Monitoring the process of HypF fibrillization and liposome permeabilization by protofibrils

Much information has appeared in the last few years on the low resolution structure of amyloid fibrils and on their non-fibrillar precursors formed by a number of proteins and peptides associated with amyloid diseases. The fine structure and the dynamics of the process leading misfolded molecules to aggregate into amyloid assemblies are far from being fully understood. Evidence has been provided in the last five years that protein aggregation and aggregate toxicity are rather generic processes, possibly affecting all polypeptide chains under suitable experimental conditions. This evidence extends the number of model proteins one can investigate to assess the molecular bases and general features of protein aggregation and aggregate toxicity. We have used tapping mode atomic force microscopy to investigate the morphological features of the pre-fibrillar aggregates and of the mature fibrils produced by the aggregation of the hydrogenase maturation factor HypF N-terminal domain (HypF-N), a protein not associated to any amyloid disease. We have also studied the aggregate-induced permeabilization of liposomes by fluorescence techniques. Our results show that HypF-N aggregation follows a hierarchical path whereby initial globules assemble into crescents; these generate large rings, which evolve into ribbons, further organizing into differently supercoiled fibrils. The early pre-fibrillar aggregates were shown to be able to permeabilize synthetic phospholipid membranes, thus showing that this disease-unrelated protein displays the same amyloidogenic behaviour found for the aggregates of most pathological proteins and peptides. These data complement previously reported findings, and support the idea that protein aggregation, aggregate structure and toxicity are generic properties of polypeptide chains.     

Conformational properties of the aggregation precursor state of HypF-N

The conversion of specific proteins or protein fragments into insoluble, ordered fibrillar aggregates is a fundamental process in protein chemistry, biology, medicine and biotechnology. As this structural conversion seems to be a property shared by many proteins, understanding the mechanism of this process will be of extreme importance. Here we present a structural characterisation of a conformational state populated at low pH by the N-terminal domain of Escherichia coli HypF. Combining different biophysical and biochemical techniques, including near- and far-UV circular dichroism, intrinsic and 8-anilinonaphthalene-1-sulfonate-derived fluorescence, dynamic light scattering and limited proteolysis, we will show that this state is largely unfolded but contains significant secondary structure and hydrophobic clusters. It also appears to be more compact than a random coil-like state but less organised than a molten globule state. Increase of the total ionic strength of the solution induces aggregation of such a pre-molten globule state into amyloid-like protofibrils, as revealed by thioflavin T fluorescence and atomic force microscopy. These results show that a pre-molten globule state can be, among other possible conformational states, one of the precursor states of amyloid formation. In addition, the possibility of triggering aggregation by modulating the ionic strength of the solution provides one a unique opportunity to study both the initial precursor state and the aggregation process.     

The two-fold aspect of the interplay of amyloidogenic proteins with lipid membranes

Investigating the pathways leading to the formation of amyloid protein aggregates and the mechanism of their cytotoxicity is fundamental for a deeper understanding of a broad range of human diseases. Increasing evidence indicates that early aggregates are responsible for the cytotoxic effects. This paper addresses the catalytic role of lipid surfaces in promoting aggregation of amyloid proteins and the permeability changes that these aggregates induce on lipid membranes. Effects of amyloid aggregates on model systems such as monolayers, vesicles, liposomes and supported lipid bilayers are reviewed. In particular, the relevance of atomic force microscopy in detecting both kinetics of amyloid formation and amyloid-membrane interactions is emphasized.     

The in vivo and in vitro aggregation properties of globular proteins correlate with their conformational stability: the SH3 case

Protein misfolding and deposition underlie an increasing number of debilitating human disorders and constitute a problem of major concern in biotechnology. In the last years, in vitro studies have provided valuable insights into the physicochemical principles underlying protein aggregation. Nevertheless, information about the determinants of protein deposition within the cell is scarce and only a few systematic studies comparing in vitro and in vivo data have been reported. Here, we have used the SH3 domain of α-spectrin as a model globular protein in an attempt to understand the relationship between protein aggregation in the test-tube and in the more complex cellular environment. The investigation of the aggregation in Escherichia coli of this domain and a large set of mutants, together with the analysis of their sequential and conformational properties allowed us to evaluate the contribution of different polypeptidic factors to the cellular deposition of globular proteins. The data presented here suggest that the rules that govern in vitro protein aggregation are also valid in in vivo contexts. They also provide relevant insights into intracellular protein deposition in both conformational diseases and recombinant protein production.     

Low-Level Expression of a Folding-Incompetent Protein in Escherichia coli: Search for the Molecular Determinants of Protein Aggregation In Vivo

Aggregation of peptides and proteins into insoluble amyloid fibrils or related intracellular inclusions is the hallmark of many degenerative diseases, including Alzheimer's disease, Parkinson's disease, and various forms of amyloidosis. In spite of the considerable progress carried out in vitro in elucidating the molecular determinants of the conversion of purified and isolated proteins into amyloid fibrils, very little is known on factors governing this process in the complex environment of living organisms. Taking advantage of increasing evidence that bacterial inclusion bodies consist of amyloid-like aggregates, we have expressed in Escherichia coli both wild type and 21 single-point mutants of the N-terminal domain of the E. coli protein HypF. All variants were expressed as folding-incompetent units in a controlled manner, at low and comparable levels. Their solubilities were measured by quantifying the protein amount contained in the soluble and insoluble fractions by Western blot analysis. A significant negative correlation was found between the solubility of the variants in E. coli and their intrinsic propensity to form amyloid fibrils, predicted using an algorithm previously validated experimentally in vitro on a number of unfolded peptides and proteins, and considering hydrophobicity, β-sheet propensity, and charge as major sequence determinants of the aggregation process. These findings show that the physicochemical parameters previously recognized to govern amyloid formation by fully or partially unfolded proteins are largely applicable in vivo and pave the way for the molecular exploration of a process as complex as protein aggregation in living organisms.     

Searching for conditions to form stable protein oligomers with amyloid-like characteristics: The unexplored basic pH

Conversion of peptides and proteins from their native states into amyloid fibrillar aggregates is the hallmark of a number of pathological conditions, including Alzheimer's disease and amyloidosis. Evidence is accumulating that soluble oligomers, as opposed to mature fibrils, mediate cellular dysfunction, ultimately leading to disease onset. In this study, we have explored the ability of alkaline pH solutions, which have remained relatively unexplored so far, to form a partially folded state of the N-terminal domain of the Escherichia coli protein HypF (HypF-N), which subsequently assembles to form stable soluble oligomers. Results showed that HypF-N unfolds at high pH via a two-state process. Characterization of the resulting alkaline-unfolded state by near- and far-UV circular dichroism, intrinsic and ANS-derived fluorescence and DLS indicated characteristics of a monomeric, premolten globule state. Interestingly, alkaline-unfolded HypF-N aggregates, at high concentration in the presence of low concentrations of TFE, into stable oligomers. These are able to bind amyloid-specific dyes, such as Congo red, ThT, and ANS, contain extensive β-sheet structure, as detected with far-UV circular dichroism, and have a height of 2.0–3.9 nm when analysed using atomic force microscopy. This study, which complements our previous one in which morphologically, structurally, and tinctorially similar oligomers were formed at low and nearly neutral pH values by the same protein, offers opportunities to explore the fine differences existing in the mechanism of formation of these species under different conditions, in their precise molecular structure and in their ability to cause cellular dysfunction.     

The folding process of acylphosphatase from Escherichia coli is remarkably accelerated by the presence of a disulfide bond

The acylphosphatase from Escherichia coli (EcoAcP) is the first AcP so far studied with a disulfide bond. A mutational variant of the enzyme lacking the disulfide bond has been produced by substituting the two cysteine residues with alanine (EcoAcP mutational variant C5A/C49A, mutEcoAcP). The native states of the two protein variants are similar, as shown by far-UV and near-UV circular dichroism and dynamic light-scattering measurements. From unfolding experiments at equilibrium using intrinsic fluorescence and far-UV circular dichroism as probes, EcoAcP shows an increased conformational stability as compared with mutEcoAcP. The wild-type protein folds according to a two-state model with a very fast rate constant (k_F^H2O = 72,600 s^− 1), while mutEcoAcP folds ca 1500-fold slower, via the accumulation of a partially folded species. The correlation between the hydrophobicity of the polypeptide chain and the folding rate, found previously in the AcP-like structural family, is maintained only when considering the mutant but not the wild-type protein, which folds much faster than expected from this correlation. Similarly, the correlation between the relative contact order and the folding rate holds only for mutEcoAcP. The correlation also holds for EcoAcP, provided the relative contact order value is recalculated by considering the disulfide bridge as an alternate path for the backbone to determine the shortest sequence separation between contacting residues. These results indicate that the presence of a disulfide bond in a protein is an important determinant of the folding rate and allows its contribution to be determined in quantitative terms.     

Effect of osmolytes on the fibrillation of HypF-N

We have studied the effect of a series of stabilizing and destabilizing osmolytes on the fibrillation pattern of a model amyloidogenic protein, HypF-N. Under mildly denaturing conditions, HypF-N forms cross β-sheet structures, characteristic of amyloid fibrils. In the presence of all stabilizing osmolytes except proline, fibrillation of HypF-N is inhibited. Notably, fibrillation kinetics is retarded at subdenaturing concentrations of chaotropes. In case of proline, fibrillation of HypF-N is accelerated. Thus, the changes during exposure of a protein to denaturing conditions in the presence of osmolyes cannot be extrapolated from their role as anti-fibrillation agents.