Movement of Amyloplasts in the Root Cap Cells of Geotropically Sensitive Roots

The root cap of Lepidium sativum under our culture conditions was found to contain 7 (or occasionally 8) storeys of starch-containing cells. In the youngest one (or two) of these storeys the amyloplasts are small and the cells appear embryonic. In the 6 non-embryonic storeys the amyloplasts are large. Upon inversion of the root, the amyloplasts in the 3 youngest of the 6 non-emhryonic storeys start falling toward the opposite end of the cell at about 72 μ per h (at 21 C), hut they maintain this speed for only 6 to 12 min, after which they virtually come to a stop. As a result, it takes 10 to 12 min before any of the amyloplasts get approximately as close to the ceiling as they were to the floor before the inversion; and this is true only of the 2 youngest of the non-embryonic storeys. When the root is placed horizontal, whether coming from the normal or the inverted position, the amyloplasts reach the lower, longitudinal wall in 15 min or less. The positions of the amyloplasts in the cells of the 3 oldest starch-containing storeys are erratic and show little, if any, dependency on the preceding time of inversion.     

Decarboxylation and transport of auxin in segments of sunflower and cabbage roots

Summary The movement of ¹⁴C from indole-3-acetic acid (IAA) ¹⁴C has been examined in 5 mm root segments of dark-grown seedlings of Helianthus annuus and Brassica oleracea. Contaminants from distilled water, phosphate buffer and the razor-blade cutter increase the decarboxylation of IAA-¹⁴C, and cutting of root segments results in an activation of IAA-destroying enzymes at the cut surfaces. When these sources of errors were eliminated the following was shown: a) Both in sunflower and cabbage there is a slight acropetal flux of ¹⁴C through the root segments into the agar receiver blocks. The amount of ¹⁴C found in the receiver blocks increases with the lenght of the transport period. b) When the root segments, after the transport period, are cut in two equal parts and these assayed separately, the amounts of ¹⁴C in the two parts indicate a greater acropetal than basipetal transport. c) The total radioactivity of the receiver blocks is in part due to IAA-¹⁴C and in part to ¹⁴CO₂, the latter being a result of enzymatic destruction of auxin. d) Addition of ferulic acid, an inhibitor of IAA oxidases, to the receiver blocks markedly inhibits the decarboxylation of IAA-¹⁴C and thus increases the amount transported. This effect is more pronounced after a 20 hr than after a 6 hr transport period.     

Cytochemical localization of myrosinase (β-thioglucosidase) in root tips ofSinapis alba

Summary A method for electron microscopic cytochemical localization of a-thioglucosidase (myrosinase) has been developed. Since sulphate is one of the products of the hydrolysis of sinigrin by myrosinase, it was felt that if the incubation was carried out in the presence of Pb⁺⁺-ions an insoluble precipitate of electron-dense PbSO₄ would be formed at the reaction sites. Following formaldehyde fixation a few different cell organelles in the extreme root tip ofSinapis alba showed reaction specificity for myrosinase but following glutaraldehyde fixation the enzymatic activity was inhibited. Biochemical tests of the isolated enzyme showed complete inhibition of the myrosinase by glutaraldehyde. Variations in the substrate concentration and incubation time indicated that the enzyme was confined to the dilated cisternae of the endoplasmic reticulum and in a limited extent to the mitochondria.     

Gravitropism and starch statoliths in an Arabidopsis mutant

The mutant TC 7 of Arabidopsis thaliana (L.) Heynh. has been reported to be starch-free and still exhibit root gravitropism (T. Caspar and B. G. Pickard 1989, Planta 177, 185–197). This is not consistent with the hypothesis that plastid starch has a statolith function in gravity perception. In the present study, initial light microscopy using the same mutant showed apparently starch-free statocytes. However, ultrastructural examination detected residues of amyloplast starch grains in addition to the starch-depleted amyloplasts. Applying a point-counting morphometric method, the starch grains in the individual amyloplasts in the mutant were generally found to occupy more than 20% and in a few cases up to 60% of the amyloplast area. In the wild type (WT) the starch occupied on average 98 % of the amyloplast area and appeared as densely packed grains. The amyloplasts occupied 13.9% of the area of the statocyte in the mutant and 23.3% of the statocyte area in the WT. Sedimentation of starch-depleted amyloplasts in the mutant was not detected after 40 min of inversion while in the WT the amyloplasts sedimented at a speed of 6 m · h^-1. The gravitropic reactivity and the curvature pattern were also examined in the WT and the mutant. The time-courses of root curvature in the WT and the mutant showed that when cultivated under standard conditions for 60 h in darkness, the curvatures were 83° and 44°, respectively, after 25 h of continuous stimulation in the horizontal position. The WT roots curved significantly more rapidly and with a more normal gravitropic pattern than those of the mutant. These results are discussed in relation to the results previously obtained with the mutant and with respect to the starch-statolith hypothesis.Abbreviation WT wild type This work was supported by grants from Norwegian Research Council for Science and the Humanities (NAVF) which we gratefully acknowledge. We would also like to thank Dr. Timothy Caspar, Michigan State University, East Lansing, USA, for providing us with the seeds of TC 75.     

The growth and gravitropic responses of wild-type and auxinresistant mutants of Arabidopsis thaliana

Growth and gravitropism have been studied in three mutant strains of Arabidopsis thaliana L, that are resistant to auxin-herbicide. Two of the mutations are allelic and recessive ( aux-1 and aux-2 ) and are unlinked to a dominant mutation, Dwf , which confers a very high level of auxin-resistance and is apparently lethal when homozygous. The aux-1 and Dwf strains have altered response to gravity whereas aux-2 appears to be gravitropically normal.
After 96 h in the normal, vertical position only minor differences in elongation were observed between roots of wild-type, aux-1 and aux-2 , but the hypocotyls of aux-1 were significantly retarded compared with the gravitropically normal aux-2 and wild-type. In the progeny of selfed Dwf plants, where both normal ( dwf ) and agravitropic ( Dwf ) seedlings are present, the Dwf seedlings had much longer roots and shorter hypocotyls than dwf ⁺. During 22 h of continuous stimulation the optimum angle for gravitropism in wild-type roots and hypocotyls was 135° (i.e. the organ points obliquely upwards), with decreasing responses in the order 90° and 45°. The agravitropic nature of the roots of aux-1 was confirmed as no significant response was obtained at any of the stimulation angles. In marked contrast, the negative gravitropic response of aux-1 hypocotyls was greater than the wild-type response in terms of the final angle attained at 22 h, but between 6 and 22 h the elongation rate was lower in aux-1 . After varying stimulation periods in the horizontal position, the curvature which had developed, decreased rapidly and almost disappeared during ensuing rotation on clinostats (2 and 4 rpm). Rotation on the clinostats had no effect on the agravitropic behaviour of aux-1 .     

Plant growth using EMCS hardware on the ISS

Under separate contracts with ESA (FUMO and ERM Study) and as a link in the development of the European Modular Cultivation System's (EMCS) functionality and biocompatibility, plant studies have been performed at The Plant Biocentre in Trondheim, Norway. The main goal was to test whether the breadboards containing the major components planned for use in the EMCS would be optimal for space experiments with plant material. The test plans and the experimental set-up for the verification of biocompatibility and biological functionality included the use of a few model plant species including cress (Lepidium sativum L.) and Arabidopsis thaliana. The plants were tested at different developmental levels of morphological and physiological complexity (illumination, life support, humidity control, water supply, observation, short- and long-term plant growth experiments and contamination prevention). Results from the tests show that the EMCS concept is useful for long duration plant growth on the ISS.     

Preparatory studies for the use of plant protoplasts in space research

An experiment using plant protoplasts has been accepted for the IML-1 mission to be flown on a space shuttle in 1991. Preparatory experiments include studies of cell wall formation, cell division, the effect of simulated weightlessness using fast and slow rotating clinostats, and the development and testing of hardware for the IML-1 mission. After 24 h at 25°C, protoplasts isolated from hypocotyls or leaves of rapeseed seedlings, or from carrot suspension cells, show 60, 20 and 15% cell wall formation, respectively. The time course of formation of the cell wall and cell division could be delayed by treatment at low temperatures or immobilization in alginate or agarose. This aspect is of importance in connection with problems of late access to the space shuttle before launch. At 4°C only 18% of the rapeseed hypocotyl protoplasts had formed cell walls after 24 h. Protoplasts immobilised in agarose or alginate gradually regain their cell division capacity and after 72 h the frequencies are 51 and 26%, respectively, compared to non-immobilised control protoplasts. A significant decrease in cell division activity is observed after rotation for 6 h on the slow clinostat. A similar effect is not observed on the fast clinostat. Protoplasts, cultured in the specially designed plant chamber for up to 14 days established cell aggregates which have further developed into plants.     

Simulated weightlessness and hyper-g results in opposite effects on the regeneration of the cortical microtubule array in protoplasts from Brassica napus hypocotyls

Enzymatic digestion of the cell wall of Brassica napus hypocotyls gave a heterogeneous suspension of protoplasts with the cortical microtubules (CMTs) randomly organised or CMTs organised in parallel. The effect of variable g- influences has been tested on CMT organisation. In contrast to the 1 g- protoplasts, which reorganised the CMTs into parallel arrays during the 96 h test period, the frequency of randomly-oriented CMTs in the protoplasts exposed to simulated weightlessness (0 g ) on a 2-D clinostat increased significantly during the same period. The opposite effect was obtained when the protoplasts were exposed to hyper -g (7 or 10 g ), where the reorganisation of the CMTs into parallel arrays was accelerated compared to the 1 and 0 g- protoplasts. These results indicate that a unidirectional gravity force is a necessity for the reorganisation of CMTs in protoplasts to parallel arrays and that CMTs act as responding elements that are able to sense different levels of gravity. Besides the inability of the protoplasts to reorganise the CMTs into parallel arrays, the quantity of CMTs in the individual protoplast decreased during 4 days of simulated weightlessness, both compared to the CMTs quantity in the protoplasts immediately after isolation and compared to the 1 g- and hyper -g- protoplasts after 24 and 48 h of g- exposure. The size of the protoplasts was also affected by the g- exposure. Protoplasts exposed to simulated 0 g increased significantly after 24 and 48 h, whereas the 1 g- and 10 g- protoplasts maintained the same size during the 48 h test period.     

Embryo-specific Proteins in <Emphasis Type="Italic">Cyclamen persicum</Emphasis> Analyzed with 2-D DIGE

Somatic embryogenesis can be used to produce artificial seeds of Cyclamen persicum, one of the most important ornamental plants for the European market, both as a potted plant in northern Europe and a bedding plant in the cool winters in southern Europe. The aim of this study was to obtain new insights into the molecular biology of somatic embryogenesis, which in turn can be useful for the improvement of tissue culture methodology. Total proteins were characterized from two isogenic cell lines of Cyclamen persicum, one that was embryogenic and one that never has shown any embryogenic capacity. The extracted proteins were separated by two-dimensional differential gel electrophoresis (2-D DIGE) and selected proteins were treated using the ETTAN Dalt Spot Handling Workstation. Protein identification was performed using MALDI-TOF-MS. More than 1200 Cyclamen proteins were detected; 943 proteins were common to both lines. The different protein patterns of the embryogenic and non-embryogenic cell lines were obvious: One hundred eight proteins were more abundant in the embryogenic cells, and 97 proteins in the non-embryogenic cells. Among the differentially expressed proteins, 128 were identified. MALDI-TOF-MS analysis enabled 27 spots to be proposed as candidates for embryo-specific proteins, as they were unique to the embryogenic cell line. The proteins identified are involved in a variety of cellular processes, including cell proliferation, protein processing, signal transduction, stress response, metabolism, and energy state, but the majority are involved in protein processing and metabolism. The main functions of the putative embryo-specific proteins have been discussed in proportion to their role in the somatic embryogenesis process. Electronic Supplementary Material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. R. Lyngved and J. Renaut contributed equally to this work.     

Development of a plant growth support system for experiments on the ISS

The European Modular Cultivation System (EMCS) is one of a wide range of laboratory modules under construction by ESA that will be placed on the International Space Station (ISS). In the present study the development and construction of an important component in the EMCS, the Plant Cultivation Container (PCC), is described. The PCC as a "flower pot" will automatically provide the plants with water and liquid nutrients as needed. The PCC is located inside the plant growth unit, the Experiment Container (EC), on the EMCS and interfaces with the EMCS. The essential parts of the PCC are a Peltier element, a micro valve, a monitoring RH sensor with an integrated platinum RTD temperature sensor, a RH sensor that detects air leaving the PCC and controls the peristaltic pump, a DC-DC board that provides correct current to the Peltier element, and a switch/connector board. The PCC is presently being tested out at ESTEC/ESA.