Head impact exposure in male and female collegiate ice hockey players

The purpose of this study was to quantify head impact exposure (frequency, location and magnitude of head impacts) for individual male and female collegiate ice hockey players and to investigate differences in exposure by sex, player position, session type, and team. Ninety-nine (41 male, 58 female) players were enrolled and 37,411 impacts were recorded over three seasons. Frequency of impacts varied significantly by sex (males: 287 per season, females: 170, p<0.001) and helmet impact location (p<0.001), but not by player position (p=0.088). Head impact frequency also varied by session type; both male and female players sustained more impacts in games than in practices (p<0.001), however the magnitude of impacts did not differ between session types. There was no difference in 95th percentile peak linear acceleration between sexes (males: 41.6 g, females: 40.8 g), but 95th percentile peak rotational acceleration and HITsp (a composite severity measure) were greater for males than females (4424, 3409 rad/s², and 25.6, 22.3, respectively). Impacts to the back of the helmet resulted in the greatest 95th percentile peak linear accelerations for males (45.2 g) and females (50.4 g), while impacts to the side and back of the head were associated with the greatest 95th percentile peak rotational accelerations (males: 4719, 4256 rad/sec², females: 3567, 3784 rad/sec² respectively). It has been proposed that reducing an individual's head impact exposure is a practical approach for reducing the risk of brain injuries. Strategies to decrease an individual athlete's exposure need to be sport and gender specific, with considerations for team and session type.     

Identification and characterization of alkali-tolerant clostridia isolated from biodeteriorated casein-containing building materials

Summary Reports on malodour in buildings constructed in the late 1970s gave rise to thorough investigations on the possible role of vapours of chemical compounds emitted by building materials. The odour could be related to the use of casein as an additive to improve the fluidity of concrete materials used as a self-levelling floor topping compound. Casein was suggested to be degraded by microorganisms, resulting in an accumulation of malodorous substances in the topping compounds.Bacteria isolated from biodeteriorated concrete materials containing caseins exhibited unusual tolerance towards high pH. Two dominant species were found among a total of 80 sporeforming, anaerobic isolates from concrete and raw products of caseins, namely Clostridium bifermentans and Clostridium sporogenes. C. bifermentans had a maximal pH tolerance of 12.2 while C. sporogenes could reproduce up to pH 11.7. The study includes the identification of the clostridia with API multitest as well as an investigation of the volatile organic acid and monoamine patterns. About 100 cfu clostridia/g material could be obtained during the isolation procedures.     

The use of poly(L-proline)-Sepharose in the isolation of profilin and profilactin complexes

In the purification of proline hydroxylase by affinity chromatography on poly(L-proline)-Sepharose it was found earlier that two other components, profilin and the complex profilin-actin, also bind with high affinity to this matrix. We have exploited this observation to develop a rapid procedure for the isolation of profilin and profilin-actin complexes in high yields directly from high-speed supernatants of crude tissue-extracts. Through an extensive search for elution conditions, avoiding poly(L-proline) as the desorbant, we have found that active proteins can be recovered from the affinity column with a buffer containing 30% dimethyl sulphoxide. Subsequent chromatography on hydroxylapatite separates free profilin and the two isoforms of profilactin, profilin-actin_β and profilin-actin_γ. The profilin-actin complexes produced this way have high specific activities in the DNAase-inhibition assay, give rise to filaments on addition of Mg²⁺, and can be crystallized. From the isolated profilin-actin complexes the β- and γ-actin isoforms of non-muscle cells can easily be prepared in a polymerization competent form. Pure profilin is either obtained from an excess pool present in some extracts or by dissociation of profilin-actin complexes and removal of the actin.     

Large-Scale Production of Nanographite by Tube-Shear Exfoliation in Water

The number of applications based on graphene, few-layer graphene, and nanographite is rapidly increasing. A large-scale process for production of these materials is critically needed to achieve cost-effective commercial products. Here, we present a novel process to mechanically exfoliate industrial quantities of nanographite from graphite in an aqueous environment with low energy consumption and at controlled shear conditions. This process, based on hydrodynamic tube shearing, produced nanometer-thick and micrometer-wide flakes of nanographite with a production rate exceeding 500 gh^-1 with an energy consumption about 10 Whg^-1. In addition, to facilitate large-area coating, we show that the nanographite can be mixed with nanofibrillated cellulose in the process to form highly conductive, robust and environmentally friendly composites. This composite has a sheet resistance below 1.75 Ω/sq and an electrical resistivity of 1.39×10^-4 Ωm and may find use in several applications, from supercapacitors and batteries to printed electronics and solar cells. A batch of 100 liter was processed in less than 4 hours. The design of the process allow scaling to even larger volumes and the low energy consumption indicates a low-cost process.     

Alleged Approach-Avoidance Conflict for Food Stimuli in Binge Eating Disorder

ObjectiveFood stimuli are omnipresent and naturally primary reinforcing stimuli. One explanation for the intake of high amounts of food in binge eating disorder (BED) is a deviant valuation process. Valuation of food stimuli is supposed to influence approach or avoidance behaviour towards food. Focusing on self-reported and indirect (facial electromyography) valuation process, motivational aspects in the processing of food stimuli were investigated.MethodsWe compared an overweight sample with BED (BED+) with an overweight sample without BED (BED-) and with normal weight controls (NWC) regarding their self-reported and indirect (via facial electromyography) valuation of food versus non-food stimuli.ResultsRegarding the self-reported valuation, the BED+ sample showed a significantly stronger food-bias compared to the BED- sample, as food stimuli were rated as significantly more positive than the non-food stimuli in the BED+ sample. This self-reported valuation pattern could not be displayed in the indirect valuation. Food stimuli evoked negative indirect valuation in all groups. The BED+ sample showed the plainest approach-avoidance conflict marked by a diverging self-reported (positive) and indirect (negative) valuation of food stimuli.ConclusionsBED+ showed a deviant self-reported valuation of food as compared to BED-. The valuation process of the BED+ sample seems to be characterized by a motivational ambivalence. This ambivalence should be subject of further studies and may be of potential use for therapeutic interventions.     

Head impact exposure in collegiate football players

In American football, impacts to the helmet and the resulting head accelerations are the primary cause of concussion injury and potentially chronic brain injury. The purpose of this study was to quantify exposures to impacts to the head (frequency, location and magnitude) for individual collegiate football players and to investigate differences in head impact exposure by player position. A total of 314 players were enrolled at three institutions and 286,636 head impacts were recorded over three seasons. The 95th percentile peak linear and rotational acceleration and HITsp (a composite severity measure) were 62.7g, 4378rad/s(2) and 32.6, respectively. These exposure measures as well as the frequency of impacts varied significantly by player position and by helmet impact location. Running backs (RB) and quarter backs (QB) received the greatest magnitude head impacts, while defensive line (DL), offensive line (OL) and line backers (LB) received the most frequent head impacts (more than twice as many than any other position). Impacts to the top of the helmet had the lowest peak rotational acceleration (2387rad/s(2)), but the greatest peak linear acceleration (72.4g), and were the least frequent of all locations (13.7%) among all positions. OL and QB had the highest (49.2%) and the lowest (23.7%) frequency, respectively, of front impacts. QB received the greatest magnitude (70.8g and 5428rad/s(2)) and the most frequent (44% and 38.9%) impacts to the back of the helmet. This study quantified head impact exposure in collegiate football, providing data that is critical to advancing the understanding of the biomechanics of concussive injuries and sub-concussive head impacts.     

Protein release from galactoglucomannan hydrogels: influence of substitutions and enzymatic hydrolysis by beta-mannanase

O-Acetyl-galactoglucomannan (AcGGM) is the major soft-wood hemicellulose. Structurally modified AcGGM and hydrogels of AcGGM were prepared. The degree of substitution (DS) of AcGGM was modified enzymatically with alpha-galactosidase, and chemically with an acrylate derivative, 2-hydroxyethylmethacrylate (HEMA). The hydrolysis of AcGGM with beta-mannanase was shown to increase with decreasing DS. AcGGM hydrogels were prepared from chemically modified AcGGM with varying DS of HEMA. Bovine serum albumin (BSA) was encapsulated in hydrogels. A spontaneous burst release of BSA was decreased with increased DS of HEMA. The addition of beta-mannanase significantly enhanced the BSA release from hydrogels with a DS of 0.36, reaching a maximum of 95% released BSA after eight hours compared to 60% without enzyme. Thus, both the pendant group composition and the enzyme action are valuable tools in the tailoring of hydrogel release profiles of potential interest for intestine drug delivery.     

A strategy for the covalent functionalization of resorbable polymers with heparin and osteoinductive growth factor

The chemical strategy presented herein is the nondestructive preparation of resorbable polymer scaffolds with heparin covalently bonded to the surface and an osteoinductive growth factor, recombinant human bone morphogenetic protein-2, immobilized in the heparin layer. The coupling scheme involves functionalization of surfaces by grafting in the vapor phase with poly( l-lactide) and poly(-caprolactone) films chosen as representative substrates. The biocompatibility of functionalized surfaces was verified by a much improved attachment and proliferation of mesenchymal stem cells (MSC).     

Quantitative evaluation by minisequencing and microarrays reveals accurate multiplexed SNP genotyping of whole genome amplified DNA

Whole genome amplification (WGA) procedures such as primer extension preamplification (PEP) or multiple displacement amplification (MDA) have the potential to provide an unlimited source of DNA for large-scale genetic studies. We have performed a quantitative evaluation of PEP and MDA for genotyping single nucleotide polymorphisms (SNPs) using multiplex, four-color fluorescent minisequencing in a microarray format. Forty-five SNPs were genotyped and the WGA methods were evaluated with respect to genotyping success, signal-to-noise ratios, power of genotype discrimination, yield and imbalanced amplification of alleles in the MDA product. Both PEP and MDA products provided genotyping results with a high concordance to genomic DNA. For PEP products the power of genotype discrimination was lower than for MDA due to a 2-fold lower signal-to-noise ratio. MDA products were indistinguishable from genomic DNA in all aspects studied. To obtain faithful representation of the SNP alleles at least 0.3 ng DNA should be used per MDA reaction. We conclude that the use of WGA, and MDA in particular, is a highly promising procedure for producing DNA in sufficient amounts even for genome wide SNP mapping studies.     

PDZ domain interaction controls the endocytic recycling of the cystic fibrosis transmembrane conductance regulator

The C terminus of CFTR contains a PDZ interacting domain that is required for the polarized expression of cystic fibrosis transmembrane conductance regulator (CFTR) in the apical plasma membrane of polarized epithelial cells. To elucidate the mechanism whereby the PDZ interacting domain mediates the polarized expression of CFTR, Madin-Darby canine kidney cells were stably transfected with wild type (wt-CFTR) or C-terminally truncated human CFTR (CFTR-DeltaTRL). We tested the hypothesis that the PDZ interacting domain regulates sorting of CFTR from the Golgi to the apical plasma membrane. Pulse-chase studies in combination with domain-selective cell surface biotinylation revealed that newly synthesized wt-CFTR and CFTR-DeltaTRL were targeted equally to the apical and basolateral membranes in a nonpolarized fashion. Thus, the PDZ interacting domain is not an apical sorting motif. Deletion of the PDZ interacting domain reduced the half-life of CFTR in the apical membrane from approximately 24 to approximately 13 h but had no effect on the half-life of CFTR in the basolateral membrane. Thus, the PDZ interacting domain is an apical membrane retention motif. Next, we examined the hypothesis that the PDZ interacting domain affects the apical membrane half-life of CFTR by altering its endocytosis and/or endocytic recycling. Endocytosis of wt-CFTR and CFTR-DeltaTRL did not differ. However, endocytic recycling of CFTR-DeltaTRL was decreased when compared with wt-CFTR. Thus, deletion of the PDZ interacting domain reduced the half-life of CFTR in the apical membrane by decreasing CFTR endocytic recycling. Our results identify a new role for PDZ proteins in regulating the endocytic recycling of CFTR in polarized epithelial cells.