Biosorption of Cr(VI) by Ceratocystis paradoxa MSR2 Using Isotherm Modelling,Kinetic Study and Optimization of Batch Parameters Using Response Surface Methodology

This study is focused on the possible use of Ceratocystis paradoxa MSR2 native biomass for Cr(VI) biosorption. The influence of experimental parameters such as initial pH, temperature, biomass dosage, initial Cr(VI) concentration and contact time were optimized using batch systems as well as response surface methodology (RSM). Maximum Cr(VI) removal of 68.72% was achieved, at an optimal condition of biomass dosage 2g L⁻¹, initial Cr(VI) concentration of 62.5 mg L⁻¹ and contact time of 60 min. The closeness of the experimental and the predicted values exhibit the success of RSM. The biosorption mechanism of MSR2 biosorbent was well described by Langmuir isotherm and a pseudo second order kinetic model, with a high regression coefficient. The thermodynamic study also revealed the spontaneity and exothermic nature of the process. The surface characterization using FT-IR analysis revealed the involvement of amine, carbonyl and carboxyl groups in the biosorption process. Additionally, desorption efficiency of 92% was found with 0.1 M HNO₃. The Cr(VI) removal efficiency, increased with increase in metal ion concentration, biomass concentration, temperature but with a decrease in pH. The size of the MSR2 biosorbent material was found to be 80 μm using particle size analyzer. Atomic force microscopy (AFM) visualizes the distribution of Cr(VI) on the biosorbent binding sites with alterations in the MSR2 surface structure. The SEM-EDAX analysis was also used to evaluate the binding characteristics of MSR2 strain with Cr(VI) metals. The mechanism of Cr(VI) removal of MSR2 biomass has also been proposed.     

Non-linear control of continuous bioreactors

Control of bioreactors has achieved importance in the recent years. This may be due to the fact that they are difficult to control which may be attributed to its nonlinear dynamic behavior. The model parameters of the bioreactor also vary in an unpredictable manner. The complexity of the biochemical processes inhibits the accurate modeling and also the lack of suitable sensors make the process state difficult to characterize. Considerable emphasis has been placed on the control of fed-batch fermentors because of their prevalence in industries. However, when production of biomass is to be optimized, continuous operation is desirable. Several procedures are available for the nonlinear control of processes, viz., differential geometric approach, internal model control approach, reference synthesis technique, predictive control design, etc., but the major disadvantage of these approaches is the computational time required to perform the prediction optimization. In this study, a nonlinear controller based on a polynomial discrete time model (NARMAX) is evaluated for its performance on a fermentor. It can be shown that a nonlinear self-tuning controller based on NARMAX model can be extended to the control of fermentors. The response is smooth for both load and setpoint changes even when process parameters are assumed to be zero and uncertainty in parameters are present and in the presence of controller constraints. The control action can be made more or less robust by changing the design parameters appropriately. Therefore, nonlinear self-tuning controller is suitable for control of industrial processes.     

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

MXene, a new class of 2D materials, has gained significant attention owing to its attractive electrical conductivity, tunable work function, and metallic nature for wide range of applications. Herein, delaminated few layered Ti₃C₂T_x MXene contacted Si solar cells with a maximum power conversion efficiency (PCE) of ≈11.5% under AM1.5G illumination are demonstrated. The formation of an Ohmic junction of the metallic MXene to n⁺‐Si surface efficiently extracts the photogenerated electrons from n⁺np⁺‐Si, decreases the contact resistance, and suppresses the charge carrier recombination, giving rise to excellent open‐circuit voltage and short‐circuit current density. The rapid thermal annealing process further improves the electrical contact between Ti₃C₂T_x MXene and n⁺‐Si surface by reducing sheet resistance, increasing electrical conductivity, and decreasing cell series resistance, thus leading to a remarkable improvement in fill factor and overall PCE. The work demonstrated here can be extended to other MXene compositions as potential electrodes for developing highly performing solar cells.     

Microalgae metabolites: A rich source for food and medicine

Microalgae are one of the important components in food chains of aquatic ecosystems and have been used for human consumption as food and as medicines. The wide diversity of compounds synthesized from different metabolic pathways of fresh and marine water algae provide promising sources of fatty acids, steroids, carotenoids, polysaccharides, lectins, mycosporine-like amino acids, halogenated compounds, polyketides, toxins, agar agar, alginic acid and carrageenan. This review discusses microalgae used to produce biological substances and its economic importance in food science, the pharmaceutical industry and public health.     

Lipidomic Analysis of α-Synuclein Neurotoxicity Identifies Stearoyl CoA Desaturase as a Target for Parkinson Treatment

1. Download high-res image (214KB)
2. Download full-size image

     

Treatment of W. bancrofti (Wb) in HIV/Wb Coinfections in South India

BackgroundThe disease course of human immunodeficiency virus (HIV) is often altered by existing or newly acquired coincident infections.Conclusions/SignificanceWe were unable to find a significant effect of W. bancrofti infection or its treatment on HIV clinical course or surrogate markers of HIV disease progression though we recognized that our study was limited by the smaller than predicted sample size and by the use of ART in half of the patients. Treatment of W. bancrofti coinfection in HIV positive subjects (as is usual in mass drug administration campaigns) did not represent an increased risk to the subjects, and should therefore be considered for PLWHA living in W. bancrofti endemic areas.

Trial Registration

ClinicalTrials.gov {"type":"clinical-trial","attrs":{"text":"NCT00344279","term_id":"NCT00344279"}}NCT00344279