Sulfamethizole attenuates poloxamer 407-induced atherosclerotic neointima formation via inhibition of mTOR in C57BL/6 mice

Mammalian target of Rapamycin C1 (mTORC1) inhibition limits plaque progression in atherosclerosis. The present study evaluated the protective effect of sulfamethizole on poloxamer 407-induced atherosclerotic neointima formation in C57BL/6 mice via mTOR inhibition. Poloxamer 407 (P-407) (0.5 g/kg body weight) was administered intraperitoneally to male C57BL/6 mice every third day for 148 days to induce chronic hyperlipidemia. From Day 121 to 148, animals were additionally administered Sulfamethizole (5, 10, and 50 mg/kg, p.o.), Rapamycin (0.5 mg/kg, positive control), or vehicle (1 ml/kg). Plasma lipid levels were measured on Days 120 and 148. Upon sacrifice, histological studies were performed, and aortic tissue interleukin (IL)-6, tumor necrosis factor-α (TNF-α), and mTOR levels were evaluated. A molecular docking study was carried out to mimic the interaction of sulfamethizole with mTOR protein. Chronic P-407 administration significantly (p < 0.001) elevated plasma lipid levels, compared with those of the normal control group. Chronic hyperlipidemia resulted in increased tunica intima thickness, collagen deposition, and IL-6, TNF-α, and mTOR levels. Treatment with Sulfamethizole attenuated these parameters significantly in a dose-dependent manner. Molecular docking studies showed a significant interaction of Sulfamethizole with mTOR. In conclusion, this study suggests that sulfamethizole significantly limits poloxamer 407-induced atherosclerotic neointima formation in C57BL/6 mice via mTOR inhibition.     

Spatial Configuration and Composition of Charge Modulates Transport into a Mucin Hydrogel Barrier

The mucus barrier is selectively permeable to a wide variety of molecules, proteins, and cells, and establishes gradients of these particulates to influence the uptake of nutrients, the defense against pathogens, and the delivery of drugs. Despite its importance for health and disease, the criteria that govern transport through the mucus barrier are largely unknown. Studies with uniformly functionalized nanoparticles have provided critical information about the relevance of particle size and net charge for mucus transport. However, these particles lack the detailed spatial arrangements of charge found in natural mucus-interacting substrates, such as certain viruses, which may have important consequences for transport through the mucus barrier. Using a novel, to our knowledge, microfluidic design that enables us to measure real-time transport gradients inside a hydrogel of mucins, the gel-forming glycoprotein component of mucus, we show that two peptides with the same net charge, but different charge arrangements, exhibit fundamentally different transport behaviors. Specifically, we show that certain configurations of positive and negative charges result in enhanced uptake into a mucin barrier, a remarkable effect that is not observed with either charge alone. Moreover, we show that the ionic strength within the mucin barrier strongly influences transport specificity, and that this effect depends on the detailed spatial arrangement of charge. These findings suggest that spatial charge distribution is a critical parameter to modulate transport through mucin-based barriers, and have concrete implications for the prediction of mucosal passage, and the design of drug delivery vehicles with tunable transport properties.     

Hybrid Adeno-Associated Viral Vectors Utilizing Transposase-Mediated Somatic Integration for Stable Transgene Expression in Human Cells

Recombinant adeno-associated viral (AAV) vectors have been shown to be one of the most promising vectors for therapeutic gene delivery because they can induce efficient and long-term transduction in non-dividing cells with negligible side-effects. However, as AAV vectors mostly remain episomal, vector genomes and transgene expression are lost in dividing cells. Therefore, to stably transduce cells, we developed a novel AAV/transposase hybrid-vector. To facilitate SB-mediated transposition from the rAAV genome, we established a system in which one AAV vector contains the transposon with the gene of interest and the second vector delivers the hyperactive Sleeping Beauty (SB) transposase SB100X. Human cells were infected with the AAV-transposon vector and the transposase was provided in trans either by transient and stable plasmid transfection or by AAV vector transduction. We found that groups which received the hyperactive transposase SB100X showed significantly increased colony forming numbers indicating enhanced integration efficiencies. Furthermore, we found that transgene copy numbers in transduced cells were dose-dependent and that predominantly SB transposase-mediated transposition contributed to stabilization of the transgene. Based on a plasmid rescue strategy and a linear-amplification mediated PCR (LAM-PCR) protocol we analysed the SB100X-mediated integration profile after transposition from the AAV vector. A total of 1840 integration events were identified which revealed a close to random integration profile. In summary, we show for the first time that AAV vectors can serve as template for SB transposase mediated somatic integration. We developed the first prototype of this hybrid-vector system which with further improvements may be explored for treatment of diseases which originate from rapidly dividing cells.     

Application of biomaterials to advance induced pluripotent stem cell research and therapy

Derived from any somatic cell type and possessing unlimited self-renewal and differentiation potential, induced pluripotent stem cells (iPSCs) are poised to revolutionize stem cell biology and regenerative medicine research, bringing unprecedented opportunities for treating debilitating human diseases. To overcome the limitations associated with safety, efficiency, and scalability of traditional iPSC derivation, expansion, and differentiation protocols, biomaterials have recently been considered. Beyond addressing these limitations, the integration of biomaterials with existing iPSC culture platforms could offer additional opportunities to better probe the biology and control the behavior of iPSCs or their progeny in vitro and in vivo. Herein, we discuss the impact of biomaterials on the iPSC field, from derivation to tissue regeneration and modeling. Although still exploratory, we envision the emerging combination of biomaterials and iPSCs will be critical in the successful application of iPSCs and their progeny for research and clinical translation.     

Common variants of xeroderma pigmentosum genes and prostate cancer risk

The genetic basis of prostate cancer (PC) is complex and appears to involve multiple susceptibility genes. A number of studies have evaluated a possible correlation between several NER gene polymorphisms and PC risk, but most of them evaluated only single SNPs among XP genes and the results remain inconsistent. Out of 94 SNPs located in seven XP genes (XPA–XPG) a total of 15 SNPs were assayed in 720 unselected patients with PC and compared to 1121 healthy adults. An increased risk of disease was associated with the XPD SNP, rs1799793 (Asp312Asn) AG genotype (OR = 2.60; p < 0.001) and with the AA genotype (OR = 531; p < 0.0001) compared to the control population. Haplotype analysis of XPD revealed one protective haplotype and four associated with an increased disease risk, which showed that the A allele (XPD rs1799793) appeared to drive the main effect on promoting prostate cancer risk. Polymorphism in XPD gene appears to be associated with the risk of prostate cancer.     

Diverse Metastable Structures Formed by Small Oligomers of α-Synuclein Probed by Force Spectroscopy

Oligomeric aggregates are widely suspected as toxic agents in diseases caused by protein aggregation, yet they remain poorly characterized, partly because they are challenging to isolate from a heterogeneous mixture of species. We developed an assay for characterizing structure, stability, and kinetics of individual oligomers at high resolution and sensitivity using single-molecule force spectroscopy, and applied it to observe the formation of transient structured aggregates within single oligomers of α-synuclein, an intrinsically-disordered protein linked to Parkinson’s disease. Measurements of the molecular extension as the proteins unfolded under tension in optical tweezers revealed that even small oligomers could form numerous metastable structures, with a surprisingly broad range of sizes. Comparing the structures formed in monomers, dimers and tetramers, we found that the average mechanical stability increased with oligomer size. Most structures formed within a minute, with size-dependent rates. These results provide a new window onto the complex α-synuclein aggregation landscape, characterizing the microscopic structural heterogeneity and kinetics of different pathways.     

Multifarious plant growth promoting characteristics of chickpea rhizosphere associated Bacilli help to suppress soil-borne pathogens

Wilt and root rot are the major constraints in chickpea production and very difficult to manage through agrochemicals. Hence, for an ecofriendly and biological management, 240 strains of Bacillus and Bacillus derived genera were isolated from chickpea rhizosphere, further narrowed down to 14 strains on the basis of in vitro production of indole acetic acid, siderophore, phosphate solubilization, hydrolytic enzymes and were evaluated for antagonism against chickpea pathogens (Fusarium oxysporum f. sp. ciceri race 1, F. solani and Macrophomina phaseolina). The strains were identified on the basis of physiological characters and 16S RNA gene sequencing. The genotypic comparisons of strains were determined by BOX-polymerase chain reaction profiles and amplified rDNA restriction analysis. These isolates were evaluated in greenhouse assay in which B. subtilis (B-CM191, B-CV235, B-CL-122) proved to be effective in reducing wilt incidence and significant enhancement in growth (root and shoot length) and dry matter of chickpea plants. PCR amplification of bacillomycin (bmyB) and β-glucanase genes suggests that amplified genes from the Bacillus could have a role to further define the diversity, ecology, and biocontrol activities in the suppression of soil-borne pathogens.     

D-M-D Plasmonic Anti-Reflector for Next-Generation Thin c-Si Solar Cell Applications

Plasmonics - In this paper, focus is on the light trapping surface in crystalline silicon (c-Si) solar cells where thinner c-Si wafers are expected to be used by industry to reduce the cost of cell...     

Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion,IV: Affinisol™ HPMC HME Polymers

Most cellulosic polymers cannot be used as carriers for preparing solid dispersion of drugs by hot melt extrusion (HME) due to their high melt viscosity and thermal degradation at high processing temperatures. Three HME-grade hydroxypropyl methylcelluloses, namely Affinisol™ HPMC HME 15 cP, Affinisol™ HPMC HME 100 cP, and Affinisol™ HPMC HME 4 M, have recently been introduced by The Dow Chemical Co. to enable the preparation of solid dispersion at lower and more acceptable processing temperatures. In the present investigation, physicochemical properties of the new polymers relevant to HME were determined and compared with that of Kollidon^® VA 64. Powder X-ray diffraction (PXRD), modulated differential scanning calorimetry (mDSC), thermogravimetric analysis (TGA), moisture sorption, rheology, and torque analysis by melt extrusion were applied. PXRD and mDSC showed that the Affinisol™ polymers were amorphous in nature. According to TGA, the onset of degradation for all polymers was >220°C. The Affinisol™ polymers exhibited less hygroscopicity than Kollidon^® VA 64 and another HPMC polymer, Methocel™ K100LV. The complex viscosity profiles of the Affinisol™ polymers as a function of temperature were similar. The viscosity of the Affinisol™ polymers was highly sensitive to the shear rate applied, and unlike Kollidon^® VA 64, the viscosity decreased drastically when the angular frequency was increased. Because of the very high shear rate encountered during melt extrusion, Affinisol™ polymers showed capability of being extruded at larger windows of processing temperatures as compared to that of Kollidon^® VA 64.KEY WORDS: Affinisol™ HPMC HME, hot melt extrusion, hydroxypropyl methylcellulose, solid dispersion, thermal analysis, viscosity