Accurate determination of mean cell volume by isotope dilution in erythrocyte populations with variable deformability.

Variations in erythrocyte deformability and morphology lead to artifacts in electronic determinations of mean cellular volume (MCV) by the aperture-impedance method. The micropipette-aspiration technique loses accuracy when applied to severely aberrant cells such as dense sickle cells. A new light-scattering technique requires that the cells be capable of undergoing isovolumetric sphering. In contrast, the isotope-dilution (ID) method measures absolute mean volume and is free of artifacts associated with abnormal deformability or morphology. It does not depend on any algorithms or correction factors and does not subject the cells to any stringent processing, not even centrifugation. The ID method can be used to determine the mean volume of red cells in hypo- or hypertonic media or in the presence of pharmacologic agents. It requires no more than a 1-ml aliquot of suspended cells at a hematocrit of at least 30%. The cells can be readily recovered, washed, and reused. Using EDTA labeled with 57Co as an extracellular space marker we have used ID to determine the MCV of fractionated normal human red blood cells (RBC), unfractionated RBC containing SS hemoglobin, and RBC from four other mammalian species. In the case of human RBC obtained from eight normal donors, we obtained mean MCV values (+/- SD) of 83.6 +/- 3.0, 87.5 +/- 3.9, and 76.5 +/- 5.3 fl for unfractionated and top and bottom 10% density fractions, respectively. The value 83.6 is significantly lower than the generally accepted range of 89-91 indicated by electronic analyzers calibrated against spun microhematocrits. The discrepancy of about 7% can account for the difference between mean cell hemoglobin concentration (MCHC) data determined by a calibrated Coulter Counter and corresponding data obtained with paired samples using a cyanmethemoglobin procedure specified in NCCLS Standard H15-A and corrected for trapped plasma.     

Release of ferulic acid from wheat bran by a ferulic acid esterase (FAE-III) from Aspergillus niger

Ferulic acid was efficiently released from a wheat bran preparation by a ferulic acid esterase from Aspergillus niger (FAE-III) when incubated together with a Trichoderma viride xylanase (a maximum of 95% total ferulic acid released after 5 h incubation). FAE-III by itself could release ferulic acid but at a level almost 24-fold lower than that obtained in the presence of the xylanase (2 U). Release of ferulic acid was proportional to the FAE-III concentration between 0.1 U and 1.3 U, but the presence of low levels of xylanase (0.1 U) increased the amount of ferulic acid released 6-fold. Total sugar release was not influenced by the action of FAE-III on the wheat bran, but the rate of release of the apparent end-products of xylanase action (xylose and xylobiose) was elevated by the presence of the esterase. The results show that FAE-III and the xylanase act together to break down feruloylated plant cell-wall polysaccharides to give a high yield of ferulic acid.     

Biomechanical and Morphometric Differences in Triticum aestivum Seedlings Differing in Rht Gene-Dosage

Biomechanical and morphometric comparisons among coleoptilesfrom wheat seedlings differing in Rht gene-dosage (Rht = 0,2, 4 doses) are presented in an effort to evaluate the influenceof Rht on the mechanics of soil penetration by this organ. Rhtis known to reduce seedling establishment compared to the wildtype. Data from 3–7-day-old seedlings indicate that Rhtreduces tissue elastic modulus E, increases the second momentof area I, and decreases the slenderness ratio (l/r) of coleoptiles.Rht-relatedchanges in E and I are such that the flexural stiffness of coleoptilesfrom Rht plants does not differ significantly from the wildtype-hence the growing coleoptiles of all three genotypes haveequivalent biomechanical capacity to penetrate the soil. Rhtreduction of coleoptile slenderness ratios confers a capacityto safely sustain higher axial compressive loads compared tocoleoptiles with equivalent flexural stiffness but higher ratios.However, wild type seedlings produce longer coleoptiles andlonger subcrown internodes than Rht seedlings. Longer coleoptilesdeliver the crown node closer to the top of the soil beforethe crown node extends beyond the lateral confinement of thecoleoptile. This reduces the potential for buckling of the subcrowninternode and leaves due to the compressive loading of soil.Rht affects a variety of mechanical features whose influenceis dependent upon the stage of seedling growth and the degreeof soil compaction. However, at equivalent depths of burialwhich exceed the maximum length of coleoptiles and moderatesoil compaction, Rht is biomechanically disadvantageous to seedlingestablishment. Wheat, germination, biomechanics, Rht-gene     

Progressive resistance training reduces myosin heavy chain coexpression in single muscle fibers from older men.

The purpose of this study was to examine myosin heavy chain (MHC) and myosin light chain (MLC) isoforms following 12 wk of progressive resistance training (PRT). A needle biopsy was taken from the vastus lateralis to determine fiber-type expression [ATPase (pH 4.54) and MHC/MLC] in seven healthy men (age = 74.0 +/- 1.8 yr). Subjects were also tested for 1-repetition maximum (1-RM), pre- and posttraining. The progressive knee extensor protocol consisted of three sets at 80% of 1-RM 3 days/wk for 12 wk. Freeze-dried, single muscle fibers were dissected for MHC and MLC analysis and then subjected to SDS-PAGE and silver staining, pre- and posttraining. MHC expression increased in the I (10.4%; P < 0.05) and decreased in I/IIa (9.0%; P < 0.05), I/IIa/x (0.9%; P < 0.05), and IIa/x (8.9%; P < 0.05) isoforms, with no change in the IIa and IIx isoforms, pre- vs. posttraining (total fibers = 3,059). The MLC(3f)-to-MLC(2) ratio did not change with the PRT in either the MHC I or MHC IIa isoforms (total fibers = 902), pre- to posttraining. ATPase fiber distribution did not significantly differ following training (I: 50. 4 +/- 6.7 vs. 51.9 +/- 7.9, IIa: 36.8 +/- 5.3 vs. 41.1 +/- 7.0, IIb: 12.8 +/- 5.6 vs. 7.0 +/- 4.0%; pre- vs. posttraining, respectively). 1-RM increased (51.9%; P < 0.05) from pre- to posttraining. The PRT provide a stimulus for alterations in MHC isoforms, which demonstrated a decrease in all hybrid isoforms and an increase in MHC I expression (not found in the ATPase results), unlike the MLC ratio (3:2), which was not altered with training.     

Contribution to the orchid flora of South Central Africa

11 new taxa (8 new species, 3 new varieties) ofOrchidaceae are described from South Central Africa, including data on their habitat and distribution and discussions of their systematic affinities.     

Inhibition of cell wall synthesis and acylation of the penicillin binding proteins during prolonged exposure of growing Streptococcus pneumoniae to benzylpenicillin

Growing cultures of an autolysis-defective pneumococcal mutant were exposed to [3H]benzylpenicillin at various multiples of the minimal inhibitory concentration and incubated until the growth of the cultures was halted. During the process of growth inhibition, we determined the rates and degree of acylation of the five penicillin-binding proteins (PBPs) and the rates of peptidoglycan incorporation, protein synthesis, and turbidity increase. The time required for the onset of the inhibitory effects of benzylpenicillin was inversely related to the concentration of the antibiotic, and inhibition of peptidoglycan incorporation always preceded inhibition of protein synthesis and growth. When cultures first started to show the onset of growth inhibition, the same characteristic fraction of each PBP was in the acylated form in all cases, irrespective of the antibiotic concentration. Apparently, saturation of one or more PBPs with the antibiotic beyond these threshold levels is needed to bring about interference with normal peptidoglycan production and cellular growth. Although it was not possible to correlate the inhibition of cell wall synthesis or cell growth with the degree of acylation (percentage saturation) of any single PBP, there was a correlation between the amount of peptidoglycan synthesized and the actual amount of PBP 2b that was not acylated. In cultures exposed to benzylpenicillin concentrations greater than eight times the minimal inhibitory concentration, the rates of peptidoglycan incorporation underwent a rapid decline when bacterial growth stopped. However, in cultures exposed to lower concentrations of benzylpenicillin (one to six times the minimal inhibitory concentration) peptidoglycan synthesis continued at constant rate for prolonged periods, after the turbidity had ceased to increase. We conclude that inhibition of bacterial growth does not require a complete inhibition or even a major decline in the rate of peptidoglycan incorporation. Rather, inhibition of growth must be caused by an as yet undefined process that stops cell division when the rate of incorporation of peptidoglycan (or synthesis of protein) falls below a critical value.