Nutrient responses to the liming of lake Gårdsjön

The acidified lakes Lake Gårdsjön and Lake Stora Hästevatten the reference lake have been monitored since 1979 and 1980 respectively. The lakes are situated in SW Sweden; in an area severly affected by acid deposition. Lake Gårdsjön was limed in spring 1982. This paper analyses changes in nutrient concentrations upon liming of Lake Gårdsjön. The liming of Lake Gårdsjön was followed by a slight increase in ammonium, nitrate, and dissolved organic nitrogen concentrations. A drastic decrease occurred in particulate nitrogen and particulate carbon, whereas dissolved organic carbon increased. Total phosphorus and particulate phosphorus concentrations were similar to pre-limed conditions. The long-term decrease in phosphorus concentration, exhibited by the reference lake, was not identified in Lake Gårdsjön after liming, but total phosphorus concentration was still less than half compared to Lake Gårdsjön in the early 1970's. Additional measures such as phosphorus fertilization, should in certain cases be considered in addition to liming if the goal is to restore lakes to their pre-acidic conditions.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Zosteric acid and salicylic acid bound to a low density polyethylene surface successfully control bacterial biofilm formation

The active moieties of the anti-biofilm natural compounds zosteric (ZA) and salicylic (SA) acids have been covalently immobilized on a low density polyethylene (LDPE) surface. The grafting procedure provided new non-toxic eco-friendly materials (LDPE-CA and LDPE-SA) with anti-biofilm properties superior to the conventional biocide-based approaches and with features suitable for applications in challenging fields where the use of antimicrobial agents is limited. Microbiological investigation proved that LDPE-CA and LDPE-SA: (1) reduced Escherichia coli biofilm biomass by up to 61% with a mechanism that did not affect bacterial viability; (2) significantly affected biofilm morphology, decreasing biofilm thickness, roughness, substratum coverage, cell and matrix polysaccharide bio-volumes by >80% and increasing the surface to bio-volume ratio; (3) made the biofilm more susceptible to ampicillin and ethanol. Since no molecules were leached from the surface, they remained constantly effective and below the lethal level; therefore, the risk of inducing resistance was minimized.     

Flavonoids enantiomer distribution in different parts of goldenrod (Solidago virgaurea L.), lucerne (Medicago sativa L.) and phacelia (Phacelia tanacetifolia Benth.)

Plant material is a rich source of valuable compounds such as flavanones. Their different forms influence bioavailability and biological activity, causing problems with the selection of plant material for specific purposes. The purpose of this research was to determine selected flavanone (eriodictyol, naringenin, liquiritigenin, and hesperetin) enantiomer contents in free form and bonded to glycosides by an RP‐UHPLC‐ESI‐MS/MS method. Different parts (stems, leaves, and flowers) of goldenrod (Solidago virgaurea L.), lucerne (Medicago sativa L.), and phacelia (Phacelia tanacetifolia Benth.) were used. The highest content of eriodictyol was found in goldenrod flowers (13.1 μg/g), where it occurred mainly as the (S)‐enantiomer, and the greatest proportion of the total amount was bonded to glycosides. The richest source of naringenin was found to be lucerne leaves (4.7 μg/g), where it was mainly bonded to glycosides and with the (S)‐enantiomer as the dominant form. Liquiritigenin was determined only in lucerne, where the flowers contained the highest amount (1.2 μg/g), with the (R)‐enantiomer as dominant aglycone form and the (S)‐enantiomer as the dominant glycosylated form. The highest hesperetin content was determined in phacelia leaves (0.38 μg/g), where it was present in the form of a glycoside and only as the (S)‐enantiomer. A comparison of the different analyte forms occurring in different plant parts was performed for the first time.     

肝素钠的生产及其存在的问题及解决的方法（Ⅱ）

本文就粗品肝素钠生产的原料控制硬件设施管理和环保等方面进行了论述，介绍了一些改进的方法和措施，并就该方面的的一些问题进行了探讨，提出了解决的方法。     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Feedbacks between nutrient cycling and vegetation predict plant species coexistence and invasion

To investigate the role of species‐specific litter decomposability in determining plant community structure, we constructed a theoretical model of the codevelopmental dynamics of soil and vegetation. This model incorporates feedback between vegetation and soil. Vegetation changes the nutrient conditions of soil by affecting mineralization processes; soil, in turn, has an impact on plant community structure. The model shows that species‐level traits (decomposability, reproductive and competitive abilities) determine whether litter feedback effects are positive or negative. The feedback determines community‐level properties, such as species composition and community stability against invasion. The model predicts that positive feedback may generate multiple alternative steady states of the plant community, which differ in species richness or community composition. In such cases, the realized state is determined by initial abundance of co‐occurring species. Further, the model shows that the importance of species‐level traits depends on environmental conditions such as system fertility.     

Continuity and Creativity in Iroquois Beadwork

This review essay of Across Borders: Beadwork in Iroquois Life focuses on the display of beadwork as a cultural practice that has evolved significantly throughout its history while remaining central to Iroquois identity. The exhibition draws on historical documentation, objects, and imagery that depict the varied uses of beadwork as ritual objects, sources of income, markers of identity, and as works of art. The content and narrative for the display was developed through a broad collaboration between curators, scholars, artists, and members of two Iroquois communities. The changing and continued importance of beadwork is reflected in the adaptation of materials and styles for different forms of production and use. Across Borders places Iroquois beadwork in a broad context while concentrating on specific forms and meanings that are attached to beadwork, whether created in community gatherings or by individual artists.     

Further evidence from sectioned material in support of the existence of a linear terminal complex in cellulose synthesis

Summary Transmembrane linear terminal complexes considered to be involved in the synthesis of cellulose microfibrils have been described in the plasma membrane ofBoergesenia forbesii. Evidence for the existence of these structures has been obtained almost exlusively using the freeze etching technique. In the present study an attempt has been made to complete these studies using conventional fixation, staining, and sectioning procedures. In developing cells ofBoergesenia forbesii, strongly stained structures traversing the plasma membrane and averaging 598.9 nm ± 171.3 nm in length, 28.7 nm ± 4.2 nm in width, and 35.2 nm ± 6.6 nm in depth have been demonstrated. These structures are considered to be linear terminal complexes. At their distal (cell wall) surface, they appear to be closely associated with cellulose microfibrils. At the proximal (cytoplasmic) surface, they are associated with microtubules and polysomes. A model of the possible interrelation of the terminal complexes and microtubules leading to the generation of cell wall microfibrils is proposed.