糙皮侧耳（平菇）疏水蛋白的分离纯化及其界面自组装特性研究

从糙皮侧耳Pleurotus ostreatus Pm039菌丝体中分离纯化到一种疏水蛋白并命名为Po.HYD1,SDS-PAGE显示其分子量约15kDa。Po.HYD1具有高度的表面活性,100μg/mL浓度下能够降低水表面张力至25.5mN/m。在1~100μg/mL浓度范围内存在6μg/mL和24μg/mL两个关键浓度,说明了不同浓度范围内自组装条件的改变。水接触角测定证明了Po.HYD1自组装膜的包被能够逆转固体表面的可湿润性。原子力显微镜分析揭示了Po.HYD1在云母表面形成厚度4.2±0.1nm"小杆层";在高定向热裂解石墨表面形成厚度3.2~3.8nm吸附层;在剧烈振荡诱导下的水溶液中形成形状相似、取向一致但体积大小不等的"耳型"颗粒。     

Surface adhesion of fusion proteins containing the hydrophobins HFBI and HFBII from Trichoderma reesei

Hydrophobins are surface-active proteins produced by filamentous fungi, where they seem to be ubiquitous. They have a variety of roles in fungal physiology related to surface phenomena, such as adhesion, formation of surface layers, and lowering of surface tension. Hydrophobins can be divided into two classes based on the hydropathy profile of their primary sequence. We have studied the adhesion behavior of two Trichoderma reesei class II hydrophobins, HFBI and HFBII, as isolated proteins and as fusion proteins. Both hydrophobins were produced as C-terminal fusions to the core of the hydrolytic enzyme endoglucanase I from the same organism. It was shown that as a fusion partner, HFBI causes the fusion protein to efficiently immobilize to hydrophobic surfaces, such as silanized glass and Teflon. The properties of the surface-bound protein were analyzed by the enzymatic activity of the endoglucanase domain, by surface plasmon resonance (Biacore), and by a quartz crystal microbalance. We found that the HFBI fusion forms a tightly bound, rigid surface layer on a hydrophobic support. The HFBI domain also causes the fusion protein to polymerize in solution, possibly to a decamer. Although isolated HFBII binds efficiently to surfaces, it does not cause immobilization as a fusion partner, nor does it cause polymerization of the fusion protein in solution. The findings give new information on how hydrophobins function and how they can be used to immobilize fusion proteins.     

Surface functionalization of carbon nanomaterials by self‐assembling hydrophobin proteins

Class I fungal hydrophobins are small surface‐active proteins that self‐assemble to form amphipathic monolayers composed of amyloid‐like rodlets. The monolayers are extremely robust and can adsorb onto both hydrophobic and hydrophilic surfaces to reverse their wettability. This adherence is particularly strong for hydrophobic materials. In this report, we show that the class I hydrophobins EAS and HYD3 can self‐assemble to form a single‐molecule thick coating on a range of nanomaterials, including single‐walled carbon nanotubes (SWCNTs), graphene sheets, highly oriented pyrolytic graphite, and mica. Moreover, coating by class I hydrophobin results in a stable, dispersed preparation of SWCNTs in aqueous solutions. No cytotoxicity is detected when hydrophobin or hydrophobin‐coated SWCNTs are incubated with Caco‐2 cells in vitro. In addition, we are able to specifically introduce covalently linked chemical moieties to the hydrophilic side of the rodlet monolayer. Hence, class I hydrophobins provide a simple and effective strategy for controlling the surfaces of a range of materials at a molecular level and exhibit strong potential for biomedical applications. © 2012 Wiley Periodicals, Inc.     

Hydrophobins, from molecular structure to multiple functions in fungal development

Mycelial fungi secrete small, cysteine-rich, proteins, called hydrophobins, that self-assemble at hydrophilic-hydrophobic interfaces into amphipathic membranes, highly insoluble in case of Class I hydrophobins. By self-assembly at the culture medium-air interface they greatly lower the surface tension enabling emergent structures to grow into the air. By self-assembly at the interface between the hydrophilic cell wall and the air or any other hydrophobic environment, these emergent structures are coated with a hydrophobin membrane. These properties allow hydrophobins to fulfil a broad spectrum of functions in fungal development. They are involved in formation of aerial (reproductive) structures, in aerial dispersion of spores, and they line air channels within fruiting bodies with a hydrophobic coating, probably serving gas exchange. Hydrophobins also mediate hyphal attachment to hydrophobic surfaces such as those of plants. Moreover, they appear involved in complex interhyphal interactions, and in interactions with algae in lichens. Their resistance towards chemical and enzymatic treatments suggests that assembled hydrophobins also protect fungal emergent structures against adverse environmental conditions.     

Protein body formation in leaves of Nicotiana benthamiana: a concentration‐dependent mechanism influenced by the presence of fusion tags

Protein bodies (PBs) are endoplasmic reticulum (ER) derived organelles originally found in seeds whose function is to accumulate seed storage proteins. It has been shown that PB formation is not limited to seeds and green fluorescent protein (GFP) fused to either elastin‐like polypeptide (ELP) or hydrophobin (HFBI) fusion tags induce the formation of PBs in leaves of N. benthamiana. In this study, we compared the ELP‐ and HFBI‐induced PBs and showed that ELP‐induced PBs are larger than HFBI‐induced PBs. The size of ELP‐ and HFBI‐induced PBs increased over time along with the accumulation levels of their fused protein. Our results show that PB formation is a concentration‐dependent mechanism in which proteins accumulating at levels higher than 0.2% of total soluble protein are capable of inducing PBs in vivo. Our results show that the presence of fusion tags is not necessary for the formation of PBs, but affects the distribution pattern and size of PBs. This was confirmed by PBs induced by fluorescent proteins as well as fungal xylanases. We noticed that in the process of PB formation, secretory and ER‐resident molecules are passively sequestered into the lumen of PBs. We propose to use this property of PBs as a tool to increase the accumulation levels of erythropoietin and human interleukin‐10 by co‐expression with PB‐inducing proteins.     

Scale‐up of hydrophobin‐assisted recombinant protein production in tobacco BY‐2 suspension cells

Plant suspension cell cultures are emerging as an alternative to mammalian cells for production of complex recombinant proteins. Plant cell cultures provide low production cost, intrinsic safety and adherence to current regulations, but low yields and costly purification technology hinder their commercialization. Fungal hydrophobins have been utilized as fusion tags to improve yields and facilitate efficient low‐cost purification by surfactant‐based aqueous two‐phase separation (ATPS) in plant, fungal and insect cells. In this work, we report the utilization of hydrophobin fusion technology in tobacco bright yellow 2 (BY‐2) suspension cell platform and the establishment of pilot‐scale propagation and downstream processing including first‐step purification by ATPS. Green fluorescent protein‐hydrophobin fusion (GFP‐HFBI) induced the formation of protein bodies in tobacco suspension cells, thus encapsulating the fusion protein into discrete compartments. Cultivation of the BY‐2 suspension cells was scaled up in standard stirred tank bioreactors up to 600 L production volume, with no apparent change in growth kinetics. Subsequently, ATPS was applied to selectively capture the GFP‐HFBI product from crude cell lysate, resulting in threefold concentration, good purity and up to 60% recovery. The ATPS was scaled up to 20 L volume, without loss off efficiency. This study provides the first proof of concept for large‐scale hydrophobin‐assisted production of recombinant proteins in tobacco BY‐2 cell suspensions.     

Identification and analysis of differentially expressed cDNAs during nonself-competitive interaction between Phlebiopsis gigantea and Heterobasidion parviporum

The molecular factors regulating interspecific interaction between the saprotrophic biocontrol fungus Phlebiopsis gigantea and the conifer pathogen Heterobasidion parviporum were investigated. We constructed cDNA libraries and used expressed sequence tag analysis for the identification and characterization of genes expressed during the self and nonself-hyphal interaction. cDNA clones from either the pathogen or biocontrol agent were arrayed on nylon membrane filters and differentially screened with cDNA probes made from mycelia forming the barrage zone during nonself-interactions, mycelia growing outside the barrage zones or monocultures. BlastX analysis of the differentially expressed clones led to the identification of genes with diverse functions, including those with potential as virulence factors, such as hydrophobins. Because of the high sequence conservation (r2 = 0.81) between P. gigantea and H. parviporum, a selected number of genes from either fungus were used to monitor the expression profile under varying interaction conditions by virtual northern blot. The results are discussed with respect to the potential role of the induced genes during the nonself-competitive interaction for space and nutrients between P. gigantea and H. parviporum.     

Localization of Cladosporium fulvum hydrophobins reveals a role for HCf-6 in adhesion

Hydrophobins are amphipathic molecules which form part of fungal cell walls and extracellular matrices and perform a variety of roles in fungal growth and development. The tomato pathogen Cladosporium fulvum has six hydrophobin genes, HCf-1 to -6. We have devised an epitope tagging approach for establishing hydrophobin localization during growth in culture and in plants. In this paper we localize HCf-2, -3, -4 and -5 and compare the data to our previous observations for HCf-1 and -6. In culture, HCf-1, -2, -3 and 4 localize to conidia and also appear on aerial hyphae. HCf-4 is unique in that it appears on submerged hyphae. HCf-5 expression is tightly regulated and appears on aerial hyphae early on during growth. Only HCf-1, -3 and -6 were observed during infection; HCf-3 appears on both conidia and emerging germ tubes. We also show that HCf-6 is secreted and coats surfaces under and around growing hyphae and demonstrate the effect of deleting HCf-6 on the adhesion of germinating C. fulvum conidia to glass slides.