Fluctuating environments impact thermal tolerance in an invasive insect species Bactrocera dorsalis (Diptera: Tephritidae)

The incidence and severity of environmental stressors associated with global climate change are increasing and insects frequently face variability in temperature and moisture regimes at variable spatio-temporal scales. Coincidental with this, is increased thermal and hydric stress on insects as warming increases vapour pressure deficit (VPD), the drying power of the air. While the effects of mean temperatures on fitness are widely documented, fluctuations in both temperature and relative humidity (RH) are largely unexplored. Here, we investigated the effects of dynamic temperature and RH fluctuations (around the mean [28°C; 65% RH]) on low and high thermal tolerance of laboratory-reared adult invasive Bactrocera dorsalis (Hendel) (Diptera: Tephritidae), measured as critical thermal minima (CT_min), critical thermal maxima (CT_max), chill coma recovery time (CCRT) and heat knockdown time (HKDT). Our results show that increased environmental amplitude significantly influenced low and high temperature responses and varied across traits tested. The highest amplitude (δ12°C; 28% RH) compromised CT_min, CCRT and HKDT traits while enhancing CT_max. Similarly, acclimation to δ3°C; 7% RH compromised both low (CT_min and CCRT) and high (CT_max and HKDT) fitness traits. Variations in fitness reported here indicate significant roles of combined thermal and moisture fluctuations on B. dorsalis fitness suggesting caveats that are worthy considering when predicting species responses to climate change. These results are significant for B. dorsalis population phenology, management, quantifying vulnerability to climate variability and may help modelling future biogeographical patterns.     

Diversity and distribution of lepidopteran stemborer species and their host plants in Botswana

Lepidopteran stemborers are amongst the most important insect pests of maize, sorghum and sugarcane in sub-Saharan Africa. With the exception of Chilo partellus (Swinhoe), which was accidentally introduced into Africa, the other stemborer pests are indigenous to the continent and have co-evolved with native grasses and sedges. In addition to pest species, wild habitats harbour diverse non-economic stemborer species, some of which are new to science. However, the diversity and distribution of both non-economic and pest species of stemborer are currently mostly unknown in Botswana. Accordingly, country-wide surveys were conducted during 2014/15 and 2015/16 austral summer to determine species diversity and distribution in cultivated and wild host plants of stemborers in Botswana. A total of 1597 stemborer larvae and 228 pupae were collected, constituting 63.1 and 36.9 larvae and 84.8 and 15.2% pupae from cultivated versus wild habitats, respectively. In addition to C. partellus, Sesamia calamistis Hampson and Eldana saccharina Walker which were previously reported, 12 more stemborer species were recorded for the first time in Botswana, including nine undescribed species. These species were from the Sciomesa, Sesamia and Conicofrontia genera and Tortricidae and Pyralidae families. Fourteen wild host and two cultivated host plant species of stemborers were recorded. Chilo partellus was most abundant (89.5%) in cultivated habitats whilst E. saccharina (33.6%) was most abundant in wild habitats. Stemborer species diversity was higher in wild habitats than cultivated. Current results highlight the significance of wild, especially wetland habitats for ecological functions and conservation of lepidopteran stemborer biodiversity.     

Thermal stress exposure of pupal oriental fruit fly has strong and trait-specific consequences in adult flies

Global climate change is projected to increase the incidence of heat waves, their magnitude and duration resulting in insects experiencing increasing environmental stress in both natural and managed ecosystems. While studies on insect thermal tolerance are rapidly increasing, variation across developmental or juvenile stress cross-stage effects within and across generations remain largely unexplored. Yet in holometabolous insects, heat stress at an early developmental stage may influence performance and survival during later stages. Here, we investigated the effects of pupal mild heat stress on the performance of laboratory-reared adult Bactrocera dorsalis (Hendel) (Diptera: Tephritidae) measured as longevity, critical thermal maximum (CT_max), critical thermal minima (CT_min), heat knockdown time (HKDT) and chill coma recovery time (CCRT). Pupal heat stress significantly influenced performance of B. dorsalis adults resulting in impaired longevity and heat tolerance (CT_max and HKDT) in both sexes with improved and compromised cold tolerance (CT_min and CCRT) in females and males, respectively. These findings highlight the role of juvenile stages in mediating stress responses at adult stages. For B. dorsalis, pupal heat stress largely compromised thermal tolerance implying that the species has limited potential to shift its geographic range in heat prone areas. Significant benefits in cold tolerance in females following heat stress may help in improving survival in the cold in the short-term despite restricted activity to the same traits in males. This study suggests that basal heat tolerance and not short-term compensatory thermal plasticity following heat stress may have aided the recent invasion of B. dorsalis in African landscapes.     

Comparative assessment of the thermal tolerance of spotted stemborer,Chilo partellus (Lepidoptera: Crambidae) and its larval parasitoid,Cotesia sesamiae (Hymenoptera: Braconidae)

Under stressful thermal environments, insects adjust their behavior and physiology to maintain key life‐history activities and improve survival. For interacting species, mutual or antagonistic, thermal stress may affect the participants in differing ways, which may then affect the outcome of the ecological relationship. In agroecosystems, this may be the fate of relationships between insect pests and their antagonistic parasitoids under acute and chronic thermal variability. Against this background, we investigated the thermal tolerance of different developmental stages of Chilo partellus Swinhoe (Lepidoptera: Crambidae) and its larval parasitoid, Cotesia sesamiae Cameron (Hymenoptera: Braconidae) using both dynamic and static protocols. When exposed for 2 h to a static temperature, lower lethal temperatures ranged from ?9 to 6 °C, ?14 to ?2 °C, and ?1 to 4 °C while upper lethal temperatures ranged from 37 to 48 °C, 41 to 49 °C, and 36 to 39 °C for C. partellus eggs, larvae, and C. sesamiae adults, respectively. Faster heating rates improved critical thermal maxima (CT_max) in C. partellus larvae and adult C. partellus and C. sesamiae. Lower cooling rates improved critical thermal minima (CT_min) in C. partellus and C. sesamiae adults while compromising CT_min in C. partellus larvae. The mean supercooling points (SCPs) for C. partellus larvae, pupae, and adults were ?11.82 ± 1.78, ?10.43 ± 1.73 and ?15.75 ± 2.47, respectively. Heat knock‐down time (HKDT) and chill‐coma recovery time (CCRT) varied significantly between C. partellus larvae and adults. Larvae had higher HKDT than adults, while the latter recovered significantly faster following chill‐coma. Current results suggest developmental stage differences in C. partellus thermal tolerance (with respect to lethal temperatures and critical thermal limits) and a compromised temperature tolerance of parasitoid C. sesamiae relative to its host, suggesting potential asynchrony between host–parasitoid population phenology and consequently biocontrol efficacy under global change. These results have broad implications to biological pest management insect–natural enemy interactions under rapidly changing thermal environments.     

Disentangling factors limiting diamondback moth,Plutella xylostella (L.), spatio‐temporal population abundance: A tool for pest forecasting

Data‐mining techniques play an important role in hyperparameter optimization of heterogeneous environmental factors and their relative contribution as determinants of incidences in insect pest ecological studies. A multidimensional field‐based surveillance was conducted in two seasons (24 months), July–June of each season (2015/2016 ‐ season 1 and 2016/2017 ‐ season 2) using sex‐pheromone‐baited traps and Thermocron i‐Buttons to identify key determinants of population abundance of diamondback moth, Plutella xylostella L., across spatial horticultural hotspots of Botswana. The moth is a notorious global brassica pest. Pearson's product moment correlation matrix showed month of the year (M), mean temperature (T_mean) and maximum temperature (T_max) as positively correlated (p < 0.001) to number of moths (N), while minimum temperature (T_min), minimum relative humidity (RH_min), mean relative humidity (RH_mean), maximum relative humidity (RH_max) and host plant (h) were negatively correlated (p < 0.001) to N. Using Waikato Environment for Knowledge Analysis (WEKA) data‐mining techniques, two models were developed: (a) M5P decision‐tree algorithm associated with nine linear models (LMs) and (b) principal component analysis (PCA) based on four principal components. Both approaches identified M as the major predictor of moth abundance, followed by h and farming region (R). However, R was a function of T_max (positive auto‐correlation) and RH_max (negative auto‐correlation). These results provide simplified relative contribution of heterogeneous factors in influencing P. xylostella spatio‐temporal abundance, essential for early warning systems in pest management. This is an important component of sustainable pest management aimed at managing insect pests and minimizing pesticides abuse in brassica production systems.     

Dominance of spotted stemborer Chilo partellus Swinhoe (Lepidoptera: Crambidae) over indigenous stemborer species in Africa's changing climates: ecological and thermal biology perspectives

相似文献   

Superior basal and plastic thermal responses to environmental heterogeneity in invasive exotic stemborer Chilo partellus Swinhoe over indigenous Busseola fusca (Fuller) and Sesamia calamistis Hampson

Lepidopteran stemborers are the most destructive insect pests of cereal crops in sub‐Saharan Africa. In nature, these insects are often exposed to multiple environmental stressors, resulting in potent impact on their thermal tolerance. Such environmental stressors may influence their activity, survival, abundance and biogeography. In the present study, we investigate the effects of acclimation to temperature, starvation and desiccation on thermal tolerance, measured as critical thermal limits [critical thermal minima (CT_min) and maxima (CT_max)] on laboratory‐reared economic pest species Chilo partellus Swinhoe (Lepidoptera: Crambidae), Busseola fusca (Fuller) and Sesamia calamistis Hampson (Lepidoptera: Noctuidae) using established protocols. Low temperature acclimation results in improved CT_min for B. fusca and C. partellus, whereas high temperature acclimation enhances the same trait for B. fusca and S. calamistis. Similarly, high temperature and starvation pretreatment improve CT_max for C. partellus relative to S. calamistis and B. fusca. In addition, starvation and desiccation pretreatments improve CT_min for all stemborer species. Furthermore, rapid cold‐hardening (RCH) enhancs CT_min for B. fusca and C. partellus, whereas rapid heat‐hardening (RHH) improves the same trait for C. partellus. However, RCH and RHH impair CT_max for all stemborer species. These findings show differential thermal tolerances after exposure to heterogeneous environmental stress habitats. Chilo partellus, of exotic origin, shows a higher magnitude of basal thermal tolerance plasticity relative to the indigenous African species S. calamistis and B. fusca. This indicates that C. partellus may have a fitness and survival advantage under climate‐induced heterogeneous environments, and also have a greater chance for geographical range expansion and invasion success compared with the indigenous B. fusca and S. calamistis.