A validated model of passive skeletal muscle to predict force and intramuscular pressure

The passive properties of skeletal muscle are often overlooked in muscle studies, yet they play a key role in tissue function in vivo. Studies analyzing and modeling muscle passive properties, while not uncommon, have never investigated the role of fluid content within the tissue. Additionally, intramuscular pressure (IMP) has been shown to correlate with muscle force in vivo and could be used to predict muscle force in the clinic. In this study, a novel model of skeletal muscle was developed and validated to predict both muscle stress and IMP under passive conditions for the New Zealand White Rabbit tibialis anterior. This model is the first to include fluid content within the tissue and uses whole muscle geometry. A nonlinear optimization scheme was highly effective at fitting model stress output to experimental stress data (normalized mean square error or NMSE fit value of 0.993) and validation showed very good agreement to experimental data (NMSE fit values of 0.955 and 0.860 for IMP and stress, respectively). While future work to include muscle activation would broaden the physiological application of this model, the passive implementation could be used to guide surgeries where passive muscle is stretched.     

Molecular Evolution of the Telomere-Associated Mal Loci of Saccharomyces

The MAL gene family of Saccharomyces consists of five multigene complexes (MAL1, MAL2, MAL3, MAL4, and MAL6) each of which encodes maltose permease (GENE 1), maltase (GENE 2) and the trans-acting MAL-activator (GENE 3). Four of these loci have been mapped and each is located at or near the telomere of a different chromosome. We compare the physical structure of the MAL loci and their flanking sequences. The MAL loci were shown to be both structurally and functionally homologous throughout an approximately 9.0-kb region. The orientation of the MAL loci was determined to be: CENTROMERE . . . GENE 3-GENE 1-GENE 2 . . . TELOMERE. Telomere-adjacent sequences were found flanking GENE 2 of the MAL1, MAL3 and MAL6 loci. No common repeated elements were found on the centromere-proximal side of all the MAL1, loci. These results suggest that, during the evolution of this polygenic family, the MAL loci translocated to different chromosomes via a mechanism that involved the rearrangement(s) of chromosome termini.     

The rabbit alpha-like globin gene cluster is polymorphic both in the sizes of BamHI fragments and in the numbers of duplicated sets of genes

The alpha-like globin gene cluster in rabbits contains embryonic zeta- globin genes, an adult alpha-globin gene, and theta-globin genes of undetermined function. The basic arrangement of genes, deduced from analysis of cloned DNA fragments, is 5'-zeta 0-zeta 1-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3'. However, the pattern of restriction fragments containing zeta- and theta-globin genes varies among individual rabbits. Analysis of BamHI fragments of genomic DNA from 24 New Zealand white rabbits revealed eight different patterns of fragments containing zeta-globin genes. The large BamHI fragments containing genes zeta 0 and zeta 1 are polymorphic in length, whereas a 1.9-kb fragment containing the zeta 2 gene and the 3.5-kb fragment containing the zeta 3 gene do not vary in size. In contrast to this constancy in the size of the restriction fragments, the copy number of the zeta 2 and zeta 3 genes does vary among different rabbits. No length polymorphism was detected in the BamHI fragments containing the theta-globin genes, but again the copy number varies for restriction fragments containing the theta 2 gene. The alpha 1- and theta 1-globin genes are located in a nonpolymorphic 7.2-kb BamHI fragment. The combined data from hybridization with both zeta and theta probes shows that the BamHI cleavage pattern does not vary within the region 5'-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3', but the pattern genomic blot-hybridization patterns for the progeny of parental rabbits with different zeta-globin gene patterns shows that the polymorphic patterns are inherited in a Mendelian fashion. Two different haplotypes have been mapped based on the genomic blot-hybridization data. The variation in the alpha-like globin gene cluster in the rabbit population results both from differences in the copy number of the duplication block containing the zeta-zeta-theta gene set and from the presence or absence of polymorphic BamHI sites.      

Pure passive hyperextension of the human cadaver knee generates simultaneous bicruciate ligament rupture

Knee hyperextension has been described as a mechanism of isolated anterior cruciate ligament (ACL) tears, but clinical and experimental studies have produced contradictory results for the ligament injuries and the injury sequence caused by the hyperextension loading mechanism. The hypothesis of this study was that bicruciate ligament injuries would occur as a result of knee hyperextension by producing high tibio-femoral (TF) compressive forces that would cause anterior translation of the tibia to rupture the ACL, while joint extension would simultaneously induce rupture of the posterior cruciate ligament (PCL). Six human knees were loaded in hyperextension until gross injury, while bending moments and motions were recorded. Pressure sensitive film documented the magnitude and location of TF compressive forces. The peak bending moment at failure was 108?N?m±46?N?m at a total extension angle of 33.6?deg±11?deg. All joints failed by simultaneous ACL and PCL damages at the time of a sudden drop in the bending moment. High compressive forces were measured in the anterior compartments of the knee and likely produced the anterior tibial subluxation, which contributed to excessive tension in the ACL. The injury to the PCL at the same time may have been due to excessive extension of the joint. These data, and the comparisons with previous experimental studies, may help explain the mechanisms of knee ligament injury during hyperextension. Knowledge of forces and constraints that occur clinically could then help diagnose primary and secondary joint injuries following hyperextension of the human knee.     

Fluid flow induced PGE2 release by bone cells is reduced by glycocalyx degradation whereas calcium signals are not

It has been hypothesized that bone cells have a hyaluronic acid (HA) rich glycocalyx (cell coat or pericellular matrix) and that this contributes to bone cell mechanotransduction via fluid flow. The glycocalyx of bone cells of the MC3T3-E1 osteoblastic cell line and the MLO-Y4 osteocytic cell line were characterized. Alcian blue staining and lectin binding experiments suggested that these cells have a glycocalyx rich in HA. Sulphated proteoglycans were not detected. Staining with hyaluronic acid binding protein and degradation by hyaluronidase confirmed that HA was a major component of the glycocalyx. We subjected cells, with and without hyaluronidase treatment, to oscillating fluid flow under standardized in vitro conditions. There was no effect of glycocalyx degradation on the intracellular calcium signal, in either cell type, in terms of the percentage of cells responding (40-80%) or the magnitude of the response (2-5 times baseline). However, a 4-fold fluid flow induced increase in PGE2 was eliminated by hyaluronidase pre-treatment in MLO-Y4 cells. We conclude that under these conditions the calcium and PGE2 responses occur via different pathways. An intact glycocalyx is not necessary in order to initiate a calcium signal in response to oscillating fluid flow. However, in osteocyte-like cells the PGE2 pathway is more dependent on mechanical signals transmitted through the glycocalyx.     

Impact orientation can significantly affect the outcome of a blunt impact to the rabbit patellofemoral joint

This laboratory has developed a subfracture, joint trauma model in rabbits. Using a dropped impact mass directed onto a slightly abducted joint, chronic softening of retropatellar cartilage and thickening of underlying subchondral bone are documented in studies to 1 year post-insult. It has been hypothesized that these tissue changes are initiated by stresses developed during impact loading. A previous analytical study by this laboratory suggests that tensile strains in retropatellar cartilage can be significantly lowered, without significantly changing the intensity of stresses in the underlying subchondral bone, by reorientation of patellar impact more centrally on the joint. In the current study comparative experiments were performed on groups of animals after either an impact directed on the slightly abducted limb or a more central impact. One-year post-trauma in animals subjected to the central-oriented impact no degradation of the shear modulus for the retropatellar cartilage was documented, but the thickness of the underlying subchondral bone was significantly increased. In contrast, alterations in cartilage and underlying bone following impact on the slightly abducted limb were consistent with previous studies. The current experimental investigation showed the sensitivity of post-trauma alterations in joint tissues to slight changes in the orientation of impact load on the joint. Interestingly, for this trauma model thickening of the underlying subchondral plate occurred without mechanical degradation of the overlying articular cartilage. This supports the current laboratory hypothesis that alterations in the subchondral bone and overlying cartilage occur independently in this animal model.     

Impact responses of the flexed human knee using a deformable impact interface

Blunt impact trauma to the patellofemoral joint during car accidents, sporting activities, and falls can produce a range of injuries to the knee joint, including gross bone fracture, soft tissue injury, and/or microinjuries to bone and soft tissue. Currently, the only well-established knee injury criterion applies to knee impacts suffered during car accidents. This criterion is based solely on the peak impact load delivered to seated cadavers having a single knee flexion angle. More recent studies, however, suggest that the injury potential, its location, and the characteristics of the damage are also a function of knee flexion angle and the stiffness of the impacting structure. For example, at low flexion angles, fractures of the distal patella are common with a rigid impact interface, while at high flexion angles splitting of the femoral condyles is more evident. Low stiffness impact surfaces have been previously shown to distribute impact loads over the anterior surface of the patella to help mitigate gross and microscopic injuries in the 90 deg flexed knee. The objective of the current study was to determine if a deformable impact interface would just as effectively mitigate gross and microscopic injuries to the knee at various flexion angles. Paired experiments were conducted on contralateral knees of 18 human cadavers at three flexion angles (60, 90, 120 deg). One knee was subjected to a fracture level impact experiment with a rigid impactor, and the opposite knee was impacted with a deformable interface (3.3 MPa crush strength honeycomb material) to the same load. This (deformable) impact interface was effective at mitigating gross bone fractures at approximately 5 kN at all flexion angles, but the frequency of split fracture of the femoral condyles may not have been significantly reduced at 120 deg flexion. On the other hand, this deformable interface was not effective in mitigating microscopic injuries observed for all knee flexion angles. These new data, in concert with the existing literature, suggest the chosen impact interface was not optimal for knee injury protection in that fracture and other minor injuries were still produced. For example, in 18 cadavers a total of 20 gross fractures and 20 subfracture injuries were produced with a rigid interface and 5 gross fractures and 21 subfracture injuries with the deformable interface selected for the current study. Additional studies will be needed to optimize the knee impact interface for protection against gross and microscopic injuries to the knee.     

Out of Africa and back again: nested cladistic analysis of human Y chromosome variation

We surveyed nine diallelic polymorphic sites on the Y chromosomes of 1,544 individuals from Africa, Asia, Europe, Oceania, and the New World. Phylogenetic analyses of these nine sites resulted in a tree for 10 distinct Y haplotypes with a coalescence time of approximately 150,000 years. The 10 haplotypes were unevenly distributed among human populations: 5 were restricted to a particular continent, 2 were shared between Africa and Europe, 1 was present only in the Old World, and 2 were found in all geographic regions surveyed. The ancestral haplotype was limited to African populations. Random permutation procedures revealed statistically significant patterns of geographical structuring of this paternal genetic variation. The results of a nested cladistic analysis indicated that these geographical associations arose through a combination of processes, including restricted, recurrent gene flow (isolation by distance) and range expansions. We inferred that one of the oldest events in the nested cladistic analysis was a range expansion out of Africa which resulted in the complete replacement of Y chromosomes throughout the Old World, a finding consistent with many versions of the Out of Africa Replacement Model. A second and more recent range expansion brought Asian Y chromosomes back to Africa without replacing the indigenous African male gene pool. Thus, the previously observed high levels of Y chromosomal genetic diversity in Africa may be due in part to bidirectional population movements. Finally, a comparison of our results with those from nested cladistic analyses of human mtDNA and beta-globin data revealed different patterns of inferences for males and females concerning the relative roles of population history (range expansions) and population structure (recurrent gene flow), thereby adding a new sex-specific component to models of human evolution.      

The influence of specimen length on the tensile failure properties of tendon collagen

Connective tissues such as ligament, tendon and skin are composites of strength-bearing collagen fibers embedded in a hydrated matrix. The tensile response and failure properties of rat-tail tendon are thought to represent those of the collagen fiber itself. In this study, the tensile failure properties of rat-tail tendon (tendon collagen) were determined for specimens of various test length. The experimental results indicated that failure strain, based on the test grip-to-grip dimension, and failure strain energy density decreased as specimen length increased. The failure stress, on the other hand, did not change appreciably with specimen length. Thus, tensile failure data cannot simply be normalized by the grip-to-grip length of the test specimen. Experimental data from various laboratories must clearly document the length of the test specimen.     

Assignment of orthologous relationships among mammalian alpha-globin genes by examining flanking regions reveals a rapid rate of evolution

In order to study the relationships among mammalian alpha-globin genes, we have determined the sequence of the 3' flanking region of the human alpha 1 globin gene and have made pairwise comparisons between sequenced alpha-globin genes. The flanking regions were examined in detail because sequence matches in these regions could be interpreted with the least complication from the gene duplications and conversions that have occurred frequently in mammalian alpha-like globin gene clusters. We found good matches between the flanking regions of human alpha 1 and rabbit alpha 1, human psi alpha 1 and goat I alpha, human alpha 2 and goat II alpha, and horse alpha 1 and goat II alpha. These matches were used to align the alpha-globin genes in gene clusters from different mammals. This alignment shows that genes at equivalent positions in the gene clusters of different mammals can be functional or nonfunctional, depending on whether they corrected against a functional alpha-globin gene in recent evolutionary history. The number of alpha-globin genes (including pseudogenes) appears to differ among species, although highly divergent pseudogenes may not have been detected in all species examined. Although matching sequences could be found in interspecies comparisons of the flanking regions of alpha- globin genes, these matches are not as extensive as those found in the flanking regions of mammalian beta-like globin genes. This observation suggests that the noncoding sequences in the mammalian alpha-globin gene clusters are evolving at a faster rate than those in the beta-like globin gene clusters. The proposed faster rate of evolution fits with the poor conservation of the genetic linkage map around alpha-globin gene clusters when compared to that of the beta-like globin gene clusters. Analysis of the 3' flanking regions of alpha-globin genes has revealed a conserved sequence approximately 100-150 bp 3' to the polyadenylation site; this sequence may be involved in the expression or regulation of alpha-globin genes.