Three-Dimensional Flow of an Oldroyd-B Fluid with Variable Thermal Conductivity and Heat Generation/Absorption

This paper looks at the series solutions of three dimensional boundary layer flow. An Oldroyd-B fluid with variable thermal conductivity is considered. The flow is induced due to stretching of a surface. Analysis has been carried out in the presence of heat generation/absorption. Homotopy analysis is implemented in developing the series solutions to the governing flow and energy equations. Graphs are presented and discussed for various parameters of interest. Comparison of present study with the existing limiting solution is shown and examined.     

Interactions of Ralstonia solanacearum and Pectobacterium carotovorum with Meloidogyne incognita on potato

Effect of interactions of Meloidogyne incognita with Ralstonia solanacearum and interaction of M. incognita with Pectobacterium carotovorum were studied in sequential and simultaneous inoculations on potato (Solanum tuberosum). Inoculation of M. incognita caused a lesser reduction in plant growth than caused by R. solanacearum. Inoculation of M. incognita plus R. solanacearum caused a greater reduction in plant growth than the damage caused by either pathogen. Inoculation of M. incognita prior to R. solanacearum resulted in a greater reduction in plant growth than R. solanacearum was inoculated prior to M. incognita. However, inoculation of M. incognita or P. carotovorum caused similar reduction in plant growth. Inoculation of P. carotovorum prior to M. incognita caused lesser reduction in plant growth than simultaneous inoculation of both pathogens. Inoculation of M. incognita caused galling in potato roots but the size of galls was small. Inoculation of P. carotovorum or R. solanacearum with M. incognita had adverse effect on galling and nematode multiplication. Wilting or soft rot index was 3 when R. solanacearum or P. carotovorum was inoculated alone. In other treatments, where R. solanacearum or P. carotovorum was inoculated with M. incognita, wilting or soft rot indices were 5.     

Influence of organic additives on the incidence of root-knot nematode,Meloidogyne javanica in roots of tomato plants

Glasshouse experiment was conducted to assess the impact of green chopped leaves of four test plants (Lantana camara, Ficus virens, Kigelia pinnata and Ficus bengalensis) and two nematicides (Phorate and Carbofuran) on the plant growth parameters of tomato cv. K25 and on the root-knot development. Results revealed that all the tested treatments significantly (p = 0.05) improved plant growth parameters and reduced root-knot development compared to control. Among the tested organic additives, chopped green leaves of Lantana camara added to soil gave the highest enhancement in plant growth parameters, including plant height, fresh and dry weight, number of fruits and fruit weight with the values of 94.2 cm, 106.8 g, 31.6 g, 7.2 and 153.3 g respectively, as well as a greater reduction of Meloidogyne javanica reproduction and development but exhibiting a lower response compared to nematicides. There was also significant reduction in root-knot development in tomato plants growing in other organic additive amended soil.     

Design and Synthesis of Fluoroacylshikonin as an Anticancer Agent

A series of shikonin derivatives, selectively acylated by various fluorinated carboxylic acids at the side chain of shikonin, were synthesized and their anticancer activity evaluated, in which eight compounds are reported for the first time. Among all the compounds tested, compound S7 showed the most potent anticancer activity against B16‐F10 (malignant melanoma cells), MG63 (human osteosarcoma cells), and A549 (lung cancer cells) with IC₅₀ 0.39 ± 0.01, 0.72 ± 0.04 and 0.58 ± 0.02 µmol/L. Docking simulation of compound S7 was carried out to position S7 into a tubulin active site to determine the probable binding conformation. All the results suggested that compound S7 may be a potential anticancer agent. Chirality 25:757–762, 2013. © 2013 Wiley Periodicals, Inc.     

Mazaedium evolution in the Ascomycota (Fungi) and the classification of mazaediate groups of formerly unclear relationship

Calicioid or mazaediate fungi constitute a heterogeneous assemblage of fungi sharing the presence of a mazaedium. These fungi were once treated as an order (Caliciales) of the Ascomycota but many are now known to be nested within the Arthoniomycetes, Eurotiomycetes, Lecanoromycetes and Leotiomycetes. In this study we employ multigene phylogenetic analyses of main mazaediate groups (based on nuclear 18S, 28S, 5.8S rDNA, mitochondrial 16S, and the protein coding RPB1 and Mcm7) of 116 taxa corresponding to most major groups of the inoperculate ascomycetes (“Leotiomyceta”) and a selection of Pezizomycetes, to trace the evolution of the mazaedium in the Pezizomycotina (the “Euascomycetes”). In particular, we studied the placement of three calicioid groups of uncertain position, Calycidiaceae, Coniocybaceae and Microcaliciaceae. Here, we show that the Calycidiaceae is closely related to the Sphaerophoraceae in the Lecanoromycetidae (Lecanoromycetes), as supported by overall morphology and the production of sphaerophorin. The Coniocybaceae constitute an early divergent line in the inoperculate ascomycetes and here we propose to recognize this group formally as the new class and order Coniocybomycetes, Coniocybales. The Microcaliciaceae is nested within the Ostropomycetidae (Lecanoromycetes). Both Coniocybaceae and Microcaliciaceae, although highly distinctive, lack morphological similarities to related main fungal groups. Ancestral state reconstruction suggests that the ancestor of all inoperculate ascomycetes and the ancestor of all main inoperculate ascomycete groups, with the exception of the Coniocybomycetes, was non‐mazediate, and thus confirms the large amount of parallel evolution and independent gains of the mazaedium in the history of the Ascomycota.     

Zinc oxide-doped poly(urethane) spider web nanofibrous scaffold via one-step electrospinning: a novel matrix for tissue engineering

Zinc oxide (ZnO) nanostructures have been commonly studied for electronic purposes due to their unique piezoelectric and catalytic properties; however, recently, they have been also exploited for biomedical applications. The purpose of this study was to fabricate ZnO-doped poly(urethane) (PU) nanocomposite via one-step electrospinning technique. The utilized nanocomposite was prepared by using colloidal gel composed of ZnO and PU, and the obtained mats were vacuum dried at 60 °C overnight. The physicochemical characterization of as-spun composite nanofibers was carried out by X-ray diffraction pattern, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron probe microanalysis, and transmission electron microscopy, whereas the thermal behavior was analyzed by thermogravimetric analysis. The viability, attachment, and proliferation of NIH 3T3 mouse fibroblast cells on the ZnO/PU composite nanofibers were analyzed by in vitro cell compatibility test. The morphological features of the cells attached on nanofibers were examined by Bio-SEM. We conclude that the electrospun nanofibrous scaffolds with unique spider nets had good biocompatibility. Cytotoxicity experiments indicated that the mouse fibroblasts could attach to the nanocomposite after being cultured. Thus, the current work demonstrates that the as-synthesized ZnO/PU hybrid nanofibers represent a promising biomaterial to be exploited for various tissue engineering applications.     

Antibacterial and Cytotoxic Efficacy of Extracellular Silver Nanoparticles Biofabricated from Chromium Reducing Novel OS4 Strain of Stenotrophomonas maltophilia

Biofabricated metal nanoparticles are generally biocompatible, inexpensive, and ecofriendly, therefore, are used preferably in industries, medical and material science research. Considering the importance of biofabricated materials, we isolated, characterized and identified a novel bacterial strain OS4 of Stenotrophomonas maltophilia (GenBank: {"type":"entrez-nucleotide","attrs":{"text":"JN247637.1","term_id":"341941875","term_text":"JN247637.1"}}JN247637.1). At neutral pH, this Gram negative bacterial strain significantly reduced hexavalent chromium, an important heavy metal contaminant found in the tannery effluents and minings. Subsequently, even at room temperature the supernatant of log phase grown culture of strain OS4 also reduced silver nitrate (AgNO₃) to generate nanoparticles (AgNPs). These AgNPs were further characterized by UV–visible, Nanophox particle size analyzer, XRD, SEM and FTIR. As evident from the FTIR data, plausibly the protein components of supernatant caused the reduction of AgNO₃. The cuboid and homogenous AgNPs showed a characteristic UV-visible peak at 428 nm with average size of ∼93 nm. The XRD spectra exhibited the characteristic Bragg peaks of 111, 200, 220 and 311 facets of the face centred cubic symmetry of nanoparticles suggesting that these nanoparticles were crystalline in nature. From the nanoparticle release kinetics data, the rapid release of AgNPs was correlated with the particle size and increasing surface area of the nanoparticles. A highly significant antimicrobial activity against medically important bacteria by the biofabricated AgNPs was also revealed as decline in growth of Staphylococcus aureus (91%), Escherichia coli (69%) and Serratia marcescens (66%) substantially. Additionally, different cytotoxic assays showed no toxicity of AgNPs to liver function, RBCs, splenocytes and HeLa cells, hence these particles were safe to use. Therefore, this novel bacterial strain OS4 is likely to provide broad spectrum benefits for curing chromium polluted sites, for biofabrication of AgNPs and ultimately in the nanoparticle based drug formulation for the treatment of infectious diseases.