fifth instar larvae and of developing pupae of the codling moth, Cydia pomonella (L.) (Lepidoptera: Tortricidae). The resulting data were accurate, quantitative and reproducible.