Preparation and Evaluation of Differently Sulfonated Styrene–Divinylbenzene Cross-linked Copolymer Cationic Exchange Resins as Novel Carriers for Drug Delivery

The differently sulfonated styrene–divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling. The resin characteristics were altered in relation to the degree of sulfonation, proving that differently sulfonated resins could be prepared. The behavior of chlorpheniramine (CPM) loading and in vitro release in the USP simulated gastric (SGF) and intestinal fluids (SIF) of the obtained resins were also evaluated. The CPM loaded in the resinates (drug-loaded resins) increased with the increasing degree of sulfonic group and hence the drug binding site in the employed resins. The CPM release was lower from the resins with the higher degree of sulfonic group due to the increase in the diffusive path depth. The CPM release was obviously lower in SGF than SIF because CPM, a weak base drug, ionized to a greater extent in SGF and then preferred binding with rather than releasing from the resins. In conclusion, the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Meloxicam Taste-Masked Oral Disintegrating Tablet with Dissolution Enhanced by Ion Exchange Resins and Cyclodextrin

The purpose of this study was to develop taste-masked oral disintegrating tablets (ODTs) using the combination of ion exchange resin and cyclodextrin, to mask the bitter taste and enhance drug dissolution. Meloxicam (MX) was selected as a model drug with poor water solubility and a bitter taste. Formulations containing various forms of MX (free drug, MX-loaded resin or resinate, complexes of MX and 2-hydroxypropyl-β-cyclodextrin (HPβCD) or MX/HPβCD complexes, and a mixture of resinate and MX/HPβCD complexes) were made and tablets were prepared by direct compression. The ODTs were evaluated for weight variation, thickness, diameter, hardness, friability, disintegration time, wetting time, MX content, MX release, degree of bitter taste, and stability. The results showed that thickness, diameter, weight, and friability did not differ significantly for all of these formulations. The tablet hardness was approximately 3 kg/in.², and the friability was less than 1%. Tablets formulated with resinate and the mixture of resinate and MX/HPβCD complexes disintegrated rapidly within 60 s, which is the acceptable limit for ODTs. These results corresponded to the in vivo disintegration and wetting times. However, only tablets containing the mixture of resinate and MX/HPβCD complexes provided complete MX dissolution and successfully masked the bitter taste of MX. In addition, this tablet was stable at least 6 months. The results from this study suggest that the appropriate combination of ion exchange resin and cyclodextrin could be used in ODTs to mask the bitter taste of drug and enhance the dissolution of drugs that are weakly soluble in water.     

Development of Chitosan-Based pH-Sensitive Polymeric Micelles Containing Curcumin for Colon-Targeted Drug Delivery

pH-sensitive N-naphthyl-N,O-succinyl chitosan (NSCS) and N-octyl-N,O-succinyl chitosan (OSCS) polymeric micelles carriers have been developed to incorporate curcumin (CUR) for colon-targeted drug delivery. The physical entrapment methods (dialysis, co­solvent evaporation, dropping, and O/W emulsion) were applied. The CUR-loaded micelles prepared by the dialysis method presented the highest loading capacity. Increasing initial amount of CUR from 5 to 40 wt% to polymer resulted in the increase in loading capacity of the polymeric micelles. Among the hydrophobic cores, there were no significant differences in the loading capacity of CUR-loaded micelles. The particle sizes of all CUR-loaded micelles were in the range of 120–338 nm. The morphology of the micelles changed after being contacted with medium with different pH values, confirming the pH-responsive properties of the micelles. The release characteristics of curcumin from all CUR-loaded micelles were pH-dependent. The percent cumulative release of curcumin from all CUR-loaded micelles in simulated gastric fluid (SGF) was limited to about 20%. However, the release amount was significantly increased after contacted with simulated intestinal fluid (SIF) (50–55%) and simulated colonic fluid (SCF) (60–70%). The released amount in SIF and SCF was significantly greater than the release of CUR from CUR powder. CUR-loaded NSCS exhibited the highest anti-cancer activity against HT-29 colorectal cancer cells. The stability studies indicated that all CUR-loaded micelles were stable for at least 90 days. Therefore, the colon targeted, pH-sensitive NSCS micelles may have potential to be a prospective candidate for curcumin delivery to the colon.     

Ultradeformable liposomes with terpenes for delivery of hydrophilic compound

Ultradeformable liposomes containing penetration enhancers were created to deliver NaFl. Vesicles were investigated for their particle size, zeta potential, NaFl entrapment efficiency (%EE), loading efficiency, and in vitro skin penetration. The vesicles obtained were spherical in shape, with a particle size of less than 100 nm and a negative surface charge (-6 to -11 mV). The %EE of NaFl loaded in vesicles ranged from 37 to 48%. Ultradeformable liposomes with monoterpenes (d-limonene, 1,8-cineole and geraniol) significantly improved NaFl penetration through the skin. Confocal laser scanning microscopy analysis confirmed skin-penetration results and was used to evaluate the behavior of hydrophilic compounds penetrating through the skin.     

Methylated N-(4-N,N-Dimethylaminobenzyl) Chitosan, a Novel Chitosan Derivative, Enhances Paracellular Permeability Across Intestinal Epithelial Cells (Caco-2)

The aim of this study was to investigate the effect of methylated N-(4-N,N-dimethylaminobenzyl) chitosan, TM-Bz-CS, on the paracellular permeability of Caco-2 cell monolayers and its toxicity towards the cell lines. The factors affecting epithelial permeability, e.g., degree of quaternization (DQ) and extent of dimethylaminobenzyl substitution (ES), were evaluated in intestinal cell monolayers of Caco-2 cells using the transepithelial electrical resistance and permeability of Caco-2 cell monolayers, with fluorescein isothiocyanate dextran 4,400 (FD-4) as a model compound for paracellular tight-junction transport. Cytotoxicity was evaluated with the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide viability assay. The results revealed that, at pH 7.4, TM-Bz-CS appeared to increase cell permeability in a concentration-dependent manner, and this effect was relatively reversible at lower doses of 0.05–0.5 mM. Higher DQ and the ES caused the permeability of FD-4 to be higher. The cytotoxicity of TM-Bz-CS depended on concentration, %DQ, and %ES. These studies demonstrated that this novel modified chitosan has potential as an absorption enhancer.     

Nanostructured Lipid Carriers (NLC) for Parenteral Delivery of an Anticancer Drug

The purpose of this research was to formulate nanostructured lipid carriers (NLC) for the parenteral delivery of an anticancer drug, all-trans retinoic acid (ATRA). The ATRA was incorporated into NLC by the de novo emulsification method. The effect of the formulation factor, i.e., type and oil ratio, initial ATRA concentration on physicochemical properties was determined. The anticancer efficacy of ATRA-loaded NLC on HL-60 and HepG2 cells was also studied. NLC was formulated using a blend of solid lipids (cetyl palmitate) and liquid lipids (soybean oil (S), medium-chain triglyceride (M), S/oleic acid (O; 3:1) and M/O (3:1)) at a weight ratio of 1:1. ATRA-loaded NLC had an average size of less than 200 nm (141.80 to 172.95 nm) with a narrow PDI and negative zeta potential that was within an acceptable range for intravenous injection. The results indicated that oleic acid enhanced the ATRA-loading capacity of NLC. In vitro ATRA release was only approximately 4.06% to 4.34% for 48 h, and no significant difference in ATRA release rate from all NLC formulations in accordance with the composition of the oil phase. Moreover, no burst release of the drug was observed, indicating that NLC could prolong the release of ATRA. The initial drug concentration affected the photodegradation rate but did not affect the release rate. All ATRA-loaded NLC formulations exhibited the photoprotective property. The cytotoxicity results showed that all ATRA-loaded NLC had higher cytotoxicity than the free drug and HL-60 cells were more sensitive to ATRA than HepG2 cells.     

Structure Relationship of Cationic Lipids on Gene Transfection Mediated by Cationic Liposomes

The aim of this study was to investigate the transfection efficiency of cationic liposomes formulated with phosphatidylcholine (PC) and novel synthesized diethanolamine-based cationic lipids at a molar ratio of 5:1 in comparison with Lipofectamine™ 2000. Factors affecting transfection efficiency and cell viability, including the chemical structure of the cationic lipids, such as different amine head group (diamine and polyamine; and non-spermine and spermine) and acyl chain lengths (C14, C16, and C18) and the weight ratio of liposomes to DNA were evaluated on a human cervical carcinoma cell line (HeLa cells) using the pDNA encoding green fluorescent protein (pEGFP-C2). Characterizations of these lipoplexes in terms of size and charge measurement and agarose gel electrophoresis were performed. The results from this study revealed that almost no transfection was observed in the liposome formulations composed of cationic lipids with a non-spermine head group. In addition, the transfection efficiency of these cationic liposomes was in the following order: spermine-C14 > spermine-C16 > spermine-C18. The highest transfection efficiency was observed in the formulation of spermine-C14 liposomes at a weight ratio of 25; furthermore, this formulation was safe for use in vitro. In conclusion, cationic liposomes containing spermine head groups demonstrated promising potential as gene carriers.Key words: cationic lipids, cationic liposomes, gene transfection     

Fabrication and Evaluation of Nanostructured Herbal Oil/Hydroxypropyl-β-Cyclodextrin/Polyvinylpyrrolidone Mats for Denture Stomatitis Prevention and Treatment

This work aims to develop the herbal oil-incorporated nanostructure mats with antifungal activity for the prevention and treatment of Candida-associated denture stomatitis. The nanofiber mats loaded with betel oil or clove oil were fabricated via electrospinning process. The morphologies and physicochemical properties of the herbal oil loaded nanofiber mats were examined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and mechanical testing. The release characteristic, antifungal activity, and cytotoxicity were also investigated. The SEM images confirmed the homogeneous and smooth nanoscale fibers. The addition of the herbal oil into the nanofiber mats reduced the fiber diameters. The DSC and FT-IR results confirmed the presence of the oil in the nanofiber mats. The herbal oils can be released from the mats in a very fast manner and inhibit the growth of candida cells within only few minutes after contact. These nanofiber mats may be beneficial for the prevention and treatment of denture stomatitis.     

Development of Microemulsions and Microemulgels for Enhancing Transdermal Delivery of <Emphasis Type="Italic">Kaempferia parviflora</Emphasis> Extract

The purpose of this research was to develop microemulsions (ME) and microemulgels (MG) for enhancing transdermal delivery of Kaempferia parviflora (KP) extract. The methoxyflavones were used as markers. Various formulations of ME and MG containing 10% w/v KP extract were prepared, and the in vitro skin permeation and deposition were investigated. The potential ME system containing oleic acid (5% w/v), Tween 20 (20% w/v), PG (40% w/v), and water (35% w/v) was successfully formulated. ME with 10% w/v limonene (ME-L10%) showed higher methoxyflavones flux than ME-L5%, ME-L1%, ME without limonene, and KP extract in water, respectively. ME-L10% was selected for adding a gelling agent to form microemulgels (MG-L10%). However, the high viscosity of the gel formulation might control the diffusion of the compound from gel layer into the skin. Therefore, the liquid formulation provided potential ME droplets to deliver KP extract through the skin. Limonene also plays an effective role on the skin permeation, in which the histological image of the skin treated with ME-L10% exhibited larger space of each flattened keratinocyte layer in the stratum corneum compared to the skin treated with KP extract in water. Moreover, ME-L10% showed good stability. Therefore, ME-L10% was a potential formulation for improving transdermal delivery of KP extract.     

Enhancement of Skin Permeation and Skin Immunization of Ovalbumin Antigen <Emphasis Type="Italic">via</Emphasis> Microneedles

The purpose of this study was to evaluate the use of different types of microneedles and doses of ovalbumin antigen for in vitro skin permeation and in vivo immunization. In vitro skin permeation experiments and confocal laser scanning microscopy revealed that hollow microneedles had a superior enhancing effect on skin permeation compared with a solid microneedle patch and untreated skin by efficiently delivering ovalbumin-fluorescein conjugate into the deep skin layers. The flux and cumulative amount of ovalbumin-fluorescein conjugate at 8 h after administering with various conditions could be ranked as follows: hollow MN; high dose?>?medium dose?>?low dose?>?MN patch; high dose?>?medium dose?>?low dose?>?untreated skin; high dose?>?medium dose?>?low dose?>?without ovalbumin-fluorescein conjugate. As the dose of ovalbumin-fluorescein conjugate was increased to 500 μg, the antigen accumulated in the skin to a greater extent, as evidenced by the increasing green fluorescence intensity. When the hollow microneedle was used for the delivery of ovalbumin into the skin of mice, it was capable of inducing a stronger immunoglobulin G immune response than conventional subcutaneous injection at the same antigen dose. Immunoglobulin G levels in the hollow MN group were 5.7, 11.6, and 13.3 times higher than those of the subcutaneous injection group for low, medium, and high doses, respectively. Furthermore, the mice immunized using the hollow microneedle showed no signs of skin infection or pinpoint bleeding. The results suggest that the hollow MN is an efficient device for delivering the optimal dose of antigen via the skin for successful immunization.