Nonthermal Plasma‐Induced Degradation of Morin and Enhancement of Biological Activities

In the present study, non‐thermal dielectric barrier discharge (DBD) plasma of induced structural changes of morin resulted in the isolation of one previously undescribed benzofuranone derivative, along with two known compounds. The chemical structures of these degradation products were elucidated by UV, NMR and FAB‐MS spectroscopic analyses. The isolated three compounds showed potent antioxidative activities in two different tests, with IC₅₀ values in the range of 12.9–41.8 μm in the 2,2′‐azino‐bis (3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS⁺) radical scavenging activity, 19.0–71.9 μm for hydroxyl radical scavenging activity test. Furthermore, the new methoxylated benzofuranone exhibited enhancement of inhibitory effects against pancreatic lipase with an IC₅₀ value of 90.7±1.6 μm , when compared to the parent morin. These results suggested that the degradation products isolated from plasma exposed morin might be beneficial for prevention of obesity and related diseases.     

Cyanobacteria passage through drinking water filters during perturbation episodes as a function of cell morphology, coagulant and initial filter loading rate

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 °C using two coagulant combinations (aluminum sulfate and cationic polymer or ferric chloride and cationic polymer), two initial filter loading rates (7 or 10 m/h) and two species of morphologically different cyanobacteria (Microcystis aeruginosa or Anabaena flos aquae). The filter was perturbed by instantaneously increasing the hydraulic loading rate by 50%. Filter influent and effluent water qualities were characterized by measuring turbidity, particles and chlorophyll a. The observed post-perturbation filter effluent chlorophyll a peaks were 1.6–48 times greater than the pre-perturbation averages. Chlorophyll a peaks were larger for M. aeruginosa than for A. flos aquae. Chlorophyll a peaks were also larger for the higher (10 m/h) than for the lower (7 m/h) initial filter loading rate. The post-perturbation effluent turbidity peaks were 1.4–7.2 times greater than the pre-perturbation averages. The post-perturbation effluent particle peaks were 6.5–25 times greater than the pre-perturbation averages. These results indicate that particles were a more sensitive indicator of cyanobacterial passage than turbidity.     

Hyperthermic treatment of chromomycosis with disposable chemical pocket warmers

A case of chromomycosis in which hyperthermia proved effective is reported. The patient was a 56-year-old male bean curd maker who, without any previous history of minor trauma, developed on the extensor side of the left upper arm an eczematous lesion that underwent gradual radial expansion. The lesion showed a well-defined, 7×10 cm infiltrated erythematous plaque with the central area healed and, at the upper and lower borders, adherent scales and crusts on the surface. Histological examination revealed granulomatous changes in the dermis, as well as sclerotic cells within giant cells and microabscesses. On culturing,Fonsecaea pedrosoi was isolated. The patient was treated with disposable chemical pocket warmers, which were secured over the lesion with a rather tight elastic bandage, so that they kept the affected area warm for 24 hours a day. After a month of such hyperthermic treatment, the erythema and infiltration had decreased considerably, and microscopic examination and culture of the crusts both yielded negative results. Examination of biopsy specimens of the lesion after the third month showed that it had cicatrized. The treatment was stopped after 4 months, and no relapse occurred. We also summarize the published results of local hyperthermic treatment of chromomycosis in Japan.     

Methods for rapid screening and isolation of bacteria producing acidic lipase: feasibility studies and novel activity assay protocols

Acidic lipase finds its commercial values in medical applications and bioremediation of food wastes. In this work, approaches for rapid screening of lipase-producing bacteria were developed and the feasibility assessment of the screening methods was performed. From food waste samples, the proposed screening procedures allowed isolation of sixteen pure bacterial strains expressing higher lipase activity at acidic pH (pH 6.0) than at alkaline pH (pH 9.0). To enhance the accuracy of lipase activity determination under acidic conditions, a novel assay procedure was also developed by deactivating lipase activity by microwave treatment prior to back titration. This additional step could minimize interferences arising from residual lipase activity during conventional direct back-titration methods in measuring lipase activity at acidic pH. Using the four strategies proposed in this work, the best acidic-lipase-producing isolate was obtained by strategy C (SSC) and was identified as Aeromonas sp. C14, displaying an optimal lipase activity of 0.7 U/ml at an acidic pH of 6.0.     

Models for Trypanosoma evansi (surra), its control and economic impact on small-hold livestock owners in the Philippines

Simple demographic and infectious disease models of buffaloes and other domestic hosts for animal trypanosomosis (surra) caused by Trypanosoma evansi were developed. The animal models contained deterministic and stochastic elements and were linked to simulate the benefit of control regimes for surra in village domestic animal populations in Mindanao, Philippines. The impact of the disease on host fertility and mortality were key factors in determining the economic losses and net-benefit from the control regimes. If using a high (99%) efficacy drug in surra-moderate to high risk areas, then treating all animals twice each year yielded low prevalence in 2 years; targeted treatment of clinically sick animals, constantly monitored (monthly), required 75% fewer treatments but took longer to reach a low prevalence than treating all animals twice each year. At high drug efficacy both of these treatment strategies increased the benefit over untreated animals by 81%. If drug efficacy declined then the benefit obtained from twice yearly treatment of all animals declined rapidly compared with regular monitoring and targeting treatment to clinically sick animals. The current control regimen applied in the Philippines of annual sero-testing for surra and only treating sero-positive animals provided the lowest net-benefit of all the control options simulated and would not be regarded as effective control. The total net-benefit from effective surra control for a typical village in a moderate/high risk area was 7.9 million pesos per annum (US $158,000). The value added to buffaloes, cattle, horses, goats/sheep and pigs as a result of this control was US $88, $84, $151, $7, $114 per animal/year, respectively.     

Drugs,genes and screens: The ethics of preventing and treating spinal muscular atrophy

Spinal muscular atrophy (SMA) is the most common genetic disease that causes infant mortality. Its treatment and prevention represent the paradigmatic example of the ethical dilemmas of 21st-century medicine. New therapies (nusinersen and AVXS-101) hold the promise of being able to treat, but not cure, the condition. Alternatively, genomic analysis could identify carriers, and carriers could be offered in vitro fertilization and preimplantation genetic diagnosis. In the future, gene editing could prevent the condition at the embryonic stage. How should these different options be evaluated and compared within a health system? In this paper, we discuss the ethical considerations that bear on the question of how to prioritize the different treatments and preventive options for SMA, at a policy level. We argue that despite the tremendous value of what we call ‘ex-post’ approaches to treating SMA (such as using pharmacological agents or gene therapy), there is a moral imperative to pursue ‘ex-ante’ interventions (such as carrier screening in combination with prenatal testing and preimplantation genetic diagnosis, or gene editing) to reduce the incidence of SMA. There are moral reasons relating to autonomy, beneficence and justice to prioritize ex-ante methods over ex-post methods.     

Effects of alginate and resistant starch on feeding patterns,behaviour and performance in ad libitum-fed growing pigs

This study assessed the long-term effects of feeding diets containing either a gelling fibre (alginate (ALG)), or a fermentable fibre (resistant starch (RS)), or both, on feeding patterns, behaviour and growth performance of growing pigs fed ad libitum for 12 weeks. The experiment was set up as a 2×2 factorial arrangement: inclusion of ALG (yes or no) and inclusion of RS (yes or no) in the control diet, resulting in four dietary treatments, that is, ALG−RS− (control), ALG+RS−, ALG−RS+, and ALG+RS+. Both ALG and RS were exchanged for pregelatinized potato starch. A total of 240 pigs in 40 pens were used. From all visits to an electronic feeding station, feed intake and detailed feeding patterns were calculated. Apparent total tract digestibility of energy, dry matter (DM), and CP was determined in week 6. Pigs’ postures and behaviours were scored from live observations in weeks 7 and 12. Dietary treatments did not affect final BW and average daily gain (ADG). ALG reduced energy and DM digestibility (P<0.01). Moreover, ALG increased average daily DM intake, and reduced backfat thickness and carcass gain : digestible energy (DE) intake (P<0.05). RS increased feed intake per meal, meal duration (P<0.05) and inter-meal intervals (P=0.05), and reduced the number of meals per day (P<0.01), but did not affect daily DM intake. Moreover, RS reduced energy, DM and CP digestibility (P<0.01). Average daily DE intake was reduced (P<0.05), and gain : DE intake tended to be increased (P=0.07), whereas carcass gain : DE intake was not affected by RS. In week 12, ALG+RS− increased standing and walking, aggressive, feeder-directed, and drinking behaviours compared with ALG+RS+ (ALG×RS interaction, P<0.05), with ALG−RS− and ALG−RS+ in between. No other ALG×RS interactions were found. In conclusion, pigs fed ALG compensated for the reduced dietary DE content by increasing their feed intake, achieving similar DE intake and ADG as control pigs. Backfat thickness and carcass efficiency were reduced in pigs fed ALG, which also showed increased physical activity. Pigs fed RS changed feeding patterns, but did not increase their feed intake. Despite a lower DE intake, pigs fed RS achieved similar ADG as control pigs by increasing efficiency in DE use. This indicates that the energy utilization of RS in pigs with ad libitum access to feed is close to that of enzymatically digestible starch.     

Systems ecological accounting for wastewater treatment engineering: Method,indicator and application

Wastewater treatment facility is vital for sustainable urban development. In the course of removing contaminants and discharging ready-for-reuse water, wastewater treatment consumes resources and triggers environmental emission during its lifetime. A comprehensive framework to analyze the embodied ecological elements as natural resources and environmental emissions of wastewater treatment is presented in this work. The systems method as a combination of process and input–output analyses is applied and a set of indicators are accordingly devised. Two representative ecological elements, i.e., greenhouse gases emissions and solar emergy of alternative wastewater treatment systems, i.e., a traditional activated sludge wastewater treatment plant and a constructed wetland have been taken into consideration. For each ecological element, five indicators have been calculated and compared to assess the impact on climate change and resources utilizing style of the case systems. The framework raised in this paper is fully supportive for optimal decision-making among different wastewater treatment technologies, and could be transplanted to be applied to systems ecological accounting for other production systems.