Micropropagation of Dendrocalamus asper {Schult. & Schult. F.} Backer ex k. Heyne): an exotic edible bamboo

Effect of season, media type, carbon source, growth regulators and transplanting media on micropropagation of Dendrocalamus asper, an important bamboo species, was examined. The season of explant collection played an important role in axillary bud sprouting and spring (February?CApril) was found to be the best period for explant collection. Among the different media MS was found to be the best for micropropagation. Maximum numbers (4.83/explant) of shoots were initiated in MS?+?15???M BAP. For shoot multiplication, MS medium supplemented with 10???M BAP and 75???M Adenine sulfate was used. BAP was superior to KIN for both explant establishment, as well as, shoot multiplication. Optimal rooting was achieved in shoots cultured on ? strength MS medium supplemented with 5???M each of IBA and NAA. Regenerated plantlets were acclimatized and hardened in green house using dune sand and vermi-compost (3:1) with 92.34% success and transferred to the field with 100% survival rate. In the field, plants supplied with FYM along with urea showed better growth and development. Macroproliferation, plant multiplication by separating the rooted tillers of well established in vitro raised plantlets after 5 to 6?months of growth in the green house could double the multiplication rate. More than 25000 in vitro raised plants were successfully transferred to the field and no morphological variations in growth were observed, thus proving the potential of tissue culture for raising large scale plantations of D. asper.     

Ascertaining clonal fidelity of micropropagated plants of Dendrocalamus hamiltonii Nees et Arn. ex Munro using molecular markers

Dendrocalamus hamiltonii is a giant, evergreen, clumping, multipurpose bamboo with strong culms which are mainly used for construction, handicrafts and fuel. The tender shoots are also used as food. Overexploitation of existing natural stocks coupled with harvesting of culms before seed formation, a long flowering cycle, irregular and poor seed production, short seed viability, seed sterility, limited availability of offsets and rhizomes and seasonal dependence are some of the major bottlenecks in conventional propagation of this species. Therefore, alternative methods like micropropagation can fill the gap in demand and supply of true-to-type planting material. Recently, our micropropagation protocol for rapid multiplication of D. hamiltonii through axillary bud proliferation using nodal explants from mature culms was standardized, and more than 3,000 plants were transferred to the field. However, somaclonal variations are known to appear in the in vitro-derived clones due to culture-induced stresses. Therefore, the present investigation was conducted to ascertain the effect of the length of in vitro culture age on clonal fidelity of regenerated plants using random amplified polymorphic DNA (RAPD), inter-simple sequence repeat (ISSR), amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers. The genomic DNA samples (i.e. mother plant, in vitro-raised shoots from the 3rd to 30th passage, and in vitro-raised plants transferred to the field) were subjected to PCR amplification using 90 primer combinations (25 each of RAPD, ISSR and SSR, and 15 AFLP primer combinations) of which 76 (23 RAPD, 24 ISSR, 21 SSR and 8 AFLP) markers showed amplified DNA fragments. The 23 RAPD primers produced 162 distinct amplified DNA fragments from 2 (OPE-5) to 16 (OPE-16) fragments per primer, while 24 ISSR primers produced 181 distinct amplified DNA fragments with an average of 7.5 fragments per primer. The number of bands generated by SSR primers varied from 3 (RM-7 and RM-240) to 14 (RM-44), and the eight combinations of AFLP primers produced 369 distinct and scorable amplified DNA fragments with an average of 46.1 fragments per primer. Appearance of monomorphic bands with all the tested primer combinations confirmed the true-to-type nature of the in vitro clones of D. hamiltonii and hence the suitability of the developed micropropagation protocol for commercial-scale plant production.     

Biotechnological interventions in sea buckthorn (Hippophae L.): current status and future prospects

Sea buckthorn (Hippophae L., Elaeagnaceae) is an economically and ecologically important medicinal plant comprising of species which are winter hardy, dioecious, wind-pollinated multipurpose shrubs bearing yellow or orange berries with nitrogen-fixing ability. It grows widely in cold regions of Indian Himalayas, China, Russia, Europe and many other countries. It is commonly known as ‘cold desert gold’ due to its high potential as a bio-resource for land reclamation, reducing soil erosion and its multifarious uses. The wild populations are being used for harvesting economic benefits with negligible plantation efforts. Although this plant has many excellent traits, it is still in an early phase of domestication. This woody plant is prone to many pests and diseases which destroy the plants and halt its commercial production. Limited progress has been made for improvement of sea buckthorn through breeding programs due to long juvenile period and lack of QTL linkage map, which makes screening of mapping populations a time-consuming and labor-intensive task. Conventional propagation methods, i.e. seeds, softwood and hardwood cuttings, and suckers are in place but are cumbersome and season dependent. Therefore, application of modern tools of biotechnology needs to be standardized for harnessing maximum benefits from this nutraceutical plant. Improvement of this genus through genetic transformation requires an efficient regeneration system, which is yet to be standardized. Taxonomic status of the genus is controversial and requires more inputs. Taxonomic delineation of species and subspecies and also the breeding programs can be more robustly addressed using molecular markers. This review summarizes the progress made and suggests some future directions of research for this important fruit species.     

Evaluation of genetic fidelity of in vitro raised plants of Dendrocalamus asper (Schult. & Schult. F.) Backer ex K. Heyne using DNA-based markers

Dendrocalamus asper, an edible bamboo is valued for its tender edible shoots in the food industry. However, overexploitation of natural stands of D. asper coupled with minimal conservation and reforestation efforts has led to its rapid depletion in nature. Therefore protocol for rapid multiplication of D. asper via direct regeneration using nodal segments from mature clumps was standardized and more than 25,000 plants were transferred to the field (Singh et al. 2012a). However, genetic fidelity of these in vitro raised plants needs to be authenticated for commercial scale application of the developed micropropagation protocol. PCR-based molecular markers have emerged as simple, fast, reliable and labor-effective tools for testing the genetic fidelity of in vitro raised plants. This study report the genetic fidelity analysis of in vitro raised plants of D. asper for the first time using arbitrary (Random Amplified Polymorphic DNA, RAPD), semi-arbitrary (Inter-Simple Sequence Repeat, ISSR; Amplified Fragment Length Polymorphism, AFLP), and sequence-based (Simple Sequence Repeat, SSR) markers. Bulked DNA samples of 20 in vitro raised shoots (collected after every three subculture cycles starting from 3rd to 30th passage) and field transferred plantlets were compared with the mother plant DNA using 90 primer combinations (25 each of RAPD, ISSR, SSR, and 15 AFLP) and scorable bands were produced by 78 (22 RAPD, 24 ISSR, 21 SSR, and 11 AFLP) primers. A total of 146 distinct and scorable bands were produced by 22 RAPD primers with an average of 6.6 bands per primer while the number of bands for ISSR primers varied from 3 (ISSR-4 and 9) to 13 (ISSR-17), with an average of 7.1 bands per primer. Similarly, SSR markers also showed wide variation in number of bands, ranging from 2 (RM 261) to 12 (RM 44, 140, and 224) with an average of 7.8 bands. AFLP primer combinations could generate 35–72 bands with an average of 48.7 bands per primer pair. Amplification of monomorphic bands with all primer combinations authenticated the true to type nature of the in vitro raised plants of D. asper which underwent up to 30 subculture passages over a period of approximately 2 years thereby supporting the commercial utilization of the developed micropropagation protocol.     

Mapping novel sources of leaf rust and stripe rust resistance introgressed from Triticum dicoccoides in cultivated tetraploid wheat background

Wild emmer wheat, Triticum dicoccoides, the progenitor of modern tetraploid and hexaploid wheats, is an important resource for new variability for disease resistance genes. T. dicoccoides accession pau4656 showed resistance against prevailing leaf rust and stripe rust races in India and was used for developing stable introgression lines (IL) in T. durum cv Bijaga yellow and named as IL pau16068. F₅ Recombinant inbred lines (F₅ RILs) were developed by crossing IL pau16068 with T. durum cultivar PBW114 and RIL population was screened against highly virulent Pt and Pst pathotypes at the seedling and adult plant stages. Inheritance analyses revealed that population segregated for two genes for all stage resistance (ASR) against leaf rust, one ASR gene against stripe rust and three adult plant resistance (APR) genes for stripe rust resistance. For mapping these genes a set of 483 SSR marker was used for bulked segregant analysis. The markers showing diagnostic polymorphism in the resistant and susceptible bulks were amplified on all RILs. Single marker analysis placed all stage leaf rust resistance genes on chromosome 6A and 2A linked to the SSR markers Xwmc256 and Wpaus268, respectively. Likewise one all stage stripe rust resistance gene were mapped on long arm of chromosome 6A linked to markers 6AL-5833645 and 6AL-5824654 and two APR genes mapped on chromosomes 2A and 2B close to the SSR marker Wpaus268 and Xbarc70, respectively. The current study identified valuable leaf rust and stripe rust resistance genes effective against multiple rust races for deployment in the wheat breeding programme.

     

Developing stress tolerant plants through in vitro selection—An overview of the recent progress

Biotic and abiotic stresses impose a major threat to agriculture. Therefore, the efforts to develop stress-tolerant plants are of immense importance to increase crop productivity. In recent years, tissue culture based in vitro selection has emerged as a feasible and cost-effective tool for developing stress-tolerant plants. Plants tolerant to both the biotic and the abiotic stresses can be acquired by applying the selecting agents such as NaCl (for salt tolerance), PEG or mannitol (for drought tolerance) and pathogen culture filtrate, phytotoxin or pathogen itself (for disease resistance) in the culture media. Only the explants capable of sustaining such environments survive in the long run and are selected. In vitro selection is based on the induction of genetic variation among cells, tissues and/or organs in cultured and regenerated plants. The selection of somaclonal variations appearing in the regenerated plants may be genetically stable and useful in crop improvement. This review focuses on the progress made towards the development of stress-tolerant lines through tissue culture based in vitro selection. Plants have evolved many biochemical and molecular mechanisms to survive under stress conditions. The mechanisms of ROS (reaction oxygen species) generation and removal in plants under biotic and abiotic stress conditions have also been reviewed.     

Assessment of genetic variability through ISSR and RAPD markers in <Emphasis Type="Italic">Commiphora wightii</Emphasis> (Arn.) Bhandari

Commiphora wightii (Arn.) Bhandari is a commercially, medicinally and traditionally important tropical shrub widely used to treat various ailments and disorders. Demand of this plant is increasing in the pharmaceutical and perfumery industries due to the presence of guggulsterone E and Z, two important isomers conferring lipid- and cholesterol-lowering, and anti-cancerous properties. Ruthless and unscientific harvesting of oleo-gum resin by local populations from the wild, with negligible conservation efforts has made this species endangered and led to its inclusion in the Red Data Book of IUCN. It is imperative to have broad information regarding the extent of genetic variability available in the species to accelerate the breeding and conservation programs. Therefore, the present study was undertaken to analyze the extent of genetic variability existing among the C. wightii germplasm collected from Rajasthan and Haryana, the diversity rich Indian states, using ISSR and RAPD markers. A total of 100 (50 each) RAPD and ISSR markers were screened of which 37 RAPD and 43 ISSR primers were able to amplify DNA fragments. RAPD markers were more efficient, detecting 74.16 % polymorphism, compared to ISSR which detected 62.52 % polymorphism. Also, the values of average number of polymorphic bands per assay, polymorphism information content (PIC), diversity index (DI) and marker index (MI) were more for RAPD (7.76, 0.19, 0.38 and 2.53, respectively) than for ISSR (7.02, 0.13, 0.32 and 1.88) markers. The UPGMA dendrogram constructed using individual as well as combined data of the two marker systems separated the collected accessions into two major clusters containing 47 and 4 accessions, respectively, while one accession from Bikaner was not included in any cluster. Genetic similarity values obtained from Jaccard’s coefficient using combined data of both the marker systems were between 0.50 and 0.97. These results indicated the existence of wide genetic variability within this species and can be used for further research in the area of germplasm conservation, population genetics and plant breeding.     

Transfer and mapping of the heat tolerance component traits of <Emphasis Type="Italic">Aegilops speltoides</Emphasis> in tetraploid wheat <Emphasis Type="Italic">Triticum durum</Emphasis>

Aegilops speltoides is an important genetic resource for wheat improvement and has high levels of heat tolerance. A heat-tolerant accession of Ae. speltoides pau3809 was crossed with Triticum durum cv. PDW274, and BC₂F_4-6 backcross introgression lines (BILs) were developed, phenotyped for important physiological traits, genotyped using SSR markers and used for mapping the QTL governing heat tolerance component traits. A set of 90 BILs was selected from preliminary evaluation of a broader set of 262 BILs under heat stress. Phenotyping was conducted for physiological traits such as cell membrane thermostability, chlorophyll content, acquired thermotolerance, canopy temperature and stay green. Much variation for these traits was observed in random as well as selected sets of BILs, and comparison of the BILs with the recurrent parent showed improvement for these traits under normal as well as heat stress conditions, indicating that introgressions from Ae. speltoides might have led to the improvement in the heat tolerance potential of the BILs. Introgression profiling of the 90 BILs using SSR markers identified Ae. speltoides introgression on all the 14 chromosomes with introgressions observed on A as well as B genome chromosomes. QTL mapping identified loci for various heat tolerance component traits on chromosomes 2B, 3A, 3B, 5A, 5B and 7A at significant LOD scores and with phenotypic contributions varying from 11.1 to 28.7 % for different traits. The heat-tolerant BILs and QTL reported in the present study form a potential resource that can be used for wheat germplasm enhancement for heat stress tolerance.