High-strength wastewater treatment using microbial biofilm reactor: a critical review

World Journal of Microbiology and Biotechnology - Natural products extracted from plants are an alternative method for controlling postharvest citrus blue mold, caused by Penicillium italicum (P....     

Effects of nitrate treatment on a mixed species, oil field microbial biofilm

Biofilms of bacteria, indigenous to oil field produced water, were grown in square section, glass capillary flow cells at 45 °C. Initially, in situ image analysis microscopy revealed predominantly coccoid bacteria (length-to-width ratio measurements (l _c:w _c) of bacterial cells gave a mean value of 1.1), while chemical measurements confirmed sulphate reduction and sulphide production. After nitrate ion addition at 100 and 80 mg/l, in the two repeat experiments respectively, the dominance of rod-shaped bacteria (mean l _c:w _c = 2.8) was observed. This coincided with the occurrence of nitrate reduction in the treated flow cells. Beneficially, no significant increase in biofilm cover was observed after the addition of nitrate. The dominant culturable nitrate-reducing bacterium was Marinobacter aquaeolei. The l _c:w _c ratio measured here concurs with previously reported cell dimensions for this organism. Several Marinobacter strains were also isolated from different oil fields in the North Sea where nitrate treatment has been applied to successfully treat reservoir souring, implying that this genus may play an important role in nitrate treatment.     

Microbial structure and community of RBC biofilm removing nitrate and phosphorus from domestic wastewater

Using a rotating biological contactor modified with a sequencing bath reactor system (SBRBC) designed and operated to remove phosphate and nitrogen [58], the microbial community structure of the biofilm from the SBRBC system was characterized based on the extracellular polymeric substance (EPS) constituents, electron microscopy, and molecular techniques. Protein and carbohydrate were identified as the major EPS constituents at three different biofilm thicknesses, where the amount of EPS and bacterial cell number were highest in the initial thickness of 0-100 mum. However, the percent of carbohydrate in the total amount of EPS decreased by about 11.23%, whereas the percent of protein increased by about 11.15% as the biofilm grew. Thus, an abundant quantity of EPS and cell mass, as well as a specific quality of EPS were apparently needed to attach to the substratum in the first step of the biofilm growth. A FISH analysis revealed that the dominant phylogenetic group was beta- and gamma-Proteobacteria, where a significant subclass of Proteobacteria for removing phosphate and/or nitrate was found within a biofilm thickness of 0-250 mum. In addition, 16S rDNA clone libraries revealed that Klebsiella sp. and Citrobacter sp. were most dominant within the initial biofilm thickness of 0-250 mum, whereas sulfur-oxidizing bacteria, such as Beggiatoa sp. and Thiothrix sp., were detected in a biofilm thickness over 250 mum. The results of the bacterial community structure analysis using molecular techniques agreed with the results of the morphological structure based on scanning electron microscopy. Therefore, the overall results indicated that coliform bacteria participated in the nitrate and phosphorus removal when using the SBRBC system. Moreover, the structure of the biofilm was also found to be related to the EPS constituents, as well as the nitrogen and phosphate removal efficiency. Consequently, since this is the first identification of the bacterial community and structure of the biofilm from an RBC simultaneously removing nitrogen and phosphate from domestic wastewater, and it is hoped that the present results may provide a foundation for understanding nitrate and phosphate.     

Dynamic changes in root hydraulic properties in response to nitrate availability

Changes in root hydraulic resistance in response to alterations in nitrate supply were explored in detail as a potential mechanism that allows plants to respond rapidly to changes in their environment. Sunflower (Helianthus annuus cv. Holiday) plants grown hydroponically with limited nitrate availability (200 micromol l(-1)) served as our model system. Experimental plants were 6-9-weeks-old with total dry mass of 2-4 g. Root pressurization of intact plants and detached root systems was used to elucidate the temporal dynamics of root hydraulic properties in sunflower plants following changes in external nitrate availability. The response was rapid, with a 20% decrease in hydraulic resistance occurring within the first hour after the addition of 5 mM nitrate and the magnitude of the effect was dependent on nitrate concentration. The change in root hydraulic resistance was largely reversible, although the temporal dynamics of the response to nitrate addition versus nitrate withdrawal was not symmetric (a gradual decrease in resistance versus its fast increase), raising the possibility that the underlying mechanisms may also differ. Evidence is presented that the observed changes in root hydraulic properties require the assimilation of nitrate by root cells. The hydraulic resistance of roots, previously stimulated by the addition of nitrate, increased more than in control plants in low nitrate under anoxia and that suggests a key role of aquaporin activity in this response. It is proposed that a rapid decrease in root hydraulic resistance in the presence of increased nitrate availability is an important trait that could enhance a plant's ability to compete for nitrate in the soil.     

Cr(VI) reduction by sulfidogenic and nonsulfidogenic microbial consortia

In time course experiments, bacterial community compositions were compared between a sulfidogenic and two nonsulfidogenic Cr(VI)-reducing consortia enriched from metal-contaminated sediments. The consortia were subjected to 0 and 0.85 mM or 1.35 mM Cr(VI), and Cr(VI) reduction, growth, and denaturing gradient gel electrophoresis profiles of PCR products of small-subunit (16S) ribosomal genes were compared. Results showed that although Cr(VI) was completely reduced by the three consortia, Cr(VI) inhibited cell growth, with sulfate-reducing bacteria being particularly sensitive to Cr(VI) toxicity relative to other bacteria in the consortia.     

Stratified microbial structure and activity within anode biofilm during electrochemically assisted brewery wastewater treatment

In a bioelectrochemical system (BES), microbial community of anode biofilm is crucial to BES performance. In this study, the stratified pattern of community structure and activity of an anode-respiring biofilm in a BES fueled with brewery wastewater was investigated over time. The anode biofilm exhibited a superior performance in the removal of ethanol to that of an open-circuit system. The electrical current density reached a high level of 0.55mA/cm² with a Coulombic efficiency of 71.4%, but decreased to 0.18mA/cm² in the late stage of operation. A mature biofilm developed a more active outer layer covering a less active inner core, although the activities of the outer and inner layers of biofilm were similar in the early stage. More Geobacter spp., typical exoelectrogens, were enriched in the outer layer than in the inner layer of biofilm in the early stage, while more Geobacter spp. were distributed in the inner layer than in the outer layer in the late stage. The inactive and Geobacter-occupied inner layer of biofilm might be responsible for the decreased electricity generation from wastewater in the late stage of operation. This study provides better understanding of the effect of anode biofilm structure on BES performance.     

Biotreatment of acidic zinc- and copper-containing wastewater using ethanol-fed sulfidogenic anaerobic baffled reactor

The treatment of acidic (pH 6.5–3), sulfate- (2–3 g/L), Zn- and Cu- (total metal 0–500 mg/L) containing wastewater was studied in a four-stage anaerobic baffled reactor (ABR) at 35 °C for 250 days. Ethanol was supplemented (COD/SO₄ ²⁻ = 0.67) as carbon and electron source for sulfate reducing bacteria. Sulfate reduction, COD oxidation and metal precipitation efficiencies were 70–92, 80–94 and >99%, respectively. The alkalinity produced from sulfidogenic ethanol oxidation increased the wastewater pH from 3.0 to 7.0–8.0. The electron flow from organic oxidation to sulfate averaged 87%. Decreasing feed pH to 3 and increasing total metal concentrations to 500 mg/L did not adversely affect the performance of ABR and sufficient alkalinity was produced to increase the effluent pH to neutral values. More than 99% of metals were precipitated in the form of metal-sulfides. Accumulation of precipitated metals in the first compartment allowed metal recovery without disturbing reactor performance seriously.     

微生物生物膜研究的新进展

微生物在生长过程中为适应生存环境而形成了生物膜,Dr.Costerton JW在生物膜方面的研究为我们开拓了微生物学的新领域。微生物生物膜是由微生物群体及其包被的细胞外多聚物和基质网组成,它们彼此黏附或者黏附到组织或物体的表面。微生物生物膜与微生物的耐药性形成、基因的转移以及引起机体的持续性感染等都密切相关。目前对生物膜的研究重点已经深入到微生物相互间的信号传递、致病基因的转移以及如何干预微生物生物膜的形成等方面。此外,在治理污水和环境保护工程、生物材料工程和食品工业等方面,微生物生物膜技术已经得到了应用。     

Kinetic model for dynamic response of three-phase fluidized bed biofilm reactor for wastewater treatment

Step changes in inlet concentration has been introduced into the completely mixed three-phase fluidized bed biofilm reactor treating simulated domestic wastewater to study the dynamic behavior of the system and to establish the suitable kinetic model from the response curve. Three identical reactors having different biomass volumes were operated in parallel. It was found that the response curves showed second-order characteristics, and thus at least two first-order differential equations are necessary to simulate the substrate and biomass response curves. Nonlinear regression analysis was performed using different types of rate equations and their corresponding kinetic parameters were used to simulate the theoretical response curve using the Runge–Kutta numerical integration method. As a result, although various types of conventional biokinetic models such as Monod, Haldane and Andrew types were examined, all the theoretical substrate response curves underestimated time constants compared to the actual substrate response plots. On the other hand, the theoretical curve of the kinetic model that incorporates adsorption term has best fit to the actual response in most of the cases. Thus, it was concluded that adsorption of substrate onto biofilm and carrier particles has significant effect on the dynamic response in biofilm processes.     

Viability of a marine microbial biofilm

The formation of a microbial biofilm on glass surfaces arranged in lamellar piles parallel with circulating sea water (3 cm·sec^–1) was studied. The increase in dry weight, protein content, nucleotide content (ATP, ADP), and diatoms was followed over a period of 62 days. Dry weight and protein were estimates of the total biofilm development, whereas the nucleotide measurements revealed the viability of the biofilm and reflected the dynamics in the community structure.     

生物膜型污水脱氮系统中膜结构及微生物生态研究进展

生物膜法污水脱氮系统主要利用生物膜中脱氮功能微生物的代谢活动去除氮素,从而达到净化水质的目的,研究脱氮生物膜的微观结构和微生物生态是揭示生物膜脱氮机理从而提高脱氮效率的重要途径.本文综述了生物膜型污水脱氮系统类型、生物膜微观结构特征及其影响因素、生物膜型污水脱氮系统内氮素传质过程、脱氮机理和生物膜数学模型等方面的研究进展.另外,本文介绍了生物膜型污水脱氮系统内生物膜脱氮功能微生物分布特征,不同生物膜脱氮系统、底物、运行条件和时间对功能微生物群落影响,及新型脱氮功能微生物等方面的研究进展,为生物膜脱氮技术的深入研究提供参考.     

Performance of sulfidogenic anaerobic baffled reactor (ABR) treating acidic and zinc-containing wastewater

The applicability of anaerobic baffled reactor (ABR) was investigated for the treatment of acidic (pH 4.5–7.0) wastewater containing sulfate (1000–2000 mg/L) and Zn (65–200 mg/L) at 35 °C. The ABR consisted of four equal stages and lactate was supplemented (COD/SO₄²⁻ = 0.67) as carbon and energy source for sulfate reducing bacteria (SRB). The robustness of the system was studied by decreasing pH and increasing Zn, COD, and sulfate loadings. Sulfate-reduction efficiency quickly increased during the startup period and reached 80% within 45 days. Decreasing feed pH, increasing feed sulfate and Zn concentrations did not adversely affect system performance as sulfate reduction and COD removal efficiencies were within 62–90% and 80–95%, respectively. Although feed pH was steadily decreased from 7.0 to 4.5, effluent pH was always within 6.8–7.5. Over 99% Zn removal was attained throughout the study due to formation of Zn-sulfide precipitate.     

Adaptive response of microbial communities to soluble microbial products

We carried out two experiments to study the influence of soluble microbial products (SMP) on biomass concentration [defined as mixed liquor suspended solids (MLSS)] and removal of soluble biological and chemical oxygen demands (sBOD₅ and sCOD): (1) SMP were allowed to accumulate, and (2) SMP content was artificially reduced by washing the biomass. The daily initial sCOD in both experiments was kept constant at 859±6 mg/l for 16 days. In experiment 1, the highest sCOD removal (80%) occurred during the first day. Thereafter, it decreased successively to 40% [sludge retention time (SRT), 12 days], after which it increased steadily to 50±4%. Variations in residual sCOD were accompanied by variations in sBOD₅, showing that the biodegradability of the accumulated SMP components was changing. MLSS fluctuated within the range 1,200±25–1,993±58 mg/l. We attributed the irregular accumulation of the biomass to variations in the biodegradability of SMP components. The initial sBOD₅/MLSS ratio varied according to variations in initial sBOD₅ and MLSS, whereas the residual ratio was constant at 0.025±0.008. This indicated a direct relationship between the concentrations of biomass and SMP produced. In experiment 2, MLSS increased from 1,200±25 to a constant value (2,810±16 mg/l; SRT, 12 days). After this time, no decrease or increase in MLSS was observed. Correspondingly, sCOD and sBOD₅ removal increased from 80–97 to 84–99%. A stable microbial community that could consume organic matter efficiently was developed under these conditions.     

Qualitative and quantitative spectrometric evaluation of soluble microbial products formation in aerobic granular sludge system treating nitrate wastewater

Bioprocess and Biosystems Engineering - In present study, the characteristics of soluble microbial products (SMP) were evaluated in aerobic granular sludge system during denitrification process...     

Managing microbial communities in membrane biofilm reactors

Membrane biofilm reactors (MBfRs) deliver gaseous substrates to biofilms that develop on the outside of gas-transfer membranes. When an MBfR delivers electron donors hydrogen (H₂) or methane (CH₄), a wide range of oxidized contaminants can be reduced as electron acceptors, e.g., nitrate, perchlorate, selenate, and trichloroethene. When O₂ is delivered as an electron acceptor, reduced contaminants can be oxidized, e.g., benzene, toluene, and surfactants. The MBfR’s biofilm often harbors a complex microbial community; failure to control the growth of undesirable microorganisms can result in poor performance. Fortunately, the community’s structure and function can be managed using a set of design and operation features as follows: gas pressure, membrane type, and surface loadings. Proper selection of these features ensures that the best microbial community is selected and sustained. Successful design and operation of an MBfR depends on a holistic understanding of the microbial community’s structure and function. This involves integrating performance data with omics results, such as with stoichiometric and kinetic modeling.