Biosynthesis of intracellular 5-aminolevulinic acid by a newly identified halotolerant <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis>

Of 23 strains of halotolerant (up to 12% w/v NaCl) photosynthetic bacteria isolated from various sources, one isolate, SH5, accumulated intracellular 5-aminolevulinic acid (ALA) at 0.45 μg/g dry cell wt (DCW) growing aerobically in the dark. The strain was identified as Rhodobacter sphaeroides using 16S rDNA sequencing. Biosynthesis of ALA was enhanced to 14 μg/g DCW using modified glutamate/glucose (50 mM) medium with the addition of 10 mM levulinic acid after 24 h cultivation. Addition of 30 μM Fe²⁺ to this medium increased the yield to 226 μg/g DCW.     

Evaluation of methods for preparing hydrogen-producing seed inocula under thermophilic condition by process performance and microbial community analysis

Five methods for preparation of hydrogen-producing seeds (base, acid, 2-bromoethanesulfonic acid (BESA), load-shock and heat shock treatments) as well as an untreated anaerobic digested sludge were compared for their hydrogen production performance and responsible microbial community structures under thermophilic condition (60 degrees C). The results showed that the load-shock treatment method was the best for enriching thermophilic hydrogen-producing seeds from mixed anaerobic cultures as it completely repressed methanogenic activity and gave the a maximum hydrogen production yield of 1.96 mol H(2) mol(-1) hexose with an hydrogen production rate of 11.2 mmol H(2) l(-1)h(-1). Load-shock and heat-shock treatments resulted in a dominance of Thermoanaerobacterium thermosaccharolyticum with acetic acid and butyric acid type of fermentation while base- and acid-treated seeds were dominated by Clostridium sp. and BESA-treated seeds were dominated by Bacillus sp. The comparative experimental results from hydrogen production performance and microbial community analysis showed that the load-shock treatment method was better than the other four methods for enriching thermophilic hydrogen-producing seeds from anaerobic digested sludge. Load-shock treated sludge was implemented in palm oil mill effluent (POME) fermentation and was found to give maximum hydrogen production rates of 13.34 mmol H(2) l(-1)h(-1) and resulted in a dominance of Thermoanaerobacterium spp. Load-shock treatment is an easy and practical method for enriching thermophilic hydrogen-producing bacteria from anaerobic digested sludge.     

In vitro three-stage continuous fermentation of gluco-oligosaccharides produced by Gluconobacter oxydans NCIMB 4943 by the human colonic microflora

Gluco-oligosaccharides produced by Gluconobacter oxydans NCIMB 4943 from maltodextrin as the source, were evaluated for their fermentability by the human colonic microflora. The selectivity of growth of desirable bacteria in the human colon was studied in a three-stage continuous model of the human large intestine. Populations of bacteria, and their fluctuations as a response to the fermentation, were enumerated using fluorescent in situ hybridization (FISH). The gluco-oligosaccharides resulted in increases in numbers of bifidobacteria and the Lactobacillus/Enterococcus group in all 3 vessels of the system, representing the proximal, transverse and distal colonic areas. The prebiotic indices of the gluco-oligosaccharides were 2.29, 4.23 and 2.74 in V1, V2 and V3 respectively.     

Optimization for xylanase and cellulase production from Aspergillus niger ATTC 6275 in palm oil mill wastes and its application

Optimization of enzyme production from Aspergillus niger ATCC 6275 under both submerged and solid-substrate cultivation was investigated. Results from submerged cultivation using palm oil mill effluent revealed that pretreatment of ground palm cake did not improve enzyme production. Addition of 0.60g NH4NO3/l generated maximum activity of xylanase and cellulase (CMCase). The optimum aeration rate was 1.2 v/v min. Under solid-substrate cultivation, the results indicated that heating and alkali treatment of the ground palm cake gave no further improvement in enzyme production. The optimal N-source was 2% urea. Optimal initial moisture contents for xylanase and CMCase activities were 60% and 50% respectively, with temperature optima of 30°C and 35°C, respectively. The optimal inoculum size was 1× 108 spores/g palm cake with an initial pH of 4.5–5.0. The maximum activities of xylanase (282.9U/g) and CMCase (23.8U/g) were obtained under the optimum conditions. Solid-substrate cultivation was a better method for the production of enzyme, particularly xylanase, from A. niger ATCC 6275. The application of these enzymes to decanter effluent showed the separation of oil and grease and suspended solids from the effluent. This is comparable to the result achieved from using the commercial xylase preparation Meicelase and superior to the effect of Sumyzyme.     

Phototropic H<Subscript>2</Subscript> production by a newly isolated strain of <Emphasis Type="Italic">Rhodopseudomonas</Emphasis><Emphasis Type="Italic">palustris</Emphasis>

Rhodopseudomonas palustris TN1 was isolated from Songkhla Lake, Thailand. It phototrophically generates H₂ from the predominant volatile fatty acids (VFAs) produced from microbial dark-fermentations of palm oil milling effluent; yields from 20 mM butyrate, acetate and propionate were 4.7, 2.5, and 1.7 mol H₂ mol VFA⁻¹ with light efficiencies of 1.8, 1, and 0.2%, respectively. Optimum conditions were pH 7 and 3000 lux, although production was reduced by only 33% at 1000 lux. CO₂ evolution never exceeded 9 mmol mol VFA⁻¹.     

Screening and identification of polyhydroxyalkanoates producing bacteria and biochemical characterization of their possible application

Polyhydroxyalkanoates (PHAs) accumulating bacteria were isolated under various selective conditions such as pH, salt concentrations and types of heavy metal. Fifty strains of bacterial isolates were found to belong to Bacillus, Proteus, Pseudomonas, Aeromonas, Alcaligenes and Chromobacterium, based on phenotypical features and genotypic investigation. Only twenty five bacterial isolates were selected and observed for the production of PHAs. Interestingly, bacteria belonging to Firmucutes Bacillus sp. produced a high amount of PHAs. The maximum PHAs were accumulated by B. licheniformis PHA 007 at 68.80% of dry cell weight (DCW). Pseudomonas sp., Aeromonas sp., Alcaligenes sp. and Chromobacterium sp. were recorded to produce a moderate amount of PHAs, varying from 10.00-44.32% of DCW. The enzymatic activity was preliminarily analyzed by the ratio of the clear zone diameter to colony diameter. Bacillus gave the highest ratio of hydrolysis zone which corresponds to the highest hydrolytic enzyme activities. Bacillus licheniformis PHA 007 had the highest lipase and protease activity at 2.1 and 5.1, respectively. However, the highest amylase activity was observed in Bacillus sp. PHA 023 at 1.4. Determination of metabolic characteristics was also investigated to check for their ability to consume a wide range of substrates. Bacillus, Aeromonas sp. and Alcaligenes sp. had great ability to utilize a variety of substrates. To decrease high PHA cost, different sources of cheap substrates were tested for the production of PHAs. Bacillus cereus PHA 008 gave the maximal yield of PHA production (64.09% of DCW) when cultivated in anaerobically treated POME. In addition, the accumulation of PHA copolymers such as 3-hydroxyvalerate and 3-hydroxyhexanoate was also observed in Bacillus and Pseudomomas sp. strain 012 and 045, respectively. Eight of the nine isolates accumulated a significant amount of PHAs when inexpensive carbon sources were used as substrates. Here it varied from 1.69% of DCW by B. licheniformis PHA 007 to 64.09% of DCW by B. cereus PHA 008.     

A rapid method for harvesting and immobilization of oleaginous microalgae using pellet-forming filamentous fungi and the application in phytoremediation of secondary effluent

A rapid method for harvesting and immobilization of oleaginous microalgae using pellet-forming filamentous fungi was developed. The suitable conditions for pellet formation by filamentous fungi were determined. Among the strains tested, Trichoderma reesei QM 9414 showed superior pellet forming ability. Its pellets were used to harvest oleaginous microalga Scenedesmus sp. With increasing volume ratio of fungal pellets to microalgae culture up to 1:2, >94% of microalgal cells were rapidly harvested within 10 min. The ratio of fungal pellets could manipulate both harvesting time and initial concentration of microalgal cells in the pellets. The microalgae–fungal pellets were successfully used as immobilized cells for effective phytoremediation of secondary effluent from seafood processing plants under nonsterile condition. The chemical oxygen demand, total nitrogen, and total phosphorus removal were >74%, >44%, and >93%, respectively. The scanning electron microscopy showed that the microalgal cells were not only entrapped in the pellets but also got attached to the fungal hyphae with sticky exopolysaccharides, possibly secreted by the fungi. The extracted lipids from the pellets were mainly composed of C16–C18 (>83%) with their suitability as biodiesel feedstocks. This study has shown the promising strategy to rapidly harvest and immobilize microalgal cells and the possible application in phytoremediation of industrial effluent.     

Optimization for growth of Rhodocyclus gelatinosus in seafood processing effluents

Tuna condensate was a better substrate than shrimp-blanching water or effluent from a frozen-seafood plant for growing Rhodocyclus gelatinosus under anaerobic conditions in the light. One strain out of four examined, R7, gave the highest biomass (4.0 g/l), cell yield (0.32 g cell/g COD), and COD removal (78%) in 1:10 (v/v) diluted tuna condensate. Shrimp-blanching water added to the tuna condensate further increased growth rate, biomass and COD removal. Optimal growth was at pH 7.0 and 3000 Lux light intensity. Acetate, pyruvate, glucose, glutamate, propionate or malate added to the tuna condensate did not increase cell yield, carotenoid or bacteriochlorophyll content or biomass protein. A maximum cell mass of 5.6 g/l (containing 50% protein) and 86% COD removal were obtained after 5 days' incubation under optimal conditions.     

Isolation and selection of cellulolytic fungi from palm oil mill effluent

Cellulolytic fungi, 34 strains, were isolated from samples taken from palm oil mill residues and effluent, and high cellulase producers selected in comparison with nine known reference strains. Although 13 isolates showed good filter paper distintegration within 14 days, only eight isolates exhibited clearing zones around their colonies on carboxymethylcellulose (CMC) agar medium. Quantitative cellulase activity measurements, using CMC as carbon source, selected three of the eight isolates as potential cellulase producers. Using dried palm oil mill condensate as carbon source, only one of the isolates (F 11) showed similar results on both carbon sources. During media optimization for CMCase production, a four-fold increase from 0.058 to 0.275 U/ml was obtained using a medium, containing 0.1% (v/v) Tween 80 0.02% (w/v) NH₄NO₃, 0.025% (w/v) proteose-peptone and 0.1% (w/v) CMC dissolved in undiluted condensate from the sterilization of oil palm bunches, with an initial pH of 5.5.