Molecularly imprinted polyaniline molecular receptor–based chemical sensor for the electrochemical determination of melamine

Molecularly imprinted polymer‐modified glassy carbon electrode (GCE)‐based electrochemical sensor is prepared using the electropolymerization of aniline in the presence of melamine (MA) as a template. In this work, the advantages of molecularly imprinted conducting polymers (MICPs) and electroanalytical methods were combined to obtain an electronic device with better performances. The sensor performance was evaluated by cyclic voltammetry (CV) and square wave voltammetry (SWV) with the linear range of 0.6‐16 × 10^?9M, quantification limit of 14.9 × 10^?10M, and detection limit of 4.47 × 10^?10M (S/N = 3). The selectivity of the sensor was tested in the presence of acetoguanamine (AGA), diaminomethylatrazine (DMT), casein, histidine, and glycine interfering molecules taken at the triple concentration with MA that demonstrated too small current response compared with that of the analyte indicating high specificity of the sensor towards the template. The sensor was successfully applied to determine MA in infant formula samples with significant recovery greater than 96% and relative standard deviation (RSD) less than 4.8%. Moreover, the good repeatability, recyclability, and stability make this sensor device promising for the real‐time monitoring of MA in different food stuffs.     

The effect of synthesis media on the properties of substituted polyaniline/chitosan composites

Substituted polyaniline/chitosan (sPANI/Ch) composites were chemically synthesized in H₂SO₄ and CH₃COOH synthesis media. Structural and physical properties of the composites were characterized by using FTIR, SEM, TGA, UV–vis, XRD techniques, and conductivity measurements. The effect of synthesis media on morphology, thermal stability, conductivity, and crystalline properties was investigated. Chemical interactions between substituted polyanilines and chitosan were explained using FTIR spectra results. The different morphological surfaces were observed in SEM images of the composites. The size of the substituted polyaniline/chitosan (sPANI/Ch) composites was in nanoscale, and the composites synthesized in acetic acid media showed smaller structures than those of H₂SO₄ media and pure chitosan. It was interpreted from XRD results that the composites have amorphous structure and the PNEANI/Ch–CH₃COOH composite has the highest crystallinity.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Novel Electrochemical Method for the Characterization of the Degree of Chirality in Chiral Polyaniline

A novel method to indicate the degree of chirality in polyaniline (PANI) was developed. The ( d ‐camphorsulfonic acid)‐ and (HCl)‐PANI‐based electrodes exhibited significantly different electrochemical performances in d ‐ and l ‐Alanine (Ala) aqueous solution, respectively, which can be used for the characterization the optical activity of chiral PANI. Cyclic voltammogram, tafel, and open circuit potential of PANI‐based electrodes were measured within d ‐ and l ‐Ala electrolyte solution, respectively. The open circuit potentials under different reacting conditions were analyzed by Doblhofer model formula, in which [C⁺]_poly1/[C⁺]_poly2 was used as a parameter to characterize the degree of chirality in chiral PANI. The results showed that [C⁺]_poly1/[C⁺]_poly2 can be increased with increasing concentrations of (1S)‐(+)‐ and (1R)‐(?)‐10‐camphorsulfonic acid. In addition, we detected that appropriate response time and lower temperature are necessary to improve the degree of chirality. Chirality 25:39‐42, 2013.© 2012 Wiley Periodicals, Inc.     

Molecularly imprinted polyaniline film for ascorbic acid detection

Molecularly imprinted polyaniline (PANI) film (～ 100 nm thick) has been electrochemically fabricated onto indium-tin-oxide (ITO) coated glass plate using ascorbic acid (AA) as template molecule. Fourier transform infra-red spectroscopy, scanning electron microscopy, cyclic voltammetry and differential pulse voltammetry (DPV) studies indicate the presence of AA in PANI matrix, which also acts as a dopant for PANI. Further, the AA selective molecularly imprinted PANI electrode (AA-MI-PANI/ITO) has been developed via over-oxidation of AA doped PANI electrode which leads to the removal of AA moieties from PANI film. The response studies using DPV technique have revealed that this molecularly imprinted AA-MI-PANI/ITO electrode can detect AA in the range of 0.05-0.4 mM with detection limit of 0.018 mM and sensitivity of 1.2 × 10(-5) AmM(-1). Interestingly, this AA-MI-PANI/ITO electrode shows excellent reusability, selectivity and stability.     

金纳米棒-聚苯胺核壳纳米材料的光学相干层析成像能力研究

对比试剂的使用能够显著提升光学相干层析(OCT)的成像效果。聚苯胺(PANI)是一种有机导电聚合物,在近红外(NIR)区有着很强的光吸收。本文采用PANI对常见的OCT成像对比试剂--金纳米棒(GNRs)进行修饰,合成了PANI/GNRs核壳粒子,并对其OCT成像对比能力进行了研究。PANI/GNRs展现出良好的NIR光吸收特性;同时,PANI对GNRs的包裹也显著提升了金纳米结构的稳定性、降低了GNRs原有的毒性。选用离体猪肝组织作为检测样本,发现纳米材料使用能够显著提升OCT的成像效果。与未修饰的GNRs及PANI粒子相比,PANI/GNRs的OCT成像对比效果明显更好。因此,PANI包裹的GNRs核壳纳米材料有望成为一种低毒性且效果良好的OCT对比试剂用于生物组织成像。     

A Novel Sustainable Flour Derived Hierarchical Nitrogen‐Doped Porous Carbon/Polyaniline Electrode for Advanced Asymmetric Supercapacitors

Hierarchically porous nitrogen‐doped carbon (HPC)/polyaniline (PANI) nanowire arrays nanocomposites are synthesized by a facile in situ polymerization. 3D interconnected honeycomb‐like HPC was prepared by a cost‐effective route via one‐step carbonization using urea and alkali‐treated wheat flour as carbon precursor with a high specific surface area (1294 m² g^?1). The specific capacitances of HPC and HPC/PANI (with a surface area of 923 m² g^?1) electrode are 383 and 1080 F g^?1 in 1 m H₂SO₄, respectively. Furthermore, an asymmetric supercapacitor based on HPC/PANI as positive electrode and HPC as negative electrode is successfully assembled with a voltage window of 0–1.8 V in 1 m Na₂SO₄ aqueous electrolyte, exhibiting high specific capacitance (134 F g^?1), high energy density (60.3 Wh kg^?1) and power density (18 kW kg^?1), and excellent cycling stability (91.6% capacitance retention after 5000 cycles).     

3D Ferroconcrete‐Like Aminated Carbon Nanotubes Network Anchoring Sulfur for Advanced Lithium–Sulfur Battery

To address the serious capacity fading in lithium–sulfur batteries, a 3D ferroconcrete‐like aminated carbon nanotubes network with polyaniline coating as an effective sulfur host to contain polysulfide dissolution is presented here. In this composite, the cross‐linked aminated carbon nanotubes framework provides a fast charge transport pathway and enhancement in the reaction kinetics of the active material to greatly improve the rate capability and sulfur utilization. The ethylenediamine moieties provide strong adhesion of polar discharge products to nonpolar carbon surfaces and thus efficiently prevent polysulfide dissolution to improve the cycle stability, confirmed by density functional theory calculations. The outside polyaniline layers structurally restrain polysulfides to prevent the shuttle effect and active material loss. Benefiting from these advantages, the synthesized composite exhibits a high initial capacity of 1215 mAh g^?1 and a capacity of 975 mAh g^?1 after 200 cycles at 0.2 C. Even after 200 cycles at 0.5 C, a capacity of 735 mAh g^?1 can be maintained, among the best performance reported. The strategy in this work can shed some light on modifying nonpolar carbon surfaces via the amination process to chemically attach sulfur species for high‐performance lithium–sulfur batteries.