Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

The Effect of Sterilization, pH, Filler and Spore Inoculum Concentration on the Preparation of Alginate Pellets

Alginate encapsulation of an atoxigenic strain of Aspergillus flavus was studied in order to optimize encapsulation of fungal inocula with alginic acid. Sterilization by autoclaving is known to depolymerize sodium alginate. Buffered solutions (pH = 7-8) reduced this effect. Autoclaving the alginate solution with a filler/nutrient further inhibited the depolymerization reaction. Autoclaving under optimal conditions allowed a less expensive alginate (medium viscosity) to be used at a lower concentration (1%) to produce a stable product. The lowest cost pellets resulted from use of 1% medium viscosity sodium alginate with 10% cotton-seed meal. Further savings may be achieved by performing fermentations directly in alginate-nutrient mixtures and thus eliminating the mixing and blending steps. In such formulations, the nutrient composition and length of fermentation must be adjusted to prevent alginate hydrolysis. The ultimate composition of alginate pellets is influenced by the diffusion of nutrients during gelation. Up to 65% of water-soluble nutrients were lost from alginate pellets during gelation. Once pellets are introduced into the environment, organisms other than the formulated agent compete for pelleted nutrients. A minimum concentration of the biocontrol agent must be present to ensure the agent excludes competitors and successfully converts the nutrients to biomass. For A. flavus, 5000 spores g^-1 were required.     

Formulating Atoxigenic Aspergillus flavus for Field Release

A procedure was developed to encapsulate mycelia of an atoxigenic strain of Aspergillus flavus in alginate pellets for seeding into agricultural fields in order to reduce aflatoxin contamination via competitive exclusion. Kaolin, a clay filler commonly employed in alginate formulations, was detrimental to pellet performance as measured by spore yield. Corn cob grits, a by-product of the corn industry, was found to be an excellent replacement for kaolin. Of nine nutritive adjuvants tested, wheat gluten improved pellet performance the most, although gluten concentrations above 5% were difficult to process. The best formulation tested consisted of 1% sodium alginate, 5% corn cob grits and 5% wheat gluten. On a 'per gram' basis, this alginate formulation yielded more spores than either A. flavus sclerotia or colonized wheat seed. Pesticides were also tested as adjuvants with potential use for protecting pellets under field conditions. Only one (chloramphenicol) of four tested pesticides (the others were dichloran, rose Bengal and cyfluthrin) reduced pellet sporulation. Formulations with or without pesticide adjuvants retained similar spore yield potential during a 2-year storage at 8 C. However, spore production in stored products lagged behind that of fresh products. At 75% relative humidity (RH), pellet storage stability decreased with increasing temperature from 27 to 42 C. Pellet spore yield at 32 C decreased as RH decreased from 100 to 90%. Sporulation occurred at 90% RH but not at 88% RH. Spore yield varied widely in four field tests, and the cumulative spore yield was inversely correlated (r2= -0.798, P 0.01) with rainfall. The results suggest that alginate pellets may be effective formulations for delivery of atoxigenic A. flavus strains to furrow-irrigated cotton in desert environments, where aflatoxin contamination of cottonseed is most severe.     

Effect of inoculation withGlomus mosseae on nitrogen fixation by field grown soybeans

Summary This field study was undertaken to determine the effect of inoculation withGlomus mosseae on N₂ fixation and P uptake by soybean. The inoculation withGlomus mosseae was achieved using a new type of inoculant, alginate-entrapped (AE) endomycorrhizal fungus. N₂ fixation was assessed using the A value method. In P-fertilized plots, inoculation with AEGlomus mosseae increased the harvest index based on dry weight (+20%) and N content of seeds (+17%), the A value (+31%) and %N derived from fixation (+75%). Inoculation with AEGlomus mosseae decreased the coefficient of variation for the A value and for the dry weights of the different plant parts.     

Mechanical stabilization of guard cell protoplasts of Vicia faba

Guard cell protoplasts of Vicia faba were immobilized in cross-linked Ca-alginate. No visible morphological changes were detected under the light microscope over a period of 14 days. The entrapped cells reacted normally to changes of the external osmolarity by shrinking and swelling. Addition of the calcium complexing agent, citrate, led to dissolution of the matrix. After reequilibration with Ca ions the released cells regained their ability to swell and shrink in response to external stress. The released protoplasts could be stained with the vital dye, neutral which was accumulated in the vacuoles. It should also be noted that the protoplasts can be transported when immobilized.     

褐藻寡糖生物法制备研究进展 *

褐藻寡糖(alginate oligosaccharides,AOS)是褐藻胶的降解产物,具有抗氧化、调节免疫、调节血脂、促进细胞生长等生理活性,应用范围广泛。现有的AOS 制备法主要分为物理法、化学法和生物法。介绍AOS的生物法制备包括酶解、微生物全细胞发酵和生物合成法,基因工程的应用在改造产褐藻胶裂解酶的菌株以提高生物法效率方面具有重要意义。此外,规模化的AOS生物法制备案例进行了科学引证,并展望了未来 AOS规模化制备的发展方向,以期为 AOS 的工业化制备和应用提供参考。     

组织工程用纤维增强天然多糖水凝胶的进展

天然多糖水凝胶具有良好的生物相容性,然而其力学性能调节幅度小,无法满足组织工程应用巨大的需求。通过纤维增强法,不仅可显著提高天然多糖水凝胶的力学性能,还能调节复合水凝胶的降解性能、促进细胞粘附、增殖与分化行为及其组织沉积。常用的天然多糖组织工程水凝胶的纤维增强方法有物理共混法、化学作用法、静电驱动法与自组装法等。本文综述了纤维增强水凝胶的结构与功能特点,讨论了纤维增强对组织工程水凝胶的意义,以期对纤维增强组织工程水凝胶的发展起到促进作用。     

响应面法优化类芽胞杆菌HB172198产褐藻胶裂解酶发酵培养基

为了提高类芽胞杆菌新种HB172198产褐藻胶裂解酶活力,本研究采用响应面法对该菌株液体发酵培养基进行了优化实验。在单因素实验和Plackett-Burman试验筛选出海藻酸钠、胰蛋白胨、NaCl、MgSO4·7H2O等4个显著影响产酶因素的基础上,通过Box-Behnken设计及响应面法进行回归分析,得出产褐藻胶裂解酶最佳发酵培养基,其成分为:海藻酸钠7.50 g/L、胰蛋白胨13.57 g/L、NaCl 29.75 g/L、MgSO4·7H2O 0.08 g/L。优化条件下该菌株最大酶活性达14.60 U/mL,是优化前的1.87倍。本研究为菌株HB172198产褐藻胶裂解酶的大规模生产和工业应用提供了重要的理论依据。     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Oxygen supply strongly influences metabolic fluxes,the production of poly(3-hydroxybutyrate) and alginate,and the degree of acetylation of alginate in Azotobacter vinelandii

The aim of this study was to evaluate carbon flux in Azotobacter vinelandii using metabolic flux analysis (MFA) under high and low aeration conditions to achieve an improved understanding of how these changes could be related to alginate acetylation and PHB production. Changes in oxygen availability had a considerable impact on the metabolic fluxes and were reflected in the growth rate, the specific glucose consumption rate, and the alginate and PHB yields. The main differences at the metabolic flux level were observed in three important pathways. The first important difference was consistent with respiratory protection; an increase in the flux generated through the tricarboxylic acid (TCA) cycle for cultures grown under high aeration conditions (up to 2.61 times higher) was observed. In the second important difference, the fluxes generated through pyruvate dehydrogenase, phosphoenol pyruvate carboxykinase and pyruvate kinase, all of which are involved in acetyl-CoA metabolism, increased by 10, 43.9 and 17.5%, respectively, in cultures grown under low aeration conditions compared with those grown under high aeration conditions. These changes were related to alginate acetylation, which was 2.6 times higher in the cultures with limited oxygen, and the changes were also related to a drastic increase in PHB production. Finally, the glyoxylate shunt was active under both of the conditions that were tested, and a 2.79-fold increase was observed in cultures that were grown under the low aeration condition.