Characterization and Cytotoxic Evaluation of Bacteriocins Possessing Antibiofilm Activity Produced by Lactobacillus plantarum SJ33

International Journal of Peptide Research and Therapeutics - Biofilm forming pathogens are among the major causes of hospital-acquired infections and are not much affected by antibiotic treatment....     

Chromium Removal from Aqueous System and Industrial Wastewater by Agricultural Wastes

This study involved the development of formaldehyde-treated, deseeded sunflower head waste–based biosorbent (FSH) for the biosorption of Cr(VI) from aqueous solution and industrial wastewater. Batch-mode experiments were conducted to determine the kinetics, sorption isotherms, effect of pH, initial Cr(VI) concentration, biosorbent dose, and contact time. The results demonstrated that FSH can sequester Cr(VI) from the aqueous solution. The maximum sorption occurred at pH = 2.0, biosorbent dose = 4.0 g/L, concentration of 100 mg/L at 25°C at 180 rpm after 2 h contact time. The FSH had an adsorption capacity of 7.85 mg/g for Cr(VI) removal at pH 2.0. The rate of adsorption was rapid, and equilibrium was attained within 2 h. The equilibrium sorption data fitted the Langmuir isotherm model, which was further confirmed by the chi-square test.     

Utilization of modified silk cotton hull waste as an adsorbent for the removal of textile dye (reactive blue MR) from aqueous solution

Carbon prepared from silk cotton hull was used to remove a textile dye (reactive blue MR) from aqueous solution by an adsorption technique under varying conditions of agitation time, dye concentration, adsorbent dose and pH. Adsorption depended on solution pH, dye concentration, carbon concentration and contact time. Equilibrium was attained with in 60 min. Adsorption followed both Langmuir and Freundlich isotherm models. The adsorption capacity was found to be 12.9 mg/g at an initial pH of 2+/-0.2 for the particle size of 125-250 microm at room temperature (30+/-2 degrees C).     

Isolation and characterization of lactobacilli from some traditional fermented foods and evaluation of the bacteriocins

Lactic acid bacteria (LAB) commonly used in food as starter cultures are known to produce antimicrobial substances such as bacteriocins and have great potential as food biopreservatives. LAB isolated from traditional fermented foods (appam batter and pickles) were screened for bacteriocin production. Two lactobacilli, LABB and LABP (one from each source) producing bacteriocins were characterized. Both the bacilli were homo-fermentative, catalase negative and micro-aerophilic in nature. LABB was found to be a thermobacterium growing at 45 degrees C while LABP was a streptobacterium growing at 15 degrees C. Both were able to grow at pH 4.5-8.6 but were intolerant to high salt concentration. They failed to produce gas from glucose as well as ammonia from arginine. Among the sugars examined they could not ferment arabinose, raffinose, rhamnose or xylose. Additionally, LABB could not ferment esculin, gluconate or mannose. LABB is identified as Lactobacillus acidophilus while LABP as Lb. casei. Their bacteriocins showed a broad inhibitory spectrum against the indicator organisms tested. They were active below pH 8.0 and after autoclaving as well. There was a complete loss of activity when treated with proteolytic enzymes such as trypsin indicating the proteinaceous nature of the active molecules. SDS-PAGE of partially purified bacteriocins indicated the molecular mass of the bacteriocin as 3.8 and 4.5 kDa for LABB and LABP respectively.     

Characterisation of the bacteriocins produced by two probiotic Lactobacillus isolates from idli batter

Lactobacillus plantarum JJ18 and Lactobacillus plantarum subsp. plantarum JJ60, probiotics from idli batter, produce bacteriocins JJ18 and JJ60 having a wide spectrum of activity. After optimising the environmental conditions for bacteriocin production the effect of various media components was determined. Maximum bacteriocin production was observed in MRS broth, pH 6.4 at 37 °C after 36 h. Tryptone (as nitrogen source) and glucose (as carbon source) are required for optimal production of bacteriocins JJ18 and JJ60. Activity was not affected by surfactants like Triton X-100, Tween 80 and Tween 20 or by treatment with NaCl, urea and EDTA. Protease treatment resulted in complete loss of activity of the partially purified bacteriocins JJ18 and JJ60, while lipase and α-amylase had no effect, indicating that the bacteriocin is a simple protein. Tris tricine SDS-PAGE electrophoresis depicted a single band of less than 3.5 kDa. However, the strain Lactobacillus plantarum JJ18 was inhibited by bacteriocin JJ60 and Lactobacillus plantarum JJ60 by bacteriocin JJ18, whereas no inhibition was observed against the respective producer strains, indicating that the two bacteriocins are different. The bacteriocins remained active over a wide range of pH and temperature. The bacteriocins were able to adsorb onto producer and target cells, Lactobacillus plantarum and Listeria monocytogenes and differentially in the presence of various surfactants, salts and solvents. A bactericidal mode of action was observed against Listeria monocytogenes. Given their wide spectrum of activity against various pathogens, the bacteriocins JJ18 and JJ60 can be applied as bio-preservatives in the food industry.     

Removal of heavy metals from industrial wastewaters by adsorption onto activated carbon prepared from an agricultural solid waste

Activated carbon was prepared from coirpith by a chemical activation method and characterized. The adsorption of toxic heavy metals, Hg(II), Pb(II), Cd(II), Ni(II), and Cu(II) was studied using synthetic solutions and was reported elsewhere. In the present work the adsorption of toxic heavy metals from industrial wastewaters onto coirpith carbon was studied. The percent adsorption increased with increase in pH from 2 to 6 and remained constant up to 10. As coirpith is discarded as waste from coir processing industries, the resulting carbon is expected to be an economical product for the removal of toxic heavy metals from industrial wastewaters.     

Utilization of various agricultural wastes for activated carbon preparation and application for the removal of dyes and metal ions from aqueous solutions

Activated carbons were prepared from the agricultural solid wastes, silk cotton hull, coconut tree sawdust, sago waste, maize cob and banana pith and used to eliminate heavy metals and dyes from aqueous solution. Adsorption of all dyes and metal ions required a very short time and gave quantitative removal. Experimental results show all carbons were effective for the removal of pollutants from water. Since all agricultural solid wastes used in this investigation are freely, abundantly and locally available, the resulting carbons are expected to be economically viable for wastewater treatment.     

Investigation of Cr(VI) adsorption onto chemically treated Helianthus annuus: Optimization using Response Surface Methodology

In the present study, chemically treated Helianthus annuus flowers (SHC) were used to optimize the removal efficiency for Cr(VI) by applying Response Surface Methodological approach. The surface structure of SHC was analyzed by Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Analysis (EDX). Batch mode experiments were also carried out to assess the adsorption equilibrium in aqueous solution. The adsorption capacity (q_e) was found to be 7.2 mg/g. The effect of three parameters, that is pH of the solution (2.0-7.0), initial concentration (10-70 mg/L) and adsorbent dose (0.05-0.5 g/100 mL) was studied for the removal of Cr(VI) by SHC. Box-Behnken model was used as an experimental design. The optimum pH, adsorbent dose and initial Cr(VI) concentration were found to be 2.0, 5.0 g/L and 40 mg/L, respectively. Under these conditions, removal efficiency of Cr(VI) was found to be 90.8%.     

Activated carbon prepared from biomass as adsorbent: elimination of Ni(II) from aqueous solution.

Activated carbon (AC) prepared from waste Parthenium was used to eliminate Ni(lI) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out, by varying contact time, metal ion concentration, carbon concentration, pH and desorption to assess kinetic and equilibrium parameters. They allowed initial adsorption coefficient, adsorption rate constant and maximum adsorption capacities to be computed. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Q0) calculated from the Langmuir isotherm was 54.35 mg Ni(II)/g of AC at initial pH of 5.0 and 20 degrees C, for the particle size 250-500 microm. Increase in pH from 2 to 10 increased percent removal of metal ion. The regeneration by HCl of Ni(II)-saturated carbon by HCl, allowed suggestion of an adsorption mechanism by ion-exchange between metal ion and H+ ions on the AC surfaces. Quantitative recovery of Ni(II) was possible with HCl.     

Removal of Cr(VI) from aqueous solution by adsorption onto activated carbon

Laboratory scale experiments were carried out to produce and characterise biofuel from tigernut (Cyperus esculentus) oil. Transesterification of tigernut oil afforded methyl and ethyl esters, which had fuel properties similar to common biofuels, hence tigernut could be utilised as an alternative renewable energy resource.